Used Drill Table for sale (49,301)

Condition: new, ALZMETALL Alztronic 16 table drilling machine Condition: new Availability: Immediately from the Offenburg warehouse Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thrust 190 mm Column diameter 65 mm Manual feed Drill head height adjustment via handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional special equipment: - Digital drilling depth indicator - Machine light Optional accessories: Gjdpfjxd Tugsx Afijbu - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table

Condition: good (used), Year of construction: 1983, machine/vehicle number: 5763, Offer 24590 Technical data: - Drilling capacity 22 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 – 710 – 1400 - 2800 rpm - Throat depth 210 mm - Machine table 480 x 420 mm - Min. / max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg Gedpfxovxg Rue Afiebu

Condition: used, Vertical Drill Vavex 220V Gbodpew Ry Dpsfx Afiju Spindle travel: 70 mm Motor power: 550 W Supply voltage: 220V Drill chuck for bits: 3-16 mm Variable speed via belts: 260–3100 rpm Dimensions: -height: 90 cm -width: -depth: Weight: 60 kg

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Gjdowk Nxqjpfx Afiebu Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: new, Drilling capacity cast iron / steel ----- 35 / 30 mm Tapping capacity cast iron / steel ----- 22 / 20 mm Motor ----- 1.5 kW Speed range ----- 75 ~ 3200 rpm Spindle stroke ----- 130 mm Spindle adaptor ----- MK4 Cross table ----- 600 x 190 mm Foot ----- 650 x 450 mm Diameter T-slots ----- 12 mm Maximum distance spindle - table ----- 610 mm Maximum distance spindle - foot ----- 1180 mm Gsdpfx Asq E N Uxjfisbu Weight ----- 390 kg INCLUDING * LED work light * Cooling system * Digital depth stop * Tapping function * 2-speed motor 75-3200 rpm * CE plug * Toolbox with various tools

Condition: good (used), Maximum length of the drilled part 1600mm Maximum width of the drilled element 450mm 1 horizontal drilling unit 3 spindles 15mm apart 2 vertical drilling unit 3 spindles 22mm apart Gbjdpjttri Esfx Afiou 3 vertical drilling unit 3 spindles spacing 32mm 4 vertical drilling unit 4 spindles (3 spacing 22mm - 1 spacing 32 perpendicular to the others) 5 vertical drilling unit 3 spindles spacing 32mm 6 horizontal drilling unit 3 spindles spacing 15mm

Condition: new, ALZMETALL Alzstar 18-T/S, Manufacturer. Alzmetall Type: Alzstar 18-T/S Condition: New Drilling capacity in St 60: 18 mm, Thread cutting in St 60: M 12, Thread cutting in GG 20: M 14, Short spindle: MK 2, Spindle speed: 225-4,300 rpm, Spindle stroke: 80 mm, Throw: 190 mm, Column diameter: 65 mm, Machine table - usable support: 300x240 mm, Gsdpfx Afexd Trroiebu T-slots number - width - distance: 2 x 12 x 80 mm, Distance spindle-machine table min./max.: 75/357 mm, Machine base plate usable support: 300x240 mm, T-slots number - width - distance: 2 x 12 x 80 mm, Distance Spindle base plate min./max.: 437/437 mm, Feed by hand, Machine table height adjustment: hand crank, Total power requirement: 0.37/0.55 kW, Machine height: 840 mm, Weight: 110 kg Standard equipment: Main switch with motor protection switch, lockable Reversing switch for clockwise and counterclockwise rotation Infinitely variable speed adjustment Protection class IP 54 Mushroom push button (latching) for EMERGENCY STOP Spindle protection with electrical protection Optional: - LED machine light - Under table - Drill chuck 1-13 or 3-16 Available now. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: new, Optimum OPTIdrill DH 40CT column gear drilling machine with cross table 3034349 Gbjdpfx Afst N Rkpoisu The versatile machines for milling and drilling. TECHNICAL DATA General information Tightening rod M 16 Dimensions and weights Column diameter 115mm Length (product) approx. 1060mm Width/depth (product) approx. 745mm Height (product) approx. 2090mm Weight (net) approx. 370kg Drilling capacity Drilling capacity steel (S235JR) 32mm Continuous drilling capacity steel (S235JR) 25mm Tapping capacity steel (S235JR) M 16 End mill size max. 25mm Cutter head size max. 76mm Drilling table Drilling table work surface length 730mm Drilling table work surface width 210mm Drilling table T-slot size 14mm Drilling table T-slots quantity 3 Drilling table T-slot spacing 63mm Load capacity drilling table 50kg Distance spindle - drilling table max.600mm Speed range Speed range 95 - 3200min¯¹ Number of speed ranges 2 x 6 steps Electrical data Drive motor power 1.1 / 1.5kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max.1180mm Machine foot working surface length 495mm Machine foot working surface width 375mm Machine foot T-slot size 14mm Machine foot T-slots quantity 2 Machine foot T-slot distance 230mm Machine foot length 670mm Machine foot width 470mm Spindle Quill stroke 120mm quill diameter 75mm Spindle holder MK 4 throat 280mm Drill head rotation 360 Drill head inclination 45° Manual quill feed Drill head height adjustment 260mm Travel distance Manual X-axis travel 480mm Manual Y-axis travel 180mm Manual Z-axis travel 560mm SCOPE OF DELIVERY Sprocket chuck 1 - 13 mm / B 16 T-nuts Adapter MK 4-MK 3 Arbor MK 4 / B16 Operating tool

Condition: good (used), Heavy duty column drill, gear driven with automatic feed . Spindle mount ISO-40 Gbjdpfjlrp Shsx Afieu

Condition: new, Motor ----- 750W - 230V - 1Phase Drilling capacity ----- 20 mm Pole stroke ----- 85 mm Spindle attachment ----- MK2 Number of speeds ----- 16 Spindle speed ----- 220-2840 rpm Work table ----- 305 x 305 mm Foot ----- 460 x 280 mm Column diameter ----- 72 mm Overall height ----- 990 mm Weight ----- 60 kg Packing ----- 820 x 500 x 290 mm INCLUDING * Digital depth stop * CE hood * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaptor Gbodpfjk Iuqysx Afiju * Drive key

Condition: new, Year of construction: 2023, Alzmetall Alztronic i16 table drilling machine 5" touch display Condition: new Call us and ask us about special discounts or send us your request by email with your contact information and we will get back to you. 5" or 7" display with scratch-resistant glass surface - Optimal readability for the operator - Simple and uniform operator guidance using pictograms - Manual input of spindle speed - target value - Speed display - actual value - Integrated drilling depth display with touch zero point transfer (drilling start) - Virtual drilling depth scale in the display - Machine status displays and warnings in the display (safety)• Main switch, lockable - Right and left rotation through contactor control - Control voltage 24 V - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Spindle braking function - ALZTRONIC only (safety) - Adjustable display timeout Standard Equipment: -AC motor 230 V, 50 Hz Gbjdpfxexd Tqbo Afiou -Infinitely variable speed adjustment -Reversing switch for right-left rotation -Spindle protection with electrical protection -On/off button with lockable emergency stop flap -Connection plug, cable length 3m -Paint: structural paint light gray RAL 7035, anthracite RAL 7016, white aluminum RAL 9006 Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thread 190 mm Column diameter 65 mm Manual feed Drill head height adjustment by handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table For self-collection. Forklift available. Shipping also possible. Errors, changes and prior sale reserved. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: new, Motor ----- 550W - 230V - 1Phase Drilling capacity ----- 16 mm Pole stroke ----- 85 mm Spindle attachment ----- MK2 Number of speeds ----- 16 Spindle speed ----- 220-2840 rpm Worktable ----- 290 x 290 mm Foot ----- 420 x 250 mm Column diameter ----- 72 mm Overall height ----- 980 mm Gbsdpfx Ajk Iuzisfiou Weight ----- 47 kg Packing ----- 820 x 500 x 290 mm INCLUDING * Digital depth stop * CE hood * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaptor * Drive key

Condition: new, Motor ----- 750W - 230V - 1Phase Drilling capacity ----- 20 mm Pin stroke ----- 82 mm Gjdpfx Afoga T E Ujisbu Spindle mounting ----- MK2 Variable speed Spindle speed ----- 400 ~ 2000 rpm Work table ----- 305 x 305 mm Foot ----- 460 x 280 mm Column diameter ----- 72 mm Overall height ----- 990 mm Weight ----- 61 kg Packaging ----- 820 x 500 x 290 mm INCLUDED * Digital depth stop * Digital spindle display * CE cover * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaption * Driven wedge

Condition: used, Year of construction: 2015, functionality: fully functional, DrillMatic TA325/P/H/12/2/1/-180° rotating hydraulic/pneumatic index table 400x620 Manufacturer: DrillMatic Type: TA325/P/H/12/2/1/-180° Air connection: 4 ports. Index values: 3 4 6 8 12 Gbodoukg Sropfx Afiou Year of manufacture: 2015 Weight: 66 kg Table size: 400x620mm

Condition: new, Year of construction: 2010, Center of spindle to wall or column 235 mm Column diameter 60 mm Gjdpfx Afew Spc Reisbu Size of table plate 290 x 290 mm Motor output 1 kW Speed 50 - 4000 U/min. weight of the machine ca. 72 kg

Condition: used, Double drilling mitre saw, with adjustable vertical blades, 2 lower drilling heads, 2 upper drilling heads Gsdsv Tnihspfx Afijbu

Condition: good (used), Year of construction: 1992, Ref. -No.: 10582 Manufacturer: SCHARMANN Type: FB 75 Opticut Year of construction: 1992 Type of control: CNC Control: Heidenhain 426 Storage location: Halberstadt Country of origin: Germany Machine-No.: 141XXXX X-Travel: 850 mm Gbjdpfxew Thnuo Afisu Y-Travel: 1000 mm Z-Travel: 700 mm Tool Taper: SK 40 Turning Speeds: 15 - 1250 RPM spindle quill: 75 mm

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 3000mm/2300mm/1600mm, travel W: 700mm, max. table-to-spindle distance: 2300mm, table dimensions X/Y: 1800mm/2200mm, max. table load: 10000kg, spindle diameter: 130mm, spindle speed: 2500rpm, rapid traverse X/Y/Z: 10m/min, rapid traverse W/B: 5000mm/min/500mm/min, feed X/Y/Z: 4m/min, tool holder: BT50, tool positions: 38, positioning accuracy X/Y/Z: +/-0.008mm, positioning accuracy W: +/-0.012mm, repeatability X/Y/Z: +/-0.004mm, repeatability W: +/-0.008mm. Machine dimensions X/Y/Z: approx. 7050mm/7200mm/4800mm, weight: approx. 37000kg, control: TOSNUC-888. Documentation available. An on-site inspection is possible. Gbsdpfxjxf Ikrs Afisu

Condition: good (used), Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Tiltable: 90° Dimensions LxWxH, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg Item no.: WW12214 Gbodod Tticepfx Afiju

Condition: used, Bench drilling and tapping machine FLOTT type TBZ 15 GL Serial no. 32177027 Year of manufacture 1986 Drilling capacity 15 mm Spindle holder MK2 throat 195 mm Gsdpfx Aodzp S Nsfiobu Pinol stroke 80 mm Table size 275 x 200 mm Column diameter 70 mm Spindle speed 80 - 4500 rpm 18 steps Motor power 0.55 + 0.75 kW Mains connection 380 Volt, 50 Hz - 6 belt speeds from the motor and 2 belt speeds to the drill spindle 2 motor speeds - 3 guide cartridges 0.7mm + 0.8mm and 28G available - Drill head height adjustment via crank with rack and pinion on the column - Original metal base Space requirement L x W x H 700 x 350 x 1850 mm Weight approx. 150 kg good condition

Condition: excellent (used), Normal drilling capacity 20 mm Continuous drilling capacity in St 60-2 / E 335 18 mm Spindle holder MK 2 10 spindle speeds 240 - 3800 rpm. Drilling depth 100 mm Projection 215 mm distance spindle/table up to 360 mm distance spindle/base plate 560 mm table surface 350 x 290 mm Column diameter 75 mm Motor pole-changing 0.6/1.2 kW Total height 1050 mm Weight 100 kg Today's new price: 4.022,00 € net Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Gjdpfx Ajfzbkhefijbu D-44143 Dortmund - Wambel

Year of construction: 2010, condition: ready for operation (used), Pneumatic pressure: 8bar, connected load: 2kW, weight: 550kg, without documentation, spare parts or accessories, was maintained regularly. Gjdemccwfspfx Afiebu

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Gsdofbt Huopfx Afisbu Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Year of construction: 1989, condition: ready for operation (used), Two similar TOS CNC bench drilling machines (built in 1986 and 1989) with the same parameters are available. Travel X/Y/Z/W: 1200mm/1100mm/1000mm/600mm, spindle diameter: 100mm, tool holder: ISO 50, max. table load: 3000kg, table: rotary table, accuracy X/Y/Z: +/-0.02mm, control: Heidenhain TNC 135, including various angles, cutter heads, milling cutters, tool holders and other items. Documentation available. On-site inspection is possible. Individual sale possible. Gsdsvyr I Iepfx Afijbu

Condition: ready for operation (used), Spindle diameter: 90mm, boring spindle longitudinal adjustment: 700mm, spindle head vertical adjustment: 1250mm, speed: 1000rpm, rapid traverse: 2600mm/min. Table swivel range: 360°, table clamping surface X/Y: 1100mm/1400mm, table cross travel: 1800mm, table longitudinal travel: 1250mm, max. table load: 4000kg, bed dimensions X/Y: 3380mm/1800mm. Machine dimensions X/Y/Z: approx. 4650mm/3900mm/3000mm. Documentation available. An on-site inspection is possible. Gbsdpew N Shqofx Afiju