Used Dovetail Cutter for sale (2,907)

Condition: excellent (used), Year of construction: 2000, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumrik 840D, table length: 6,500 mm, power: 2.2 kW (2.99 HP), overall weight: 7,500 kg, total length: 14,000 mm, total width: 3,000 mm, total height: 2,000 mm, Laser cutter ADIGE - LT652 MACH-ID 9637 Make: ADIGE Type: LT652 Pedpfxoy U If Ro Amkopt Control: Siemens Sinumrik 840D Year: 2000 in feed 6500 mm length Max profile 140 x 140 mm Rofin resonator 2200 W Under power inspection posible ! Working area X Axis:6500mm Power resonator: 2.2kW / Amp Length: 14000mm Width: 3000mm Height: 2000mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, control type: CNC control, controller manufacturer: SIEMENS, controller model: SIEMENS 840D, laser power: 4,400 W, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 170 mm, feed rate X-axis: 80,000 m/min, feed rate Y-axis: 80,000 m/min, overall weight: 20,000 kg, total length: 12,000 mm, total width: 6,000 mm, total height: 6,500 mm, Laser cutter BYSTRONIC - ByLaser 4400 MACH-ID 9635 Make: BYSTRONIC Type: ByLaser 4400 Control: SIEMENS 840D Year: 2010 BYSTRONIC BYTRANS Loading arms with change position BYSTRONIC BYTOWER Plate storrage  Change Table foir in and out feed manipulation Dust collector 5.0 inch cutting head 7.5 inch cutting head Under power insopections possible ! Podpfx Amey U Httskspt Working area X Axis: 3048mm Working area Y Axis: 1524mm Working area Z axis: 170mm Table Length: 3000mm Table Width: 1500mm Power resonator: 4.4kW / Amp Feed rate X-Axis: 80000mm/min. Feed rate Y-Axis: 80000mm/min. Sheet master loading arm:Yes, BYTRANS Sheet tower storage: Tes, BYTOWER Dust collector: Yes Cutting hours: 26000H Length: 12000mm Width: 6000mm Height: 6500mm Weight: 20000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Psdpfx Aevvi Iqjmkopt

Condition: good (used), Year of construction: 1980, Joint cutter, diesel joint cutter, asphalt cutter -Saw blades: 2 -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E-Start Pjdpeb A Hv Dofx Amkept -infinitely variable feed

Year of construction: 1997, condition: excellent (used), Ref: 11107 . 1997 Bobst SP 104 E Excellent condition, ex Swiss print house, only 32,500 hours worked! Now fully cleaned & checked by specialist engineer. Die cutting machine with stripping and blanking. Equipped with: Automatic feeder Double-sheet sensor Central line for quick job change Bobst C.U.B. electronic control system. E. (Bobst Electronic Control Unit) Micrometric adjustment Quick Lock cutting chase 1-4 mm cutting plate Micrometric Adjusting Upper pull-out stripping frames Central pull-out stripping frame Lower pull-out stripping frames Upper and lower stripping hardware Non-stop device Automatic waste removal apron Synchronization device timing the sheet arrival against the front lays Lateral adjustment for suction device Pull guide OOS Chase changer Auto delivery with non stop Specification: Speed: 8000 sheets/h Pressure: 2,5 MN (250 tones) Sheet size: 104 x 74 cm max.40 x 35 cm min., sheet thickness: 0,4 cm, Punching with gripper margin: 104 x 71 cm Punching without gripper margin: 104 x 74 margin adjustable: 9-17 mm Ppsdsy Uyb Rspfx Amkot Embossing format: 104 x 71 cm Punching line height: 23,8 mm, Height of embossing plate: 6.35 / 7 mm Material: Paper from 80/90 g/m², Solid board 250 to 2000 g/m² Corrugated board E and B up to 4 mm.

Condition: used, Year of construction: 1999, machine/vehicle number: 99268-1, Product number: 2144 Ppjdpfsin Ufhsx Amkot Type: K120U Serial number: 99268-1 Year of construction: 1999 Bowl: 120 liter Speeds: 2 on knife, 2 on bowl, 2 mixing speeds Power: 3 x 400V, 50Hz, 97A Dimensions: 2050 x 1250 x 1250 mm Weight: 1385 kg With DGA33 control indicator With unloader

Condition: used, 6 knives emptier DC 6 motor 130 A dimensions (l x w x h) : ± 2.000 x 1.900 x 2.400 mm Psdpfx Amjy Ur Dkokept

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. Podpoy Umkfofx Amkopt The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Year of construction: 2012, condition: used, Technical details: Number of working hours: ca. 700 h number: Rotormesserhalter: 5 number: Stattormesserhalter: 4 Rotor-Ø: 440 mm material: PET control voltage: 24 VDC kW Cutting mill (shredder) The plastic granulator is intended for industrial use. Application: Size reduction of all kinds of plastics, such as ABS, POM, PA6, PE, PP, PG and PET Plant consists of a granulator with belts and a bottle bunker. Material is fed into the bunker via feeding belt Hopper 20M2 V2A complete with gear motor 7,5 kW, The screw conveyor is activated by the control system of the granulator. Bucket volume approx. 20 m³, HxWxD: 4400x3300x3300mm, weight approx. 27,0 to, Bunker with discharge unit CentriCut 44SR granulator 55 kW, granulator 55 kW (50Hz, 400Volt) and feed screw 55 kW (50Hz, 400Volt) Grinding chamber: rotor knife length 272mm, weight approx. 2.0 to Conveyor belt NT9, belt length 3500mm, useful belt width 416mm, (guide profile height 60mm, driving bar height 60mm, driving bar distance approx. 500mm) total length 3550mm, total width 780mm, total height 2350mm, weight 250kg Sound insulation LxWxH: 2700x2300x2500mm, weight 1,3 to Tunnel detector 600 is integrated into the CentriCut cutting mill on the control side, scanning side 600mm, passage width 840mm, passage height 400mm, weight approx. 150kg The plant is ready for transport and for sale. i.D. Ppsdpsu Nw Ebefx Amket *

Condition: used, Technical details: Ppjdpeu Ng Npofx Amkjt grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: excellent (used), Tool holder from the renowned brand WNT, precision-made, G2.5 balancing up to 25,000 rpm – designed for HSC/HPC machining. Clamping diameter Ø5 mm, length 80 mm. Includes a VHM (solid carbide) end mill. Very good condition. Ppsdsw Rrutepfx Amkot

Condition: excellent (used), Collet chuck from the renowned brand GARANT (Hoffmann Group) – guaranteed top quality and reliability in CNC machining. Model SK40-12-50, catalogue number 300100 12. • SK40 taper – industry standard for machining centres • Clamping diameter Ø12 mm • Chuck length 50 mm • Max. RPM 25,000 • High precision and dynamic balancing • Supplied with a mounted end mill. Very good condition, ready for immediate use. Professional tool for CNC milling machines, ideal for workshops that value quality and reliability. -- PRICE LISTED IS FOR 1 PIECE -- Ppedsw Sy Anjpfx Amkst

Condition: excellent (used), WNT tool holder SK40 Ø8x80, HSC version with G2.5 balancing up to 25,000 rpm. Professional solution for HPC/HSC machining on CNC centers. Complete with a solid carbide end mill VHM (fine-pitch, multi-flute) – ready-to-use set. Very good condition, premium class equipment. Pedpfxsw Rrv Re Amkept

Condition: excellent (used), For sale: Professional tool holder SK40-12×50-K, compliant with DIN 69871 AD/B. Each holder is fitted with a mounted end mill (visible in the photos). Mounting type: SK40 Psdpfx Amoxcg H Hskjpt Sleeve: Ø12 mm Grip length: 50 mm Standard: DIN 69871 AD/B Condition: used, fully functional, ready for operation Please note that several units are available, all in the same Ø12×50 size.

Condition: excellent (used), Professional Ø100 mm x 6 mm disc milling cutter with indexable inserts mounted on an SK40 arbor – Made in Germany. Ideal for fast and precise slotting, cutting, and side machining of steels, cast iron, aluminum, and other structural materials. The cutter is equipped with multi-edge inserts – ensuring high machining performance and long tool life. The set is in good working condition, ready for immediate use on a CNC machining center. • Cutter diameter: Ø100 mm • Cutting width: 6 mm • Indexable inserts • Mount: SK40 taper • Condition: used – 100% functional • Manufacturer: Made in Germany. Podexllclspfx Amkjpt

Condition: excellent (used), Trumpf TruTool C160- 2 Plus electric slitting shear Shears very good condition. Pjdpfxsuhm Rbs Amkept

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Ppsdexdh Hqjpfx Amkjt Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: excellent (used), Year of construction: 2016, 1 x Seydelmann K 126 H AC8 Very low working hours, only 1800 on the clock Ppsdozaffwopfx Amket Year of manufacture: 2016 Videos available on request

Condition: excellent (used), Tipper Tie Alpina mod SW 130-S bowl cutter, With tote bin lift + emptying arm Adjustable speed and bowl speed. 6 knife set up. Stainless steel bowl. Psdex A A Rbspfx Amkspt

Condition: good (used), Kolbus ECK 100 Automatic Corner Cutter Made in Germany, Kolbus GmbH & Co. KG. Very good condition. This is a professional, production-grade device for trimming corners for hardcover binding. Year of manufacture: 2009. Sturdy construction ensures precise operation. Interchangeable blades. Adjustable margins. Ppjdpfx Aey Tu T Ssmkot One set of blades included. Compressed air powered.

Condition: good (used), HPM 92 Paper Cutting Guillotine Machine in very good condition, ready to work. Year of manufacture: 2009. High quality. Technical specifications: Cutting width: 920 mm Stack height: 120 mm Weight: 2500 kg 380V power supply Equipment: – Programming unit with color touchscreen monitor (Mitsubishi Manufactured) – Air table – Enlarged side tables – Photocells Ppjdpfjy Tu Snox Amket – Chrome table surfaces – Spare knife Machine modeled after the German Polar, very solidly built, with Western electronics (Schneider, Mitsubishi, Eaton). Very stable rear frame construction, CNC rail guidance, ball screw drive.

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. Ppsdey Tu Sbopfx Amkjt The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: good (used), Original Heidelberg GT 34×46 Automatic Die Cutter This machine can cut, creas, perforate, and even print (optional). Excellent condition, recently serviced. 100% original, no modifications. Machine format: 34x46cm Pressure: 60t Weight: 600gsm Working speed: 4000 sheets/h Psdpfx Ajy Tu R Romkopt Weight: 2300kg Fully complete, includes frame and spare parts, but no print rollers. A very rare machine on the market.

Condition: excellent (used), Year of construction: 2002, Iberica JRK-105 Automatic Die Cutter Year – 2002 Maximum sheet size: 1050 x 750 mm Minimum sheet size: 400 x 350 mm Cardboard up to 1.5 mm Corrugated board up to 3 mm Clamping capacity: 9-17 mm Maximum speed: 8500 sheets/hour Maximum pressure: 300 t Pedpfxey Uwznj Amkspt Stripping section Separation section Centerline 1 mm plate Micro-adjustment

Condition: good (used), Machine is in good working condition. Repaired 2017. Ppedpfxsy Tm Sts Amkst