Used Double Sheet Control for sale (52,428)

Condition: ready for operation (used), Grinding wheel Ø: approx. 175/190 mm Grinding wheel width: 30 mm Grinding wheel speed: 2800 rpm Ncsdpfx Ajfnbgyjhvep electr. Connection: 380 V, 0.6 kW Space requirement: 670 x 400 x 1140 mm Weight: approx. 120 kg

Condition: used, for sheet thickness up to: 7 mm Ncedpfx Ahjdp U Apevsp blade length: 175 mm Round material up to: 20 mm square material up to: 18 mm space requirement: 1000 x 770 x 690 mm hand-guided

Condition: used, Grinding wheel dimensions: Diameter 175 mm Width 25 mm Bore 51 mm electr. connection: Alternating current 220 V, 420 W kW space requirement: 400 x 400 x 1140 mm weight: 33 kg Nodpfx Ajby Hh Ishvecp

Condition: good (used), height of centers: 220 mm center distance: 1000 mm max. circulation-Ø over bed: 440 mm spindle boring: 52 mm spindle retainer: Gr. 6 mm retainer taper tailstock: 4 MK spindle speed: 37,5 - 3000 Upm forwarding feed: 7500 mm/U Ncedpfxod Scafo Ahvjp thread pitch: electrical connection: 400 V kW space needed: 2800 x 1480 x 1570 mm weight: 2150 kg

Year of construction: 1992, condition: used, machine/vehicle number: 7375, cutting length: 5000 mm disk of circular saw-Ø: je nach Bedarf 420 - 500 mm space needed: 6400 x 1400 x 1700 mm Njdpfxez E Sno Ahvocp weight: ca. 1600 kg

Condition: used, Load capacity: 3 t Opening width: 38 mm Weight: 15 kg Ncsdpfx Asb Nwkxehvjp

Condition: ready for operation (used), machine/vehicle number: 17331, grinding area: 200 x 35 mm electrical connection: 380 V, 0,55 kW space needed: 530 x 400 x 1180 mm Nedped Ixbcjfx Ahvscp weight:

Condition: used, machine/vehicle number: 87/64-369, Grinding wheel dimensions: 400 x 50 mm Grinding wheel speed: 1400 rpm Nsdpfxsb Tqhqo Ahvocp Drive motor: 380 V, 1400 rpm, 2.2 kW Space requirement: 750 x 470 x 470 mm Weight: 138 kg

Year of construction: 1995, condition: used, machine/vehicle number: 30-S/70, circulation-Ø: ueber Bett 625 mm max. center distance: 1500 mm spindle boring: 105 mm spindle speed: 6,6 - 2000 rpm space needed: 4400 x 2050 x 1820 mm weight: 5200 kg Ncedpo Nzhdsfx Ahvsp

Condition: ready for operation (used), Year of construction: 2019, Grinding wheel diameter: 200 mm Grinding wheel width: 32 mm Grinding wheel speed: 2950 rpm Drive motor: 400 V, 0.9 kW Weight approx.: 34 kg Nodpfex E Rw Dsx Ahvecp Required space: 500 x 250 x 1150 mm

Condition: ready for operation (used), Grinding wheel diameter: 300 mm Grinding wheel width: 40 mm Grinding wheel speed: 1400 rpm Nsdpfxsx E Rx Ue Ahvjcp Drive motor: 400 V, approx. 1.5 kW Weight: kg Required space: 700 x 400 x 1100 mm

Condition: ready for operation (used), Year of construction: 2014, Grinding wheel diameter: 200 mm Grinding wheel width: 32 mm Grinding wheel speed: 2950 rpm Drive motor: 400 V, 0.9 kW Weight: 34 kg Required space: 500 x 250 x 1120 mm Ncedpox E Rxhefx Ahvep

Condition: good (used), Grinding wheel diameter: 300 mm Grinding wheel width: 50 mm Grinding wheel speed: 1400 rpm Nsdpfxjv D E Szs Ahvocp Grinding wheel drive: 380 V, 1.5 kW Space required: 1050 x 580 x 1200 mm Weight approx.: 140 kg

Condition: ready for operation (used), Grinding wheel diameter: 250 mm Grinding wheel width: 32 mm Grinding wheel bore: 51 mm Grinding wheel speed: 1450 rpm Grinding wheel drive motor: 1450 rpm Drive power: 0.73 kW Njdpfx Ajxpv Aqshvocp Electrical connection: 380 V, approx. 1.1 kW Required space: 630 x 550 x 1100 mm Weight approx.: 75 kg

Condition: ready for operation (used), Grinding wheel dimensions: 200 x 25 mm Grinding wheel mounting hole: 51 mm Njdpfof Aru Dox Ahvecp Grinding wheel speed: 2900 rpm Grinding wheel drive: 380 V, 0.7 kW

Condition: good (used), functionality: fully functional, cutting length (max.): 600 mm, pivoting range: 20,135 °, For sale: 1 used double mitre saw Manufacturer: Hebö Maschinenfabrik Model: unknown Year of manufacture: unknown Saw blade diameter: 500 mm Processing length: up to 600 cm Mitre angle: 20 - 135 degrees Njdpfx Ahsxrag Eevjcp Control system: see picture The machine can be inspected at our warehouse in 09599 Freiberg.

Year of construction: 2013, condition: excellent (used), Comes for sale: 1 piece used H crane traverse Ncsdjit T N Aspfx Ahvep Manufacturer: SMV Scheunemann type: 13-0163 SHTS60 BJ: 2013 Own weight: 4.105Kg Combined 60t and 28t load lifting points dimensions L x W x H: 5.900 x 2.700 x 1.200mm Can be inspected in our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition Nsdpfx Ajx Sr Evohvocp and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. Ncedpfoxq R Hajx Ahvep The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Ncedpfx Ahoxq Hkuevsp Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm Ncjdpoxuv Udefx Ahvep In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life Ncjdpfx Ahexz Dqmevop • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Double bench grinder Ncodpfx Asywbatohvep

Condition: used, machine/vehicle number: 005980, Squaring: First and Second Pass Max Panel Thickness: 120 mm Max feed speed: 20 m/min Ncsdoxcf S Ijpfx Ahvsp Distance between dogs: 1000 mm

Condition: used, machine/vehicle number: 006064, Squaring: First and Second Pass Max Panel Thickness: 85 mm Max feed speed: 26 m/min Nedolw A D Tepfx Ahvocp Distance between dogs: 1000 mm