Used Double End for sale (15,922)

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,895 h, load capacity: 2,000 kg, lifting height: 2,024 mm, fuel type: electric, mast type: telescopic, construction height: 1,540 mm, fork length: 1,150 mm, drive type: Elektro, Double-deck forklift Load center: 600 Mast type: Telescopic Bdodpezpb Rajfx Amyof Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery Ah: 375Ah Battery manufacturer: Still Battery type: PzS Battery year of manufacture: 2020 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 tested. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable conditions are available upon request. We will be happy to provide you with competent and detailed advice on our vehicles. Initial lift, non-marking tires, double-deck loading.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,780 h, load capacity: 2,000 kg, lifting height: 2,024 mm, fuel type: electric, mast type: telescopic, construction height: 1,540 mm, fork length: 1,150 mm, drive type: Elektro, Double-deck forklift Bdsdpfx Ajzpb N Nemyof Load center: 600 Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: Still Battery type: PzS Battery year of manufacture: 2020 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment has been inspected by our workshop and in accordance with FEM4.004. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used forklifts, even if you do not purchase a vehicle from us. Lease purchase and financing options are available upon request at favorable terms. We will gladly provide you with comprehensive and expert advice on our vehicles. Initial lift, non-marking tires, double-deck loading.

Condition: used, Craven Double-Column Vertical Boring & Turning Mill (VTL) Table Diameter: 9 ft / 2,743 mm Maximum Swing: 9 ft 6 in / 2,895 mm Maximum Machining Height: 6 ft 6 in / 2,000 mm (Table top to underside of crossrail) Bedjzq Dc Uepfx Amysdf Maximum Workpiece Weight: Up to 15,000 kg (Approx. 15 Tons) Table Speed Range: 1 to 50 RPM Ram Travel (Vertical Z-Axis): Up to 1,000 mm

Condition: used, mileage: 15 km, power: 107 kW (145.48 HP), first registration: 06/2024, fuel type: diesel, wheelbase: 43,320 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 7, loading space length: 3,170 mm, loading space width: 2,040 mm, loading space height: 400 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, traction control, trailer coupling, = Additional options and equipment = - Passenger bench seat - Third brake light - Front electric windows - Spare wheel - Driver airbag - Remote central locking - Tailgate - Height-adjustable steering wheel - Radio - Adjustable driver's seat - Partition wall with window = Notes = Bjdpfxjyyvlcs Amyjdf Double cab Open loading area L 317 x W 204 x H 40 cm (partition wall height) Air conditioning Cruise control Passenger bench seat Tow bar = Further information = Cab type: double Number of cylinders: 4 Engine displacement: 2,299 cc Unladen weight: 2,364 kg Gross vehicle weight: 2,364 kg Interior: grey Registration number: V-96-PHH Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW Bsdpfxsg Db U Ao Amysdf feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, – Italian manufacture Bsdpfx Amsw H R R Hsyodf TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Year of construction: 1991, condition: excellent (used), A. COSTA PUMA 2/60 double-shaft multisaw - Italian production - year of production 1991 TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 45 and 45 kW engines 3 kW feed motor 1.1 kW height adjustment motor disc diameter max. 300 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm track width 350 mm total power of 94 kW feed control on the inverter automatic central lubrication minimum length of the element 600 mm electric height adjustment electric shaft height adjustment Bdedpfx Amjh Izpcjyof four upper pressure rollers pneumatic clamps five anti-ejection pawls shaft position indicator stub diameter 2 x 220 mm spindle speed 4500 RPM dimensions of the machine (length / width / height) 240/235/210 cm weight ~ 6000 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing. Bdsdpoq Ii Dlefx Amyof

Condition: used, functionality: fully functional, Year of construction: 2015, - Made in Poland - Year of manufacture: 2015 - DTR, CE Bodpfsw H Rdaox Amyodf - Electric saw blade spacing adjustment TECHNICAL SPECIFICATIONS: - Cutting height: 60 mm - Saw blade diameter: 250 - 350 mm - Number of saw blades: 2 pcs - Max. cutting width: 700 mm - Min. cutting width: 90 mm - Max. blade spacing: 460 mm - Feed speed adjustable via inverter - Feed speed range: 0 - 40 m/min - Main motor power: 2 x 4.7 kW - Feed motor power: 0.75 kW - Blade spacing motor power: 0.12 kW - Total power requirement: 11.5 kW - Roller table length: 2 x 240 cm - Roller table width: 460 mm - Extraction port diameter: 160 mm - Transport dimensions (L/W/H): 200 / 200 / 140 cm - Weight ~ 1000 kg

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, planing width: 610 mm, number of blades: 4, extraction connection diameter: 150 mm, number of planer blades: 4, planing height: 190 mm, – German-made – For wet wood TECHNICAL SPECIFICATIONS: – Planing width: 610 mm – Planing height: 190 mm – Motor power: 2 x 5.5 kW – 4-knife cutterheads – Four feed speeds: 6 / 9 / 12 / 18 m/min – Two upper toothed feed rollers – One upper smooth feed roller – Two support rollers in the table – Row of anti-kickback fingers – Extraction port diameter: 150 mm Bdedpfx Amoxykn Ajyef – Machine dimensions (L/W/H): 160 / 140 / 170 cm – Weight: 1500 kg

Condition: used, TECHNICAL SPECIFICATIONS: Bdedeymd I Depfx Amyjf – Length of feed rollers: 7800 mm – Roller width: 1430 mm – Roller diameter: 110 mm – Destacking system – Stacker width: 1540 mm – Package depth: 1430 mm – Package height: 1830 mm – Element collection with chains: 1600 mm x 1600 mm – Return of crossbars via belt conveyor: 3000 mm – Crossbar stacking up to 1370 mm at lifting height 1700 mm – Total length: 12 m

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 242724, Automatic miter cutting Overlength cutting Saw blades 500mm etc. Bdsdpfozqu Egjx Amysf

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Bdedpfx Amszcdz Aoysf Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: used, mileage: 179,000 km, power: 85 kW (115.57 HP), first registration: 12/2019, fuel type: diesel, maximum load weight: 800 kg, overall weight: 3,500 kg, axle configuration: 4x2, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 3,150 mm, loading space width: 2,100 mm, Year of construction: 2019, -Used Truck: Iveco Daily 35C12 Double Cab. 7 seats - Tipper truck, 3 meters - Year: December 2019, Engine: 2,300 TD 115 hp Euro 6, 6-speed manual transmission, Mileage: 179,200 km. -35 Quintals (3.5 tons) gross vehicle weight, Payload: 8 Quintals (0.8 tons), Twin tires. -Equipment: Rear tipper body, External dimensions: 3,150 x 2,100 mm, -Iron sideboards, 400 mm high, -Equipped with: Manual air conditioning, Radio-Bluetooth, Electric windows, Central locking, Airbags, Two keys, Spare wheel. -Body in good condition, Interior is intact and well-maintained. -Valid inspection until December 2025. New front and rear tires. -New engine turbocharger, service already performed. -Immobilizer anti-theft system is not working. -Single owner vehicle. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales Representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como) Lombardy Opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM Saturday: 8:30 AM / 12:00 PM - 2:00 PM / 5:00 PM - Certified Mileage. - Test drive possible by appointment. - Transfer of ownership can be arranged on-site. - Customized financing options available. Carlo Mauri Srl declines all responsibility for any unintentional inconsistencies in the advertisement, which does not represent any contractual obligation. The prices shown are exclusive of VAT and transfer of ownership fees. Bdedpoyy Nk Ssfx Amyof

Condition: used, Year of construction: 2003, functionality: fully functional, total width: 360 mm, total length: 820 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Bsdpfxjxwp A Ho Amysdf Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: excellent (used), Max. external diameter: 75 mm Hydraulic pressure: 102 bar Safety pressure: 120 bar Tank capacity: 76 L CE standards Dimensions: 2200 × 830 × 1350 mm Bjdow U Awajpfx Amyjdf Weight: 1300 kg

Condition: new, power: 177 kW (240.65 HP), fuel type: diesel, color: grey, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, second-hand vehicle warranty, traction control, trailer coupling, truck registration, USB port, diesel particulate filter, spare wheel in roadworthy condition, rear parking pilot system, KeyFree system, tire pressure monitoring system, drive type: all-wheel drive, driver-side knee airbag, heated windshield, digital radio reception (DAB), automatic transmission - type: 10R80, Ford navigation system with AppLink, windshield wipers with rain sensor, alloy wheels, rear mud flaps, driver's seat, front left, electrically adjustable (8-way), front seat heating, intelligent adaptive cruise control, interior filter: dust and pollen filter, driving assistance system: rear view assistant (emergency braking assistant), low emissions according to Euro 6e emission standard, front cup holders, instrument cluster with 8-inch digital display, luggage/cargo compartment management system, rear seat bench (3rd row), three-seater bench, foldable, rear LED lights, LED headlights, headlight assistant with day/night sensor, rear bumper with step, rocker panel protection strips, on-board modem, driving assistance system: collision mitigation system, ambient lighting exterior 360°, exterior door handles in contrasting color, exterior mirrors electrically foldable, FordPass Connect including eCall, heated steering wheel, central locking with remote control, Bang & Olufsen Play sound system, cargo area liner, trailer hitch, anti-lock braking system (ABS), front side airbags, exterior mirrors electrically adjustable and heated, front and rear parking pilot system, passenger-side knee airbag, rear view camera with split view, Apple CarPlay and Android Auto, double locking central locking, intelligent speed limiter, airbag driver/passenger side, electric front windows with comfort operation, omission of roll bar, metallic paint, hardtop with side windows (cargo area), distance control (Distance Alert, DA), audio controls on the steering wheel, audio package 89, forward collision warning system, exterior mirrors in vehicle color, passenger airbag can be deactivated, passenger seat adjustable (4-way), turn signal integrated in exterior mirror, puddle light in exterior mirror, brakes ... Changes, prior sale and errors excepted. Bjdezqi Rkopfx Amyodf

Condition: excellent (used), Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Bedpfx Amjxqgf Ejysdf

Condition: used, Year of construction: 2008, Pressure total: 100 ton Daylight: 1.400 mm Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Bdedpfx Aoznn Upemysf Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Weight of machine approx.: 10 ton

Condition: good (used), functionality: fully functional, motorized notching machine, 4 stations, drive power 2.2 kW Bdjdpfozqgztsx Amyof

Condition: good (used), Year of construction: 1990, Unit with side support table External dimensions of drilling machine: Height: 1700 mm Width: 700 mm Depth: 1500 mm Weight: approx. 320 kg External dimensions of the side table: Bedpfozqfv Nsx Amysdf Height: 1100 mm Width: 2600 mm Depth: 1410 mm Condition: good, second-hand

Year of construction: 2012, condition: used, Elumatec AF 222 End Milling Machine, the Machine Transoms & Door Profiles in Aluminium or Plastic, Cutting Range up to 400mm, Tool Diameter up to 280mm. S/No. 2220025315 (2012). Country of Origin: Germany Bdodozqdw Espfx Amyof Location: These lots are located in Burton-on-Trent, UK. Please see individual lot for loading information and charges.

Condition: new, Year of construction: 2026, machine/vehicle number: K00627, functionality: fully functional, operating hours: 2 h, power: 1.8 kW (2.45 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 240 mm, cutting width (max.): 450 mm, control type: manual, pivoting range: 45,060 °, actuation type: manual, total height: 1,300 mm, total length: 2,000 mm, total width: 850 mm, Equipment: CE marking, documentation/manual, The S 320 DG from Sägemaschinenfabrik Bauer GmbH is a powerful double-miter band saw designed for demanding applications in metal construction, mechanical engineering, steel construction, as well as in locksmith shops and manufacturing companies. Thanks to its robust industrial design, high cutting accuracy, and well-thought-out construction, it is ideally suited for economical and precise cutting operations in daily continuous use. Bdodpjzqdmmefx Amyof With a generous cutting capacity of Ø 320 mm for round stock or 450 x 230 mm at 90°, the S 320 DG offers high flexibility for a wide range of workpieces and material cross-sections. Miter cuts from 45° to the left to 60° to the right enable versatile applications in the cutting of profiles, pipes, and solid materials.

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Bedpfx Ajxdi Agemyodf

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, cutting length (max.): 4 mm, saw blade diameter: 350 mm, rotational speed (max.): 3,000 rpm, overall weight: 600 kg, power: 4.4 kW (5.98 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle speed: approx. 3,000 rpm Cutting length: approx. 3–4 m Saw blade diameter: approx. 350 mm (300–400 mm) Saw angle: 90° and 45° MACHINE DETAILS Suitable materials: aluminum and PVC profiles Compressed air requirement: 6–8 bar Motor power per head: approx. 1.5–2.2 kW Connection voltage: 400 V Weight: approx. 500–600 kg Bodozqblaepfx Amyedf EQUIPMENT Pneumatic horizontal clamping devices