Used Doosan 310 for sale (314)

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914013, fuel type: diesel, motor manufacturer: Doosan DP180LA, General information Field of application: Construction Weights Empty weight: 4.800 kg Lodjw Srarepfx Ad Njrg Functional Generator capacity: 630 kVA CE mark: yes Other information Fuel consumption: 94.2 Liter / Hour at 75% Load Generator: Leroy Somer TALA473E Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,35x1,8x2,35 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch 2 similar units in stock

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Lodpfx Aou Sfncjd Nsrg Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1300 mm Y-AXIS TRAVEL: 670 mm Ljdew Dkfljpfx Ad Njrg Z-AXIS TRAVEL: 625 mm DISTANCE SPINDLE NOSE-TABLE: 150-775 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 12000 rpm; 11-18,5 kW; 117,8 Nm; ISO 40 - DIN TABLE SIZE: 1500 x 670 mm MAX ADMITTED LOAD: 1300 Kg TOOL MAGAZINE: BASKET-TYPE ; 30 POS MAX TOOL DIAMETER: 76 (125) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC i Series Plus WEIGHT: 8500 Kg OVERALL DIMENSIONS: 2600 x 3350 x 3120 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PCMCIA SERIAL PORT ; USB PORT ; PORTABLE HANDWHEEL NOTE: 4TH-AXIS PRE-SET

Condition: used, machine/vehicle number: 16786, Year of construction: 2021, operating hours: 1,918 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, construction height: 2,200 mm, fork length: 1,200 mm, overall weight: 4,800 kg, enginetype: Electric, manufacturer: Doosan Lrodpfex Rk Elox Ad Neg

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Swing over saddle 817 mm, Maximum turning diameter 550mm, maximum turning length 3070mm, bar capacity 116.5mm, Y axis +/- 75mm, Ledox I N Rbjpfx Ad Nsrg Spindle speed 2000rpm, milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Fanuc IPlus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: used, Year of construction: 2011, operating hours: 6,682 h, 2011 | Doosan DX300LC | Used Tracked Excavator | 6682 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 52500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 62 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good general condition of the excavator for its age. Ljdpfox I Nngjx Ad Norg 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39626 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2017, operating hours: 14,421 h, Type of fuel: Diesel Empty weight: 12.860 kg Dimensions (LxBxH): 405 x 223 x 395 cm Lrodpfx Aox Iqcxed Njg Lifting capacity: 9.000 kg Lift height: 510 cm Fork dimensions: 2.440 x 2.200 mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: FDB0X-2520-00135 - Operating hours: 14421 - Lifting capacity: 9000kg - Lifting height: 5100mm - Overhead clearance: 3920mm - Free lift: 0mm - Fork length: 2440mm - Maximum fork width: 2200mm - Minimum fork width: 570mm - Number of wheels: 6 Wheels - Attachment: Side-shift, Fork positioner - Options: Work lights, Heating, Full cabin, Radio, Camera - Mast: Duplex - Drive: Diesel - Motor brand: Doosan - Transport dimensions: 4050mm x 2230mm x 3950mm (l x w x h) - Transport weight [kg]: 12860kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), Year of construction: 2015, Model Year: 2015 Width: 560 Lsdpfxjx N Txfo Ad Nsrg Length: 430 Height: 570 Number of Axes: 3 Holder: BT40 Spindle Speed (RPM): 10,000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: good (used), CNC lathe with short bar loader and NC tailstock! Available immediately! Year of manufacture 2011 – first commissioning 2015; Low operating hours, Fanuc control with Manual Guide i; 250 mm chuck, 65 mm spindle bore, turning length approx. 750 mm; Box guideways in X and Z; Chip conveyor; Tool setter; LNS short bar loader; Parts catcher with belt; Various tool holders, fixed and driven; Fully equipped for turning; Ledpfx Aex N S D Tjd Nerg

Condition: used, Year of construction: 2017, operating hours: 6,150 h, Year of manufacture: 2017 Empty weight: 23.500 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Lrsdettzmnjpfx Ad Nog Digging depth: 10.795 m

Condition: used, power: 41 kW (55.74 HP), color: orange, Year of construction: 2010, operating hours: 4,810 h, Year of manufacture: 2010 Drive: Wheel Empty weight: 5.550 kg Lodpfx Adow Afrdj Njrg Dimensions (LxBxH): 612 x 229 x 286 cm

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 5,580 h, Year of manufacture: 2014 Ljdpfx Asxqfciod Nsrg Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, Year of construction: 2020, DOOSAN LYNX 2100LYA Year: 2020 FANUC touch control Specification: Max spindle speed: 6000 rpm Lrodox Id D Aspfx Ad Nog Max turning length: 510 mm Max bar diameter: 51 mm Max turning diameter: 300 mm Y-axis: 105 (±52.5) C-axis: 360° Turret: BMT45P 24 positions - Programmable tailstock - Tool probe - LNS chip conveyor - Driven tool holders: 4 pcs (2/2) - Standard tool holders: 6 pcs Operating hours: 3177 hours

Condition: good (used), Year of construction: 2014, spindle speed (min.): 2,500 rpm, Year of manufacture: 2014 Lrodpfx Adjx N A Ebs Nsg Chuck diameter: 10" Number of axes: 3 Swing over bed: 250 mm Spindle speed (rpm): 2500 Machinable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Derlin, Peek

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,110 h, Year of manufacture: 2019 Lrsdpexqfb Ejfx Ad Nsg Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m

Condition: used, Year of construction: 2017, operating hours: 7,830 h, Year of manufacture: 2017 Lrsdpsx Hgtwjfx Ad Njg

Condition: used, fuel type: electric, lifting height: 4,800 mm, Year of construction: 2014, operating hours: 6,240 h, Year of manufacture: 2014 Ledpsx Hgrajfx Ad Norg Empty weight: 23.500 kg Carrying capacity: 1.800 kg GVW: 25.300 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 6,640 h, Year of manufacture: 2015 Empty weight: 14.400 kg Lodex Hgqiopfx Ad Njrg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: good (used), Year of construction: 2005, spindle speed (min.): 3,000 rpm, travel distance Z-axis: 450 mm, Model Year: 2005 Chuck Diameter: 12" Number of Axes: 2 Length: 450 mm Spindle Bore Diameter: 350 mm Lredpfx Adjx Nvtfj Nsg Spindle Speed (RPM): 3000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: ready for operation (used), Year of construction: 2013, operating hours: 15,000 h, Main Drive Spindle speed range 12000 Tool taper Capto C6 Number of axis 5 Movement Y-Axis Movement 230 mm A-Axis Movement 1550 mm Lrodpfx Adox E Eame Nsg Workpiece Workpiece drm over bed 1000 mm This 5-axis DOOSAN Puma MX2600ST turn-mill centre was manufactured in 2013. It features a maximum turning diameter of Ø 760 mm, part length up to 1540 mm, and bar capacity of Ø 76 mm. Equipped with a Fanuc 31i-A control, dual spindles with speeds up to 4000 rpm, and a milling spindle at 12,000 rpm. Includes a tool magazine with 80 positions and a swarf conveyor. Consider the opportunity to buy this DOOSAN Puma MX2600ST turn-mill centre. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2016, operating hours: 300 h, Control Unit Brand FANUC Model iSeries Table Table load 400 kg Main Drive Number of axis 4 Spindle Speed 10000 RPM Tool taper BT 40 Movement X-Axis Movement 800 mm Z-Axis Movement 500 mm Y-Axis Movement 500 mm Lredpfox E Egaox Ad Nog This 4-axis DOOSAN DNM 4500 was manufactured in 2016. It features X/Y/Z travel of 800 x 500 x 500 mm, a table size of 1000 x 500 mm, and a maximum table load of 400 kg. The spindle operates at 10,000 RPM with a BT40/CAT40 taper, complemented by a 24-position ATC. Rapid traverse rates are 30 m/min for X/Y and 18 m/min for Z. Includes a coolant system and full safety enclosure. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 4,000 rpm, travel distance Z-axis: 500 mm, throat depth: 300 mm, Model Year: 2007 Chuck Diameter: 8" Number of Axes: 2 Length: 500 Swing Over Bed: 300 mm Spindle Speed (Rpm): 4000 Lsdjx Npbiepfx Ad Nsrg Machinable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 2004, spindle speed (max.): 4,000 rpm, travel distance Z-axis: 500 mm, throat depth: 300 mm, Year of Manufacture: 2004 Chuck Diameter: 8" and 6" Number of Axes: 4 Length: 500 mm Spindle Bore Diameter: 300 mm Lrjdpsx Npa Sefx Ad Nsg Spindle Speed (rpm): 4000 Machinable Materials: Steel, Aluminium, Titanium, Graphite, Copper, Invar, Composite, Derlin, Peek

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller manufacturer: FANUC, controller model: Series 0i-MC, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, BRAND: DOOSAN-DAEWOO MODEL: MYNX NM-510 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 2006 CNC CONTROL: FANUC Series 0i-MC MACHINE WEIGHT: 7,500 kg MACHINE DIMENSIONS: - Length: 4,165 mm - Width: 2,600 mm - Height: 3,043 mm Spindle Spindle taper: ISO 40 Spindle speed: 12,000 rpm Spindle motor power (cont./30 min): 15 / 18.5 kW Working Capacity X axis: 1,020 mm Y axis: 510 mm Ljdpfxsxxlmwj Ad Norg Z axis: 625 mm Distance spindle nose – table surface: 150 – 775 mm Distance spindle center – column: 557 mm Table Table dimensions: 1,200 x 500 mm Table load capacity: 800 kg Feed Rates Rapid traverse (X/Y/Z axes): 36,000 / 36,000 / 32,000 mm/min Cutting feed rate (X/Y/Z axes, linear interpolation, max): 8,000 mm/min Tool Changer Tool holder taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Maximum tool diameter (adjacent tools full/empty): Ø 90 / Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Coolant tray + high pressure pump (15 bar) with through-spindle coolant Chip conveyor Spindle line air conditioner + transformer Manuals, electrical diagrams, and CE Declaration

Condition: like new (used), Year of construction: 2014, DOOSAN LYNX 220 LATHE YEAR 2014 TECHNICAL DETAILS Working area Maximum turning diameter: 320 mm Maximum spindle travel: 510 mm Maximum turned length: 305 mm Bar passage: 51 mm Motor power: 11 kW Control: Fanuc i-Series Number of tool positions: 12 MACHINE DETAILS Machine weight: 3,500 kg Lsdew Ht I Iepfx Ad Nerg