Used Dirty Water Pump for sale (13,896)

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Grundfos motor 0.55 kW -Flow volume: 3m³/h -Container with level indicator and magnetic switch -Dimensions total: 550/530/H600 mm Kodpowupr Sofx Abnodr -Weight: 43.4 kg

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Ksdpfjzizkyjx Abnodr Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Year of construction: 2023, condition: like new (used), functionality: fully functional, EDUR CBL 80-200/211 centrifugal process pump, 111 m³/h, 28.8 kW, stainless steel, 2023 Description For sale: an industrial process pump, EDUR CBL 80-200/211, from the renowned German manufacturer EDUR Pumpenfabrik. The pump was manufactured in 2023 and is in perfect technical condition, ready for immediate use and requires no additional investment. The unit is made of AISI 304L stainless steel and equipped with an energy-efficient Lammers IE3 Premium Efficiency motor. The pump is mounted on a steel frame. It is ideally suited for use in the food, chemical, and oil industries, as well as in technological installations. Technical data * Manufacturer: EDUR * Model: CBL 80-200/211 * Year of manufacture: 2023 * Condition: used, fully functional Kedpey Amr Sofx Abnsdr * Type: centrifugal process pump * Capacity: 111 m³/h * Head: 56.1 m * Motor power: 28.8 kW * Motor: Lammers IE3 Premium Efficiency * Voltage: 400/690 V * Frequency: 50 Hz * Rotational speed: 2900 rpm * Maximum operating pressure: 10 bar * Maximum medium temperature: 60°C * Material: AISI 304L stainless steel * Motor protection class: IP55 * Weight: 308 kg * Available immediately Application The pump is designed for the transport of: * vegetable oils, * animal fats, * biodiesel (FAME, UCOME), * fatty acids (FFA), * food liquids, * chemical liquids, * process media, * technological water. Additional information * Location: Warsaw, Poland * Loading possible on-site. * Domestic and international transport can be arranged. * Additional photos, a nameplate, and technical documentation are available upon request. EDUR CBL 80-200/211 process pump | 111 m³/h | 56.1 m | 28.8 kW | AISI 304L | Year 2023

Condition: used, functionality: limited functionality, Great deals, top prices – please inquire. I am offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Pump 1 Flow 7XD -60, 7856 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Pump 2 Flow 7XD -60, 25179 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Kjdpfezivhtox Abnodr Pump 3 Flow 20XR, 48000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pump 4 Flow 20XR, 55000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling The pumps are from a single original owner and are in good condition. Pump 1 + Pump 2 are already ready for shipping and have been tested. Pump 3 + Pump 4 are also available at a special price as a unit or for self-installation. Both pressure intensifiers per pump have been completely overhauled. Prices available upon request.

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water Kdedpfx Abjydv I Denjr • Price quoted per unit.

Condition: used, functionality: unexamined, KSB Industrial Centrifugal Pump Heavy-duty industrial centrifugal pump, complete with a high-efficiency Siemens IE3 electric motor, mounted on a steel base frame. The unit has been professionally dismantled from an industrial production facility and is available immediately from our warehouse in Rotterdam, The Netherlands. Suitable for water, cooling water, and a wide range of industrial process applications. Kdsdpfszltmlex Abnjr Technical Specifications -Pump Manufacturer: KSB -Pump Type: Industrial Centrifugal Pump -Motor Manufacturer: Siemens -Motor Efficiency: IE3 Premium Efficiency -Motor Power: 55 kW -Voltage: 400 / 690 V -Frequency: 50 / 60 Hz -Speed: 1482 rpm (50 Hz) -Protection Class: IP55 -Mounting: Steel base frame -Condition: Used -Location: Rotterdam, The Netherlands SURPLUS – Industrial Solutions From Surplus to a Second Life

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Kdodpfx Asy D Rk Iebner Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Year of construction: 2018, operating hours: 10 h, condition: good (used), functionality: fully functional, Subject: RZ125-315 pump with diffuser, impeller for water with blades - Pump operating parameters: Q = 80-150 m³/h H = 14.7-12.5 m - Material: cast iron, grade ŻL250 - Sealing: rope seal - With 3SIE160L-6 motor, 11 kW, 960 rpm, 400V Kdedpfx Aboztxvnonjr 2. Quantity: 2 pcs.

Year of construction: 2021, condition: used, machine/vehicle number: 117500730004, Temperature control unit from the manufacturer Regloplas, used and untested. The unit is designed for applications in tool temperature control, injection molding, and industrial process engineering. It operates in a two-circuit system with the RT100 control system. Pressurized water is used as the medium, and the maximum supply temperature is 160 °C. The heating capacity is 18 kW, and the pump capacity is 2 x 60 l/min and 6.0 bar. The unit is equipped with two pumps (CY-4281.0823). The year of manufacture is 2021, and the total weight is 230 kg. Kdedpfx Aey Suhyjbnjr

Year of construction: 2021, condition: used, machine/vehicle number: 117500730003, Temperature control unit from the manufacturer Regloplas, used and in untested condition. The unit is designed for applications in tool temperature control, injection molding, and industrial process technology. It operates in a two-circuit system with the RT100 control system. Pressurized water is used as the medium, and the maximum supply temperature is 160 °C. The heating capacity is 18 kW, and the pump performance is 2 x 60 l/min & 6.0 bar. The unit is equipped with two magnetic coupling pumps (Speck CY-4281). The year of manufacture is 2021, and the total weight is 230 kg. Kodpfx Aey Suikobnodr

Condition: ready for operation (used), * Brand: HEPU * Model: freshwater pump Kdsdpfxsywmlze Abnsr * Driving: 22 kW E-motor

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Kdedjzmap Nspfx Abnsr Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 450 mm, travel distance Z-axis: 450 mm, total height: 3,000 mm, overall weight: 22,000 kg, spindle speed (max.): 16,000 rpm, tool weight: 8,000 g, This 3-axis SAMAG MFZ 2-2 was manufactured in 2007, featuring a line voltage of 400V, frequency of 50 Hz, and a control voltage of DC 24 V. With a power consumption of 72kW and a weight of 700kg, it includes optional 3D data of the clamping tower. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information about this machine. • Tool storage • Type: Decagon • Number of storage locations: 100 (2x50) • Number of cassettes: 10 • Cassette locations: 10 • Cassette pitch: 90 mm • Max. cassette magazine speed: 8.3 min • Delay time from max. cassette magazine speed to standstill: 300 ms • Max. tool load mass: 280 kg • Max. tool weight/plastic collet: 6 kg • Max. tool weight/steel collet: 8 kg • Max. tool diameter with free adjacent locations: 160 mm • Rotation axis: 10x36 • Time to change from nearest cassette (left/right): 1.5 s • Tool change on spindle, average chip-to-chip (VDI 2852), without wheel rotation: 4.5 s • Axes and travel paths • Travel paths • Y-axis (vertical) working stroke: 500 mm • Y-axis (vertical) total stroke incl. tool change: 775 mm • Axis acceleration X/Y: 0.6 xg / 0.8 xg • Main spindle drive • Spindle unit: GMN high-frequency spindle HCS 220-16000/28 • Spindle spacing: 450 mm • Sleeve diameter: 220 mm • Weight: 110 kg • Drive motor: 1FE1 083-4WN11-1BA2 • Torque (S1): 65 Nm • Torque (S2): 74 Nm • Workpiece carrier unit • W-axis swivel unit • Swivel time 180°: 4.5 s • Faceplate/counterbearing diameter: 500/345 mm • Drive/counterbearing speed (max.): 15/20 min • Mass moment of inertia: 140 kgm² • Permissible tilting moment: 8,000 Nm • Permissible tangential moment of drive/counterbearing: 10,000/5,000 Nm • Locking force of Hirth gearing at 100 bar/counterbearing: 190/175 kN • Workpiece holder A1/A2 axis • Parting angle: 3 • Swivel time 180°: 3.5 s • Faceplate/counterbearing diameter: 345 mm • Speed (max.): 20 min Kdsdpfx Abezvvnmensr • Mass moment of inertia: 20 kgm • Permissible tilting moment: 3,000 Nm • Permissible tangential torque drive/counterbearing: 5,000 Nm • Line voltage: 400 V • Frequency: 50 Hz • Control voltage: DC 24 V Additional equipment • Cooling lubricant system (scraper belt conveyor) • Dimensions (L x W x H): 2885 x 1095 x 1830 mm • Discharge height: 1020 mm • Gap screen: 500 μm • Filling volume: 100 l • Wastewater pump: 380 l/min at 1.6 bar • Central cooling unit • Type: DK 160-V/SO • Cooling capacity: 1900 W • Min./Max. ambient temperature: 10/40 °C • Max. water outlet temperature: 20 °C • Condensation temperature: 40 °C • Refrigerant: R134a, 2 kg • Connected electrical power: 5.1 kW • Clean water tank (empty): 930 kg • Chip conveyor (empty): 450 kg Dimensions Machine Depth 5500 mm

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 450 mm, travel distance Z-axis: 450 mm, total height: 3,000 mm, overall weight: 22,000 kg, spindle speed (max.): 16,000 rpm, tool weight: 8,000 g, This SAMAG MFZ 2-2 was manufactured in 2006. A robust horizontal machining centre, it features a power rating of 72 kW and operates on a 400V mains voltage with a 50 Hz frequency. Weighing 700 kg, it includes optional 3D data for clamping towers and spare parts. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information. • Tool storage • Type: Decagon • Number of storage locations: 100 (2x50) • Number of cassettes: 10 • Cassette locations: 10 • Cassette pitch: 90 mm • Max. cassette magazine speed: 8.3 min • Delay time from max. cassette magazine speed to standstill: 300 ms • Max. tool load mass: 280 kg • Max. tool weight (plastic collet): 6 kg • Max. tool weight (steel collet): 8 kg • Max. tool diameter with free adjacent locations: 160 mm • Rotation axis: 10x36 • Time to change from the nearest cassette (left/right): 1.5 s • Tool change on the spindle (avg. chip-to-chip without wheel rotation, VDI 2852): 4.5 s • Axes and travel paths • Travel paths: Y (vertical) working stroke 500 mm; Y (vertical) total stroke incl. tool change 775 mm • Axis acceleration (X/Y): 0.6 xg, 0.8 xg • Main spindle drive • Spindle unit: GMN high-frequency spindle HCS 220-16000/28 • Spindle spacing: 450 mm • Sleeve diameter: 220 mm • Spindle unit weight: 110 kg • Drive motor: 1FE1 083-4WN11-1BA2 • Torque (S1): 65 Nm • Torque (S2): 74 Nm • Workpiece carrier unit (W-axis swivel unit) • Swivel time 180°: 4.5 s • Faceplate/counterbearing diameter: 500/345 mm • Drive/counterbearing speed (max.): 15/20 min • Mass moment of inertia: 140 kgm² • Permissible tilting moment: 8000 Nm • Permissible tangential moment (drive/counterbearing): 10,000/5,000 Nm • Locking force of Hirth gearing at 100 bar (drive/counterbearing): 190/175 kN • Workpiece holder A1/A2 axis Ksdpfezvvntjx Abnedr • Parting angle: 3 • Swivel time 180°: 3.5 s • Faceplate/counterbearing diameter: 345 mm • Speed (max.): 20 min • Mass moment of inertia: 20 kgm • Permissible tilting moment: 3,000 Nm • Permissible tangential torque (drive/counterbearing): 5,000 Nm • Mains voltage: 400 V • Frequency: 50 Hz • Control voltage: DC 24 V • Power rating: 72 kW Additional equipment • Cooling lubricant system (chip management) • Type: Scraper belt conveyor • Dimensions (L x W x H): 2885 x 1095 x 1830 mm • Discharge height: 1020 mm • Gap screen: 500 μm • Filling volume: 100 l • Wastewater pump: 380 l/min at 1.6 bar • Central cooling unit • Type: DK 160-V/SO • Cooling capacity: 1900 W • Min./Max. ambient temperature: 10/40 °C • Max. water outlet temperature: 20 °C • Condensation temperature: 40 °C • Refrigerant: R134a, 2 kg • Connected electrical power: 5.1 kW • Peripheral masses • Mass of clean water tank (empty): 930 kg • Mass of chip conveyor (empty): 450 kg • One slaughter machine (optional) • 3D data/CAD of the clamping tower (possibility for 3 clampings) (optional) • 2 replacement towers and spare parts package (optional) Dimensions Machine Depth 5500 mm

Condition: good (used), functionality: fully functional, Item: LC-100826-FristamFPE FRISTAM FPE STAINLESS STEEL CENTRIFUGAL PUMPS Manufacturer: Fristam Pumpen, Germany Pump type: Hygienic centrifugal pumps Series: FPE Material: Stainless steel Condition: Used We offer 3 Fristam FPE stainless steel centrifugal pumps, suitable for hygienic applications in the food, dairy, beverage, and processing industries. Available pumps 1. Fristam FPE 3532 A Type: FPE 3532 A Serial No.: 0438460197 Stainless steel pump housing Hygienic connections 2. Fristam FPE 2552/250A Type: FPE 2552/250A Serial No.: 0458460117 Ksdpszuzc Hefx Abnodr Stainless steel pump housing Hygienic connections 3. Fristam FPE 752/250A Type: FPE 752/250A Serial No.: 0482460083 Stainless steel pump housing Hygienic connections Applications Fristam FPE centrifugal pumps are designed for hygienic processing applications and can be used for transferring various liquid products, depending on the required capacity and product characteristics. Typical applications include: Dairy processing Milk and liquid dairy products Beverage production Food processing Water and process liquids CIP systems Other hygienic liquid applications The pumps have been disassembled and are available from our warehouse in Denmark. Motor power, RPM, and exact capacity are not specified at this time and should be confirmed before purchase. The pumps can be sold individually or together as a package. Location: Denmark Delivery: EXW Denmark Availability: Immediately available

Condition: used, Year of construction: 2016, Overview Complete craft microbrewery around a 250-litre batch brewhouse - the Slowbeer 250, built in 2016 by Škrlj d.o.o. (Slovenia). The package covers the whole process from malt crushing to bottling - brewhouse, two 1,000 L fermenters, hot water tank, glycol chiller, 4-spout bottling unit and malt mill. All main units date from 2016 - a turnkey set for a brewpub or a start-up brewery. Technical data - Brand: Slowbeer - main units built by Škrlj d.o.o., Slovenia - Model: Slowbeer 250 - Škrlj COMPACT BREWHOUSE MINI 250 L (type BHM 250, 2.5 hl) - Year of manufacture: 2016 - Batch capacity: 250 L - Heating: thermal-oil jackets, electrically heated - 400 V, 50 Hz - Material: stainless steel AISI 304 (EN 1.4301), vessel and jackets - Fermentation capacity: 2 x 1,000 L (nominal) Scope of Delivery Kedjzvqi Sjpfx Abnedr - Compact brewhouse | Škrlj (Slowbeer 250) | COMPACT BREWHOUSE MINI 250 L | 250 L per batch, thermal-oil heated, agitator with Bonfiglioli gear motor, Lowara CO350/03K/A wort pump (2019), Pedrollo NGA 1B thermal-oil pump, IPROS TP4001/15 plate heat exchanger, control cabinet with Omron frequency inverters | 2016 - Beer fermenters, 2 units | Škrlj | ZKG 1000 L | nominal 1,000 L each (1,230 L gross volume per vessel), AISI 304, atmospheric vessel 0-50 °C, water/glycol cooling jackets on shell and cone (3.0 bar operating, 6.0 bar test), sample valve, level indicator, CIP spray ball; recirculation pump with cleaning hoses plus one unused spare pump | 2016 - Hot water tank | Škrlj | 1200 L | AISI 304, electric heating 24.4 kW, 0-90 °C, CE 0531 | 2016 - Glycol chiller | MTA | TAEevo TECH 020 | 400 V / 3-ph / 50 Hz, 3.9 kW electrical input, refrigerant R410A, water circuit max. 6 bar, hose circuit for the fermenter jackets, digital temperature control | 2016 - Gravity bottling unit | Mori-Tem | MODERNA B.4 A LE | 4 stainless steel filling spouts, Ebara JESX M5 feed pump, 230 V single-phase 50 Hz | 2016 - Malt roller mill | Egon Sommer Maschinenbau | PICCOLO 11 SB | 1.1 kW three-phase motor (230/400 V) | 2016 Transport dimensions (palletised, approx.) - Brewhouse: 2,400 x 1,200 x 2,200 mm, 660 kg - Fermenters (each): 2,700 x 1,100 x 1,245 mm, 240 kg - Hot water tank: 1,210 x 1,210 x 2,245 mm - Glycol chiller: 1,300 x 600 x 955 mm, 220 kg - Bottling unit: 1,000 x 700 x 1,650 mm, 180 kg - Malt mill: 800 x 600 x 1,200 mm, 90 kg Condition Used - very good to excellent overall condition. Brewhouse, fermenters and malt mill in excellent condition; chiller and bottling unit in good working order. The hot water tank is fully functional, with a light cosmetic dent on the top cover and normal limescale deposits inside. CE declarations and technical documentation are available for every unit except the malt mill, where the documentation is still being confirmed. Availability Immediately. Location: Spain. Dismantling and loading by arrangement.

Condition: used, loading : max. 2.800 kg (depending on the product) all stainless steel vacuum pump not included suitable for cooling PLC control adjustable speed Kdjdpfx Ajzvwp Sjbnsr tilting system to discharge 1 water filter dimensions (l x w x h) : ± 3.490 x 1.820 x 2.250 mm power: 5,9 kW

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 129801012, overall weight: 1,750 kg, total length: 7,400 mm, total width: 1,700 mm, total height: 2,130 mm, power: 4 kW (5.44 HP), input frequency: 50 Hz, input current: 12 A, We offer this very well-maintained vacuum pump FBSW 2012nac vacuum packaging machine, manufactured in 2012. Vacuum pump AM120 NAC for shrink film and vacuum packaging machines Length x Width x Height: 1x 3100x1700x2130 cm - 750kg 1x 4300x1700x2000 cm – 1000kg (on wheels) This is a shrink machine consisting of 2 parts. Location: 65451 Kelsterbach Collection: EXW Kelsterbach / Self-collection For sale is a high-quality vacuum pump, model AM120 NAC, manufactured in Italy, suitable for shrink film and vacuum packaging machines. Technical data • Model: AM120 NAC • Drawing No.: 038501 • Year of manufacture: 2012 • Frequency: 50 Hz • Current consumption: 12 A • Power: 4 kW • Country of manufacture: Italy Condition The vacuum pump is in good used condition. The system is currently out of operation and switched off. Until it was shut down, it was used as intended. Other • Inspection possible by appointment. Kedpfx Aezcyvvebnsdr • Sale from the location 65451 Kelsterbach. • Self-collection by the buyer. If you are interested or have any questions, please contact us. _____ If you have any further questions or require more information, please send us a message or call us.

Year of construction: 2025, operating hours: 255 h, condition: like new (used), functionality: fully functional, We are offering for sale a large-format, 5-axis CNC waterjet cutting machine, PTV WJ4080. The machine was manufactured in 2025, has only approximately 255 operating hours, and is in new condition (like new/demonstration machine). Regular service and maintenance have been performed exclusively by authorized technicians from the manufacturer, PTV. The machine is equipped with superior optional features for maximum precision (5-axis cutting head with bevel compensation) and gentle cutting of brittle materials. The machine is connected and ready for a demonstration. Technical specifications: • Manufacturer: PTV s.r.o. (Czech Republic) • Model: WJ4080-1Z-UJ-PJ-5AX (60°) • Year of manufacture: 2025 • Serial number: 70-1457 • Machine condition: Like new (as new, minimally used) Kjdpfx Abezg Dgxenjdr • Operating hours: approx. 255 hours • Working dimensions: 4,000 x 8,000 mm x +-180 mm • Enclosure protection class: IP54 • Electrical parameters and connection: • Voltage system: TN-C-S, 3+N+PE-400/230 V AC • Network frequency: 50 Hz • Infeed fuse: 25 A • Installed power: 5.5 kW • Power factor COS φ: 0.85 • Control circuit voltage: 24 V DC • Maximum short-circuit current of busbars: 10 kA Key features and technologies: • 5-axis cutting head (60°) with Progress Jet function: A system for active bevel elimination, which ensures a perfectly perpendicular cut and maximum dimensional accuracy, even at high speeds. • Gentle Piercing function: Controlled piercing with a smooth increase in cutting pressure. Ideal for brittle materials (glass, tiles, ceramics, stone, composites), where it completely prevents cracking or delamination of the material. • PTV JETS 3.8/60 Classic high-pressure pump: - Equipped with a frequency converter (dampens shocks, saves electrical energy, and extends the life of high-pressure components). - Integrated auxiliary pump for compensating low pressure in the supply water. • ARSA automatic sludge removal: Continuous mechanical cleaning of the tank/collector from used abrasive + integrated vacuum tube for easy manual cleaning. • Abrasive handling system: Pressurized abrasive feed unit PDA 1500. Bonus to the offer: We will provide 4 tons of high-quality abrasive free of charge with the machine, which allows the new owner to immediately start production without additional initial investment. The machine is fully functional, connected, and can be viewed and tested by prior arrangement. If you have any questions, need further information, or are interested in viewing the machine, please do not hesitate to send us a message or contact us by phone. We will get back to you promptly.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 120 bar, high-pressure hose length: 10 mm, input voltage: 400 V, overall weight: 77 kg, warranty duration: 6 months, temperature: 70 °C, KARCHER HD 13/12-4 ST PRESSURE WASHER NEW PUMP HEAD The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and adjustable nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 120 bar and 1300 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply: 3 phase - 400 V - 50 Hz Discharge capacity (l/h): 1300 Kdjdpjzuatkjfx Abnjr Operating pressure (bar): 120 Maximum pressure (bar): 150 Connected power (kW): 6.5 Weight (kg): 77 Dimensions (L x W x H) (mm): 533 × 420 × 790 Hose length (m): 10 EQUIPMENT: NEW PUMP HEAD NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Kdodpfx Absyq Rdyensr Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: used, Year of construction: 2008, functionality: unexamined, machine/vehicle number: TRGD 08/5-2.5-550-FcV, input voltage: 230 V, Beinlich Radial Piston Pump in mobile setup Kdedpsxiwg Rjfx Abnsr Manufacturer: Beinlich pump systems Manufactured: 2008 Viscosity: 100-1000 mPa.s Max pressure: 200 bar. Medium used for: Glycol, Linseed oil, Acrylates With Lenze series 8200 vector frequency inverter (adjustable speed) Complete with original manuals and diagrams

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m width 3.100 mm all stainless steel adjustable speed variable dwell adjustment Kdsdozvwpljpfx Abner suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading in good condition Applications : • Blanching of vegetables and potato products • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings • Cooking of heads and tongues • Cooking of poultry • Continuous soup production

Year of construction: 1980, operating hours: 30,000 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 04430, Fully automatic machine with - Automatic feed and removal handling - Control of steam and cooling water supply - Cold water pump to increase the cooling capacity Kdjdpfjuauvvex Abner - Set of new tools (designed for the production of 180g 12" records) - Plasticizing unit with suction for vinyl granulate

Condition: good (used), Promoted by APEXPUMPS Bristol UK -type: HPV32.2-7-30-CDAAKR -serial number: 110150-02 -inclusion dimensions: 1650x400x500mm -operating pressure: 27 bar -max. pressure: 40 bar Kodot A U H Ijpfx Abnsdr -mass flow: 360L/min -lifting height: 270m -electrical data: 400V; 30kW