Used Depth Gauge for sale (8,350)

Condition: like new (used), Year of construction: 2026, power: 3 kW (4.08 HP), pressing force: 30 t, stroke length: 150 mm, operating speed: 10 mm/s, reverse speed: 70 mm/s, throat depth: 255 mm, ram plate length: 1,270 mm, Equipment: CE marking, documentation/manual, safety light barrier, Standard Equipment Stroke: 150 mm Distance Between Upper and Lower Dies (Daylight): 265 mm Throat Depth: 255 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Machine Features Double-cylinder upper beam bending system Steel frame construction providing high static and dynamic rigidity Upper beam movement supported by fiber slide bearings High-strength balancing shaft and eccentric bearing system supporting parallelism Motor-controlled angle adjustment with a mechanical stroke system inside the cylinder Nlsdpfozcl S Njx Ad Soc Wide opening and high stroke suitable for use with different dies Easy tonnage adjustment and bottom dead center stop via NC control Hydraulic safety system against overpressure Dual-speed operating system consisting of free descent, bending, and fast return CE-compliant, multi-functional foot pedal with emergency stop Compact hydraulic power unit, top-mounted, with HAWE or Rexroth components Siemens, Pizzato, and Balluff electrical components LEUZE safety system and learning mode NC control unit with 500 programs and 200 lines per program Program transfer via USB Standard upper and lower die set NC-controlled motorized X-axis back gauge (500 mm) Back gauge system with linear slides 0.2 mm positioning accuracy Motor-controlled Y-axis angle adjustment Mobile control panel Front support arms with linear slides Lower die centering bolts Programmable, precise back gauge retraction function Optional Equipment Motorized R-axis Special bending dies Special pedal system with dual-hand + foot control DSP or Fiessler safety systems Extended back gauge distance Additional back gauge fingers Additional front support arm Manual crowning system Motorized crowning system Technical Specifications Bending Force: 30 tons Maximum Bending Capacity: 4 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Stroke: 150 mm Bending Speed: 10 mm/s Free Descent Speed: 70 mm/s Throat Depth: 255 mm Distance Between Upper and Lower Dies: 265 mm Table Width: 130 mm Table Height: 830 mm Main Motor Power: 3 kW X-Axis Motor: 0.55 kW Y-Axis Motor: 0.18 kW Optional R-Axis Motor: 0.25 kW Back Gauge Distance: 500 mm Oil Tank Capacity: 90 L Machine Length: 1780 mm Machine Width: 1375 mm Machine Height: 2160 mm Machine Weight: 1700 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Condition: used, maximum load weight: 26,830 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2027, 3-axle Kässbohrer KSLA RJ Mega low-bed semi-trailer | Extendable 3,500 mm | Widening capability 600 mm VIN: WKVDAS00300125992 Chassis / Components: * Fifth wheel height 950mm * Air suspension * Raise and lower function * Lift axle, 1st axle * Follower steering axle, 3rd axle * 3 x BPW axles * WABCO braking system * JOST landing gear * Load pressure gauge * NATO socket * Tool box * Galvanized widening extensions * Widening brackets * Stake pockets * Overwidth signs with lighting * Rear supports * Tires: 205/65 R17.5 * Remaining tread depth 80-90% * Electric winch NOVAWINCH T-8000 * Radio remote control for winch * Several stake pocket tensioning claws / stake pocket accessories in the toolbox * Large steel toolbox on the platform Superstructure: * Kässbohrer KSLA RJ Mega low-bed semi-trailer * Wheel wells * Wheel well covers * Excavator arm recess * Extendable by 3,500 mm * Widening capability by 600 mm * Loading area length: 11,980 mm + 3,500 mm extension * Width: 2,550 mm + 600 mm widening * Platform height: 820 mm * Fifth wheel height: 1,130 mm * Wooden floor / steel floor * Aluminum side panels on the upper platform * Hydraulic two-part ramps * Left and right ramps can be operated separately hydraulically Weights: Njdpfozcil Tox Ad Selc * Gross weight: 39,000 kg * Payload: 26,830 kg * Tare weight: 12,170 kg * Fifth wheel load: 15,000 kg Other: * First registration: 10.04.2025 * German registration * MOT (TÜV): 05/2027 * Inspection (AU): 10/2027 ----New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export / transfer license plates, and transfer of your purchased vehicles within Germany is also possible. Contact us! We speak the following languages: German, English, and Russian! No liability for printing and typographical errors, changes, prior sales and errors reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for our customers. A particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 11,000 m², you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Obtaining license plates / export license plates We will gladly help you in obtaining export license plates. Processing of customs formalities We will gladly help you with handling customs matters.

Condition: used, maximum load weight: 28,100 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 04/1999, next inspection (TÜV): 06/2026, loading space volume: 45 m³, total width: 2,550 mm, Year of construction: 1999, Equipment: ABS, 3-axle Feldbinder tipping silo semi-trailer, 45 m³ VIN: 0F07197 Chassis / Components: * Air suspension * Lift axle * Haacon support legs * Jost support legs at the rear * Tires: 385/65 R.22,5 * Remaining tread depth: 1. ~40/10% 2. ~20/50% 3. ~20/10% * 3 x BPW Eco axles with drum brakes * 2 x PVC storage boxes * Aluminum rims * NATO plug Superstructure: * Hyva tipping cylinder, max. 220 bar * Volume: approx. 55 m³ * Loading pressure gauge * 1 x outlet at the rear * 4 x manhole covers * 2 x hose connections per side Weights: * Gross vehicle weight 34,000 kg * Payload 28,100 kg * Tare weight 5,900 kg Other: * German registration * Valid MOT (TÜV) New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! No liability for printing and typographical errors, changes, prior sale, and errors. Subject to change! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on our 11,000 m² site. Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. Convince yourself! Our services for you: Loading vehicles We will gladly assist you in loading your purchased vehicles. Organizing special transports We will gladly assist you in organizing special transports. Day passes / export license plates We will gladly assist you in obtaining export license plates/short-term license plates. Nljdpfszcil Hjx Ad Sjc Handling customs formalities We will gladly assist you in handling customs matters.

Condition: new, maximum load weight: 35,450 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 12,740 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLA_RJ 3 / 1N ? 18/24 | Low Loader | Extendable | Wheel Wells | Ramps | 3 Axles Low gooseneck height, small tires! 770 mm loading height Manufacturer: Kässbohrer Model: K.SLA_RJ 3 / 1N ? 18 / 24 Vehicle type: Extendable jumbo low-bed trailer with wheel wells Registration country: Germany Year of manufacture: 2026 Color: RAL 3020 Traffic Red ----Technical Data Dimensions* External length: 13,190 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Gooseneck length: 3,950 mm * Platform height: 770 mm * Fifth wheel height: 1,150 mm * Overall width: 2,550 mm + 600 mm side extension * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm * Locking position: 500 mm * Rear swing door: 2,300 mm ----Weights Unladen weight: approx. 12,556 kg * Permissible total weight (80 km/h): 48,000 kg * Permissible total weight (60 km/h): 52,800 kg * Axle load: 24,000 kg Nljdsyrkpxopfx Ad Ssc * Axle capacity per axle: 8,000 kg * Fifth wheel load capacity: 15,000 kg ----Chassis / Axles 3 BPW axles * Air suspension * 2 fixed front axles * 1 trailing rear axle * Lift axle on 1st axle (load-dependent) * Automatic axle lift control from tractor unit * Air suspension with load gauge * ECAS electronic air suspension system ----Braking System / Electrics WABCO EBS 4S/3M * ABS * RSS roll stability support * Electro-pneumatic dual-circuit braking system * Lighting according to ECE R48 * Aspöck lighting system * Sockets: * 24N (ISO 1185) * 24S (ISO 3731) * 15-pin ADR (ISO 12098) ----Wheels / Tyres Tyre size: 205/65 R17.5 * 12 wheels * Steel rims * M+S tyres * 3PMSF winter tyres * Tyre pressure monitoring system * Spare wheel holder on front wall ----Chassis / Superstructure High-strength S700 MC steel chassis * 2" kingpin (bolted) * Gooseneck with 90° vertical corners * Partial metallization Zn/Al corrosion protection * 45 mm hardwood floor * Tread plate over wheels ----Loading Area / Extensions Side extension up to 300 mm * 100x100 box section sockets * Galvanized steel extensions * Hardwood boards (3 × 100 mm) * Storage box for extension boards ----Wheel Wells / Excavator Trough Wheel well for vehicle transport * Excavator trough at rear * Width: 750 mm * Depth: 310 mm * Length: 3,000 mm * Wheel well bridges made of hardwood ----Ramps Foldable drive-on ramps * Ramp capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * Ramp surface made of hardwood * Ramp safety with tension chain ----Load Securing Lashing points: Gooseneck: * 2 × 2 pcs 5 t * 1 × 2 pcs 10 t * Platform outside: * 3 × 2 pcs 5 t * 4 × 2 pcs 10 t * Under outer frame: * 2 × 2 pcs 8 t * Platform: * 4 × 2 pcs 6 t (see purchase contract 20186783) Additional securing: * 5 × 2 stake pockets * 3 × 2 multiple stake pockets * 8 × 2 plug-in stakes * Container locks for 20 ft / 30 ft containers ----Equipment / Accessories Toolbox (700 × 400 × 360 mm) * Revolving warning lamp * Rear work lamp * Extendable warning signs with LED * Side marking tape * Rear marking tape * Wheel chocks * Wabco Smartboard * Connection cable (NATO socket) For further information, please do not hesitate to contact us.

Condition: new, maximum load weight: 37,581 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4,285 mm * Platform length 8,950 mm * Extension 6,900 mm * Extension locking position 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Axle load 10 tons Nledpfx Adomtwyps Soc * Overall width 2,550 mm * Total technical weight (80 km/h) 48,000 kg * Gross vehicle weight (60 km/h) 50,000 kg * Unladen weight 10,419 kg CHASSIS: BPW axles with air suspension and drum brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * Wabco brake system * 12 tires 245/70 R17.5 CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm thick hardwood floor * 9x2 side extensions extendable up to 300 mm * Telescopic rear support winch with 50 tons capacity * Mechanically folding rear outriggers with 45 tons capacity * Wheel recesses with dimensions of 420 mm depth, 800 mm width, * Suitable for tire diameters of max. 1,800 mm RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings * Stake pockets * stanchions * Container locks suitable for 1x20 ft. , 1x40 ft. or 1x45 ft. + 4 twist locks * Front wall made of steel material, height 1,500 mm with Code XL certificate ACCESSORIES: 1x plastic toolbox * Stake box with space for 18 stakes * 1x rotating beacon * Tire well bridge for closing the wheel wells Chassis color RAL 3020 traffic red For further information please do not hesitate to contact us

Condition: new, maximum load weight: 37,581 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4,285 mm * Platform length 8,950 mm * Extension 6,900 mm * Extension locking position 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Axle load 10 tons * Overall width 2,550 mm * Total technical weight (80 km/h) 48,000 kg * Gross vehicle weight (60 km/h) 50,000 kg * Unladen weight 10,419 kg CHASSIS: BPW axles with air suspension and drum brakes Nlsdotn Hlmjpfx Ad Sjc * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * Wabco brake system * 12 tires 245/70 R17.5 CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm thick hardwood floor * 9x2 side extensions extendable up to 300 mm * Telescopic rear support winch with 50 tons capacity * Mechanically folding rear outriggers with 45 tons capacity * Wheel recesses with dimensions of 420 mm depth, 800 mm width, * Suitable for tire diameters of max. 1,800 mm RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings * Stake pockets * stanchions * Container locks suitable for 1x20 ft. , 1x40 ft. or 1x45 ft. + 4 twist locks * Front wall made of steel material, height 1,500 mm with Code XL certificate ACCESSORIES: 1x plastic toolbox * Stake box with space for 18 stakes * 1x rotating beacon * Tire well bridge for closing the wheel wells * Ramp box Chassis color nova grey For further information please do not hesitate to contact us

Condition: used, maximum load weight: 29,811 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2022, loading space length: 8,785 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 3,690 mm, Equipment: ABS, VEHICLE NUMBER: 2976 ----* Exterior Features: * Galvanized chassis * Full-capacity aluminum drop supports * Compressed air connection at the rear * Reinforced rear edge * 1 pair of additional tension locks * Rear tailgate with door and swinging function * 2 grain discharge sliders * 1 discharge funnel with sack * Extendable access ladder at the rear * Holder for hydraulic hose in park position on work platform * Additional bracing on the work platform * Load pressure gauge * Aluminum air reservoir * Holder for broom and shovel * LED cargo area lighting * Rolling tarpaulin * Roof-shaped cover frame with transverse tension chain and roof bows * Tarpaulin operating pole * LED perimeter lighting * LED work lights * LED tail lights * Toolbox on both sides * 30-liter plastic water tank * 4000mm aluminum hook-on ladder with side mount * Tow coupling with pre-inserted pin, left in driving direction * 'A' signage for waste transport ----* Technical Specifications: * ROTOS axles with disc brakes Nljdpfoy Haaksx Ad Sjc * Lift axle on 1st axle * Tires 385/65 22.5 * Tread depth in mm: 1st axle: 10/14, 2nd axle: 16/16, 3rd axle: 10/10 * Tire pressure monitoring system * Automatic lowering during tipping operation * HYVA tipping cylinder 190 bar * 1" screw coupling, female thread * 8mm thick trough floor * Internal seams fully welded * Fifth-wheel height: 1,150mm - 1,250mm * Loading height: 3,670mm * Unladen weight: 6,189kg * Main inspection/TÜV: 06/26, Safety Inspection: 12/26 ----* Hire Purchase Example: €515 monthly payment, 60-month term, 10% down payment (your used vehicle can qualify), 10% final payment. * Delivery to your location possible. Trade-in/ Leasing/ Financing. We make it happen!

Condition: good (used), Year of construction: 2017, You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. Features of the device: Press brake Schechtl MAX 200 Testing possible Degree indicator Bending length slightly over 2m Sheet thickness 2.5 mm steel – sheet – aluminum, zinc, etc. Standard die – radius for aluminum, zinc would be optional, as would an extension and special die! Foot pedal for operation Optional depth stop Optional sheet metal shear, 2m, 3mm available (offer as a set possible) We also have Schechtl MSB 200 - 3mm, Schechtl MA 200 - 2mm, Schechtl HA 200 - 2mm RAS (rectilinear abrasive saw) with 2m - 2mm, segmented, and many more from 1m to 6m. Sheet metal shear HT 200 or sheet metal shear Schröder electric 2m - 2.5mm would be optional. Nljdpfszb I I Rjx Ad Soc Important! Optionally, you can find and purchase many machines and machine accessories, such as various dies, depth stops – everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, slitting and profiling machines – accessories (beading attachment, round rolls for gutter production, back gauge, etc.), as well as other hand tools and spare parts in stock from many top manufacturers in our shop. I am always available to answer any questions. You will receive an invoice with VAT shown. Free loading is possible – weight approx. 2000 kg. Inspection and testing are possible and welcome after arranging an appointment by telephone – 0175 248 1975. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you on 0175 248 1975. Collection by the buyer himself (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approximately 3 minutes from the A3 and A81 motorways.

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 175 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, throat depth: 410 mm, ram plate length: 3,700 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B175-3700 – 175 Ton x 3700 mm CNC Hydraulic Press Brake The HPB B175-3700 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precise and repeatable sheet metal bending operations, offering a bending force of 175 tons and a bending length of 3700 mm. Standard Features: Stroke: 260 mm Lower – Upper Die Gap: 465 mm Throat Depth: 410 mm Bending Length: 3700 mm Distance Between Columns: 3200 mm ESA S830 CNC Control Unit 10” 2D Touchscreen Manual bending sequence and collision control Automatic compensation calculation Angle measurement and correction 2D drawing 2 USB ports Offline software CT-BEND Servo Motorized Back Gauge X-axis: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm R-axis: 250 mm Hardened ball screw Linear slide system Optional X-axis: 1000 mm Tooling System 2 back gauge fingers European-type Promecam quick die clamping system CRONOSSTECH special narrow lower table Eurostamp ES1260 upper die Eurostamp ES2067 lower die Amada compatible tooling system Standard Equipment B Series open frame design GIVI linear scales LED lighting VDE electrical panel Schneider or Siemens electrical components HAWE hydraulic block Eckerle pump Siemens drive Single pedal system Energy-saving Standby function 2 adjustable front support arms Optional Features CT-BEND X+R servo motorized back gauge AKAS II front safety laser system PLC safety module Rear light curtains Delem DA53Tx CNC control unit CNC controlled motorized compensation system X-axis 1000 mm extension Technical Specifications Bending Force: 175 Tons Bending Length: 3700 mm Distance Between Columns: 3200 mm Stroke: 260 mm Nedpfx Adozb Inks Solc Lower – Upper Die Gap: 465 mm Throat Depth: 410 mm Table Height: 955 mm Machine Length: 5300 mm Machine Width: 2430 mm Machine Height: 2990 mm Approach Speed: 180 mm/s Return Speed: 130 mm/s Bending Speed: 10 mm/s Oil Tank: 180 L Weight: 10,500 kg Main Motor: 15 kW X-axis Speed: 300 mm/s R-axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. The country of origin is Turkey. 🇹🇷

Condition: new, Year of construction: 2026, power: 22 kW (29.91 HP), pressing force: 220 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 110 mm/s, throat depth: 410 mm, ram plate length: 6,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B220-6100 – 220 Ton x 6100 mm CNC Hydraulic Press Brake The HPB B220-6100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for the precise, powerful, and repeatable bending of long sheet metal parts, featuring a bending force of 220 tons and a bending length of 6100 mm. It is suitable for applications in heavy industry, steel construction, energy, machine manufacturing, and metalworking. The machine offers high efficiency thanks to its ESA S630 CNC control unit, servo-motor-driven back gauge system, European-type die clamping system, robust frame structure, and professional equipment. Standard Features Stroke: 260 mm Bottom – Top Die Clearance: 465 mm Throat Depth: 410 mm Bending Length: 6100 mm Distance Between Columns: 5100 mm ESA S630 CNC Control Unit 10” 2D Touchscreen Graphical Display Manual bending sequence and collision control calculation Angle correction calculation Angle measurement and correction 2D drawing 2 USB ports Offline software CT-BEND Servo Motorized X-Axis Back Gauge X-axis travel distance: 750 mm X-axis speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame Hardened ball screw spindle Hardened linear guides Optional X-axis: 1000 mm Die and Back Gauge System 2 flat-type, 3-stage back gauge fingers Manual Z-axis movement European-type quick Promecam upper die clamp CRONOSSTECH special narrow lower table Standard upper die ES1260, H: 67 mm, 85°, R: 0.8 mm Standard lower die ES2067, 60 x 60 mm, V: 16-22-35-50 mm Amada-compatible tooling system Other Standard Equipment Nledpfxjzbyvtj Ad Ssc B-series open cabin design Black plexiglass protective panels Single pedal system GIVI linear scales Upper beam LED lighting VDE electrical panel Schneider or Siemens electrical equipment Hoerbiger / HAWE hydraulic block Eckerle pump Siemens drive Energy-saving standby function 2 standard sliding front support arms Optional Features AKAS II front safety laser system + PLC + rear light barriers Delem DA53Tx 15” CNC control unit Delem DA58Tx 18.5” CNC control unit CNC-controlled motorized crowning system X-axis extension option up to 1000 mm Additional front support arm Additional back gauge fingers Custom bending dies Technical Specifications Bending Force: 220 Tons Bending Length: 6100 mm Distance Between Columns: 5100 mm Stroke: 260 mm Bottom-Top Die Clearance: 465 mm Throat Depth: 410 mm Table Height: 1060 mm Machine Length: 7560 mm Machine Width: 2570 mm Machine Height: 3440 mm Approach Speed: 150 mm/s Return Speed: 110 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 290 L Machine Weight: 20,000 kg Main Motor Power: 22 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. The country of origin is Turkey.

Condition: new, Year of construction: 2026, power: 4 kW (5.44 HP), pressing force: 60 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, throat depth: 410 mm, ram plate length: 1,250 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB A60-1250 – 60 Ton x 1250 mm CNC Hydraulic Press Brake The HPB A60-1250 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precision sheet metal bending applications, offering a bending force of 60 tons and a bending length of 1250 mm. Thanks to the ESA S630 CNC control unit, servo-motor driven back gauge system, compact frame structure, and professional tooling equipment, it provides high precision and efficiency for workshops, metal processing companies, and industrial manufacturers. Standard Features Stroke: 210 mm Daylight (Bottom – Top Die Gap): 415 mm Throat Depth: 410 mm Bending Length: 1250 mm Distance Between Columns: 1100 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 130 mm/sn Accuracy: ±0.10 mm Manual R-axis movement: 190 mm Steel frame construction Hardened ball screw spindle Hardened linear slide system Optional 1000 mm X-axis Nljdpezbyu Nofx Ad Ssc Back Gauge Fingers 2 pieces Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Manual Promecam Upper Die Holder E7 Quick tool change Safe operation Structure to prevent die fall CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slot can be applied upon request Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible A Series Open Cabinet Design CRONOSSTECH Premium open cabinet Wide field of view Ergonomic design Professional appearance Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel according to VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measurement system Supports the operator Optional Features AKAS II Front Safety Laser System + PLC + Rear Light Curtains Finger protection system Laser-based safety system Increases operator safety CE compliance Maximum working distance: 4.3 meters Technical Specifications Bending Force: 60 Ton Bending Length: 1250 mm Distance Between Columns: 1100 mm Stroke: 210 mm Daylight (Bottom – Top Die Gap): 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 3060 mm Machine Width: 2195 mm Machine Height: 2730 mm Approach Speed: 150 mm/sn Return Speed: 120 mm/sn Bending Speed: 10 mm/sn Oil Tank Capacity: 95 L Machine Weight: 3400 kg Main Motor Power: 4 kW Back Gauge X-Axis Speed: 300 mm/sn Back Gauge R-Axis Speed: 250 mm/sn This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELGO, controller model: P40T 5,7", working width: 3,100 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, back gauge adjustment: CNC-controlled, power: 37 kW (50.31 HP), Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HGM B20-3100 – 20 mm x 3100 mm Hydraulic Guillotine Shear The HGM B20-3100 Hydraulic Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for heavy industry, steel construction, shipbuilding, the energy sector, and high-capacity metalworking applications. It features a 20 mm sheet metal cutting capacity and a 3100 mm cutting length. Thanks to the ELGO P40T touch-screen CNC control unit, motorized back gauge system, Rexroth hydraulic system, and dual-speed cutting technology, it offers high performance and precise cutting. Standard Features Throat Depth: 250 mm Cutting Length: 3100 mm Cutting Angle: 2.75° Distance Between Columns: 3410 mm Cutting Capacity: 20 mm ELGO P40T 5.7” Touch-Screen CNC Control Unit 5.7” TFT touch screen Manual operating mode Single-part processing Program memory Up to 2A digital outputs Automatic calculation of cutting angle and pressure based on material Automatic cutting program Rear sheet support system RTS (Return To Sender) function Manual Blade Clearance Adjustment System Programmable Back Gauge Retraction System Automatic lifting for parts exceeding 1000 mm CRONOSSTECH X-axis Motorized NC-Controlled Back Gauge X-axis travel distance: 1000 mm Speed: 150 mm/s Accuracy: ±0.05 mm Steel body construction Hardened ball screw Optionally available with 1250 mm or 1500 mm Front Support Arms 1000 mm length Scale measuring system T-slot Retractable stopper Retractable Front Finger Guard System 1000 mm retractable front guard cover Optional full-size retractable guard system Upper Blade 2 cutting edges 450 N/mm² capacity Lower Blade 4 cutting edges 450 N/mm² capacity Foot Pedal with Emergency Stop Rear Safety System (EOS2E 2BX) 2 laser beams Type 2 – SIL1 – SILCL1 safety level 510 mm monitoring height Nedszbyupjpfx Ad Selc 3 ms response time IP65 / IP67 protection class 24V DC power supply Emergency Stop Buttons Shadow Light Cutting Line Ball Transfer Table Schneider or Siemens Electrical Equipment (400V / 50Hz) CRONOSSTECH Premium Front and Rear Cabin Guards Professional appearance Wide field of vision Ergonomic design Rexroth Hydraulic System Dual-Speed Cutting System Two different cutting speeds Faster operation on short parts High-speed cutting up to 60% of maximum capacity Energy-saving standby mode Optional Features 1250 mm or 1500 mm X-axis back gauge Full-size retractable front guard system Technical Specifications Cutting Capacity (450 N/mm²): 20 mm Cutting Capacity (700 N/mm²): 13 mm Cutting Length: 3100 mm Cutting Angle: 2.75° Number of Pressure Cylinders: 17 Cutting Speed / Fast Mode: 6 / 9 hpm Distance Between Columns: 3410 mm Table Height: 925 mm Table Width: 605 mm Throat Depth: 250 mm Back Gauge Travel (X-axis): 1000 mm Machine Length: 4790 mm Machine Width: 3850 mm Machine Height: 2540 mm Oil Tank Capacity: 495 L Motor Power: 37 kW Machine Weight: 19 tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 100 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 410 mm, ram plate length: 2,600 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B100-2600 – 100 Ton x 2600 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Bottom – Top Die Gap: 465 mm Throat Depth: 410 mm Bending Length: 2600 mm Distance Between Columns: 2150 mm ESA S830 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pcs Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Quick Die Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slots can be applied according to the molds to be used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Cabin Design Black plexiglass protection panels Wide field of vision Nedpfxozbyt Se Ad Selc Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel according to VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 pcs standard sliding front support arms Height adjustable Scale measurement system Supports the operator Optional Features CT-BEND Servo Motorized X + R Axis Back Gauge System Servo motorized X and R-axis movement X-axis travel distance: 750 mm Accuracy: ±0.05 mm X-axis can be extended up to 1000 mm CNC Controlled Motorized Crowning System MVD cammed and G.E.C. motorized system Automatic calculation by CNC Faster adjustment time Higher bending accuracy Longer machine life AKAS (FPSC) Front Safety Laser System + Rear Light Curtain Laser-based finger protection system Increases operator safety Fast detection and response time CE compliance Maximum working distance: 4.3 meters Technical Specifications Bending Force: 100 Ton Bending Length: 2600 mm Distance Between Columns: 2150 mm Stroke: 260 mm Bottom-Top Die Gap (Daylight): 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 4220 mm Machine Width: 2230 mm Machine Height: 2950 mm Approach Speed: 200 mm/s Pressing Speed: 10 mm/s Return Speed: 135 mm/s Oil Tank Capacity: 170 L Machine Weight: 6430 kg Main Motor Power: 7.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Powerful hydraulic workshop press with movable cylinder (via handwheel), ideal for large and heavy workpieces. Picture shows WHP 160 Technical data: Nsdpfx Adjp Dt Uuo Selc Capacity: 250 t Installation height: 900 mm Working area, max.: 1300 x 450 mm Piston stroke: 400 mm Forward speed: 8.58 mm/s Return speed: 13.03 mm/s Motor power: 15 kW Width: 2450 mm Depth: 1200 mm Height: 2650 mm Weight, approx.: 3100 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Your advantages: - One of the heaviest versions on the market - Available with tonnages of up to 500 tons - Maximum performance and stability - Different upright widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - SPS control - Working plate with T-slots for fixing irregularly shaped components - Lateral hydraulic cylinder adjustment

Condition: excellent (used), mileage: 618,036 km, power: 316 kW (429.64 HP), first registration: 01/2020, fuel type: diesel, tire size: 315/70 R 22.5, axle configuration: 4x2, fuel: diesel, fuel tank capacity: 1,158 l, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2020, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, onboard computer, parking heater, power assisted steering, power mirror, second fuel tank, soot filter, spoiler, traction control, trailer coupling, = Additional options and accessories = - Adaptive cruise control - Alarm system - Aluminum fuel tank - Outside temperature gauge - Heated mirrors - Passenger seat - Leaf spring suspension - DAB radio - Sunroof - Roof spoiler - Differential lock - Digital tachograph - Air conditioning - Air suspension - Particle filter - Radio/CD player - Sleeper cab - Side door - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,419 cc Axle configuration Tire size: 315/70 R 22.5 Brakes: Disc brakes Front axle: Max. axle load: 7500 kg; Steered; Tire tread depth left: 10%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Rear axle: Dual tires; Differential lock; Max. axle load: 11500 kg; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 7,826 kg Payload: 11,174 kg GVW: 19,000 kg Condition Nledpfx Aszbxqvjd Sjc Technical condition: very good Optical condition: very good

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm Nlodpfx Adovc Amts Sec total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm Nlsdpfev A S Efsx Ad Sjc table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: a=10; h=18; b=18; c=8mm Features: Two-way digital ACU-RIDE display *

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 100 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 40 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B100-2100 – 100 Ton x 2100 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Distance between upper and lower die (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance between columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D touchscreen graphic display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Back Gauge System X-axis travel: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European-Type Quick Tooling Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Special Short Lower Table 70 mm or 90 mm lower table T-slots can be applied according to the tools to be used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Frame Design Black plexiglass protective panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel in accordance with VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measuring system Supports the operator Optional Features CT-BEND Servo Motorized X + R Axis Back Gauge System Servo motorized X and R axis movement X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis can be extended up to 1000 mm AKAS II Front Safety Laser System + Rear Light Curtains Finger protection system Laser-based safety system Increases operator safety CE compliance Maximum working distance: 4.3 meters Delem DA66T CNC Control Unit (17” Touchscreen) 17” 2D touchscreen graphic display 2D drawing and 3D visualization / product simulation User-friendly interface 1 GB hard drive Automatic bending sequence and collision control calculation Angle correction calculation (Crowning) Nljdpfozbrf Tsx Ad Ssc Angle measurement and correction Windows-based operating system 2 USB ports Data backup Offline Profile-TL programming feature Technical Specifications Bending Force: 100 Ton Bending Length: 2100 mm Distance between columns: 1600 mm Stroke: 210 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 5000 kg Main Motor Power: 5.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 60 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 410 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B60-2100 – 60 Ton x 2100 mm CNC Hydraulic Press Brake The HPB B60-2100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precise sheet metal bending applications, offering a bending force of 60 tons and a bending length of 2100 mm. Standard Features Stroke: 260 mm Daylight (Distance between lower and upper die): 465 mm Throat Depth: 410 mm Nlsdpfjzbrfasx Ad Soc Bending Length: 2100 mm Distance between Columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSSTECH Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Quick Die Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slots can be applied according to the tools to be used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Frame Design Black plexiglass protection panels Wide field of vision Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel conforming to VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measurement system Supports the operator Optional Features Servo Motorized X + R Axis Back Gauge System Servo motorized X and R-axis movement X-axis travel distance: 750 mm Accuracy: ±0.05 mm X-axis can be extended up to 1000 mm AKAS II Front Safety Laser System + Rear Light Curtains Finger protection system Laser-based safety system Increases operator safety CE compliance Maximum working distance: 4.3 meters Delem DA53Tx CNC Control Unit (15” Touchscreen) 15” color touchscreen 2D product drawing and simulation Angle correction calculation Angle measurement and correction USB data transfer Data backup Offline profile-TL programming Remote access and fault management Technical Specifications Bending Force: 60 Ton Bending Length: 2100 mm Distance between Columns: 1600 mm Stroke: 260 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 4290 kg Main Motor Power: 5.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 22 kW (29.91 HP), pressing force: 270 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, throat depth: 410 mm, ram plate length: 3,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B270-3100 – 270 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B270-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for heavy industry, steel construction, machine manufacturing, and precision sheet metal forming applications, offering a bending force of 270 tons and a bending length of 3100 mm. Standard Features Stroke: 260 mm Daylight (Distance between Upper and Lower Die): 465 mm Throat Depth: 410 mm Bending Length: 3100 mm ESA S830 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Manual bending sequence and collision control calculation Automatic angle correction (camber compensation calculation) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm R-axis travel distance: 250 mm Heavy-duty steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-step (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Quick Die Clamping System (Promecam Type) Quick tool change Secure locking system Practical operation European Type Narrow Lower Table 70 mm or 90 mm special lower table T-slots can be applied according to tooling requirements Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Tons/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Tons/Meter Amada compatible Nledpfozbrc Sex Ad Soc B Series Open Frame Design Black plexiglass protection panels Wide field of vision Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel conforming to VDE standards Schneider or Siemens electrical equipment High-quality hydraulic block system Eckerle hydraulic pump Siemens main drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measuring system Optional Features Servo Motorized X + R Axis Back Gauge System Servo-controlled X-axis movement X-axis travel distance: 750 mm Accuracy: ±0.05 mm R-axis travel distance: 250 mm Hardened linear guides and ball screw system X-axis can be extended up to 1000 mm CNC Controlled Motorized Crowning System Motorized cam system Automatic calculation by CNC Faster adjustment time Higher bending accuracy Longer machine life Front Safety Laser System + Rear Light Curtains Laser-based finger protection system Increases operator safety Fast detection and response time Maximum working distance: 4.3 meters Technical Specifications Bending Force: 270 Tons Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 260 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 960 mm Machine Length: 4840 mm Machine Width: 2500 mm Machine Height: 3040 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 290 L Machine Weight: 12,300 kg Main Motor Power: 22 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 4 kW (5.44 HP), pressing force: 40 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, throat depth: 410 mm, ram plate length: 1,250 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB A40-1250 – 40 Ton x 1250 mm CNC Hydraulic Press Brake The HPB A40-1250 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precision sheet metal bending applications, offering a bending force of 40 tons and a bending length of 1250 mm. Thanks to the ESA S630 CNC control unit, servo motor-driven back gauge system, compact body structure, and professional tooling equipment, it provides an efficient solution for workshops, metal processing companies, and industrial manufacturers. Standard Features Stroke: 210 mm Distance between Upper and Lower Dies (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 1250 mm Distance Between Columns: 1100 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSS Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 130 mm/s Accuracy: ±0.10 mm Manual R-axis movement: 190 mm Steel body construction Hardened ball screw Linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Flat type 3-step (10 mm / 20 mm / 30 mm) Manual Z-axis movement European Type Manual Promecam Upper Die Holder E7 Quick tool change Safe operation Structure preventing the dies from falling CRONOSS Special Narrow Lower Table 70 mm or 90 mm lower table T-slot can be applied upon request Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die angle: 85° Die height: 60 mm Material: C45 Maximum capacity: 80 Ton/Meter A Series Open Cabin Guarding CRONOSS Premium open cabin Wide field of vision Ergonomic design Professional appearance Single Pedal System (P2) Encoder Linear Scales Upper Beam LED Lighting VDE Electrical Panel Schneider or Siemens Electrical Components Hoerbiger (HAWE) Hydraulic Block Eckerle Hydraulic Pump Energy-Saving Standby Function 2 Sliding Front Support Arms Height adjustable Scale measuring system Operator support system Optional Features AKAS II Front Safety Laser System + Rear Light Curtains AKAS® II laser safety system Finger protection system Laser protection in line with the upper die Increases operator safety CE conformity Maximum working distance: 4.3 meters Technical Specifications Bending Force: 40 Tons Bending Length: 1250 mm Distance Between Columns: 1100 mm Stroke: 210 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 3060 mm Machine Width: 2195 mm Machine Height: 2730 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Nledpfx Adezbrcro Ssc Bending Speed: 10 mm/s Oil Tank Capacity: 95 L Machine Weight: 3400 kg Main Motor Power: 4 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 100 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, throat depth: 410 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B100-3100 – 100 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B100-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precise and repeatable sheet metal bending operations, offering a bending force of 100 tons and a bending length of 3100 mm. Njdpfozbrb Isx Ad Selc It provides high performance for metalworking and industrial production facilities, thanks to its ESA S830 CNC control unit, servo motor-driven back gauge system, high-rigidity frame structure, and professional tooling equipment. Standard Features Stroke: 260 mm Bottom – Top Die Gap: 465 mm Throat Depth: 410 mm Bending Length: 3100 mm ESA S830 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSS Servo Motorized X-R Axis Back Gauge System X-axis travel distance: 750 mm X-axis speed: 250 mm/s Accuracy: ±0.05 mm R-axis travel distance: 250 mm Robust steel frame construction Hardened ball screw Linear guide system Optionally, the X-axis can be extended up to 1000 mm Back Gauge Fingers 2 pcs Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement European Type Quick Clamping Promecam Upper Die Holder E7 Quick tool change Safe operation Practical and ergonomic design CRONOSS Special Narrow Lower Table 70 mm or 90 mm lower table, depending on machine tonnage T-slot can be applied upon request Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die angle: 85° Die height: 60 mm Material: C45 Maximum capacity: 80 Ton/Meter B Series Open Housing CRONOSS Premium open housing Black plexiglass protection panels Wide field of view Ergonomic design Single Pedal System (P2) GIVI Linear Scales LED Lighting VDE Electrical Panel Schneider or Siemens Electrical Components Hoerbiger (HAWE) Hydraulic Block Eckerle Hydraulic Pump Siemens Drive Energy-saving standby function 2 Standard Sliding Front Support Arms Height adjustable Scale measuring system Operator support system Optional Features CT-BEND Servo Motorized X+R Axis Back Gauge System Fully automatic movement in X and R axes Manual movement in Z1 and Z2 axes X-axis can be extended up to 1000 mm CNC Controlled Motorized Crowning System CRONOSS cam system G.E.C. motorized structure Automatic calculation by CNC More precise and uniform bending Does not require operator intervention AKAS FPSC Front Safety Laser System + Rear Light Curtain CE-compliant safety system Finger protection function Maximum working distance: 4.3 meters Technical Specifications Bending Force: 100 Tons Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 260 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 905 mm Machine Length: 4670 mm Machine Width: 2230 mm Machine Height: 2950 mm Approach Speed: 200 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 180 L Machine Weight: 6780 kg Main Motor Power: 7.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 40 t, stroke length: 160 mm, operating speed: 10 mm/s, reverse speed: 90 mm/s, throat depth: 320 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB NC 40-1550 – 40 x 1550mm Ton NC Hydraulic Press Brake The HPB NC 40-1550 Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precision sheet metal bending applications, featuring a bending force of 40 tons and a bending length of 1550 mm. Thanks to its compact structure, NC-controlled axes, steel body providing high rigidity, and user-friendly control system, it offers an efficient solution for workshops, metal processing companies, and industrial manufacturers. Standard Features Stroke: 160 mm Daylight Opening: 380 mm Throat Depth: 320 mm Bending Length: 1550 mm Distance Between Columns: 1260 mm Double-cylinder upper beam structure Steel body and upper beam providing high static and dynamic rigidity Adjustable upper beam system with fiber slide support High-strength balancing shaft and eccentric bearing system supporting parallelism Motor-controlled angle adjustment with mechanical stroke system inside the cylinder Wide stroke and daylight opening suitable for using different tools Easy tonnage and bottom dead center adjustment via NC control Hydraulic safety system against overpressure Dual-speed operating system (free fall, bending, fast return) Multi-functional foot pedal with emergency stop, compliant with CE standards Top-mounted hydraulic power unit with HAWE or REXROTH components SIEMENS, PIZZATO, and BALLUFF electrical equipment LEUZE safety system and learning mode NC control unit with 500 programs and 200 lines of memory per program USB data uploading and backup feature Standard upper and lower tool set NC-controlled motorized X-axis back gauge system 500 mm travel distance 0.2 mm positioning accuracy Motorized Y-axis angle adjustment Mobile control panel Front support arms with linear slides Bottom die centering and fixing bolts Programmable precision back gauge function Optional Features Motorized R-axis Special bending tools and dies Double-hand + foot controlled special pedal system DSP or FIESSLER safety systems Extended back gauge system Additional back gauge fingers Additional front support arm Manual crowning system Motorized crowning system Technical Specifications Bending Force: 40 Tons Bending Capacity*: 4 mm Working Length: 1550 mm Distance Between Columns: 1260 mm Stroke: 160 mm Bending Speed: 10 mm/s Fast Lowering Speed: 90 mm/s Throat Depth: 320 mm Daylight Opening: 380 mm Nlodpfezbq U Hex Ad Sjc Table Width: 100 mm Bottom Table Height: 845 mm Main Motor Power: 5.5 kW X-Axis Motor Power: 0.75 kW Y-Axis Motor Power: 0.37 kW R-Axis Motor Power (Optional): 0.25 kW Back Gauge Distance: 600 mm Oil Tank Capacity: 120 L Machine Length: 2000 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 3450 kg This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: ELGO, controller model: ELGO P40T 5,7 ", working width: 4,000 mm, stroke rate (min.): 12 1/min, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, back gauge adjustment: CNC-controlled, power: 30 kW (40.79 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, HGM B16-4000 – 16 mm x 4000 mm Hydraulic Guillotine Shear The HGM B16-4000 Hydraulic Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for heavy industry, steel construction, shipbuilding, machine manufacturing, and high-capacity sheet metal processing applications, offering a 16 mm sheet metal cutting capacity and a 4000 mm cutting length. It provides precise and efficient cutting thanks to the ELGO P40T touch-screen CNC control unit, automatic blade gap adjustment system, motorized back gauge system, and Rexroth hydraulic system. Standard Features Throat Depth: 250 mm Cutting Length: 4000 mm Distance Between Columns: 4580 mm Cutting Capacity: 16 mm ELGO P40T 5.7” Touch-Screen CNC Control Unit 5.7” TFT touch screen Manual operation mode Single-piece processing Program memory Up to 2A digital outputs Automatic calculation of blade gap, cutting angle, and pressure adjustment based on material Automatic cutting program Back sheet support system with RTS function Automatic Blade Gap Adjustment System Automatic calculation and adjustment based on the thickness of the sheet to be cut Programmable Back Gauge Retraction System Automatic lifting for parts larger than 1000 mm Motorized NC Controlled Back Gauge on X-axis X-axis travel distance: 1000 mm Speed: 150 mm/s Accuracy: ±0.05 mm Steel body Hardened ball screw spindle Front Support Arms 1000 mm length Ruler T-slot Retractable stopper Retractable Front Finger Protection System 1000 mm retractable front protection guard Upper Blade 2 cutting edges 450 N/mm² capacity Lower Blade 4 cutting edges 450 N/mm² capacity Foot Pedal with Emergency Stop Rear Safety System (EOS2E 2BX) 2 laser beams Type 2 – SIL1 safety level 510 mm monitoring height 3 ms response time IP65 / IP67 protection class Shadow Light Cutting Line Ball Transfer Table Schneider or Siemens Electrical Equipment (400V / 50Hz) Premium Front and Rear Guarding Rexroth Hydraulic System Energy-Saving Standby Mode Optional Features Pneumatic Sheet Support System (Type 2 – 4-Position RTS Function) 4-position pneumatic support system Stable support for large-sized sheets Reduces sheet bending and deformation RTS (Return To Sender) function Increases operator comfort and safety Extended X-Axis Back Gauge 1250 mm 1500 mm Extended Front Support Arms 1500 mm 2000 mm 3000 mm Full-Length Retractable Front Protection System Technical Specifications Cutting Capacity (450 N/mm²): 16 mm Cutting Capacity (700 N/mm²): 10 mm Cutting Length: 4000 mm Cutting Angle: 0.5° – 3.0° Number of Pressure Cylinders: 18 Cutting Speed / Fast Mode: 6 / 12 hpm Distance Between Columns: 4580 mm Table Height: 1010 mm Table Width: 700 mm Throat Depth: 250 mm Back Gauge Movement (X-axis): 1000 mm Machine Length: 5980 mm Machine Width: 3750 mm Machine Height: 2825 mm Oil Tank Capacity: 390 L Motor Power: 30 kW Machine Weight: 21.5 tons Nljdozbqzyepfx Ad Sec This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELGO, controller model: ELGO P40T 5.7”, working width: 3,100 mm, stroke rate (min.): 14 1/min, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, power: 22 kW (29.91 HP), Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, HGM B13-3100 – 13 mm x 3100 mm Hydraulic Guillotine Shear The HGM B13-3100 Hydraulic Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for metal processing, steel construction, machine manufacturing, and general sheet metal processing applications. It features a 13 mm sheet metal cutting capacity and a 3100 mm cutting length. Thanks to the ELGO P40T touch screen NC control unit, motorized back gauge system, Rexroth hydraulic system, and double-speed cutting technology, it offers precise and efficient cutting. Standard Features Throat Depth: 250 mm Cutting Length: 3100 mm Cutting Angle: 2.1° Distance Between Columns: 3340 mm Cutting Capacity: 13 mm ELGO P40T 5.7” Touch Screen NC Control Unit 5.7” TFT touch screen Manual operation mode Single-piece processing Program memory Up to 2A digital outputs Automatic blade gap, cutting angle, and pressure adjustment calculation based on material Automatic cutting program Back sheet support system RTS (Return To Sender) function Manual Blade Gap Adjustment System Programmable Back Gauge Retraction System Nodpfozbqyiex Ad Sjlc Automatic lifting for parts larger than 1000 mm CRONOSSTECH X-Axis Motorized NC Controlled Back Gauge X-axis travel distance: 1000 mm Speed: 150 mm/sec Accuracy: ±0.05 mm Steel body Hardened ball screw spindle Front Support Arms 1000 mm length Ruler T-slot Retractable stopper Retractable Front Finger Guard System (1000 mm) Upper Blade 2 cutting edges 450 N/mm² capacity Lower Blade 4 cutting edges 450 N/mm² capacity Foot Pedal with Emergency Stop Rear Safety System (EOS2E 2BX) 2 laser beams Type 2 – SIL1 safety level 510 mm monitoring height 3 ms response time IP65 / IP67 protection Shadow Light Cutting Line Ball Transfer Table Schneider or Siemens Electrical Equipment (400V / 50Hz) CRONOSSTECH Premium Front and Rear Guard Rexroth Hydraulic System Double-Speed Cutting System Energy-Saving Standby Mode Optional Features Automatic Blade Gap Adjustment System (ELGO P40T) Pneumatic Sheet Support System (Type 1 - Double Position) 1250 mm or 1500 mm X-axis back gauge 1500 / 2000 / 3000 mm front support arms Full-length retractable front guard system Technical Specifications Cutting Capacity (450 N/mm²): 13 mm Cutting Capacity (700 N/mm²): 8 mm Cutting Length: 3100 mm Cutting Angle: 2.1° Number of Pressure Cylinders: 14 Cutting Speed / Fast Mode: 9 / 14 hpm Distance Between Columns: 3340 mm Table Height: 880 mm Table Width: 620 mm Throat Depth: 250 mm Back Gauge Travel (X-Axis): 1000 mm Machine Length: 4860 mm Machine Width: 3585 mm Machine Height: 2300 mm Oil Tank Capacity: 265 L Motor Power: 22 kW Machine Weight: 11.5 tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷