Used Dc Drive Motor for sale (39,772)

Condition: used, Drive motor, DC servo motor LENZE type GFQUBT 112-22 Spindle motor, electric motor Serial no. Kdedpoqv I S Sefx Ahvoi 0239398K Year of construction: 1993 Rated power: 6 kW Operating voltage: 400 DC Rated current: 18 amps Maximum speed: 1000 rpm Excitation voltage: 210 VDC Excitation current: 3.4 amps Shaft diameter: 38 mm (shaft with 10 mm feather key) Shaft length: approx. 76 mm (shaft projection from centering edge) Centering flange diameter: 230 mm Bolt circle diameter: 264 mm, 4x 14 mm holes Longlife speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Speed max. 9000 rpm External fan LENZE type GSD 160 Mains connection: 400 V, 50 Hz. 0.32 kW Overall length: 830 mm (without shaft and centering flange) Overall dimensions L x W x H: 920 x 300 x 460 mm Own weight: 130 kg good condition

Condition: used, Drive motor, DC servo motor LENZE type GFQBT 80-24 Spindle motor, electric motor, main spindle motor Serial no. 184592 Year of construction: 1993 Rated power: 4.2 kW Kdjdetpkx Njpfx Ahvei Operating voltage: 260 V DC Rated current: 20 amps Maximum speed: 3000 rpm Excitation voltage: 200 V DC Excitation current: 1.15 amps - Electric brake Shaft diameter: 24 mm (shaft with 8 mm feather key) Shaft length: approx. 47 mm (shaft protrusion from centering edge) Centering flange diameter: 110 mm Bolt circle diameter: 130 mm, 8 x M8 thread - Encoder, speedometer, GBR 190V Longlife speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Output current: 67 mA (max. 200 mA) Speed max. 9000 rpm External fan LENZE (EBM) type G2E 120 Mains connection: 230 V, 50 Hz, 0.32 A, 0.075 kW Overall length: 630 mm (without shaft and centering flange) Overall dimensions L x W x H: 690 x 340 x 430 mm Weight: 45 kg good condition

Condition: good (used), Year of construction: 2020, Servo motor, electric motor, DC motor, stepper motor, compact asynchronous motor -Manufacturer: SEW Eurodrive, DC geared motor type ECG-A2M-09-A-K0 -Voltage: 24V -Translation: 9 -Shaft: Ø 16 x 25 mm -Technical data: see photo of the nameplate Kdodpsxw Tvwsfx Ahvsi -Quantity: 42x motors available -Price: per piece -Dimensions: 230/50/H50 mm -Weight: 1.3 kg/pc.

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Kessler, DC motor -Type: M30/36/2 Kdjdpsgiqh Refx Ahvji -Max. Speed: 3045 rpm -Power: 7.5 kW -Voltage: 170/400 V see photo nameplate -Shaft: Ø 28 x 60 mm -Construction: B3 -Dimensions: 585/290/H340 mm -Weight: 115 kg

Condition: used, Year of construction: 2018, operating hours: 625 h, 2018 | Genie TZ-50 DC w/Drive (17m) | Used Trailer-Mounted Boom Lift | 625 hours 📍Location: Latvia Ksdpfx Asycy Dgjhvjdi 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 22000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 34 inspection points 34 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Rust on trailer , all functions operate 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38155 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2017, operating hours: 921 h, 2017 | Genie TZ-50 DC w/ Drive 17.09 m | Used Trailer-Mounted Boom Lift | 921 hours 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 17900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 23 inspection points 23 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Considering the age of the machin everything works as it should 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38151 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Kdjdpfx Aeyf Dxyjhvsi

Condition: used, Year of construction: 2020, operating hours: 262 h, machine/vehicle number: Z45EM268, fuel type: diesel, Weights Empty weight: 6.563 kg Functional Mast: articulated arm Lifting capacity: 300 kg Working height: 1.600 cm Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Max. horizontal reach: 700 m Transport dimensions (LxWxH): 6.11x2.29x2.29 Kdsdpfx Ahjyrxbpevei Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), For sale: Industrial electric motor with DC electromagnetic brake. Kdsdpfx Ahjyridbevji Complete drive unit suitable for use in industrial machinery, overhead cranes, hoists, conveyors, and other equipment where shaft stoppage is required immediately upon power disconnection. The motor has been removed from industrial machinery. Visual condition is very good – standard signs of use, technically flawless. The electromagnetic brake ensures instant shaft stop and locking, a feature commonly used in drives requiring a high level of safety. Technical details: Motor manufacturer: Cantoni Motor type: 3-phase Power: 5.5 kW Voltage: 400 V Frequency: 50 Hz Speed: approx. 950 rpm Protection class: IP55 Insulation class: F Brake: DC (direct current) Braking torque: 150 Nm Brake supply: 180 V / 75 W Year of manufacture: 2018 Made in the EU PRICE IS PER PIECE.

Condition: used, DC main spindle drive, converter unit with digital control Simoreg V55 Spindle module, drive controller, rectifier, DC controller Manufacturer: SIEMENS Type: SIMODRIVE 6RA2725-6DV55-0 D380/60 Mreq-GdG6V55-3A0 Version: V55 basic unit Input voltage: 3 AC 380 V Input frequency: 50 / 60 Hz Input current: 49 A Output voltage: 380 VDC Output current: 60 A Rated power: 22 kW Dimensions (W x H x D): 270 x 260 x 290 mm Kdedpfjh D Syrex Ahvsi Weight: approx. 25 kg The drive controller is still operational in a Gildemeister GDM42. The matching drive motor can be found under stock number 60347. Further components from the Gildemeister can be found under stock numbers: 60346, 60347, 60348

Condition: used, Permanent magnet DC servo motor SIEMENS Type: 1 HU3074-0AC01-Z NO.B J157 1047 01 008 Voltage = 167 Volt DC = direct voltage Power = 1.8 kW Current consumption = 12.5 amps Speed = n. max.: 2000 rpm Kdodpfx Ahsuch N Isvji Rated torque = Mo 7 Nm Shaft diameter 24 mm Stub shaft length 50 mm Centering diameter 130 mm Bolt circle diameter 165 mm / 4 x 11 mm holes - Shaft with 8 mm keyway Housing dimensions L/W/H 335 x 140 x 145 mm Weight: 23 kg good condition

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Ksdpsptlblefx Ahvsdi Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 with impeller for crane rail 2 pieces available, price per piece

Condition: ready for operation (used), Year of construction: 2022, Two brand new and unused Lenze gear motors are available. 1) Lenze GSS06-2, Power: 5kW, Speed: 1450rpm, Torque: 445Nm, Ratio: 20:1, Efficiency: IE3, Duty type: S1, Insulation class: F. 2) Lenze GSS06-2M VAR 112C22, Power: 4kW, Speed: 1450rpm, Torque: 444Nm, Ratio: 20:1, Efficiency: IE2, Duty type: S1, Insulation class: F. Documentation available. An on-site inspection is possible. Kedpfxoynluze Ahvedi

Condition: used, Linear guide, portal axis SCHNEIDER ELECTRIC / FESTO Electric slide Motor type: ILS1B571PC1A0 Kdedjw Uc Tzepfx Ahvoi Year of manufacture: 2010 Axis travel: 300 mm Power supply: 36 Volt (DC) Carriage: 86 x 54 mm - Synchronous servo motor / stepper motor SCHNEIDER ELECTRIC, type: ILS1B571PC1A0 - Linear guide FESTO, type EGSK-33-300-6P - Ball screw Ø 10 mm, pitch 6 mm - 2 adjustable position sensors Dimensions L x W x H: 580 x 120 x 57 mm Weight: 6.5 kg in good condition

Condition: good (used), Year of construction: 2020, Gear motor - Nord Drivesystems - 0.75kW - 4rpm - Type SK 9043.1VF-80LP/4 - 2020 -Weight 160kg Kedpfx Ahov Uh S Esvsdi - Price per 1 pc.

Condition: good (used), Year of construction: 2021, DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer of gearbox: Nord., type 1SI50F F i =15 -Speed: 200 rpm -Engine manufacturer: B&R Type 8LVA23.R0030D100-0 -Voltage: 57 V Ksdpfxoyh Uhue Ahvodi -Shaft: Ø 20 x 25 mm -Dimensions: 275/140/H175 mm -Weight: 7.2 kg

Year of construction: 2012, condition: like new (used), MV.055.656/03 M10 Drive Motor for Suprasetter A52/A75, (new model >2009) second-hand, tested Kedpfx Aeinuyxohvjdi

Condition: good (used), Year of construction: 2021, DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer of gearbox: Nord., type 1SI50F F i =15 Kdodpfx Ahjyh Ai Tovji -Speed: 200 rpm -Engine manufacturer: B&R Type 8LVA23.R0030D100-0 -Voltage: 57 V -Shaft: Ø 25 x 50 mm -Dimensions: 275/200/H170 mm -Weight: 7.5 kg

Condition: used, electrical drives: Siemens Simoreg DC converter SIEMENS Simoreg 6RA7025-6FV62-0 DC electric drive, digital automatic control (converter) nominal power, kW 28.8 Input: 3AC 460V - 50A 50/60HZ Output(DC Rating): DC+-480V 60A Output(US Rating): DC+-500V 30A Field Supply: Input: 2AC 460V 10A 50/60Hz Output: DC 375V 10A Kjdpfx Ahodl Anbevedi

Condition: excellent (used), rotational speed (max.): 55 rpm, type of input current: three-phase, Geared motor, drive motor wiht brake several pieces for sale from stock. Manufacturer electric motor ziehl abegg RFZU180 Manufacturer Gear Sew-eurodrive S92 LP180 Output 1.42 / 8.5 kw Ksdpfx Ahsdyd Nxevsdi Speed 8/55 brake - Bevel gear Protection IP 23 -Weight 350kg Purchase, Acquisition, asset management of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: good (used), Used Eurotherm Drives 590 Digital 150HP /110KW DC Drive. Eurotherm Drives 590 Digital series Model: Supply Voltage: 500 VAC, 222AMPS, 3 PH, 50/60 Hz Kdjdpfx Ajdl Amzshvsi Output Rating: 150HP Armature Output: 460 VDC, 270AMPS Field Supply Volts: 500 VAC, 1PH Field Output Current: 10 AMPS DC Auxiliary Supply: 115 VAC, 1PH, 4 AMPS

Condition: used, Year of construction: 2021, operating hours: 220 h, machine/vehicle number: Z45EM-544, Drivetrain Type of fuel: LPG Weights Empty weight: 6.567 kg Kdedpfx Ahsxlx Nxsvei Functional Mast: articulated arm Lifting capacity: 300 kg Working height: 1.600 cm Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Max. horizontal reach: 700 m Transport dimensions (LxWxH): 6.11x2.29x2.29 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2019, operating hours: 150 h, machine/vehicle number: GS30MD-1147, Drive: Wheel Empty weight: 893 kg Kjdpfx Ahetr Nbmevsdi Lifting capacity: 227 kg Working height: 590 cm Transport dimensions (LxWxH): 1.41x0.78x1.68 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2020, operating hours: 53 h, machine/vehicle number: GS30MD-3935, Drive: Wheel Empty weight: 893 kg Ksdjtr Ncnepfx Ahvsdi Lifting capacity: 227 kg Working height: 590 cm Transport dimensions (LxWxH): 1.41x0.78x1.68 Please contact PFEIFER GROUP for more information

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Ksdpexddwrefx Ahvsdi Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: used, DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor Kdodpfxjtrzphe Ahvji -Manufacturer: SEM, DC gear motor -Type: DPM30E4 -Voltage: 36 V -Speed: 70 rpm -technical data: see photo type plate -Shaft: Ø 30 x 50 mm -Dimensions: 430/150/H130mm -Weight: 14.3 kg