Used Crane Portal for sale (6,286)

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19552 Specifications: Lifting capacity: 2.5 tons Span: 18 meters Remote control Ready for delivery Description:Munck overhead crane for sale.According to the owner, it has seen very little use since it was purchased in 2018.Equipped with remote control and a 2.5-ton capacity.Available for prompt delivery. Kdodpfx Ajvyf Uzsh Neg Own weight: 4000 Model: Traverskran

Condition: used, machine/vehicle number: YV2R0P0D5NA88xxxx, mileage: 330,000 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 22080 Kdedjx Izq Tspfx Ah Nog Specifications: EU-approved until 18.11.2026 Model year: 2021 Mileage: 330,000 km (may increase slightly) Automatic transmission Crawler gear Euro 6 Bergfegen body from 2016, ExTe A9 2.8 m Aluminum rims Length: 1,070 cm Width: 255 cm Wheelbase: 460 cm Curb weight: 15,960 kg Drivetrain: 6x4 Power: 751 hp LED light bar Sleeper cab Radio/CD Climate control / A/C Crane specifications: Model year: 2019 Epsilon M12 Electric control with mini joysticks Water heater Reach: 8.3 meters Description: 2021 Volvo FH16 750 timber truck.The truck is recently EU-approved and currently in daily operation, so mileage may increase slightly.Equipped with a Bergfegen body from 2016 and an Epsilon M12 crane from 2019.Available for delivery on short notice. Km: 330000 HK: 750 Technical approved: Yes EU-approved until: 18.11.2026 Own weight: 15960 Total Weight: 32000 Payload: 15965 Width: 255 Length: 1070 Euro: 6 Model: FH16 750 6x4 Tømmerbil m/ Epsilon M12 kran Gearbox: Automatic

Condition: used, machine/vehicle number: YV2J4DAC72A54xxxx, mileage: 540,000 km, Year of construction: 2001, Please contact ATS Norway for more information Please provide reference number upon request: 21881 Specifications: EU-approved until 06.06.2026 Mileage: 540,000 km Transmission: Manual Engine brake 6x2 Good tyres Full air suspension Rear support legs Platform length: approx. 6 m Palfinger PK 23002 (2006 model) Remote control Front and rear support legs Euro 3 Side boards included Sleeper bunk Radio/CD Climate control/AC Service done by owner Video available Ready for delivery Description:Volvo FM12 crane truck from 2001, equipped with a 23 t/m Palfinger crane from 2006.The truck is EU-approved and ready for delivery. Service and maintenance have been performed by the owner. Km: 540000 HK: 420 Technical approved: Yes EU-approved until: 06.06.2026 Own weight: 9540 Total Weight: 27000 Payload: 17385 Width: 255 Kdedpjxy Etajfx Ah Nog Length: 960 Euro: 3 Model: FM12 6x2 Kranbil m/ 23 t/m Palfinger kran Gearbox: Manual

Condition: used, machine/vehicle number: ZCFA75B020248xxxx, mileage: 401,000 km, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 20395 Specifications: Km: Approx. 401,000 Transmission: Manual Tires (see pictures) 4x2 Winch Length of plane: Approx. 4.8 m Kdsdewi Ryaopfx Ah Njg 150 hp Palfinger PK5200 crane from 1991 Crane diagram 3 seats Radio/CD Air conditioning/AC Service is done by owner Ready for delivery Description:Iveco 75E15 crane truck with winch.The truck is EU approved and from 2006.5.2 t/m Palfinger crane from 1991. Km: 401000 HK: 149 Technical approved: Yes EU-approved until: 11.02.2026 Own weight: 5530 Total Weight: 7490 Payload: 1885 Width: 245 Length: 798 Euro: 3 Gearbox: Manual

Condition: used, machine/vehicle number: YS2G8X2000571xxxx, mileage: 24,226 km, Year of construction: 2024, Please contact ATS Norway for more information Kdedpjxlbb Djfx Ah Nog Please provide reference number upon request: 21494 Car specifications: 2024 model 24,226 km First registered: 06.12.24 560 hp Automatic transmission Euro 6 8x2 2 hydraulic boat supports L ft on 2 and 4 axle Suspension: Full air Onspot Heating in the house Hydraulic extension of 1 meter on level Tool cabinet Air conditioning/ac Radio Light Extra light Ready for delivery   Crane specifications: 2023 HMF crane Certified to: 07/25 50 hours/month 6 Hydraulic extensions on main crane 5 Hydraulic jibs Extra hydraulics all the way forward 4 support legs 20 t front leg 100% Load 360 Remote control Range of 21.4 meters Ready for delivery   Description: We have a powerful and well-maintained crane truck for sale - a 2024 Scania G560 8x2 pusher crane truck w/ onspot, 2023 50t/m HMF crane w/ extra hydraulics and jib. Both the truck and the crane function as they should, according to the owner. This is a rough skin of a crane truck. The vehicle is well maintained and is fully equipped for demanding missions. The car can be delivered by arrangement. Km: 24226 HK: 560 Technical approved: Yes EU-approved until: 06.12.2026 Own weight: 21300 Euro: 6 Model: G560 Gearbox: Automatic

Condition: used, machine/vehicle number: XLRAE45GF0L41xxxx, mileage: 180,000 km, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 21713 Specifications: Km: Approx. 180,000 Gearbox: Automatic Good tires On Spot Euro 5, 224 hp Platform length: Approx. 5 meters Width: Approx. 2.3 m 2 sets of wheels with tires Ksdjxu Aw Eopfx Ah Nsdg Engine brake 4x2 Toolbox Fassi F105 crane Remote control Crane diagram Reach: 12 meters hydraulic Support legs Rotating beacon Services performed at local workshop Video Ready for delivery Description:DAF crane truck from 2012.The truck is EU-approved and ready for delivery.Equipped with a Fassi F105 crane.Only 180,000 km. Km: 180000 HK: 224 Technical approved: Yes EU-approved until: 25.02.2026 Own weight: 6820 Total Weight: 12000 Payload: 5105 Width: 240 Length: 800 Euro: 5 Model: 2012 DAF Fa 45.220 Kranbil. Gearbox: Automatic

Condition: used, machine/vehicle number: YS2R8X4000214xxxx, mileage: 330,000 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 21741 Specifications: Km: Approx. 330,000 Gearbox: Automatic Full air suspension Retarder 8x4 with steering on axle 4 Euro 6, 581 hp JOAB body 24T hook lift with bend Crane hydraulics Only 1 driver since new Tow hitch VBG Underrun protection Extra lights will be installed before sale Truck freshly repainted, original color was white Good tires Remote control Bed Refrigerator Radio/CD Climate control/AC Under gold service agreement Video Ready for delivery Description:Scania R580 Tridem hook lift truck, freshly repainted.Equipped with a JOAB body featuring a 24T hook lift with bend.Truck also fitted with crane hydraulics.Has been and is still under gold maintenance agreement.Ready for delivery. Km: 330000 HK: 580 Technical approved: no EU-approved until: 31.10.2024 Own weight: 12500 Total Weight: 33000 Payload: 20425 Kdodpfx Ahsxu Ayae Nog Width: 255 Length: 874,6 Euro: 6 Model: 2018 Scania R580 Tridem Krokbil m/ Kranhydraulikk. Nylakkert! Gearbox: Automatic

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: 2021 model 7350 km (will go a little) 721 Engine hours 241 Crane hours Euro 6 engine 8x2 551 HP Suspension on 1st and 2nd axle: Steel Suspension on 3rd and 4th axle: air 2 x 110 liter variable pumps 2 x manual extensions for main boom and 2 x for jib Scanreco optical remote control (Top model) Weight cell main boom Additional function for main boom and jib Auto leveling (The car puts itself in a level position ready for lifting.) Virtual space (Possibility to limit all axes with a few keystrokes, no need to open a workshop for this. Brilliant when working under high voltage etc.) SKF central lubrication ring and up to the first link Extra function all the way up the jib Single winch hook (Jib / main boom) 2 shear winch hooks (Jib / main boom) Kdedpfxowphixj Ah Nog 4-point winch hook (Main boom) Hook for jib Hook for main boom (Large hook) N d lower the generator (24 volts) Cable stop sensor and sleeve 4 ton winch Diagnostic cable for online help (Remote help) Danfoss valve center 2 x 2 ton counterweight (M is only used for cranes above the cabin, otherwise the counterweights are not needed, and these can be removed as needed) Front support leg   Structure: 4 x work lights strategically placed inside each outrigger cabinet. 50" LED bar work light at the rear of the cab Powerful LED lights in the crane. VBG mount, with air servo control unit mounted in rear cabinet left side. Roof rack 2 high beam LED bar on roof forward (daylight!!). Orange work warning LED beam on the roof. EasyUp foldable ladder with side railing. Boxes for chains, screws, etc. Mounted on the rear support legs so that they are extended together with the support legs and are also packed away while driving. Charger for control in cabin Plastic inner fenders axle 3 and 4. 3 edge pull-out cabinet between axles 3 and 4 On the left side between axles 2 and 3, a large cupboard with a 500 W fan heater is installed for hanging clothes to dry, etc. Flat / bottom rear closed with alloxed aluminum door panels that are cut to fit the car perfectly, with rounded edges for a very professional look. CNC manufactured plates up the back of the cabin. Fully painted sides, cabin and stern. Crane rest cradle for operation without jib. 5 pcs support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cribs at the back of the "plan" Right side large cabinet 1.2 x 1 meter Powerful LED reversing/rear work lights. The rear of the car was rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. Hatches strategically placed for access to relevant facilities under the building. Precisely cut out panels in side...

Condition: used, machine/vehicle number: YV2XTY0C3JA83xxxx, mileage: 201,689 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 21480 Car specifications: 2018 model 201,689 km PTO Hours: 1862 I-shift 469 hp Euro 6 6x2 Lift and swing on 3 axles Tires (see pictures) Internal length plan: 6,368 m Internal width plan: 2.491 m Stakes not included Pallet forks not included New towbar (2024) Chassis treatment Services taken in-house at your own workshop Air conditioning/ac Radio Light Ready for delivery   Crane specifications: 2018 model 2620K-RC HMF crane 26 hours/month Certified to: 03/26 6 hydraulic extensions 1 Manual Remote control 17 m range Ready for delivery   Description: Kdsdpfexkt Iysx Ah Njg We have a 2018 Volvo FM460 6x2 Crane truck w/ 2018 26t/m HMF crane for sale. The car is in daily use and the mileage will increase slightly. Everything works as it should according to the owner. However, errors and defects may occur as the car is from 2018. All services have been carried out at the owner's own workshop. The car has little rust and has been underbody treated. The trailer in the picture can be included if desired for an additional price. Ready for delivery. Km: 201689 HK: 469 Technical approved: Yes EU-approved until: 31.08.2026 Own weight: 14400 Euro: 6 Model: FM460 6x2 Kranbil m/ 2018 26t/m HMF kran

Condition: used, machine/vehicle number: YY9PV20KT7P01xxxx, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 20843 2017 Nor-Slep 2-axle hooklift trailer with tipping function Currently banned from use (not EU-approved) Extendable drawbar Various extra lights Air suspension BP axles Total length: 910.4 cm Width: 255 cm Axle distance: 182 cm Tires in acceptable condition Kdsdpfxowvzakj Ah Njg   One CMT hooklift container from 2016, each 13.5 m³ Technical approved: no EU-approved until: 27.04.2025 Own weight: 4350 Model: 2 akslet krokhenger med tipp

Condition: used, machine/vehicle number: YS2P6X2000219xxxx, Year of construction: 2023, Please contact ATS Norway for more information Please provide reference number upon request: 20948 Kdodswx D T Ejpfx Ah Neg Specifications: Km: Approx. 90,000 (will increase) Transmission: Automatic Full air suspension Euro 6, 411 hp Decent tires 6x2 with steering on 3rd axle Retarder ECO-807E.R2 crane Wireless remote control Reach: 7 meters ROS ROCA body 1 chamber Volume: 21 m³ Toolbox Refrigerator Reversing camera Radio/CD Climate/AC Serviced at local workshop Ready for delivery Description:2023 Scania P410 single-chamber truck with only 90,000 km.The truck is in daily operation, so mileage will increase.Equipped with ECO-807E.R2 crane with a reach of 7 meters.Ready for delivery. HK: 410 Technical approved: Yes EU-approved until: 14.03.2026 Own weight: 18130 Total Weight: 29000 Width: 250 Length: 965 Euro: 6 Model: P410 Gearbox: Automatic

Condition: used, machine/vehicle number: YV2RT60GXLA85xxxx, mileage: 151,000 km, Year of construction: 2022, Please contact ATS Norway for more information Please provide reference number upon request: 21593 Kdodoxp Amcopfx Ah Nsg Specifications – truck: Mileage: Approx. 151,000 km Transmission: Automatic Full air suspension Engine brake / retarder 8x4 with steering on 4th axle Euro 6, 551 hp 100% front outrigger Flatbed length: approx. 5.8 meters Extension: 50 cm Total length with extension: 6.3 m Boat supports Combo truck – flatbed and fifth wheel included Webasto heater in top cabinet Tow hitch Post rack VBG coupling Remote control for both crane and truck Truck is remote-controlled Includes 2 short sideboards Metalized superstructure Rear support legs Toolboxes Microwave in external cabinet Lightbar (rotating) Camera system License plate box in front Bed Fridge Radio/CD Climate control / AC Full service contract (Gold agreement) Specifications – crane: Fassi F545RA from 2020 Certified until 08.2026 Support legs Remote control Reach: 28.2 meters Jib Winch Load chart 6 + 6 + 1 extensions Description:Volvo FH540 Tridem combo truck from 2022.The vehicle has been under a full (Gold) service contract since new.Sold with flatbed and fifth wheel.Equipped...

Condition: used, machine/vehicle number: ZN3D070D70904xxxx, mileage: 150,000 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 21965 Specifications: - Eu-approved until 06.05.2026 - Km: Approx. 150,000 (may increase) - Transmission: Automatic - 4x4 - Engine brake - Length plan: 4.26 m - Trailer hitch - Palfinger PK7.501 SLD C crane - Remote control - Crane diagram - Crane reach: 11 meters hydraulic - Approved until 07.26 - Tool cabinet - Euro 6, 180 hp - Good tires - Radio/CD - Air conditioning/AC - Service agreement with Iveco - Delivery by agreement Description: Kodpsx A R Nrofx Ah Nodg Iveco Crane truck with four-wheel drive. The truck is equipped with a 7.5 t/m Palfinger crane. Both truck and crane are approved. delivery by agreement. Km: 150000 HK: 180 Technical approved: Yes EU-approved until: 06.05.2026 Own weight: 5130 Total Weight: 7000 Payload: 1795 Width: 230 Length: 750 Euro: 6 Model: 70W 4x4 Kranbil m/ Palfinger PK7.501 Gearbox: Automatic

Condition: used, machine/vehicle number: YS2P6X2000211xxxx, mileage: 270,000 km, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 21968 Specifications: - Eu-approved until 24.09.2026 Kdsdsx A R Tdspfx Ah Nsg - Km: Approx. 270,000 - Transmission: Automatic - Full air suspension - Swing on 3 - Tires (see pictures) - 6x2 - NTM Body, 21.7 m3 - 1 chamber - Crane - Remote control - LPG truck - Euro 6, 344 hp - Botek Printer - Weight - Rear view camera - Radio/CD - Air conditioning/AC - Gold agreement with Scania - Ready for delivery Description: Good used Scania Renovation truck from 2015. The car runs on LPG and is equipped with a crane. 1 chamber NTM body. It is Eu-approved and has a gold agreement with Scania. Ready for delivery. Km: 270000 HK: 344 Technical approved: Yes EU-approved until: 24.09.2026 Own weight: 17100 Total Weight: 27000 Payload: 9825 Width: 255 Length: 920 Euro: 6 Model: P340

Condition: used, machine/vehicle number: YV2RT60G3JA83xxxx, mileage: 136,000 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 19582 Truck specifications: - Km: Approx. 136,000 - Transmission: Automatic - Suspension: Steel - Air - 10 ton front axle - Retarder - Euro 6 - Okay tires - Extraction - Length of plane: Approx. 6.5 m - 8x4 - Trailer hitch - VBG - Hydraulic underrun barrier - 551 HP - Turn on 4 - Support legs - Tool cabinet - Bed - Radio/CD - Air conditioning/AC - Silver agreement with Volvo since new (still going on) Crane specifications: - 2018 HMF 5020K - Hour meter PTO: Approx. 3320 - Support legs - Approved until 10.2026 - FJ-1000 Jib - Crane diagram - 6 5 hydraulic extensions - Videos Kodpfxsx Izrks Ah Nsdg Description: Well-maintained Volvo FH540 Tridem crane truck from 2019. The truck is equipped with a 50 t/m HMF crane with Jib. Only 136,000 km and 3320 PTO hours. It has been under a lease agreement since new and is still going strong. Ready for delivery. Km: 136000 HK: 550 Technical approved: Yes EU-approved until: 12.04.2026 Own weight: 20870 Total Weight: 37000 Year controlled until: 10.25 Payload: 16055 Width: 255 Length: 1046,3 Euro: 6 Model: 2019 Volvo FH540 8x4 Tridem Kranbil m/ 50 t/m HMF kran m/ Jibb. Lite km og krantimer! Gearbox: Automatic

Condition: used, machine/vehicle number: YV2XZX0C9JA82xxxx, mileage: 196,000 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 21687 Truck specifications: Km: 194,000 Kdjdpfxsxr Tvms Ah Neg Gearbox: I-Shift Full air suspension Euro 6, 460 hp 3-step Volvo engine brake Maintained under Volvo service contract Platform length: 6.5 m 2-ton liftgate, Zepro with remote control Tow hitch VBG coupling Lift bogie with steering Toolboxes on both sides Side boards Rotating beacon bar Extra lights Sleeper bunk Good tires Radio/CD Climate control / AC Crane specifications: HMF 2120 from 2017 Crane hours: approx. 1300 Crane diagram Reach: 17.1 meters Max lifting capacity: 3820 kg Remote control Support legs 3rd function on crane / extra hydraulic outlet for tools in the hook Description:Well-maintained Volvo FM450 crane truck from 2018.The truck is equipped with a 21 t/m HMF crane and a 2-ton liftgate.Remote control for both crane and liftgate.Ready for delivery. Km: 196000 HK: 459 Technical approved: Yes EU-approved until: 17.10.2026 Own weight: 14555 Total Weight: 28000 Payload: 13370 Width: 255 Length: 1000 Euro: 6 Model: FM450 Kranbil m/ 21 t/m HMF kran og Løftelem. 194 000 km!

Condition: used, machine/vehicle number: VF611J160GD00xxxx, mileage: 450,000 km, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21660 Specifications:• Km: 450,000• Transmission: Automatic• Suspension: Steel front, air rear• Euro 6, 388 hp• Engine brake• Platform length: Approx. 6 meters• 4x2• Tow hitch• Clutch and catalytic converter replaced around July 2024• Palfinger PK 19.001 SLD• Delivered fully certified• Reach: 14.5 meters• Crane hours: 1,150• Crane diagram• Remote control• Support legs• Rotating beacon bar• Tires (see pictures)• Bed• Serviced twice a year• Radio/CD• Climate control / AC• Ready for delivery Description:Renault T380 6x2 crane truck from 2016.Both truck and crane are delivered with new approval.Equipped with a 19 t/m Palfinger crane.Serviced twice a year. Kdsdpjxq Dbqefx Ah Njg Km: 450000 HK: 387 Technical approved: Yes EU-approved until: 11.08.2026 Own weight: 11890 Total Weight: 22000 Payload: 10035 Width: 255 Length: 952 Euro: 6 Model: Renault T380 6x2 Kranbil m/ 19 t/m Palfinger Gearbox: Automatic

Condition: used, operating hours: 4,500 h, Serial number: 30xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21752 Specifications: Kdsdsxvlc Tspfx Ah Nsg Hours: approx. 4500 Capacity: 20 tons Winch Tires (see pictures) Outriggers New batteries Description:Kato KR-20 mobile crane with approximately 4500 hours.The crane is functional but no longer certified (last certified 11/2023).20-ton capacity.There is a contact fault in the horn, so it does not make a sound when the crane is extended.Can be delivered at short notice. Hours: 4500 Own weight: Model: Kato KR-20 Mobilkran SE VIDEO -

Condition: used, Year of construction: 2019, operating hours: 2,000 h, Please contact ATS Norway for more information Please provide reference number upon request: 21753 Specifications: Kdedpfoxvlh Njx Ah Nsg Model year: 2019 Hours: approx. 2000 Base ballast Remote control Counterweights: 3 × 3600 kg and 6 × 1100 kg Hook height: 30 m (3 × 10 m sections) Jib length: 55 m Undercarriage: stationary on ZD4230 Hoisting winch: 25LVF 15 Optima Trolley winch: 6 DVF 4 Optima Slewing mechanism: RVF 152 Optima+ Last assembled: 2022 Without cab Hours: 2000 Own weight: 111 Model: MDT 109 2C Tårnkran

Condition: used, Year of construction: 2019, operating hours: 340 h, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 21806 Kdsdjxw Nlhepfx Ah Njg Specifications: Delivered certified Model year: 2019 Hours: 340 Boom length: 30.7 metres Hook height: 29.8 metres Lifting capacity: 1500 kg 1 extension Crane diagram Remote control Description:Klaas trailer crane with a hook height of 30 metres.It has only 340 operating hours and will be delivered certified.Can be delivered at short notice. Hours: 340 Own weight: 1 Model: K21-30 Byggekran. 340 timer!

Condition: used, machine/vehicle number: YS2P6X2000200xxxx, mileage: 820,000 km, Year of construction: 2005, Please contact ATS Norway for more information Please provide reference number upon request: 21454 Specifications: EU-approved until 30.07.2026 2005 model Approx. 820,000 km Manual gearbox Tires (see pictures) 20T hooklift Palfinger 23 t/m crane from 1999 Support legs Length: 900 cm Width: 250 cm Wheelbase: 490 / 134 cm Curb weight: 15,550 kg 6x2 340 hp Rotating warning bar Tow hitch Rearview camera Kdsdpfx Asxg Abnjh Nsg Radio/CD Air conditioning Description:Scania P340 hooklift/crane truck from 2005.Equipped with a Palfinger 23 t/m crane from 1999. The main cylinder has a leak.Flatbed and container can be included at an additional cost.Service history available.Available for prompt delivery. Km: 820000 HK: 340 Technical approved: Yes EU-approved until: 30.07.2026 Own weight: 15550 Total Weight: 29000 Payload: 13375 Width: 250 Length: 900 Euro: 3 Model: P340 Krok/kranbil 23 t/m Palfinger kran Gearbox: Manual

Condition: used, machine/vehicle number: YS2P6X2000556xxxx, mileage: 150,000 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21679 Specifications: EU approved until 21.11.2025 Kdedjxr Tw Djpfx Ah Nog Model year: 2019 Mileage: approx. 150,000 km Opticruise Tires (see pictures) 2019 Joab body Remote control for body Autoline C50 sand spreaders Fuel type: Gas Euro 6 Length: 874 cm Width: 255 cm Wheelbase: 435/135 cm Curb weight: 14,200 kg Max payload: 13,725 kg 6x2 340 hp Rear-view camera LED bar Bed Radio/CD Climate control/AC Description:Scania P340 6x2 skip loader from 2019.Equipped with Joab body with space for two containers.Regularly serviced.Delivery by agreement.See video! Km: 150000 HK: 340 Technical approved: Yes EU-approved until: 21.11.2026 Own weight: 14200 Total Weight: 28000 Payload: 13725 Width: 255 Length: 874,2 Euro: 6 Model: P340 6x2 Liftdumper m/ Joab påbygg SE VIDEO Gearbox: Automatic

Condition: used, machine/vehicle number: 50xxxx, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 18255 Specifications Gantry crane: Model year: 2016 Type: Gantry crane for railway Rail type: A100 Height to main hook: 11.9 metres Lifting capacity: 4 x 10 tons Total weight: approximately 131,865 kg Span length: 5.5 + 31 + 8 meters Kedpfx Ahovg Rkhj Njdg Delivery: Ready for delivery at short notice Description: Powerful Gantry crane from 2016 , previously used in a railway context, for sale.The crane has four hooks with a capacity of 10 tons each , and is ideal for heavy lifting and precise handling of large items. The crane is delivered fully loaded on a truck , ready for transport. Shipping costs are additional.Can be delivered quickly by arrangement. Total Weight: 131865

Condition: excellent (used), lifting height: 22,000 mm, Year of construction: 2019, operating hours: 3,354 h, Drivetrain Make of engine: Yanmar Weights Empty weight: 4.700 kg Functional Lifting capacity: 3.990 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Transport dimensions (LxWxH): 4,3x0,8x1,93 Latest inspection: 2025-02-14 Kdsdpfx Ahjxryrne Nsg Production country: NL Additional information Please contact Vink Machinery for more information Hoeflon C10 * 2019 * Diesel and 380-volt drive * 3354 working hours * Fly jib * 4000kg winch * Non-marking tracks * Remote control * 22-meter hook height * 19.8-meter horizontal reach * Infinite slewing rotation * 3,990 kg lifting capacity * 4700 kg net weight * Inspection valid until February 2026 * Includes maintenance history

Condition: used, machine/vehicle number: YS2R6X2000553xxxx, mileage: 150,000 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 18545 Specifications: EU-approved for delivery Model year: 2019 Mileage: Approx. 160,000 km Transmission: Automatic Tires: See pictures Emissions: Euro 6 Flatbed length: Approx. 630 cm Total length: 1,096 cm Width: 255 cm Wheelbase: 475/135 cm Towbar: Yes Reversing camera: Yes Stabilizing legs: Yes Drive: 6x2 Engine power: 500 hp Bullbar: Yes LED bar: Yes Toolbox: Yes Bed: Yes Radio/CD: Yes Climate/AC: Yes Crane Specifications: Crane: Hiab 477E-7 Hipro from 2019 Certification: Delivered with new certification Kdodpfx Asvg Aivjh Neg Outreach: 7+6 Jib: Yes Crane diagram: Yes Remote control: Yes Description: 2019 Scania R500 6x2 crane truck with a Hiab 47 t/m crane and 7+6 outreach, equipped with a jib. Both the truck and crane come with new certification. The flatbed length is 630 cm. Quick delivery available. Km: 150000 HK: 500 Technical approved: Yes EU-approved until: 26.09.2026 Own weight: 20374 Total Weight: 30000 Payload: 9551 Width: 255 Length: 1096 Euro: 6 Model: R500 Gearbox: Automatic