Claas ares 826 rz for sale

Your location was not identified (Edit)
Enter your address
or
Move
4
ROLAND RZK 3B E Y.1988 Dwkdsq 2 Color Perfecting 1/1, 2/0 High pile Water Dampening Powder sprayer more
3
Tecna 9321 cable spring-loaded carrying capacity 2-4 kg, serial number according to the photo, included with com. used, normal wear, 100% functional, photos Ui7f97zm more
5

Double Column Drawing Press - Mechanical EITEL RZ400

St. Ingbert, GermanyGermany dealership location
18132 km
2000
used
ram pressure:400 Mp Pressure attenation:200 Mp Bdvhux93ht die cushion:60 Mp Drawing cushion:900 mm Ram stroke:30 mm die cushion stroke:200 mm Installation hight, ram and table:1400 mm Workspace table:1400 x 2000 mm Ram workingspace:1400 x 2000 mm Die cushion workspace:650 x 1500 mm Demand for oil:4000 L Connection value:270 kW voltage:380 V Shipping weight:52 to height:6600 mm width:2010 mm length:3900 mm working feed:60 mm/sec feed up:450 mm/sec feed down:500 mm/sec Year:Überholt 2000 1972 Se... more
0
Int. #: 3 Engine hours: 2060h Carrying capacity: About 567kg T3hspu02 Work height: max 9.90m Platform height: max 7.90m Platform height: min 1.20m Platform (LxB in m): 2.40 x 1.40 Platform extension: 1.50m Wheelbase: 2.0m Wenderadius exterior: 4,0m Wenderadius inside: 1.50m Lifting time (for nominal load): 36sek Ground clearance: 20cm Climbing ability: 50% All-wheel drive Drivable up to maximum height Engine: 3-cyl. Kubota Diesel Power: 17.9kW Driving speed at: 0.6km/h Driving speed max: 6.1km/... more
4

Folding machines HERZOG + HEYMANN KL 112

Espelkamp, GermanyGermany dealership location
17886 km
1994
ready for operation (used)
Folding work:-2 folding pockets-noise insulation device-overpass Be992lcmor more
4
Pressure total: 350 ton Stroke: 900 mm Daylight: 1.400 mm Table surface area : 2.000 x 1.400 mm Ram surface area: 2.000 x 1.400 mm Cushion capacity in table: 60 ton Cushion stroke: 200 mm Cushion area: 1.500 x 650 mm Approach speed: 500 mm / sec Working speed: 60 mm / sec Cxny0ff Return speed: 450 mm / sec Stroke: 6.600 mm Weight of machine approx.: 58 ton more
6

Folding machines and devices Heidelberg Falzmaschine TH 82-6-4-2

Murr, GermanyGermany dealership location
18001 km
2007
ready for operation (used)
Technical data: Round stack ingesis 1st station BUH 82 with 6 folding pockets 2. Station BUH 66 with 4 folding pockets Be9dukxvx2 3rd station BUH 56 with 2 folding pockets Desta Flat Stack IngeLAGE BAS FS more
2

Schwarz - Reaktoren Schwarz - Reactor

MA Barneveld, NetherlandsNetherlands dealership location
18075 km
used
Make Schwarz, No 10798/4, New 1996, Material Stainless steel 1.4571 (316Ti), Reactor (1x), Capacity 900 Ltr, Vessel sizes dia. 1000x790mm, Dished bottom , Dished top side , Manhole dia. 250mm, Top connections (5x), Outlet dia. 80mm + dia. 50mm, Working pressure vac/6 bar, Test pressure 7,8 bar, Half coil jacketed (18 Ltr), Working pressure 6 bar, Test pressure 7,8 bar, Max. temperature -10/+200 Degr. C., With paddle stirrer make Ekato, Motor 1,5 KW, 230/400 Volt (Ex), Floorspace 1,4x1,4 M, Total... more
6
sheet size: 520 x 360 mm. approx. 26 mio.imps. perfector 1+1 2+0, white model, Rolandmatic dampening, K7mdp quick clamps, powder spray more
0
Int. #: 2 Engine hours: 2255h Cnn3ltg0 Carrying capacity: About 567kg Work height: max 9.90m Platform height: max 7.90m Platform height: min 1.20m Platform (LxB in m): 2.40 x 1.40 Platform extension: 1.50m Wheelbase: 2.0m Wenderadius exterior: 4,0m Wenderadius inside: 1.50m Lifting time (for nominal load): 36sek Ground clearance: 20cm Climbing ability: 50% All-wheel drive Drivable up to maximum height Engine: 3-cyl. Kubota Diesel Power: 17.9kW Driving speed at: 0.6km/h Driving speed max: 6.1km/... more


claas ares...
daily

New machines via email!

Stay updated!
3

Folding machines HERZOG + HEYMANN 701

Espelkamp, GermanyGermany dealership location
17886 km
1994
ready for operation (used)
Stream delivery Be992utscs more
4

Kurzstangenlader Haas ServoBar 300

Bruchsal-Büchenau, GermanyGermany
18046 km
2007
excellent (used)
KURZSTANGENLADER HAAS SERVO BAR 300 - 27-03-012 Lieferzeit: sofort Nummer: 27-03-012 Hersteller: HAAS Typ: Servo Bar 300 MASCHINENDATEN Baujahr: ca. 2007 Ptyr2y L x B x H: ca. 2120 x 1400 x 1400 mm Gewicht: ca. 400 kg Sehr Guter Allgemeinzustand Be8wwvxu3p TECHNISCHE DATEN Steuerung: über CNC - Maschine Stangen - Durchmesser: ca. Ø 9,5 - 79 mm Stangenlänge: ca. 250 - 1520 mm Höhenverstellung: ca. 1230 - 1350 mm Stromversorgung: über Interface Max. Vorschubweg... more
6
Approx. 30 m Saeed R3000 shelving rack manufacturer: Saeed R3000 mint condition, see pictures. over 300 meters available Risers, galvanised, height 2.5 m, depth 40 cm Shelves, galvanized, weight 100 kg / box, box width ca. 100 cm Negotiating price: € 1.630,00 net ex warehouse Offer consists of: 31 St. riser or frame, 2.5 m, bright zinc-plated 90 St. shelves, capacity 100 kg / tray, galvanized 10 St. Cross associations for reinforcement. 3 levels per box (more charges ar... more
3
Budde roller foerderer, FB = 540 mm, FL = 2,000 mm Nnmc2 RA1163 Type: Roller-foerderer with king wave on rollers, swivel through piece Weight: 135 kg Foerder length: FL = 2,000 mm Foer width: FB = 540 mm Total width: 560 mm Foerder speed: v = 0.5 m/s Roller spacing: 75 mm Drive: SEW Power: 0.37 kW Voltage: 230/400 V Stuetzen: incl. stuetzen with steering wheels and locking rods more
2
Make Winkel Schweisstechnik (DE), Type "Stripper Filter", No WS-5162, New 2012, Candle filter , Filter surface 5,4 m2, Number of candles 27, Candle sizes 40", Liquid outlet DN80, Max. temperature -10/280 degr.C, Top connections DN25, Capacity 214 Ltr, Vessel sizes dia.450mm x1340mm, Without candles , Working pressure -1/6 Bar, Test pressure 10,5 Bar, Capacity 40m3/h, Mounted on legs , Floorspace 0,8x0,8 M, Total height 1,9 M, Weight 320 KG, Extra Specifications Atex IIG-IIC-T3 What you can expec... more
0
Int. #: 1 Engine hours: 2417h Carrying capacity: About 567kg Work height: max 9.90m Platform height: max 7.90m Platform height: min 1.20m Platform (LxB in m): 2.40 x 1.40 Platform extension: 1.50m Wheelbase: 2.0m Wenderadius exterior: 4,0m C7m3fsz Wenderadius inside: 1.50m Lifting time (for nominal load): 36sek Ground clearance: 20cm Climbing ability: 50% All-wheel drive Drivable up to maximum height Engine: 3-cyl. Kubota Diesel Power: 17.9kW Driving speed at: 0.6km/h Driving speed max: 6.1km/h... more
4

Folding machines HERZOG + HEYMANN 701

Espelkamp, GermanyGermany dealership location
17886 km
1998
ready for operation (used)
Dandruff display:-with counter Btvxr8n more
4

Kurzstangenlader Irco ILS-TBK 10012

Bruchsal-Büchenau, GermanyGermany
18046 km
1997
excellent (used)
KURZSTANGENLADER IRCO ILS-TBK 10012 - 27-03-002 Lieferzeit: sofort Nummer: 27-03-002 Hersteller: IRCO Typ: ILS - TBK 10012 MASCHINENDATEN Baujahr: ca. 1997 L x B x H: ca. 2000 x 1070 x 1700 mm Gewicht: ca. 450 kg Sehr Guter Allgemeinzustand TECHNISCHE DATEN Steuerung: über CNC - Maschine Stangen - Durchmesser: ca. Ø 5 - 72 mm Stangenlänge: ca. 600 - 1200 mm Bezgynsg8d Höhenverstellung: ca. 1200 - 1500 mm Be8wwmgpio Stromversorgung: ca. 380 & 230 Volt Max. ... more
6
Commission 20180509 Capacity 5000 kg Drive type mast lifting height 0 mm Height 0 mm Free hub 0 mm Forks 2000 mm Njjzz technically good visually well Bereifung_vorne rear tyres optional more
3
Budde roller foerderer, FB = 540 mm, FL = 2,000 mm Bfapn8bqw0 RA1162 Type: Roller-foerderer with king wave on rollers, swivel through piece Weight: 135 kg Foerder length: FL = 2,000 mm Foer width: FB = 540 mm Total width: 560 mm Foerder speed: v = 0.5 m/s Roller spacing: 75 mm Drive: SEW Power: 0.37 kW Voltage: 230/400 V Stuetzen: incl. stuetzen with steering wheels and locking rods more
2
Make Winkel Schweisstechnik (DE), Type Stripper Filter, No WS-5163, New 2012, Candle filter , Stoomwezen Tüv, Filter surface 5,4 m2, Number of candles 27, Candle sizes 40", Liquid outlet DN80, Max. temperature -10/280 [...] Top connections DN25, Capacity 214 Ltr, Vessel sizes dia.450mm x1340mm, Without candles , Working pressure -1/6 Bar, Test pressure 10,5 Bar, Capacity 40m3/h, Mounted on legs , Floorspace 0,8x0,8 M, Total height 1,9 M, Weight 320 KG, Extra Specifications Atex IIG-IIC-T3 What ... more
6

CNC machining centre HIRZT BRB

Klipphausen, GermanyGermany dealership location
17637 km
2011
used
CNC machining centre M8sur HIRZT BRB Working dimension X: 3.200 Working dimension Y: 800 Working dimension Z: 40 Number of routing spindles: 1 Torque support: Yes Vertical drilling spindles: 10 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Saw aggregate: in X-direction Machine table: Feed-through technology Interface for .dxf data: Yes Special workpiece clamping system: clamp gripper Safety device: Light barrier Operating status: still in production use more
9
entailleuse de boitier de serrure et crémone d'occasion MARZANI - type CIHS - tête de mortaisage horizontale à 2 mèches pour réalisation du boitier - tête de perçage verticale supérieure - tête de mortaisage verticale inférieure - + boitier de perçage à 3 brochesBox entailleuse espagnolette lock and used MARZANI - type CIHS - slotting head horizontal 2 PC embodiment of the housing - upper vertical drilling head - head lower vertical slotting - + drill housing 3 pin Bfadeiaizr more
3

Kurzstangenlader IEMCA VIP 70

Bruchsal-Büchenau, GermanyGermany
18046 km
1999
excellent (used)
KURZSTANGENLADER IEMCA VIP 70 - 27-03-016 Lieferzeit: sofort Be8wwcvjun Nummer: 27-03-016 Hersteller: IEMCA Typ: VIP 70 Bkxtrxp MASCHINENDATEN Baujahr: ca. 1999 L x B x H: ca. 2000 x 1000 x 1400 mm Gewicht: ca. 450 kg Sehr Guter Allgemeinzustand TECHNISCHE DATEN Steuerung: über CNC - Maschine Stangen - Durchmesser: ca. Ø 5 - 70 mm Min.Stangenlänge: ca. 250 mm Stromversorgung: ca. 230 Volt Max. Stangenlänge: ca. 1400 mm Stangenwechselzeit: 16 Sekunden Be... more
3

Gear Wabco Kupplungsnehmerzylinder Mercedes 9700511310

Emmerich, GermanyGermany dealership location
18056 km
ready for operation (used)
New clutch customer cylinder MercedesWabco number: 970 051 131 several times on warehouse also other versions and manufacturer available condition for the purchase closing is a business--business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activit... more
8

Machines for frames MARZANI .

Terre Roveresche, ItalyItaly dealership location
17822 km
2006
ready for operation (used)
Line consisting of 2 machines with a 180° door rotation transfer First machine for drilling – putting anuba Be9xmeum0d Second machine with milling tools with tool changer more
2

Technosilos - Kerzenfilter Technosilos - Candle filter

MA Barneveld, NetherlandsNetherlands dealership location
18075 km
used
Make Technosilos (ITA), Type "unknown, manufacturing tag is missing", Material Mild steel, Candle filter , Filter surface +/- 4,9 m2, Number of candles 13, Candle sizes dia.135mm x900mm, Solids outlet butterfly dia.200mm, Top connections (inlet) dia.140mm, Vessel sizes dia.800mm x2200mm, Capacity ventilator 0,43 m3/s, Motor 2,2 KW, 230/400 Volt, Mounted on frame , Floorspace 1,1x1,1 M, Total height 3,9 M, Weight 300 LG What you can expect from Foeth: all our machines are in working condition, an... more
7
Commission 75412-04 Capacity 4000 kg Drive type diesel Mast type telescope Lifting height 7100 mm Height 2490 mm Free stroke 150 mm Be9tu78cnt Forks 1200 mm technically good visually well Bereifung_vorne 405 x 80 x 24 air Rear tyres 405 x 70 x 24 air Optional 3rd valve, rear work lights, work lights front heater, STVZO approval, full cab, air conditioning Attachments: quick coupler more
1

Joggers / Squares / Cubes Table rainurée 1000x700x150 mm 1000x700x150 mm

ST GERMAIN DE PASQUIER, FranceFrance dealership location
18526 km
ready for operation (used)
Table Sizes (mm) 1000x700x150 mm Number of grooves 8 Be9nnikjav more
6

Kurzstangenlader KFT Rapid Load 12

Bruchsal-Büchenau, GermanyGermany
18046 km
2000
excellent (used)
KURZSTANGENLADER KFT RAPID LOAD 12 - 27-03-009 Lieferzeit: sofort Nummer: 27-03-009 Hersteller: KFT Typ: Rapid Load 12 M2kkdzqf Srys78ml MASCHINENDATEN Baujahr: ca. 2000 L x B x H: ca. 1500 x 1200 x 1400 mm Gewicht: ca. 230 kg Sehr Guter Allgemeinzustand TECHNISCHE DATEN Steuerung: über CNC - Maschine Stangen - Durchmesser: ca. Ø 6 - 80 mm Stangenlänge: ca. 150 - 1215 mm Höhenverstellung: ca. 950 - 1250 mm Stromversorgung: ca. 24 Volt Max. Vorschubweg: ca.... more
6

Cabins MAN TGL Fahrerhaus kurz neu teilausgestattet

Emmerich, GermanyGermany dealership location
18056 km
ready for operation (used)
MAN TGL cabin shortly, new teilausgestattetmehrere on Lagergesetzl. VAT is required, all data without guarantee, sale for export outside the EU as a deposit + error reserved condition for the conclusion of the purchase is a business-business of the buyer and their appropriate proof. Please send us proof of your business upon completion of the purchase-commercial activity (E.g., tax identification number, business license or association or Chamber card). Shipping delivery takes place after eviden... more
3

für Palettenregale Verzer

Budapest, HungaryHungary
17309 km
excellent (used)
Bars for Verzer Palletenregale. The bars are available in the following lengths: 2700 * 120 mm (3000 kg load capacity) 3600 * 115 mm (1900 kg load capacity) Nkbin Need shelves or accessories in other Compilations or remarks, please contact us. We offer a comprehensive range of new and used racks and accessories and can assist in your planning. An offer tailored to your individual is matter of course for us. Shipping: Please ask the freight specifying your postcode and location, a... more
5

BOOK BLOCK PRODUCTION - book block miscellaneous KURZ SK-W

Nürnberg, GermanyGermany dealership location
17854 km
2006
ready for operation (used)
SHORT SK-W Year 2006 - serial-No. SK-W Foil cutter short SK-W Ioox7axgq Working width 900mm more
2
Make VAN BORSELEN, Type HD42-3-DN100AP, No AFS-1503, New 2014, Material Stainless steel, Candle filter , Filter surface 1.2 m2, Number of candles 4, Candle sizes dia.140mm x700mm, Liquid outlet dia.100mm, Max. temperature 110 Degr.C, Solids outlet dia.100mm, Top connections 2x dia.16mm, Capacity 220 Ltr, Vessel sizes dia.550mm / H 750mm, Working pressure 10 bar, Mounted on legs , Floorspace 1,1x0,8 M, Total height 1,4M, Weight 230 KG What you can expect from Foeth: all our machines are in workin... more
3

Joggers / Squares / Cubes CUBE POUR PERCEUSE 1000x800x600 / T35 1000x800x600 / T35

ST GERMAIN DE PASQUIER, FranceFrance dealership location
18526 km
ready for operation (used)
Be9nnr2ouw more
6

Shredder Vecoplan VRZ 6000

Sinsheim-Reihen, GermanyGermany
18015 km
2002
excellent (used)
4 shaft shredder for shredding of thick-walled pipes. Feed via feed shaft (not included in delivery, alternatively producible) Be9bqmltax Manufacturer Vecoplan Drive: Shaft 1: 37 kW Shaft 2-4: 30 kW (each) more
5

Cabins Mercedes-Benz Atego-Kabine 4 u. 6 Zyl. kurz

Emmerich, GermanyGermany dealership location
18056 km
ready for operation (used)
used Mercedes Atego cabins, different versions, also fully equipped. Condition for the conclusion of the purchase is a business-business of the buyer and their appropriate proof. Please send us proof of your business upon completion of the purchase-commercial activity (E.g., tax identification number, business license or association or Chamber card). Shipping delivery takes place after evidence of business-Gewerbetätigkeit.Verkauf and delivery be made solely on the basis of our general terms and... more
4
Material: Regular steel Driving force: 55 kW Dimensions: L 1400 x W 1100 x H 1600 mm 2rihd3 Empty weight: Approx. 1500 kg Flow rate: 14,4 m3/h Operating pressure: 100 bar Condition: Used Technical documentation: In German Message: Available immediately more
0

Gear Honing Machine REISHAUER RZR

Staufenberg, GermanyGermany dealership location
17967 km
1995
used
workpiece diameter:240 mm centre distance:500 mm honing length max.:45 mm travel -z axis:275 mm travel -x axis:128 mm E28ei92 total power requirement: kW weight of the machine ca.:3,7 t dimensions of the machine ca.:2,6 x 2 x 2,3 m Electric cabinet 800kgs LBH 1,8 x 0,6 2,3 m Hydraulic unit 300 kgs LBH 1,1 x 0,7 x 2,3 m Turbo 1000 kgs LBH 1,5 x 1,2 x 2 m Only for honing of external teeth on spur geras and pinion shafts more
4
For sale we have a diesel generator, as new. Technical specifications : Condition: As New Engine: Perkins Generator: AVK Rated power: 630 KvA Continous power: 600 KvA Frequency: 50 Hz RPM: 1500 rpm. Year of construction: 1999 Operating hours: ca. 161 hours Dimensions (LxWxH): 400x130x190 cm Btvw7of Weight: about 4000 Kg Auto-start Price net 21000,00 € plus VAT more
5

Joggers / Squares / Cubes CUBE INCLINABLE POUR PERCEUSE 600x450x320 mm CUBE 600x450x320 mm

ST GERMAIN DE PASQUIER, FranceFrance dealership location
18526 km
ready for operation (used)
Machine equipped with: Recliner / Orientable Be9noe7z3y more
6
- Our offer number: 48/98 - Facet milling machine, milling machine, facet milling machine - Manufacturer: Gravograph - Motor: 220 volts / 70 watts - No 123673 - Serial number: RZ 123673 - good condition see photos - used - functional Blffett0 Shipping on request. We ship daily with DHL, general cargo (with loading board) and forwarding agent. All information about your purchase can be found during our business hours from Mon.-Thu. from 07:30 to 16:30 and Fri. from 07:30 to 14:00. ... more
2
Make Winkel Schweisstechnik GmbH, Type W-KF-12-40"-DOE, No WS-5166, New 2012, Material Stainless steel 1.4571 (316Ti), Candle filter , Stoomwezen tuv, Filter surface 2,4 m2, Number of candles 12, Candle sizes 40", Liquid outlet DN40, Max. temperature -10/140 [...] Top connections DN50, Capacity 110 Ltr, Vessel sizes dia.330mm x1340mm, Working pressure vac./6 bar, Test pressure 9 bar, Mounted on legs , Floorspace 0,7x0,7M, Total height 2,05 M, Weight 180 KG, Extra Specifications (no filters) What... more
6
Goal of the measuring system dimensionCONTROL is the non-contact geometry measurement of ingots. In particular, target values are measured the deviation of side lengths, stage length, angle and diagonal lengths based on the specified. In a partly automated upgrade process the recording Prism and the sensors are first adjusted and calibrated. After that, the block of ingot to be measured can be inserted. The measuring slide 2800 moved the four laser optical triangulation line scanner type for ... more
15
Manufacturer :Branson There is no information about the condition of the devices!! Be88hpnwvx more
6
CNC control Bic0atbq 80 tons of rolling pressure with a lot of accessories (44 roll pairs L 170 and L 190 mm, resandable) The machine is still in operation and can be inspected at any time by arrangement. more
2

Joggers / Squares / Cubes CUBE POUR PERCEUSE RADIALE 600x500x450 mm CUBE 600X500X450 mm

ST GERMAIN DE PASQUIER, FranceFrance dealership location
18526 km
ready for operation (used)
W8oe0 more
6
- Our offer number: 48/98 - Facet milling machine, milling machine, facet milling machine - Manufacturer: Gravograph F3yuj9z - Motor: 220 volts / 70 watts - No 123673 - Serial number: RZ 123673 - good condition see photos - used - functional Shipping on request. We ship daily with DHL, general cargo (with loading board) and forwarding agent. All information about your purchase can be found during our business hours from Mon.-Thu. from 07:30 to 16:30 and Fri. from 07:30 to 14:00. ... more
2
Make Winkel Schweisstechnik GmbH, Type W-KF-12-40"-DOE, No WS-5167, New 2012, Material Stainless steel 1.4571 (316Ti), Candle filter , Stoomwezen tuv, Filter surface 2,4 m2, Number of candles 12, Candle sizes lengte 40", Liquid outlet DN40, Max. temperature -10/140 [...] Top connections DN50, Capacity 110 Ltr, Vessel sizes dia.330mm x1340mm, Working pressure vac./6 bar, Test pressure 9 bar, Mounted on legs , Floorspace 0,7x0,7 M, Total height 2,05 M, Weight 180 KG, Extra Specifications No filter... more
5

Federzüge diverse

Barntrup, GermanyGermany dealership location
17877 km
used
Federzüge 9 Stk. 1 Stk. Fabrikat: IRAX Baujahr: 1995 Auszug: 1600 mm Tragleistung: 0,4 - 1 kg 1 Stk. Fabrikat: TECNA Auszug: 1600 mm Tragleistung: 1 - 2 kg 1 Stk. Fabrikat: TECNA Baujahr: 2008 Jiby3nz Auszug: 2000 mm Tragleistung: 2 - 4 kg 6 Stk. Fabrikat: TECNA Baujahr: 2008 Auszug: 2000 mm Tragleistung: 4 - 6 kg Hinweis: Die technischen Daten und Beschreibungen sind Abschrift der damaligen Auftragsbestätigung. Daten dienen zur Information und sind nicht verbindlich. more


claas ares...
daily

New machines via email!

Stay updated!

to

to

Edit search
CLAAS ARES 826 RZ
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.