Used Circuit Breaker for sale (3,166)

Condition: not inspected (used), Shelf rack, steel, galvanized, dimensions: 6,000 x 3,500 mm, 6 uprights, 36 supports, with stock of: cable glands, pressure compensation elements, nuts, separation clamps, contact elements, spiral cables, relays, circuit breakers, emergency stop switches, push buttons, corrugated conduits, transformers, housings, and more. Kjdpfx Ajz R Nvyehbjdu

Condition: used, Year of construction: 2010, functionality: fully functional, Robotic palletizing system from W+D Langhammer, manufactured in 2010, featuring an ABB IRB 660 M2004 palletizing robot, ABB IRC5 M2004 controller, conveyor system, and safety enclosure. System manufacturer: W+D Langhammer GmbH System type: Robotic palletizing Year of manufacture: 2010 Factory number: A1005300-146900 Robot manufacturer: ABB Robot type: IRB 660 M2004 Robot variant: IRB 660-180/3.15 Robot manufacturing date: 07/30/2010 Robot serial number: 66Z-63572 Robot net weight: 1,750 kg Load capacity according to robot variant: 180 kg Reach according to robot variant: 3.15 m Robot controller: ABB IRC5 M2004 Version: 144A 400–480V Controller voltage: 3 × 400 V Frequency: 50–60 Hz Rated current: 20 A Kjdpfx Ajz Dnu Eohbodu Short-circuit current: 6.5 kA at 400 V Controller net weight: 150 kg Controller manufacturing date: 08/02/2010 Robot operating device: ABB Teach Pendant System operation: Siemens SIMATIC Multi Panel Gripping system: Palletizing gripper included Conveyor system: Roller conveyors and infeed belts Safety enclosure: approx. 8 × 8 m Infeed belts: 2 units, each protruding approx. 1 m from the safety enclosure Outfeed roller conveyors: protruding approx. 2 m from the safety enclosure Langhammer system voltage: 3 × 400 V N PE Langhammer system frequency: 50 Hz Full load current: 35 A Short-circuit breaker: 50 A Note: The infeed and outfeed belt marked in the layout below with a red diagonal line is not installed and is not part of the system offered.

Condition: used, Year of construction: 1973, operating hours: 3 h, functionality: fully functional, machine/vehicle number: GM900, total length: 17,100 mm, total height: 4,340 mm, total width: 3,363 mm, overall weight: 7,000 kg, frame height: 4,340 mm, frame width: 2,780 mm, For sale is a cross-flow shredder mounted on a VOEST GM900 frame. The cross-flow shredder can be operated with two or three chains. The shredding chamber is open and can be equipped with different grating grids. After shredding, a permanent overband magnet is installed. The system control was newly purchased and installed. The system can be disassembled for transport. Kdjdpfsz Sp Ecox Ahbou

Condition: good (used), Caterpillar • Model: AP300 • Year: 2010 • Hours: Approx. 7,000 • Engine: CAT 3054C Price ex yard: Price is 35,900 Euros ex yard Technical data: Year of manufacture: 2010 Operating hours: 7,000 h Weight: 8,300 kg Serial number: TB2Y00190 Engine manufacturer: CATERPILLAR Engine: V3.3B Emission stage: Stage V Kdodpfsz Rp Eysx Ahbju Tire condition front: 50% Tire condition rear: 50% Working width: 350 cm Certificates: EPA, CE Delivery terms: EXW Location: Bro, Stockholm County, Sweden Equipment: Main circuit breaker

Year of construction: 2006, operating hours: 7,000 h, condition: excellent (used), functionality: fully functional, X-axis travel (longitudinal axis) mm 7280 Y-axis travel (transverse axis) mm 525 Z-axis travel (vertical axis) mm 380 A-axis rotation (spindle rotation) mm from 0° to 180° continuous Maximum positioning speed X-axis m/min 80 Maximum positioning speed Y-axis m/min 60 Maximum positioning speed Z-axis m/min 30 Maximum A-axis positioning speed From 0° to 90° in 1" Electrospindle power kW 7 Electrospindle speed rpm variable up to 20,000 Tool holder taper HSK-40E Tool magazine capacity qty. 8 Number of clamps qty. 8 Kdodpfx Ahoyi Umpsbeu Automatic clamp positioning Installed power kW 16 Residual-current circuit breaker on main line A 0.3 Weight t 4.8 Operating pressure bar 6 ÷ 8

Condition: excellent (used), Year of construction: 2017, operating hours: 5,607 h, Mazak Optiplex Nexus 3015 Fiber 3KW laser cutting machine Manufacturer: Mazak Type: Optiplex Nexus 3015 Fiber 3KW Year of manufacture: 2017 Condition: Very good, operational Operating hours: Laser: 11,282 hours Beam: 5,607 hours Power: 3KW CNC control: MAZATROL PREVIEW 3 Weight: 15,500 kg Dimensions: 8,490 mm x 3,485 mm x 2,010 mm Axis travel: 3,100 mm x 1,580 mm x 110 mm GENERAL MACHINE OPTIONS - Automatic calibration system - Focus position adjustment - Nozzle cleaning brush - Collection container for material scrap - Transformer for the European market - Protection window for multi-control cutting head - Programming function on the control panel via fixed programs - Cutting table layer detection - 1 set of adjustment tools - Machine feet / leveling shoes - Non-contact height measurement with repeat function - Manual workpiece clamping Kjdpfx Ahjzza Hkobjdu - Preparation for 3kW resonator - Additional selector switch for cutting gas - NC monitoring for protective gas pressure - Machine status indicator light - Support grid (distance between struts 100mm) will be newly installed - Preparation for dust extraction system - Work area lighting - Machine with CE marking - Automatic shutdown via circuit breaker activation - 2-position pallet changer - NC repeat function - Relocation detector - Mazatrol Preview 3 control - 15" Xga Color TFT monitor - LAN interface - USB interface for PC Special equipment - Automatic nozzle changer magazine with 8 positions - Intelligent monitoring + focus point detection - Extraction system for laser cutting machine Donaldson DFPRO4 Scope of delivery - Set of manuals in electronic form on CD - NOZZLES will all be included / customer cannot use these on the new machine - Lens for multi-control cutting head - Multi-control cutting head - 3rd auxiliary gas line (30 bar)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, nominal power (apparent): 63 kVA, secondary voltage: 200 V, type of output current: three-phase, output voltage: 200 V, Equipment: documentation/manual, type plate available, Dry type transformer 3 phase transformer 63 kVa p 3x400V/sz 3x200 V 63kVa 3 phase transformer for sale in excellent condition Manufacturer: Trafó Print type: BTZ63000 power: 63kVa U PRIMARY: 3X400V (3x125A) U SECONDARY: 3X200V frequency: 50Hz Kdsdpfx Ahjydrgpebeu GE Record D250 compact circuit breaker steel housing

Condition: ready for operation (used), Year of construction: 2024, A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Condition: genset engine: used in mint condition with renewed nozzles, generator (oversized): brand new, generator circuit breaker: brand new, batteries: brand new, switchgear with Woodword electronics: brand new, truck: 400,000 km with specialist workshop inspection. Documentation available. On-site inspection is possible. Ksdpfx Ahouh Ayxsbjdu

Condition: new, Year of construction: 2019, functionality: fully functional, Sold as a lot. Schneider Electric ComPacT devices, unused, in original packing. Price on request. Kdodpfxsw I Twqj Ahbou ComPacT NSX160F — 3 pcs. 4-pole moulded-case circuit breaker, terminals N, L1, L2, L3. Thermal-magnetic trip unit TM 160 D, 160 A at 40 °C, 50/60 Hz. Ui 800 V, Uimp 8 kV, Ue 690 V. Performance level F, Icu 36 kA at 380/415 V AC 50/60 Hz to IEC 60947-2; 85 kA at 220/240 V, 35 kA at 440 V, 30 kA at 500 V, 22 kA at 525 V, 8 kA at 660/690 V. Utilisation category A, suitable for isolation. Terminal shields and cable lugs included. ComPacT NS800NA — 16 pcs. Switch-disconnector, type NA, 3-pole, fixed, manual operation, front connection. Type NS800NA3PMF. Ui 800 V, Uimp 8 kV, Ue 690 V, Icw 25 kA for 0.5 s, Icm 52 kA peak, Ith 800 A at 60 °C, AC-23A 690 V / 800 A, 50/60 Hz, IEC 60947-3. Front connection kit supplied: copper links, phase barriers, bolts and terminal covers.

Condition: used, Weiss Type: TS 130 Weiss Temperature Shock Test Chamber, Air-Cooled (Compressor has been replaced!) Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with swivel arm): without… approx. 1820 mm, with… approx. 1915 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lift basket (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Kdodezp D Axspfx Ahbju Load on test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. circuit breaker rating: 35 A (32 A CEE plug) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2016, Mazak Optiplex 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 05/2016 Condition: used, very good, under power Availability: from May 2023 Operating hours: Time CNC AN 29.999h Time laser AN 15.653h Time automatic operation 11.839h Cutting time 28,708h Total cutting time 6,665h CNC control: MAZATROL PREVIEW 3 Weight: 15000 kg Travel: 3,100mm x 1,580mm x 110mm Power requirement: 54 kVA. GENERAL MACHINE OPTIONS 1 set of adjustment tools Support grid (distance of the bars 100mm) Automatic calibration device Non-contact height sensing with repeat function Nozzle cleaning brush Focus position adjustment Ksdpfx Ahjyucguebjdu Manual workpiece clamping Machine feet / leveling shoes Machine status indicator light NC monitoring for shielding gas pressure without resonator Programming function on the control unit via fixed programs Collecting container for material waste 6981NO612 Cutting table layer detection Transformer for the European market Additional selector switch for cutting gas CUTTING HEADS Multi-Control cutting head Lens for Multi-Control cutting head Cassette for focus lens Multi-Contro cutting head Protection window for Multi-Control cutting head 5 pieces NOZZLES Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm each 5 pieces Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 3rd auxiliary gas line (30 bar) PAINTING Mazak standard color PROTECTIVE HOUSING Laser safety screen (5 pieces) SAFETY EQUIPMENT Work area lighting Machine with CE mark Preparation for dust separator FACTORY AUTOMATION Automatic switch-off via circuit breaker triggering The power supply is switched off at the end of a program. PALLET CHANGER 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 15″ Xga Color Tft monitor LAN interface Mazatrol Preview 3 control NC repeat function Relocation Detector USB interface for PC MACHINE MODEL Preparation for 4kW resonator GENERAL MACHINE OPTIONS Automatic nozzle change magazine with 8 slots Nozzle cooling function Fiber Laser Resonator 4kW incl. cable and cooling unit Intelligent monitoring + focus point detection Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION Set of manuals in electronic form on CD

Condition: new, Year of construction: 2026, Josan generator sets – proven, robust quality! We offer leasing and financing options. Feel free to ask! ‼️5-year warranty*‼️ Equipped with sockets and Siemens circuit breakers, ATS, and more. Available for pickup in Heilbronn. We also offer affordable shipping. Just ask! Up to 1000 kW possible. All models feature diesel engines with electric starters and 56 kW at 1500 RPM. Feel free to compare prices and inquire about the types of engines offered at what price. Check what was manufactured in Germany or Europe. With us, you can also choose a model with a Cummins engine (at an additional cost). Top quality at a great price! We are here for you in Heilbronn. German company, German laws, German service – that's what you get with us! The price includes everything – all-inclusive! Our electricians, who hold German master craftsman certificates, will quickly assist you without any complications, should the need arise. We also rent out generator sets, so you won't experience any downtime. Discounts are available for orders of 10 units or more. Simply contact us, and we will call you back. Emergency generator set 320 kVA / 250 kW: ➡️Proven engine ➡️Proven 6-cylinder diesel engine ➡️Very quiet, only approx. 65 dB ➡️3-phase, 380/400 V, 220/230 V, 50 Hz ➡️AVR regulation ➡️Dimensions approx. 3700mm x 1300 x 1910mm ➡️Weight approx. 2400 kg ➡️Electric starter ➡️8 sockets at 220 volts, 16 A ➡️1 socket at 400 volts, 16 A ➡️1 socket at 400 volts, 32 A ➡️1 socket at 400 volts, 63 A ➡️Optional: 1 socket 400 volts, 125 A ➡️Surge voltage protection Kjdjp E Egaspfx Ahbsdu ➡️Socket distribution box, protection class IP44 ➡️CE certificate ➡️With battery charger ➡️With ATS Net price: €22,900.00 Emergency generator set 150 kVA / 120 kW: ➡️380/400 volts, 220/230 volts, 50 Hz ➡️AVR regulation ➡️Very quiet, only approx. 65 dB ➡️Dimensions approx. 2800 x 1100 x 1500mm ➡️Weight 1390 kg ➡️Proven 6-cylinder diesel engine with 132 kW / 1500 rpm. ➡️Electric starter ➡️8 sockets at 220 volts, 16 A ➡️1 socket at 400 volts, 16 A ➡️1 socket at 400 volts, 32 A ➡️1 socket at 400 volts, 63 A ➡️Optional: 1 socket 400 volts, 125 A ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️CE certificate ➡️With ATS ➡️With battery charger Net price: €10,900.00 Emergency generator set 63 kVA / 50 kW: ➡️380/400V, 220/230V, 50 Hz ➡️Very quiet, only approx. 65 dB ➡️Proven 4-cylinder diesel engine with 56 kW, 1500 RPM ➡️Weight approx. 860 kg ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️Electric starter ➡️CE certificate ➡️8 sockets at 220 volts, 16 A ➡️1 socket at 400 volts, 16 A ➡️1 socket at 400 volts, 32 A ➡️1 socket at 400 volts, 63 A ➡️Compliant with all EU standards (including 220 volts as used in Germany) ➡️With AVR regulation ➡️With battery charger ➡️With ATS Net price: €6,900.00 Emergency generator set 50 kVA / 40 kW: ➡️Proven engine ➡️Proven 4-cylinder diesel engine ➡️Very quiet, only approx. 65 dB ➡️380/400V, 220/230V, 50 Hz ➡️Dimensions approx. 2250 x 960 x 1270 mm ➡️Weight approx. 860 kg ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️Electric starter ➡️CE certificate ➡️With ATS ➡️AVR regulation ➡️With battery charger Net price: €6,900.00 Emergency generator set 25 kVA / 20 kW: ➡️25 kVA / 20 kW ➡️Proven engine ➡️Very quiet, only approx. 65 dB ➡️3-phase, 380/400V, 220/230V, 50 Hz ➡️Dimensions approx. 1800 × 900 × 1000 mm ➡️Weight approx. 650 kg ➡️Electric starter ➡️CE certificate ➡️With ATS ➡️AVR regulat

Condition: used, This listing is for the APC Back-Ups CS 500 UPS The unit is in full working condition and is ready for immediate use Key Specs & Performance Kdodpfjxv Duzex Ahbou Capacity: 500 VA / 300 W – suitable for basic PC setups, modems, routers, or low-power peripherals Runtime: ~2.4 minutes at full 300 W load ~13.8 minutes at half load (150 W) Topology: Off-line (standby) UPS with ~6 ms transfer time Waveform Output: Stepped approximation to a sine wave Connections & Interfaces Input Connection Type: IEC 60320 C14 Output Connection Types: 3 × IEC 60320 C13 (Battery Backup + Surge Protection) 1 × IEC 60320 C13 (Surge Protection Only) 2 × IEC jumper surge-protected outlets Number of Cables: 2 included Data-Line Protection: RJ-11 phone/fax/DSL line Communication Ports: USB + optional RS-232 Management Software: Supports APC PowerChute Personal Edition Battery & Power Battery Type: Sealed lead-acid maintenance-free (VRLA) Battery Cartridge: APC RBC2 Battery Recharge Time: ~8 hours User-replaceable: Yes, hot-swappable Battery Life Expectancy: 3–6 years Cold-Start Capable: Yes Self-Test: Automatic periodic testing Surge & Safety Features Surge Energy Rating: 300–310 J Noise Filtering: Full-time EMI/RFI filtering Audible Alarms: Yes – for battery use, overload, low battery LED Indicators: Status display panel Certifications: CE, VDE, GOST, C-Tick Resettable Circuit Breaker: Included Physical Characteristics Height: 16.5 cm Width: 9.1 cm Depth: 28.4 cm Net Weight: 6.03 kg Color: Beige/Light grey (typical for CS series) Noise Level: Approx. 40–45 dBA

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 - VISCOM upgrade to VEG 101 - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. Kdedpszuw R Hofx Ahbsu The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports - Invoices for the work performed - VISCOM training materials - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Year of construction: 2005, condition: used, functionality: fully functional, For sale is a used, modular WENO assembly system/assembly line for automated or semi-automated manufacturing processes (pressing and screwing). The system is ideally suited for automotive suppliers, mechanical engineering, the electrical industry, and industrial assembly operations. Due to its modular design based on aluminum system profiles, the system can be flexibly adapted or converted for new production processes. CONTENTS & INTEGRATED HIGHLIGHTS: • Industrial screwing station from Atlas Copco & Lübbering: - Atlas Copco Power Focus 3009 Controller (PF3009-C-HW) - Atlas Copco Tensor DS7 / S4 operator terminal - Atlas Copco ETD DS7 electric screwdriver with balancer suspension - Lübbering flat-head gearhead for tight/difficult-to-access screw locations • Pneumatic pressing stations for joining and press-fitting operations • Pneumatic conveyor and transport system for workpiece guidance • Several ergonomic work and processing stations • Integrated control cabinet with Siemens LOGO! PLC control, Siemens SITOP 24V power supply, circuit breakers and safety relays TECHNICAL DATA: • Manufacturer: WENO Werkzeug & Maschinenbau GmbH (Viersen) • Year of construction: 2005 • Machine no.: 0197/02 • Order no.: 241992 • Electrical connection: 3 × 400 V / 50 Hz • Full load current: 32 A Ksdpszzp Ttefx Ahbsdu • Operating pressure: 6 bar • Total weight: approx. 3,500 kg • Wiring diagram no.: ELA 019702 • CE marking: Available CONDITION & SERVICE: • The system is in fully functional, well-maintained condition from ongoing operation. • An inspection is possible after prior appointment. • Disassembly, loading and transport can be arranged upon request. Upon request, transport and loading can be organized throughout Europe, for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: good (used), Caterpillar 340F • Model: 340F • Year: 2016 • Engine Stage IV • Hours: 13,944 (5,500 Idle Hours) Operating hours: 8,444, original color • Serial number: EAR00256 • Weight: 42,000 kg • Undercarriage: 70% • Quick Coupler Hyd. S90 with bucket • Accessories: Central lubrication system, A/C, diesel heater • GPS prepared Technical data: Year of manufacture: 2016 Operating hours: 13,900 h Weight: 41,000 kg Kdedjz Rpx Tepfx Ahbou Serial number: EAR00256 Engine manufacturer: CATERPILLAR Engine: C9.3 ACERT Emission stage: Stage IV Drive type: Diesel Certificates: EPA, CE Delivery terms: EXW Location: Bro, Stockholm County, Sweden Equipment: Hydraulic quick coupler, hose rupture valve boom, hose rupture valve dipper, air conditioning, fire suppression system, AdBlue, tool attachment, track support, main circuit breaker, central lubrication, diesel heater, joystick control, steel tracks, standard bucket, slope hydraulic system, cab guard -> demolition/FOPS (falling object protection structure) cab guard.

Condition: excellent (used), Operating hours: 1,200 h Serial number: FA15668 Engine: Stage IIIB compliant Total weight: 7,200 kg Cab type: Enclosed cab Engine model: Q583.3 Engine power: 74 kW (100.61 hp) Engine manufacturer: CUMMINS Transmission: Automatic Original color: Yes Kodjz Rp Ihepfx Ahbodu Transport dimensions (L x W x H): 5,280 x 1,700 x 2,730 mm Country of manufacture: Sweden Delivery terms: EXW Certificates: EPA, CE Construction equipment accessories: Main circuit breaker Technical data: Year of manufacture: 2015 Operating hours: 1,300 h Weight: 7,200 kg Serial number: FA15668 Engine manufacturer: CUMMINS Engine: Q583.3 Emission stage: Stage IIIB Transmission: Automatic Certificates: EPA, CE Delivery terms: EXW Location: Bro, Stockholm County, Sweden Equipment: Main circuit breaker

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Kdodjz A Hhuspfx Ahbeu

Condition: excellent (used), Year of construction: 2017, Mazak Optiplex Nexus 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 12/2016 Condition: used, very good, under power Availability: from July 2023 Operating hours: Time CNC AN 16.276h Time Laser AN 15.653h Time automatic operation 11.096h Cutting time 10,964h Total cutting time 7,365h CNC control: MAZATROL PREVIEW 3 Weight: 12800 kg Power requirement: 57 kVA. Dimensions: 8,490mm x 3,485mm x 2,010mm Axis travel: 3,100mm x 1,580mm x 110mm GENERAL MACHINE OPTIONS 6981SD120 1 set of adjustment tools 6981TL307 Support grid (distance between bars 100mm) 6981AS670 Automatic calibration device 6981SD154 Non-contact height sensing with repeat function 6981AS684 Nozzle cleaning brush 6981AS678 Focus position adjustment 6981SD168 Manual workpiece clamping 6981SD130 Machine feet / leveling shoes 6981SD282 Machine status indicator light 6981SD216 NC monitoring for shielding gas pressure 6981SD189 Without resonator 6981NO513 Programming function on the control unit via fixed programs 6981CV222 Collecting container for material waste 6981NO612 Cutting table layer detection 6981EL110 Transformer for the European market 6981SD200 Additional selector switch for cutting gas CUTTING HEADS Kedpsyuchxofx Ahbedu 6981LN705 Multi-Control cutting head 6981LN005 Lens for Multi-Control cutting head 6981LN610 Cassette for focus lens Multi-Contro cutting head 6981LN602 Protection window for Multi-Control cutting head 5 pieces NOZZLES 6981NZ068 Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm 5 pieces each 6981SD317 Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces 6981SD303 Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 6981TL321 3rd auxiliary gas line (30 bar) PAINTING 6981SD728 Mazak standard color PROTECTIVE HOUSING 6981CC096 Laser safety screen (5 pieces) SAFETY DEVICE 6981SD030 Work area lighting 6981SD748 Machine with CE mark 6981ES230 Preparation for dust separator FACTORY AUTOMATION 6981AS050 Automatic switch-off via circuit breaker trigger The power supply is switched off at the end of a program. PALLET CHANGER 6981PC010 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 6981NC319 15″ Xga Color Tft monitor 6981NO869 LAN interface 6981NC083 Mazatrol Preview 3 control unit 6981FT575 NC repeat function 6981MZ200 Relocation Detector 6981NO870 USB interface for PC MACHINE MODEL 6981SD185 Preparation for 4kW resonator GENERAL MACHINE OPTIONS 6981AS662 Automatic nozzle change magazine with 8 slots 6981AS685 Nozzle cooling function 6981DEAA002 Fiber Laser Resonator 4kW incl. cable and cooling unit 6981SD118 Intelligent monitoring + focus point detection 6981RB165 Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED 6981DEES001 Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION 6981SD073 Set of manuals in electronic form on CD

Condition: good (used), functionality: fully functional, Equipment: lighting, Hall office / supervisor office WSM W10, 3 x 2 m with electrical wiring and LAN Hall office / supervisor office WSM W10 – modular room system for indoor installation, 3 x 2 m, fully equipped with electrical wiring and network connections. Used hall office from the renowned manufacturer WSM (Walter Solbach Metallbau), ready for operation. Suitable as a supervisor office, storage office, workshop office, or control center in production and storage halls. Technical data: - External dimensions: 3,045 x 2,045 mm - Height: 2,680 mm, clear height 2,500 mm - Floor area: approx. 6.2 m² - Design: indoor installation (room-in-room), with floor - Steel structure with crane lifting points, can be moved as a complete unit - Glazing on 2 sides (long side and end side) - 1 entrance door with ventilation grille Kjdpfsz Hftkox Ahbedu - Frame blue, wall panels white Electrical and network installation: - Power supply via CEE plug 32 A - Sub-distribution with circuit breakers - Several double sockets in the parapet channel - Network sockets RJ45 at the workstation, LAN cabling installed - Ceiling lighting Interior: - Permanently installed desk with solid wood top - Acoustic slat panels in wood look on the rear wall Condition: Used, fully functional. Interior in very good condition. Exterior shows signs of use, individual small dents in the lower wall panels. Floor shows signs of use. Comparable new price including electrical and network equipment: approx. €6,000 net. Scope of delivery: as shown in the pictures. Location and loading: - Location: 99428 Grammetal (Thuringia, near Weimar) - Loading onto a truck possible on site - Delivery and installation on request - Viewing by appointment Invoice: Sale by a specialist dealer with a proper invoice and VAT shown. Price net plus statutory VAT.

Condition: excellent (used), ABB SACE Emax E3S/MS 25 2500A 4-Pole Drawout Switch-Disconnector with Cradle ABB SACE Emax E3S/MS 25 heavy-duty low-voltage air switch-disconnector, rated at 2500 A, supplied with its withdrawable chassis and rear busbar connections. Designed for use as a main incomer, bus coupler or isolating switch in industrial low-voltage distribution systems, data centres, generator installations, production facilities and critical-power applications. This is an MS switch-disconnector / isolator, not a circuit breaker fitted with an electronic protection trip unit. Technical details Kdsdpszlyk Dofx Ahbeu Manufacturer: ABB Series: SACE Emax E3 Model: E3S/MS 25 Equipment type: Air switch-disconnector / isolator Rated uninterrupted current, Iu: 2500 A at 40°C Number of poles: 4 Version: Withdrawable / drawout Rated short-time withstand current, Icw: 75 kA for 1 second Manual stored-energy operating mechanism Push ON and Push OFF controls Mechanical position and spring-status indicators. Rear high-current busbar terminals Withdrawable chassis / fixed part included Key-locking mechanism fitted

Condition: used, Mitsubishi NF400-CS Circuit Breaker – 400 A For sale is a used Mitsubishi Electric NF400-CS circuit breaker. Manufacturer: Mitsubishi Electric Type: NF400-CS Rated current: 400 A 3-pole Voltage: 600 V AC Condition: Used Removed from a fully operational machine Fully functional up to removal Sold as pictured Kjdsz Euywspfx Ahbjdu Signs of normal wear from use

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN -used- PC control with optimization, scoring unit, automatic cut length detection, side pressure device, air cushion tables, movable tables, infinitely variable feed rate of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, Cutting width: 4,200 mm, Max. cutting height: 72 mm, Number of clamps: 6 pcs, Feed rate saw unit max.: 100 m/min, Feed rate for width stop max.: 80 m/min, Main saw motor power: 11 kW, Scoring saw motor power: 1.5 kW, Main saw blade Ø: 300 x 30 mm, Kdodpfjyrqrtjx Ahbju Scoring saw blade Ø: 180 x 30 mm, Extraction port Ø bottom: 140 mm, Extraction port Ø on pressure beam: 3x100 mm, Airflow volume: 5,000 m³/h, Compressed air connection: 6 bar, Air consumption: 140 l/min, Nominal current: 38 A, Max. circuit breaker: 50 A Quality information: - complete basic inspection - complete basic cleaning - Electrics checked - immediately ready for operation

Condition: new, fuel type: diesel, motor manufacturer: Perkins 1103A-33G1, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 730 kg Functional Generator capacity: 33 kVA Dimensions of cargo space: 157 x 76 x 123 cm CE mark: yes Other information Fuel consumption: 5.2 Liter/Hour at 75% Load Prime Generator: FG Wilson FGL20030 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 71 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = Kdsdpjzyldlsfx Ahbju - Battery - Control Panel - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: new, fuel type: diesel, motor manufacturer: Caterpillar C3.3, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 889 kg Functional Generator capacity: 50 kVA Dimensions of cargo space: 230 x 96 x 140 cm CE mark: yes Other information Fuel consumption: 8.7 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 103 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy Kdjdpey R I Htofx Ahbju - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames.