Used Chiron Fz 15 W for sale (109)

Condition: excellent (used), Year of construction: 2015, operating hours: 14,000 h, Chiron Mill FX 800 machining center with 148-position background magazine TECHNICAL DATA Travel, X-axis: 800 mm Fodpstvz Azofx Afispn Travel, Y-axis: 630 mm Travel, Z-axis: 550 mm Swivel axis: +- 120 ° Rotary axis: 360° Rapid traverse speed, X-axis: 60 m/min Rapid traverse speed, Y-axis: 60 m/min Rapid traverse speed, Z-axis: 60 m/min Spindle, max. torque: 180 Nm Spindle power: 17.0 - 47.2 kW Spindle, speed: 12`000 rpm Tool holder: HSK-A 63 Rotary table, diameter: 280 mm Thread and fitting hole pattern M16 x 15 H7 X 50 Load capacity: 320 kg SCOPE OF OFFER U.A: (list not exhaustive): Chiron machining center, Year of construction: 2015 Knoll chip conveyor 750 K-1/150 BMF TPF 350S high-pressure pump Renishaw RLP40Q touch probe Receiver: Renishaw RMI-Q Mechatronic flow sensor SB0500 Background magazine, 148-fold Operating documentation Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Fodpevdt Rfefx Afiopn Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 5 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale!

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Fpodpfxogmi Une Afijn Highspeed (2) 60m/min. Spindle ...

Condition: like new (used), Year of construction: 2012, Model: MILL 2000 5 axis CNC SIEMENS 840 X, Y, Z (mm) 2000 - 480 - 630 Fsdpfxoiraffs Afijpn Swiveling head (B axis) +/- 100°. Rotating spindle NC-WENDER with vice Bar machining Milling head 12.000 rpm / 140 Nm Tools 163 HSK-A 63 DIN 69893 IKZ 70 bar Heidenhain linear measuring system Measuring probe 3D touch probe Renishaw Chip conveyor

Condition: as good as new (ex-display), Year of construction: 2023, Robot application Robot type : FANUC M-20iD/35 Payload max : 35 kg Reach max : 1.813 mm Fpsdporcirrsfx Afijn Robot equipment Gripper exchange : Interface for quick manual gripper exchange Workpiece gripper : preparation for the attachment of a pneumatic workpiece gripper Blow-off device : prepared for workpieces incl. controlled pneumatic connection Turning station : Designed as a depositing station Workpiece storage Version : Drawer storage Capacity : 3 drawers 1,100 x 570 mm each 300 kg Equipment : 1 set of standard inlays , 4-cornered sheet steel opening Workpiece sizes max (d x h) : 250 mm x 120 mm Worker protection : Safty Laser System Machine requirements Interface : Loader interface with direct door query Machine doors : Automatic doors Recommended machine equipment Tool : Tool life monitoring, tool breakage monitoring Workpiece : Workpiece support monitoring Flushing system : Fixture flushing Chip removal : Chip conveyor Gripper system Type : Single 2-finger parallel gripper Schunk PGN-plus 160-1 Gripper : Adjustable standard gripper fingers Gripper finger stroke : 16 mm per finger Workpiece dimensions (d) : 10 mm to 250 mm Workpiece weight max : 8.2 kG Clamping : Pneumatically actuated

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 840 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 6 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, torque: 140 Nm, controller manufacturer: Siemens, controller model: 840D-SL, rotational speed (min.): 12,000 rpm, tool length: 370 mm, power: 22.5 kW (30.59 HP), Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine can be viewed in operation at any time. Bridge dimension 1250mm Working table swivels +/- 120 Table diameter 280mm Rotary table speed 200 rpm Workpiece weight max. 320kg Tool holder HSK63 Spindle speed range 12,000 rpm Spindle drive 7.5 / 22 KW Torque 140 Nm gr. tool length 370mm Tool diameter 75/160 mm Fedpstdnnqsfx Afiepn Tool weight 8kg Rapid traverse 60 m/min. CNC SIEMENS 840 D-SL Software: Teleservice Software: 5-axis simultaneous 24-fold tool changer NC swivel bridge, clamping length 1050 x 250 mm. 2-axis swivel device CHIRON CASD 280 / 4th and 5th axis, pitch 0.0001° Clamping hydraulics through table center 200 bar Workpiece support control ( Airsensoring ) CHIRON Lasercontrol F295 Automatic central lubrication Automatic work area door Electrical interface PROFIBUS for robots Coolant package Internal coolant supply 38 bar Coolant tank 900 l Paper belt filter device Chip conveyor As the object of purchase is a used item, the sale is made under exclusion of any liability for material defects and/or resulting consequential damage, regardless of the legal grounds.

Condition: used, 5 axis: yes Milling and turning: yes 5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Fedpfx Aegph Rnofijpn Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle 20-12.000 min.’ – 140 Nm.12.000 RPM 12,5 KW/Max 34kW Swivelling head (CNC controlled) ± 100° Low hours This machine can be inspected under power in our Warehouse Mimu Machine Tools (Italy)

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, controller manufacturer: Beckhoff, Spindle Speed: 60,000 rpm Spindle power: 0.625 kW Torque: 10 Nm Tool holder: HSK-EZ15 Fedevyp Ewjpfx Afiepn Number of tools: 60 Working area Travel X: 78 mm Travel Y: 56 mm Travel Z: 50 mm B-axis: -110° to +110° C-axis: 400 rpm Chip-to-chip time: 3.5 sec Rapid traverse: X/Y/Z 30/30/30 m/min Workpiece changing device Technology: Zero-point clamping system Workpiece changing time: 10 sec Max. table load: 10 kg Accessories Chip management: Chip trolley Coolant management: Coolant system Workpiece measurement: Renishaw measuring probe – RMP24-micro Tool measurement: tool length measurement / breakage Other: Automation Feed 5

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Fpedpfogqg Sgjx Afijn Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ...