Used Chiron Fz 08 for sale (107)

Condition: ready for operation (used), Year of construction: 2021, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 4, This 4-axis CHIRON DZ 18 W vertical machining center was manufactured in 2021. Consider the opportunity to buy this CHIRON DZ 18 W vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits Bwodsx D Nmxepfx Aa Esi • Travel speed (x-y-z): 75 m/min • Spindle distance 400 mm Extra Information NC rotary table, type ATU 200, installed in the IWW/ Rotary feedthrough for IWW/ Axes on the work area/ Double-spindle headstock/ HS drive 2 x 25.3 kW - 15%, 12,000 rpm - 140 Nm/ Tool changer 2 x 35 tool positions, HSK-A 63, 8 kg/ VS drive X-Y-Z 75-75-75 m/min/ Automatic central grease lubrication/ Sinumerik 840D solution line, 10.4" color screen/ Control system/ Control interface/ RemoteLine SIE/MTX/ Maintenance management on screen/ for machining tilted surfaces, SIEMENS/ Operating hour and workpiece counter on screen/ Control cabinet cooler as door-mounted unit/ Signal light for 3 signals/ Fluid tower in open design/ Oil-free maintenance unit/ Cooling unit/ A u t t t e l l e l e m e n t e/ Chip conveyor scraper belt 1050 mm, rear/08, left/15, 18, 200 l/ Coolant system KF400-FKA900/900 l, 70 bar/ Bridge for cables and hoses/ Machine preparation for internal flushing/ Flushing of fixtures in the machining station/ 1 flushing gun outside the splash guard/ Work area flushing/ Additional equipment for extraction/extinguishing -/ Additional equipment for pneumatics/hydraulics -/ 1860 workpiece support control, coarse/ Hydraulic connection for 200 bar, single-acting/ Hydraulic connection for 200 bar, double-acting/ Regulated, lubricated air purge connection/ Hydraulic unit extension/ Additional equipment for measuring/tool breakage detection -/ RLP40Q measuring probe/ Whisker switch for tool breakage detection/ Additional equipment for machine operation -/ Automatic loading door Open/Close/ Walk Switch/ Additional Equipment: NC Control -/ M Function Package/ Variable Clamping Logic - Siemens/ Powersave/ Siemens Tool Management/ Comfort Cycle Fixture Flushing/ Revolutional Feed/ Loader Interface with Profinet/ Direct Door Detection in 'Open' Position/ Commissioning and Training/ Power Supply / Compressed Air 6 bar / Ambient Temperature 15°-40° C

Condition: ready for operation (used), Year of construction: 2011, operating hours: 21,578 h, number of axes: 4, This 4-axis CHIRON DZ15KWM HS was manufactured in 2011. Ideal for precision vertical machining, this model offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the CHIRON DZ15KWM HS machine we have for sale. Contact us for more information. Extra Information Bodox D Nmropfx Aa Eewi Machine still under power

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 630 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 450 mm, controller manufacturer: SIEMENS, controller model: 840D solution line, number of axes: 3, This 4-axis CHIRON DZ18W was manufactured in 2018. Ideal for precision vertical machining, this model offers robust construction and reliable performance. Consider the opportunity to buy this CHIRON DZ18W vertical machining centre. Contact us for more information. Additional equipment • OPTIONAL: robot, entire cell including conveyor belts, PLC, turning station Machine Benefits Technical Machine Benefits • Tool positions: 2x35 • Tool length max: 380 mm Extra Information Splash guard panel with fully enclosed work area/ with loading door, electrically protected/ including replaceable safety windows/ Work area partition with stainless steel louvres/ Height 2340 mm above floor, including machine light/ Mini control panel with start and reset button for M61/M62 pallet organization/ Integrated workpiece changing device IWW 0/180°/ for optimal chip flow with center partition made of sheet steel/ Workpiece changing time approx. 3.5 seconds, weight-dependent, self-regulating/ thanks to self-learning speed control./ Transport load per side 0 - max. 250 kg/ Max. 120 kg weight difference between the two table sides./ Each table side is prepared for the installation of a rotary table package./ Distance between spindle mount and swivel center/point /WW minimum 75 mm/ Travel paths: X-axis 630 mm/ Y-axis 530 mm/ Z-axis 450 mm/ Tank flushing system with coolant connection/ NC rotary table, type ATU 200/ Integrated into the integrated workpiece changing device IWW 0/180°/ With hydraulic clamping, holding torque 1,200 Nm,/ Repeatability +5" with/ faceplate © 225 mm, with centering® 60 -0.008,/ Counter bearing with hydraulic clamping, holding torque 800 Nm./ On the rotary table and counter bearing side. Swivel radius 285 mm/ 7th or 5th NC axis, plug-in ready/ Regulated pneumatic connection for sealing air/ Controlled hydraulic connection for clamping./ Rotary feedthrough 2 x 5-way/ Rotary table side: 4 x hydraulic/pneumatic, 1 x Pneumatics/ 4 x hydraulic/pneumatic on the counter bearing side, 1 x pneumatic/ Working area - rotary table assignment/ AF1 Rotary table ATU 200/ AF2 Rotary table ATU 200/ Double-spindle headstock/ Prepared to accommodate 2 main spindle motors with spindles/ Spindle distance in X-axis 400 mm/ Main spindle drive with 2 AC motors/ Air-operated, with tool clamp monitoring/ 11.0 kW at 100% duty cycle/ 25.3 kW at 15% duty cycle/ Speed up to 12,000 rpm/ Max. torque 140 Nm/ Drilling capacity 2 x 42 mm/ in steel E355/ Automatic tool changer/ with robust, fully encapsulated pick-up chain magazine/ Bwsdsx D Nmfjpfx Aa Eoi 2 x 35 tool positions/ HSK-A 63 DIN tool shank 69893/ Tool width max. 78 mm/ Tool width with free adjacent positions max. 140 mm/ Tool length max. 380 mm/ Tool weight max. 8.0 kg (max. magazine load 240 kg)/ Tool change time approx. 0.9 s (control system dependent)/ Soan-to-chip time approx. 2.2 s (control system dependent)/ Feed drive for X, Y, and Z axes/ Digital drives with direct position measuring systems, overpressure application/ Rapid traverse speed 75 - 75 - 75 m/min/ Axis acceleration 1.0 - 1.4 - 1.6 g/ SIEMENS CNC control 840D solution line/ incl. 10.4" TFT color screen / full keyboard / operator panel OP010S/ 1280 1 (TCU / NCU 720.3, 1 channel)/ User interface Operate/ NC RAM 3 MB (max. 1 MB available)/ (max. 200 programs available)/ for running part programs according to DIN 66025/ CF card with 8 GB storage capacity (max. 3 GB available)/ Power display, operating hours and workpiece counter on the screen,

Condition: used, Rotary indexing thread tapping machine, 8-station rotary table. 1 inspection station, 1 vertical and 1 horizontal thread tapping unit. With guide bush 1 mm pitch Chiron, thread tapping unit with guide bush 0.7 mm pitch, M4. One discharge station, coolant system. Bodpfxeyl Ntps Aa Eewi

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 550 mm, table length: 2,600 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm. Additional equipment • Chip conveyor Machine Benefits Bedpfx Asyi Eh Dja Eowi Technical Machine Benefits • Rapid feed 40 m/min • Tool magazine with capacity for 24 tools

Condition: used, Year of construction: 2004, operating hours: 77,374 h, machine/vehicle number: IntNr231477, Vertical CNC Machining Center CHIRON MILL 6000 high speed with NC swivel head Year of manufacture: 2004 – major overhaul by manufacturer CHIRON in 2013 The machine underwent a complete factory overhaul by CHIRON in 2013. Operating hours: approx. 80,374 h Spindle replacement: March 2021 – spindle hours: approx. 8,000 h Maintenance performed: January 2024 Bsdpjyg Nqwsfx Aa Eowi Technical Specifications: Control: Siemens 840D (PCU50, NCU572.4) NC swivel head High-speed package: Motor spindle 12,000 rpm, 140 Nm Axis travels: X 6,000 mm / Y 630 mm / Z 550 mm Rapid traverse in X / Y / Z: 60 m/min Chip-to-chip time: 3.0 sec (3.3 sec DIN) vertical / 4.7 sec (5.0 sec DIN) horizontal Production package: - Scraper belt conveyor, discharge height 1,050 mm - Preparation for internal coolant supply (IKZ) - Vacuum rotary filter KNOLL VRF250 (suitable for steel, cast iron, aluminum, plastic, brass) - High pressure 70 bar with HP pump and variable valve - Automatic loading doors - Central partition for pendulum machining - 92 tool positions HSK-A63 (rear magazine) - 5-axis milling package - Air blast - Tool life monitoring - Additional V24 RS232 interface in electrical cabinet - BDE/MDE interface (states: machine on, machine running, piece counter) - Marposs (Brankamp) collision monitoring CMS100 - 3D machine model for kinematic simulation in CAM programming system - Hydraulic unit 210 bar, 2 clamping circuits, separate system clamping pressure per pendulum field, clamping pressure monitoring Linear clamping system KOHN 8 hydraulic clamping vises KOHN Multi 2000 MFS 125/680 HD Two-part operator platform (tread grid) across the full 6,000 mm operating width Dimensions and Weight: Machine height: approx. 3,000 mm Total weight: approx. 20,000 kg The machine can be inspected under power by appointment. Technical data and details are subject to change or error, subject to prior sale.

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Bodpsx I Sh Aefx Aa Ejwi Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 4 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, nominal power (apparent): 24 kVA, 2 PCS CNC CHIRON DZ15 W MAGNUM HS Drilling capacity in steel: 60: 2 x 6 36 mm (with indexable insert drill) Guides: with long-life grease lubrication Speed range: 20-12,000 rpm Bedeyiyyujpfx Aa Eewi CNC control: SIEMENS 840D Distance between spindles on X-axis: 250 mm X-axis: 300 mm Y-axis: 400 mm Z-axis: 425 mm (with variable tool change plan) Rapid traverse: 60 m/min on X, Y, and Z axes Main spindle drive: 1 unit with 2 AC motors Power at 100% continuous operation: 9.5 kW Power at 15% intermittent operation: 14.0 kW

Condition: ready for operation (used), Year of construction: 2004, A machining center Chiron, which was completely overhauled in 2013, is available. Travel path X/Y: 6000mm/630mm, rapid traverse: 60m/min, tool positions: 92, tool holder: HSK-A63, speed: 12000rpm, torque: 140Nm, milling axes: 5, weight: approx. 20000kg, control: Siemens S840D, operating hours: 77344h. Includes scraper belt conveyor, OKZ preparation, Knoll VRF 250 vacuum rotary filter, high-pressure pump (70bar), emulsion mist extraction (2x800m³/h), central partition for pendulum machining, hydraulic unit (210bar), and Kohn linear clamping system with 8x hydraulic vices Multi 2000MFS 125/680 HD. Documentation available. An on-site inspection is possible. Bsdpfx Aajw Nyi Nj Eewi

Condition: ready for operation (used), Year of construction: 2007, Travel X/Y/Z: 800mm/550mm/550mm, tool holder: HSK63, spindle speed: 12000rpm, tool positions: 65, control: Siemens 840D, spindle hours: approx. 16000h. 3-axis robot System 3R Transformer WorkMaster, year of manufacture: 2008, transfer weight: 150kg, stroke: 1500mm, pallet positions: 2x12. Including System 3R GPS 240 zero-point clamping system, Knoll chip conveyor, Knoll paper band filter, Blum LaserControl laser measuring system, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible. Bodexg Rigepfx Aa Eewi

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 259-45, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840 D, spindle speed (max.): 12,000 rpm, The following automation is also being auctioned from the same location: System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) Bwsdpfx Asyfum Uja Eoi TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Tool holder: HSK 63 Spindle speed: 12,000 rpm Number of tool positions: 65 MACHINE DETAILS Control: Siemens 840 D Spindle hours: approx. 16,000 h EQUIPMENT Knoll chip conveyor Knoll paper belt filter Blum LaserControl laser measuring system Renishaw digital 3D touch probe Automation interface Automatic door Oil mist extraction Internal coolant supply

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840D solution line, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Bedeyfgf Nspfx Aa Ejwi Travel Y-axis: 630 mm Travel Z-axis: 550 mm Rapid traverse speed: 60 m/min Spindle speed: 12,000 rpm Clamping area: 3,600 x 710 mm T-slots: 5 Number of axes: 3 Tool magazine: 40 positions Traverse path in pendulum mode per work area: 1,250 mm MACHINE DETAILS Control: Siemens 840D solution line Machine weight: 9,600 kg EQUIPMENT 24-position tool magazine Coolant system 900 l High-pressure system 30 bar Internal coolant supply tools Chip conveyor Hydraulic unit 200 bar 6 hydraulic connections for 200 bar 2 connector couplings A+B (3 per table side) Variable Chiron clamping logic Prosin Plus tool breakage monitoring for diameters > 3 mm Automatically opening and closing loading door Machine preparation for 1 x NC axis

Condition: used, Year of construction: 2014, x-travel 2000 mm Bjdpfx Aasyan Rcj Ejwi y-travel 630 mm z-travel 550 mm Control Siemens 840 D total power requirement 7,5 - 22,5 kW weight of the machine ca. 10,5 t Maximum table load:1,000 kg / m table length Movement range: X-axis:2000 mm Y-axis:630 mm Z-axis:550 mm Speed range up to:12,000 min-1 Maximum speed range:140 Nm Drilling power:average 42 mm (with insert drill) Milling power:600 cm³/min Tool places:24 Tool shaft:HSK A 63 DIN 69893 Tool average:max. 75 mm Tool average with: free neighbouring places:max. 160 mm Tool length:max. 320 mm Tool weight:max. 8 kg (max. magazine load 100 kg Tool change time:approx. 1.5 s (depending on control

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: n/a, number of axes: 4, This 3-axis CHIRON Mill 6000 SK was manufactured in 2004, featuring a high-speed motor spindle at 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It includes a 5-axis milling package, 92 tool positions, and a Marposs collision monitoring system. Ideal for long part machining up to 6,000 mm and pendulum machining. If you are looking to get high-quality milling capabilities consider the CHIRON Mill 6000 SK machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • 92 tool positions hsk-a63 (background magazine) • Long part machining up to a maximum of 6000 mm • Machining of the end face (5th side) horizontally with swivel head (right/left) • Pendulum machining via center partition, max. Workpiece length 1773 mm with sk machining on both end faces (tool length 120 mm) • 4 hydraulic double vices (fixed center jaw) per pendulum section, positioning, and clamping via linear system (hydraulic release, mechanical clamping) Extra Information Bwedpfox Nr Irox Aa Eoi Additional Equipment High-speed package with Motor Spindle: 12000 rpm, 140 Nm Production Package: Scraper belt conveyor, discharge height 1050 mm Internal coolant preparation KNOLL VRF250 vacuum rotary filter (suitable for steel, cast iron, aluminum, plastic, brass) High pressure 70 bar with HP pump and variable valve Flushing gun per pendulum field Emulsion mist extraction, 2 fans each 800 m²/h Rotating viewing window left and right (1400 mm from machine center) Automatic loading doors Center partition for pendulum machining 5-Axis Milling Package Air Blast Tool Life Monitoring Additional V24 RS232 in the control cabinet BDE/MDE interface (statuses: machine on, machine running, part counter) Marposs (Brankamp) CMS100 Collision Monitoring System 3D machine model for kinematic simulation in the CAM programming system 210 bar hydraulic power unit, 2 clamping circuits, separate system clamping pressure for each pendulum field, clamping pressure control KOHN linear clamping system 8 KOHN Multi 2000 MFS 125/680 HD hydraulic vices Two-part operator step across the entire operating width of 6000 mm With the 3 axes x, y, z and the swivel head, the software package 5-axis milling can be used to mill shapes, e.g. a curve. The software then synchronizes the axes.

Condition: good (used), Year of construction: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and a tool magazine. Features include a CRT screen and a classic push-button keyboard. 3. Electrical parameters (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not specified, but typically Fanuc 110/220 V → transformer) Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine construction Vertical CNC machining center (milling machine) with a fully enclosed housing. Worktable with grid of holes for mounting workpieces. Carousel tool magazine (visible in the photo) – most often 12, 20, or 24 tools (depending on version). Automatic tool changer (ATC). Z-axis operates vertically (guideway assembly and telescopic way covers visible). 5. Typical technical data (for Chiron FZ 12/15 machines from this period) (values may differ depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500 – 700 / 400 / 400 mm Table surface: 800 × 400 mm (example) Table load: 200 – 300 kg Spindle speed: 20 – 6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5 – 15 kW (depending on version) Tool magazine: 12 – 24 tools Positioning accuracy: ±0.005 mm Rapid traverse: 30 m/min (X/Y/Z axes) 6. Application Metalworking (steel, aluminum, cast iron, light alloys). 📌 General information: • Manufacturer: CHIRON, Germany • Type: CNC machining center • Control: as seen in the photo (Fanuc Series 0-M) • Automatic tool changer • Heavy-duty worktable with workpiece clamping options • Solid industrial construction 📌 Machine condition: • Used machine, in good condition • Regularly serviced • Shows normal signs of use • Fully functional 📌 Application: • High-precision milling Bwedow Uab Ajpfx Aa Eoi • Machining of metal components • Single-part and batch production

Condition: used, Year of construction: 2017, x-travel 550 mm y-travel 400 mm Bwjdpfxoxzk N Aj Aa Eei z-travel 400 mm weight of the machine ca. 9000 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 14,000 h, Chiron Mill FX 800 machining center with 148-position background magazine TECHNICAL DATA Travel, X-axis: 800 mm Travel, Y-axis: 630 mm Travel, Z-axis: 550 mm Swivel axis: +- 120 ° Rotary axis: 360° Rapid traverse speed, X-axis: 60 m/min Rapid traverse speed, Y-axis: 60 m/min Rapid traverse speed, Z-axis: 60 m/min Spindle, max. torque: 180 Nm Spindle power: 17.0 - 47.2 kW Spindle, speed: 12`000 rpm Tool holder: HSK-A 63 Rotary table, diameter: 280 mm Thread and fitting hole pattern M16 x 15 H7 X 50 Load capacity: 320 kg SCOPE OF OFFER U.A: (list not exhaustive): Bwodpfxjtvz Azj Aa Eji Chiron machining center, Year of construction: 2015 Knoll chip conveyor 750 K-1/150 BMF TPF 350S high-pressure pump Renishaw RLP40Q touch probe Receiver: Renishaw RMI-Q Mechatronic flow sensor SB0500 Background magazine, 148-fold Operating documentation Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 498-56, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, No reserve price – guaranteed sale to the highest bidder! Bodpexm Tbfsfx Aa Ejwi The machine spindle has been replaced and has zero spindle hours! Payment is due one week after purchase of the machine! Placing a bid obligates the buyer to collect the machine within the specified period between 17.11.2025 and 21.11.2025! TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 550 mm Travel Z-axis: 550 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Number of tool stations: 40 Table dimensions: 850 x 350 mm MACHINE DETAILS Control: Siemens Sinumerik 840 D Dimensions & Weight Dimensions (L x W x H): 5,500 x 3,700 x 2,900 mm Total weight: 10,000 kg EQUIPMENT KNOLL chip conveyor KNOLL paper band filtration system SCHUNK zero-point clamping system Tool holders and tools located on the tool changer Probe

Condition: excellent (used), Year of construction: 2005, operating hours: 71,034 h, functionality: fully functional, High-quality 5-axis machining center CHIRON MILL 2000 immediately available. Including rotary table. The machine has a particularly demanding maintenance history and operated in a two-shift system. X / Y / Z travel: 2,000 / 500 / 550 mm Max. pendulum operation: 2 × 750 mm Bsdpfx Aasxiwf He Eowi Rapid traverse: 40 m/min Feed force X/Y: 5,000 N Feed force Z: 10,000 N Working area with NC-swivel head B-axis ±100° Resolution: 0.001° Repeatability: ±10'' Drive torque: 280 Nm Clamping holding torque: 1,400 Nm Travel X: 2,000 mm Travel Y: 480 mm Travel Z vertical/horizontal: 630 / 715 mm Distance spindle taper – swivel axis: 185 mm Distance spindle taper – table surface: 90 mm Distance spindle axis – table surface: 190 mm Distance reference point – table center: 230 mm Distance table center – end of travel: 250 mm Spindle Tool holder: HSK 63 Power: 22 kW Speed range: 20–12,000 rpm Max. torque: 140 Nm Front spindle bearing Ø: 70 mm Tool clamping force: 6,500 N Projection spindle to cover: 220–720 mm Distance spindle taper – table surface: 90–640 mm Tool system Tool stations: 20 (option 40) Max. tool Ø: 75 mm Max. tool Ø with free adjacent positions: 125 mm Max. tool length: 280 mm Max. tool weight: 8 kg Tool change time: 1.5 s Chip-to-chip time: 5 s Machining capacity Drilling capacity in ST60 (carbide): 42 mm Tapping: M30 Milling capacity in ST60: 600 cm³/min Clamping area / base table Length: 2,600 mm Width: 550 mm T-slots: 2 × 18 H12 Reference slot: 18 H8 Table height: 900 mm Supply / Dimensions Coolant tank: 200 l Total power consumption: 20 kVA Machine weight approx.: 9.5 t Compressed air connection: 6 bar Total length: 5,159 mm Cabin width: 2,495 mm Overall height: 2,500 mm Control panel width: 2,870 mm Control panel height: 1,830 mm Option High-Speed Package Rapid traverse: 60 m/min Chip-to-chip time: approx. 4 s Tool stations: 40 Y travel: 630 mm Accessories: No tools or tool holders included. Mecatool included. Clamping devices and fixturing system only available upon separate request.

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, Chiron MILL 2000 Machining Center For sale is a Chiron MILL 2000 machining center from 2006. The machine is in good condition and ideally suited for the machining of large and long workpieces. Bodpfxsxcpy Ne Aa Eowi Manufacturer: Chiron Model: Mill 2000 Year of manufacture: 2006 Technical specifications: • Travel: X 2000 mm / Y 500 mm / Z 550 mm • Spindle: 12,000 rpm HSK 63 • NC swivel head • Tool magazine: 40 positions (chain magazine) • Control: Siemens • Machine weight: approx. 9,600 kg Equipment: • 40-position tool magazine • Chip conveyor and coolant system • NC swivel head • High-pressure system Condition & Service: The machine is fully operational and available immediately. Loading and transport can be arranged. Location: Germany (Stuttgart area) Price: negotiable

Condition: good (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, Chiron Mill 6000 / 2013, completely overhauled by Chiron. Year of manufacture: 2004 / overhauled in 2013. Equipped with Siemens 840D control system. Travel X/Y: 6000/630 mm. Pendulum machining possible. 92-position tool changer. HSK-A 63 tool holder. Spindle speed up to 12,000 rpm. Spindle replaced in 2021. NC swivel milling head. Hydraulic unit with 210 bar. 2 hydraulic clamping circuits. Separate clamping pressure control per pendulum field. Clamping pressure monitoring. Pneumatic workpiece stop. 2 separately controllable pneumatic lifting devices. Brankamp collision monitoring system. Scraper belt conveyor. OKZ prepared. Knoll vacuum rotation filter. Rotating viewing window. Automatic loading doors. 5-axis milling package. IKZ 70 bar (internal coolant supply at 70 bar). Oil mist extraction. Pendulum machining possible. Pendulum machining X-axis travel: 1773 mm with face machining (tool length: 120 mm). Linear clamping system with 8 vices. Bsdpsw N Nvfefx Aa Eewi

Condition: excellent (used), CHIRON DZ 18.2 KW, YOM 2012 Control: Fanuc 31i Path: X / Y / Z 630 x 520 x 400 mm, Pallet changer 2x 940 x 470 mm, Bwedpfxeuviiwe Aa Eji 2 spindles Spindle distance 320 mm, 2×32-fold tool changer SK40 tool Max. Spindle rotation 10,000 rpm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 231-26, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 950 mm, table length: 1,200 mm, rotational speed (max.): 10,000 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Siemens Sinumerik 840 D X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Spindle Spindle speed per spindle: 10,000 rpm Tool holder: HSK 63 Tool changer per spindle: 10-station Table Clamping area: 1,200 × 950 mm MACHINE DETAILS Dimensions: 5.0 x 4.0 x 2.8 m Bodjwd Sd Njpfx Aa Ejwi Weight: 8.5 t Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 63 A Connected load: 41 kVA EQUIPMENT - Coolant system from KNOLL - Chip conveyor from KNOLL - Machine vises not included. Transportation on a standard truck is possible.

Year of construction: 1962, condition: good (used), machine/vehicle number: 162487, Suction capacity: 50 l/min Max. operating pressure: 10 bar Compressor speed: 1400 rpm Bwedpfx Aaodyp R Ro Esi Boiler: Operating pressure: 10 bar Capacity: 50 l

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: B02208348000, travel distance X-axis: 2,000 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 92, TECHNICAL DETAILS Travel Paths X-axis travel: 2,000 mm Y-axis travel: 610 mm Z-axis travel: 630 mm Tool Magazine Positions: 92 Performance Data Axis acceleration: up to 17 m/s² Rapid traverse: up to 75 m/min Bodpfsw Nhxxox Aa Eowi Spindle Specifications Torque: up to 280 Nm for heavy-duty machining Speed: up to 20,000 rpm for aluminum parts MACHINE DETAILS CNC control: Siemens 840 D EQUIPMENT Direct drives for rotary axes NC swivel head Hydraulically optimized clamping devices Note: The machine is currently not under power. An inspection under power can be arranged upon request.