Used Casadei Xenia 40 for sale (67)

Condition: new, CASADEI XENIA 40 panel saw - Exhibition machine - Pre-scoring unit, pivotable, parallel stop with fine adjustment, outrigger table ----- Technical data ----- Edging length: 3,200 mm, max. cutting height at 90/45°: 140 /97 mm, cutting width with parallel stop: 1,270 mm, saw blade swivel: 90 - 45 °, max. saw blade Ø: 400 mm, pre-scoring saw blade Ø: 120 mm, speeds: 3,700 rpm, speeds of pre-scoring saw blade: 8,500 rpm, motor 400 V: 7.0 kW, Njlsvtmzcjhcdwzekw motor of pre-scoring motor: 0.9 kW, extraction nozzle Ø: each 1 x 120 / 80 mm, Weight: 661 kg - new exhibition machine -

Condition: new, Year of construction: 2024, machine/vehicle number: MR005848, This machine is manually adjustable in height and angle. Price is ready to use, with cord, plug and saw blades, af hine is equipped with the following options: - Motor power 9kW (S6) with automatic star-delta switch - Additional clap stop on the cross guide Technical specifications: - Maximum cutting length on roller carriage: 3200 mm - Maximum cutting width to parallel guide: 1270 mm - Maximum saw blade diameter: 400 mm - Saw blade tilt adjustable: 0-45 ° - Maximum cutting height (90 degrees): 140 mm Nslhovzl Spocdwzjkw - Maximum cutting height (45 degrees): 99 mm - Saw blade speed: 3700 /min - Scoring unit present: Yes - Scoring drive: Separate motor - Scoring saw blade diameter: 120 mm - Saw unit adjustment: Manual - Parallel guide adjustment: Manual - Motor power: 9.5 hp - Serial number : AB00030094

Condition: new, Year of construction: 2023, Carriage length: 3200 mm Cutting width at rip fence: 1270 mm Cutting width at the cross-cut fence: 3200 mm Max. Cutting height 90°: 140 mm Max. Cutting height 45°: 99 mm Scorer: yes Saw blade height adjustment: motorized Swivel adjustment saw blade: motorized Parallel fence adjustment: motorized Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Cutting ruler display: Scale Saw blade diameter: 400 mm Speeds: 3000 - 4000 - 5000 rpm Motor power: 7.0 kW Motor brake: yes / automatic Suction nozzle diameter: 80 mm / 120 mm Machine length: 3600 mm Machine width: 1900 mm weight: 1600 kg Nkjlhcol D Rxxedwzjw

Year of construction: 2014, Condition: as good as new (ex-display), Exhibition machine Year of manufacture 2014 Cutting length 2600 mm Cutting width 1270 mm Cutting height at 90° = 130 mm Height adjustment electromotive saw blade diameter 400 mm swivel adjustment 0 - 45° electromotive motor 7 kW speeds 3000/4000/5000 rpm Control: display with separate keyboard swiveling control panel at eye level USB interface 300 programming memory locations electronic position display at the parallel fence Nelhcdwjkwha Eezjkw cross section frame with parallelogram -manual adjustment -angle adjustment +50 -50° with digital display -length and angle measurement automatic star-delta switch Original price 25950.- Availability: short term Location: Switzerland

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 200 mm Scorer: yes Height adjustment saw blade: motorized Pivot adjustment saw blade: motorized Width stop adjustment: manual Nelokuzd Hehcdwzekw Display saw blade angle: digital Display cutting height: digital Display width stop: scale Display cutting ruler: scale Saw blade diameter: 550mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7,5 kW Motor brake: yes / automatic Suction connection: 100mm and 120mm machine length: 3600mm Machine width: 2000mm Weight: 1000kg

Condition: new, Year of construction: 2024, cutting length (max.): 3,200 mm, cutting width (max.): 1,270 mm, cutting height with scoring (max.): 136 mm, saw blade diameter: 400 mm, Adjustment saw Casadei / SCM. Precision machine from well-known Casadei / SCM type SC40P. CE approved. New machine, year 2024. Saw height 136mm. 400mm blade. Equipped with separate drawing motor. Saw length 3200mm x splitting width 1270mm. Electric raise/lower and tilt 45 degrees with digital display. Digital cleavage hold. 9.5hp engine with automatic y/d start. Overhead saw guard. Perfect to also split planks and joists with. Very easy to work professional machine. Powerful saw from well-known Casadei / SCM. Immediate delivery! We arrange transport on europe. Njlhcdeuh Stzowzekw

Condition: used, Year of construction: 1998, SECOND-HAND CIRCULAR SAW CASADEI MOD. KS 3400 - CE RULES - Carriage mm. 3400 - KW 7.5 Nolhcderwxqyjwzekw - SN 98-36-014 - Year 1998

Condition: used, Year of construction: 2008, Used machine Nslhcev Tfx Todwzjkw Year of manufacture: 2008 PVC edge thickness: 0.4 - 2.0 mm Panel thickness: 10-45 mm Cutting from roll Automatic cutting unit Flush trimming unit for flush and radius trimming r = 2 mm Motor: 0.37 kW - 9000 rpm Extraction connection: 2 x 60 mm Heating power: approx. 1150 W Total power: 2 kW Weight: approx. 240 kg Dimensions: 2040 x 1240 x 1260 mm Availability: approx. May 2025 Location: Hesse

Condition: used, Year of construction: 2006, Spindle moulder, milling machine Casadei F222L Nolsv Rdqvohcdwzekw Spindle diameter: 50mm Tiltable 45 degrees. Serial number: 06T3001 Weight: 891 kg 10 KW 400 V Including Maggi feeder - Year: 2006 - Documentation available: No - CE mark available: Yes - Serial number: 06T3001 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2022, Working width: 520 mm Planer block: Tersa Number of knives: 4 Planing table length: 2300 mm Planing stop angle adjustable: yes Planing table folding: pneumatic Maximum thickness throughput of thicknesser: 250 mm Thicknessing table height adjustment: electric Planing thickness display: digital Feed speed: 5/8/12/18 m/min Njlhcdwjiuldyezekw Infeed roller: steel Outfeed roller: rubber Pressure beam: articulated Table rollers: no Motor power: 7 kW Motor brake: yes, automatic Extraction connection: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 g

Condition: used, -Large dressing tables made of gray cast iron -The dressing table is adjusted via a precise parallelogram system parallelogram system, so that in every adjustment position, the distance between the table tips and the to the cutterhead remains the same -The large, stable dressing fence made of anodized aluminium aluminum is easy to move and can be tilted from 0° - 45 tiltable -The inclination of the fence can be read from the workstation readable from the workplace -With auxiliary fence as standard -Large four-blade shaft, precision bearings -Smooth running due to precision unit and thanks to the heavy heavy cast iron design -Powerful industrial motor -Highest possible user safety with simple operation operation -Display for chip removal via scale -Manual table adjustment -Motor protection switch Equipment details Incl. fold-down auxiliary fence for narrow workpieces workpieces -Manual quick adjustment of chip removal with scale & clamping turning head The protective device -The safety guard can be folded down and has been designed designed in such a way that the operator is not hindered and protected at the same time TERSA models with Tersa planer blade shaft system -No more adjusting and screwing -Plane blade change in seconds -Self-locking -Extremely quiet -Perfect planing result Dimensions and weights: - Length (product) approx.: 2750 mm - Width/depth (product) approx.: 1500 mm - Weight (net) approx.: 680 kg Jointer: - Total length of the tables: 2720 mm - Feeding table length: 1498 mm - Max. chip removal for planer: 8 mm - Dressing fence length: 1200 mm Nslhcdweu T Hrcozjkw - Dressing fence height: 190 mm - Swivel range of dressing fence: 90 - 45 ° Suction connection: - Suction nozzle diameter Thickness: 120 mm Installation information: - Space required Length: 2750 mm - Space requirement width/depth: 1604 mm - Explanation of space requirement: The dimensions take into account maximum travel distances or effective lengths. Electrical data: - Drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planing cutterblock: - Planer shaft type: TERSA - Planer shaft diameter: 120 mm - Number of planing knives: 4 pcs - Planing shaft speed: 5000 min¯¹ - Planing width max.: 520 mm

Condition: good (used), Functionality: fully functional, Casadei F115 milling machine Tischfras Moulder Axis 30mm Adjustable height Five rotational speeds Clockwise and anti-clockwise rotation Motor brake Feeder Sliding table Fine adjustment milling stop Shims and end nut included Forklift available Test run is possible Address: Esweg 6, 7625SV Zenderen Nkoleuvi Rvohcdwzsw

Condition: excellent (used), Table height adjustment by means of 4 steel screws Front feed roller - spiral, steel Rear steel roller covered with rubber Nsloupz N Aohcdwzskw Automatic motor brake 7 kW motor Working width 520 mm Shaft diameter 120 mm - 4 knives Plane height 30 cm

Condition: new, Year of construction: 2021, New machine Year of manufacture: 2021 Equipment and technical data: Dimensions and weights Length (product) ca. 1170mm Weight (net) approx. 660kg width/depth (product) ca. 1003mm Connection suction Suction port diameter thickness 150mm Installation information Space requirement length 1170mm Machine body width/depth 705mm Space requirement width/depth 1003mm Working area length 1000mm Space requirement height 1197mm Working area width/depth 2000mm Nolhcjkwg Unodwzskw Explanation of space requirement The dimensions take into account maximum travels or useful clearance to working area. Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Machine body length 1170mm Thickness Thickness table length 520mm Working height thickness max. 250mm Thickness table width 1000mm working length thickness min. 210mm Working height thickness min. 3.5mm Chip removal max. thickness 8mm Electrical data Power drive motor 7,5kW Mains frequency 50Hz Supply voltage 400V Planer shaft type TERSA Planer shaft speed 4500min¯¹ Planing shaft diameter: 120mm max. planing width: 520mm Number of planing knives: 4pcs. Feeding speed: 5/8/12/18m/min Location: Hochheim Availability: Short term

Condition: new, Year of construction: 2025, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Nkelhcdwjcr S Ecozsw Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price

Condition: used, -Sturdy cast steel construction -Large, ribbed dressing tables made of gray cast iron -Smooth running due to high dead weight -Four feed speeds -Motorized thicknessing table stroke with two speeds and digital display -Link pressure beam in the infeed Precision bearing-mounted four-blade shaft, Helical-toothed steel infeed roller for particularly even and gentle wood feed Pull-out roller with rubber coating -Large planing fence, tiltable 90 to +45° -With auxiliary fence as standard -Powerful industrial motor -Pneumatic quick changeover system with pneumatic lifting and lifting and lowering of the dressing table -The connection position of the suction unit can be the same position for both planing and thicknessing the same position, so there is no need for an additional extraction hose or cumbersome repositioning and routing around the around the machine is necessary Dimensions and weights: - Length (product) approx.: 2300 mm - Width/depth (product) approx.: 1100 mm - Weight (net) approx.: 980 kg Jointer: - Total length of the tables: 2300 mm - Feed table length: 1200 mm - Working height: 930 mm - Max. chip removal: 6 mm - Dressing fence length: 1200 mm - Dressing fence height: 190 mm - Swivel range of dressing fence: 90 - 45 ° Suction connection: - Suction nozzle diameter Thickness: 120 mm Nslsu T Hq Sohcdwzokw Installation information: - Space required Length: 2300 mm - Space requirement width/depth: 1610 mm - Explanation of space requirement: The dimensions take into account maximum travel distances or effective lengths. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Explanation of working area: Please add the specified dimensions please add the space requirement to the specified dimensions to calculate the the recommended free installation area for the machine. for the machine. Thickness: - Working height Thickness min.: 3.5 mm - Max. working height thickness: 250 mm - Chip removal max. thickness: 8 mm Electrical data: - Drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planing cutterblock: - Planer shaft type: TERSA - Planer shaft diameter: 120 mm - Number of planing knives: 4 pcs - Planing shaft speed: 5000 min¯¹ - Max. planing width: 520 mm Feed rate: - Feed speed: 5/8/12/18 m/min

Condition: new, Year of construction: 2024, New machine Year of construction 2023 Length approx.: 2300 mm Width/depth approx.: 1100 mm Weight approx.: 980 kg Total length of the tables: 2300 mm Feed table length: 1200 mm Working height: 930 mm Max. chip removal: 6 mm Fence length: 1200 mm Fence height: 190 mm Swivel range of dressing fence: 90 - 45 ° Suction nozzle diameter thickness: 120 mm Main motor: 7 kW Space requirement length: 2300 mm Space requirement width/depth: 1610 mm Explanation of space requirement: The dimensions take into account maximum travel distances or effective lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Njlhcjr Ax E Iodwzekw Width: 3500 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Max. working height: 250 mm Max. chip removal: 8 mm Supply voltage: 400 V Phase(s): 3 Ph Type of current: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planing knives: 4 pcs Speed: 5000 min¯¹ Planing width max.: 520 mm Speed: 5/8/12/18 m/min Availability: short term Storage location: Solingen

Condition: new, Year of construction: 2025, Motorized thickness table hub with two speeds Numerical display for working height Thicknessing table in cast iron The thicknessing table is supported by four large trapezoidal thread spindles for maximum stability and precision Four speeds Optional with two roles in the thicknessing table Equipped with noise and chip protection curtain at the factory Tueckein and outlet Adjustable roll pressure Front feed roller with helical gearing Pull-out roller with rubber coating Powerful industrial motor Equipment details Models TERSA with Tersa Planer knife shaft Nkjlhcdwed Hx E Iezew Planer blades change in seconds When starting the machine, the blades are automatically tensioned - self-arretierend by the centrifugal force The knife protrusion will automatically without the use of setting gauges Work table The working table is supported by four large trapezoidal screw spindles provide greatest stability under all operating conditions As standard with electric table adjustment The Special lifting device correctly maintain the table position, also without lock Helical steel feed rollers for a constant and uniform wood feeding Second, rubber feed roller in the spout Massive arrestors prevent kickback of workpieces A 4-meter shaft ensures an optimal planing image Dimensions and weights Length approx. 1170 mm Width/depth approx. 1003 mm Weight approx. 660 kg Connect dust extraction

Condition: used, -Motorized thicknessing table lift with two speeds -Numerical display for working height -Cast iron thicknessing table -The thicknessing table is mounted on four large trapezoidal threaded spindles for maximum stability and precision. stability and precision -Four feed speeds -Optionally with two rollers in the thicknessing table -With noise protection and chip protection curtain as standard at the workpiece infeed and outfeed -Adjustable roller contact pressure -Front feed roller with helical teeth Pull-out roller with rubber coating -Powerful industrial motor Dimensions and weights: - Length (product) approx.: 1305 mm - Width/depth (product) approx.: 1080 mm - Weight (net) approx.: 750 kg Suction connection: - Extraction nozzle diameter thickness: 150 mm Installation information: - Space required Length: 1305 mm - Space required width/depth: 1080 mm - Space requirement height: 1197 mm - Explanation of space requirement: The dimensions take into account maximum travel distances or effective lengths. - Machine body length: 1305 mm - Machine body width/depth: 725 mm - Working area length: 1000 mm - Working area width/depth: 2000 mm - Explanation of working area: Please add the specified dimensions please add the space requirement to the specified dimensions to calculate the the recommended free installation area for the machine. for the machine. Thickness: - Thicknessing table length: 630 mm - Thicknessing table width: 1000 mm - Working height thickness min.: 3.5 mm - Working height thickness max.: 300 mm - Working length thickness min.: 210 mm - Chip removal max. thickness: 8 mm Electrical data: - Drive motor power: 9 kW Nelou T Hq Ejhcdwzekw - Supply voltage: 400 V - Mains frequency: 50 Hz Planing cutterblock: - Planer shaft type: TERSA - Planer shaft diameter: 120 mm - Number of planing knives: 4 pcs - Planer shaft speed: 4500 min¯¹ - Max. planing width: 630 mm Feed rate: - Feed speed: 5/8/12/18 m/min

Condition: used, Year of construction: 2021, Used machine Year of manufacture 2021 As good as new Equipment and technical specifications: Nkslhcdjruuhyewzsw Total table length 2720mm Task table length 1498mm Maximum chip removal 8mm Joining stop length 1200mm Joining stop height 190mm Joining stop swivel range 90° - 45° Extraction connection: Extraction nozzle diameter thickness 120mm Installation information: Space required length 2750mm Space required width/depth 1604mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Electrical Data: Drive motor power: 7 kW Connection voltage: 400 V Line frequency: 50 Hz Planer block Planer block type: TERSA Planer block diameter: 120 mm Number of planer blades: 4 Planer block speed: 5000 rpm Planing width: max. 520 mm Dimensions and weights: Length: approx. 2750 mm Width/depth: approx. 1500 mm Weight: approx. 720 kg Availability: Short-term Storage location: Flörsheim

Condition: new, Year of construction: 2025, Motorized thicknessing table stroke with two speeds Numerical display for working height Grey cast iron thicknessing table The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Noise and chip protection curtain at workpiece infeed and outfeed as standard Adjustable roller contact pressure Front infeed roller with helical toothing Pull-out roller with rubber coating Powerful industrial engine Equipment details Models TERSA with Tersa planer blade shaft Planer blade change in seconds When the machine is started, the planing knives are automatically clamped by centrifugal force - self-locking The blade projection adjusts automatically without using setting gauges Nkjlhcdwsff Efaozjw Work table The work table is supported on four large trapezoidal threaded spindles, which ensure maximum stability in all working conditions With electrical table adjustment as standard Due to the special lifting device, the table position is maintained even without locking Helical toothed steel feed rollers for a constant and even wood feed second, rubberized feed roller at the outlet Massive recoil protectors prevent the recoil of workpieces A 4-knife shaft ensures an optimal planing pattern Dimensions and weights Length approx. 1305 mm width/depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter thickness 150 m

Condition: used, -Sturdy cast steel construction -Dynamically balanced milling unit anchored to the worktable anchored -Particularly robust design -Smooth running due to precision units and high weight own weight -With right/left rotation as standard and electronic blocking when changing direction -Five speeds from 3000 - 10000 min¯¹ -The speed can be changed easily and conveniently from the from the machine side -With MK 4 interchangeable spindle system as standard -Large cast iron work table for lasting precision Nslhcdwsu T Hhkezekw precision -Easy handling thanks to operating elements and speed speed display on the front of the machine -Large dimensioned routing fence with fine adjustment and aluminum fence jaws as standard -Adjustment of the fence via crank handle -Numerical display of the set spindle height, accurate to tenths -Powerful industrial motors Dimensions and weights: - Weight (net) approx.: 510 kg Suction connection: - Suction nozzle diameter stop: 1 x 120 mm - Suction nozzle diameter machine: 2 x 80 mm Work table: - Worktable length: 2500 mm - Worktable width: 810 mm - Table height: 923 mm Installation information: - Explanation of space requirements: The dimensions take into account maximum travel distances or usable lengths. - Working area length: 3700 mm - Working area width/depth: 5000 mm - Explanation of working area: Please add the specified dimensions Please add the space requirement to the dimensions given to calculate the the recommended free installation area for the machine. for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, Adjustment from the front via crank handle with numerical digital display - Arched routing guard - Height adjustment of the spindle: manual - Spindle tilt adjustment: manual - Control: manual height and tilt manual height and tilt adjustment of the milling unit - Position of the control elements: on the machine body - Table design: table extension left and right and extendable workpiece support (total width 2500 mm) Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling spindle: - Spindle inclination: -45 to +45 ° - Effective length of the spindle: 140 / 180 mm - Explanation of usable spindle length: for spindle Ø 30 - 35 / for spindle Ø 40 - 50 mm - Milling spindle stroke: 90 mm - Interchangeable spindle: MK 4 - Spindle speed(s): 3000/4500/6000/ 8000/10000 min¯¹ Max. milling tool diameter: - Tool diameter max. lowerable: 320 x 60 mm - Tool diameter max. profile milling: 250 mm - Tool diameter max. tenoning: 350 mm - Tool diameter max. form milling: 160 mm

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Length approx.: 2300 mm Width/depth approx.: 1100 mm Weight approx.: 980 kg Total length of the tables: 2300 mm Feed table length: 1200 mm Working height: 930 mm Max. chip removal: 6 mm Fence length: 1200 mm Fence height: 190 mm Swivel range of dressing fence: 90 - 45 ° Suction nozzle diameter thickness: 120 mm Main motor: 7 kW Space requirement length: 2300 mm Space requirement width/depth: 1610 mm Explanation of space requirement: The dimensions take into account maximum travel distances or effective lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Nksljrq N Eaehcdwzow Length: 1000 mm Width: 3500 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Max. working height: 250 mm Max. chip removal: 8 mm Supply voltage: 400 V Phase(s): 3 Ph Type of current: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planing knives: 4 pcs Speed: 5000 min¯¹ Planing width max.: 520 mm Speed: 5/8/12/18 m/min Availability: short term Storage location: Solingen

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - table milling machine with tilting milling spindle and table extensions Table milling machine with tiltable milling spindle from -45° to +45 Nkslhcdedqzcxowzjw Sturdy cast steel construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running due to precision aggregates and high dead weight Standard with right-left rotation and electronic blocking when changing direction 5 speeds from 3000 - 10000 min-1 Speed change is easy and convenient from the machine side Standard with MK 4 change spindle system Large work table made of cast iron for long-lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence jaws as standard equipment Powerful industrial motors Equipment details: Fraes fence Fraes fence with crank/handwheel adjustment from the front side With numerical display Interchangeable spindle Interchangeable spindle MK 4 standard on all CASADEI F 23 and F 25 models Option sliding carriage Option sliding carriage for small tenoning operations and for slotting Scope of delivery: Manual tiltable milling spindle from +45° to -45°. Speed indication via LED at the front Aluminum stop jaws Sheet milling protection cover Right-left rotation of the milling spindle MK 4 interchangeable milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display table extension left and right (2500 mm length) extendable workpiece support (2500 mm length) Model CASADEI F 25 LL FK article no. 5220728 Technical data Dimensions work table 2500 x 810 mm Milling spindle tilting range +45 to -45 degrees useful length of spindle at Ø 30-35 mm 140 mm useful length of spindle at Ø 40-50 mm 180 mm milling spindle stroke 90 mm max. tool Ø profiling 250 mm max. tenon tool Ø 350 mm max. milling tool Ø 160 mm max. tool-Ø lowerable 320 x 60 mm speeds, 5-stage 3000/4500/6000/ 8000/10000 min¯¹ motor power 400 V / 50 Hz / S6-40% 7 kW weight 480 kg suction nozzle-Ø stop 1 x 120 mm suction nozzle-Ø under table 2 x 80 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Large dressing tables made of grey cast iron The dressing table is adjusted via a precise parallelogram system so that the distance between the table tips and the cutter head remains the same in every adjustment position The large, stable dressing fence made of anodised aluminium is easy to move and can be tilted from 0° - 45 The inclination of the fence can be read from the workstation With auxiliary stop as standard Large four-blade shaft, precision bearing Smooth running due to precision unit and thanks to the heavy cast iron design Powerful industrial engine Highest possible user safety with simplest operation Nkelsff Efcjhcdwzew Display for chip removal via scale Manual table adjustment Motor protection switch Equipment details incl. fold-down auxiliary stop for narrow workpieces Manual quick adjustment of the chip removal with scale & clamping head The protection device The safety guard is foldable and designed to protect the operator without obstructing the work Models TERSA with Tersa planer knife shaft system No more adjusting and screwing Planer knife change in seconds Self locking Especially low noise Perfect planing result Dimensions and weights Length approx. 2750 mm width/depth approx. 1500 mm Weight approx. 680 kg Dresser Total length of the tables 2720 mm Feed table length 1498 mm Chip removal max. 8 mm Stop length 1200 mm Stop height 190 mm Swivel range of dressing stop 90 - 45 ° Dust extraction connection Suction nozzle diameter Thickness