Used Cartoon Tray for sale (6,704)

Condition: used, Year of construction: 2008, machine/vehicle number: FA55, Machine OverviewThe ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation.Operating mode: AutomaticInfeed layout: Straight infeed (inline)speed: 1500 Paks/hour (PPH) Packaging: Tray wrap with neutral film overwrapFormat range: 0.5 L – 10 LMachine configuration: Delivered without container infeed system (to be provided by the line)Year of manufacture: 2008; Overhauled: 2022Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing.Key Technical DataModel: COMBIGIOTTO 90-MBrand: ATLANTAOperating condition: Ready for operationPackage configuration: Wrap + film on trayFilm type: NeutralTray: Available (tray packaging configuration)Machine feed type: Straight (inline)Format capability: 0.5 L to 10 L containersYear: 2008 (overhauled 2022)Automation & ControlIndustrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability).Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application.Integrated diagnostics, alarm history and counters (shift/lot totals).Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status.Electrical protection degree: IP54 for the electrical system and motors.Line IntegrationContainer infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator).Inline design simplifies alignment with fillers, labellers and downstream conveying.Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration.Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering).Condition & MaintenanceOverall status: Ready for operation.Overhaul completed in 2022 to restore full functionality.Preventive maintenance recommended: periodic inspection of film path and sealing elements, collation guides, tray magazine mechanisms, and conveyor chains/belts.Documentation and spare parts recommendations can be provided during commissioning and FAT/SAT... Bwedpfsxdnbzsx Ahyon

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total length: 13,000 mm, total width: 1,200 mm, total height: 2,600 mm, Rack for storing and drying sheets of paper printed using screen printing. Paper size: 500x700mm. Bodpfsza Syhjx Ahyswn

Condition: excellent (used), The Tramper D-360 trays dispenser is a reliable and compact machine designed to automate the packaging process in the food industry. The device feeds trays to the packaging line quickly and precisely, increasing efficiency and reducing manual labor. It is ideal for plants producing ready meals, meat, fish, cheese, and other products that require tray packaging. Technical data: Producent: Tramper Technology Model: D-360 Project number: T99278 Year of manufacture: 2013 Main power supply: 400 VAC Control: 24 VDC Air supply: 6 bar Tray dimensions: 227 x 178 mm Weight: 160 kg Construction: stainless steel – suitable for hygienic environments ✅ Key advantages: Bodpjwmn Amefx Ahyjwn Automatic tray feeding – smooth integration with tray sealers and packaging machines Compact design – saves space on the production line Simple and intuitive operation – easy adjustment to different tray formats Compliance with sanitary standards – ideal for the food industry High reliability – proven Tramper brand quality Easy installation and maintenance – design engineered for everyday use The Tramper D-360 perfectly supports the automation of the packaging process, reducing downtime and increasing line efficiency. It is the ideal solution for manufacturers looking for a proven and efficient tray feeding system.

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, warranty duration: 12 months, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head Bsdpfxsyycqxj Ahyjwn • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: good (used), Lifting system, Megamat, 170 kg / tray, approx. 6 m high, – used - : Price ex location: €14,500 (net), plus dismantling, etc. Manufacturer: Megamat Model: Megalift 14448/25/6010 Year of manufacture: 2000 Max. load capacity per tray: 170 kg Bedsyhxkmspfx Ahyswn Max. total load capacity: 18,000 kg Dimensions per tray: approx. 2.45 m x approx. 0.80 m Number of trays: approx. 40 units Machine dimensions: Height: approx. 6.01 m Width: 2.76 m Depth: approx. 2.70 m 3/N/PE 230/400V 10A, fuse 16A Condition: good Availability: immediately Location: BG-8800 Sliven

Condition: good (used), approx. 200 pcs. shelf dividers (free standing) for shelf racks 40cm, SSI Schäfer - used - : Prices per piece ex location: 2.- € (net) disassembled, packed and loaded! Manufacturer: SSI Schäfer type: TRF 44 10 Bedpfjkhfv Rsx Ahyswn Year of manufacture: unknown With plastic core For shelf depth: 40cm Height partition: 100mm New price: approx. 5.-€ Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony)

Condition: good (used), approx. 900 pieces shelf dividers (continuous) for shelf racks 30cm - used - : Prices per piece ex location: 2,50 € (net) disassembled, packed and loaded! Manufacturer: SSI Schäfer type: would have to TR 3330 Year of manufacture: unknown Height: approx. 33cm height incl. "lugs": ca. 36cm Depth: ca. 26cm - for shelf depth 30cm Galvanized Original price: ca. 7.-€ Condition: good Available: immediately Bodpski Tq Iefx Ahyjwn Location: Warehouse Frankenberg (Saxony)

Condition: good (used), Year of construction: 1995, Lifting system, Kardex, tray size: 1250x825mm, 7m high – used - : Price ex location: €13,950 (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Bellheimer / Kardex Type: Shuttle 1250x825x10000 Device number: 95.008812/001 Year of manufacture: 1995 Tray size: 1250x825mm Device height: approx. 7m Depth: approx. 2.70m Width: approx. 1.6m Number of trays: 44 units Bwedpfxjyrqvfo Ahyjn Permissible total payload: 2x10,000kg Permissible shelf load: 250kg 3x400V, Current: 3x5.2, Power: 3.6 kW Condition: used Available: from approx. week 13/2026 Location: Speyer

Condition: like new (used), Large tray sealer direct from UK meat factory where it was packing ground meat in MAP trays. We have two identical machines available. Bjdpjilfkrsfx Ahyewn

Condition: used, Year of construction: 2013, Kersting plastic chain conveyor belt conveyor conveyor Inclined conveyor washing GF 3350-720-620 Bsdsk Abpaspfx Ahyewn RA1974 Technical data: Conveying length (NL): 3350 mm Framework width (NB): 720 mm belt width (GuB): 620 mm Height/band run (BH): from 920 mm to 1250 mm rising +/- 50 mm height adjustment Conveying speed (v m/s): pleas contact us with you needed Speed Drive: DEW- Gearmotor Electrical data: 400 V / 50 Hz / 0,37 kW Belt: plastic chain with toothwheel drive Year of construction: 2013 Special feature / accessories: Drip tray to catch the washing water All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Condition: good (used), For sale: Baking trays with gutters brand: SASA number of pieces in total: 550 baking trays total price: €25,000 dimensions: Length: 200 cm width: 80 cm height: 5 cm gutter width: 9.5 cm number of gutters per plate: 21 gutters The baking trays come from a current Mecatherm Line See also the photos All as good as new and still provided with a Teflon layer and all the plate are stainless steel. Viewing is possible on location If you have any questions, we'd love to hear from you! Kind regards, Leo Holland for sale: baking trays with gutters brand: SASA total number of pieces: 550 baking trays total price: 25,000,- dimensions: Length: 200 cm width: 80 cm height: 5 cm width gutter: 9.5 cm number of gutters per plate: 21 gutters See also the photos All as good as new and still provided with Teflon layer and all plates are made of stainless steel The baking trays come from a current Mecatherm Line Viewing is possible on location If you have any questions, we would like to hear from you! Bodpfxsrt Uw Re Ahyewn kind regards, Leo Holland

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Sealpac 800 | Automatic and high-performance tray sealer Manufacturer: SEALPAC GmbH Model: SEALPAC 800 Type designation: TVG 01 1031 01 Year of manufacture: 2004 Power supply: 3x 400/230 V, 50/60 Hz Connected power: max. 10 kW Compressed air consumption: 8 bar / 650 l/min Cooling water consumption: approx. 4–5 l/min Protection class: IP 65 Machine weight: approx. 2000 kg Overall dimensions: 8500 × 900 × 2000 mm Conveyor system and tooling: - Infeed and outfeed belts: Mesh/wire belts, working width: (2x) 220 mm - Formats / Tooling dimensions included: - Four-row tool: (4x) 220 × 160 mm - Three-row tool: (3x) 288 × 220 mm - Maximum tray depth: up to 200 mm Additional equipment (included): Bedpfx Ahjy T Su Tsyewn - Busch vacuum pump Type: 250-132 Serial number: 49167 Capacity: 250 m³/h Ultimate vacuum: 0.5 mbar Oil quantity: 6 liters (recommended type: SAE 30) - Accessories: Additional pallet with spare parts and format elements. The SEALPAC 800 is a fully automatic, industrial sealing line designed for continuous operation in meat, poultry, fish processing plants, and ready-meal production facilities. The machine precisely forms a vacuum and applies a protective gas mixture (MAP / Modified Atmosphere Packaging technology), which significantly extends the freshness and shelf life of packaged food products. Thanks to its impressive frame length (8.5 m), the machine provides a long and convenient loading area for personnel or automatic dispensing machines. The machine features modern microprocessor control, low noise emission (approx. 73 dB), and a full stainless steel construction with IP 65 protection, which enables aggressive chemical and pressure washing after production. The included Swiss Busch pump with a capacity of 250 m³/h guarantees quick and stable achievement of a deep vacuum in the sealing chamber.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 1 x Packaging Automation Ltd inline sealing machine. Supplied with 3 x sets of tooling for different sized punnets and some spare parts. This unit was purchased new and run for 6 x months per year. Model – Eclipse SL4. Serial number – EC34-MC-00214. Date of manufacture – 2021. Bwjdpfsy S E S Ajx Ahyon Maximum output - up to 75 packs/minute (with the 5x1 format tooling setup). Tooling: Tooling Set 1 - 5 x 1 format with arms. THERMOFORM 773 / ECSL4-TL-00644 / Seal RL=669mm. Tooling Set 2 - 4 x 1 format with arms. TERMOFORMAS 691 TRAYS / ECSL4-TL-00150 / Seal RL=581.75mm. Tooling Set 3 - 4 x 1 format with arms. PACTOV 5550 TRAY / ECSL4-TL-00159 / Seal RL=531mm. Belt width - 290mm wide. Overall dimensions - 3200mm long x 1000mm wide x 2000mm high. Weight - 800 kg. In excellent working condition.

Condition: used, total length: 630 mm, total width: 600 mm, total height: 1,800 mm, input voltage: 220 V, power: 1.5 kW (2.04 HP), Rühle VR1 Packaging System Tray sealer with label printer and weighing unit 230 V / 1.5 kW / 50 Hz Display is defective, currently operated with a 'regular monitor' (everything else functions properly and can be tested) Two 20 kg packaging gas cylinders can be integrated at the rear. Larger cylinders can also be connected externally. Original documentation available. Machine height: 1,800 mm Bwsdpfsw Nff Nex Ahysn L x W in mm: 630 x 600 Maximum packaging size in mm: 350 x 400 x 250 3 different sealing tools included (can be stored in the machine housing) Mobile (on wheels)

Condition: ready for operation (used), Year of construction: 2016, Reepack ReeFlex 250 – Automatic Tray Sealer Bodoy Rrrajpfx Ahyown The professional automatic tray sealer Reepack ReeFlex 250 is designed for industrial packaging of food products. This machine was developed with high performance, reliability, and flexible operation in modern production lines in mind. The machine is in good technical condition and ready for operation. Key information: Manufacturer: Reepack Model: ReeFlex 250 Year of manufacture: 2011 Type: in-line automatic tray sealer Frame made of AISI 304 stainless steel Siemens PLC control with touch-screen HMI operator panel Dual mold system to increase production efficiency Capable of working with MAP technology and vacuum packaging (depending on configuration) Technical parameters: Number of trays per cycle: 2 to 8 pieces Working capacity: approx. 6–15 cycles/min Energy-efficient system Optimized energy and compressed air consumption Robust industrial stainless steel frame Available formats: The machine is equipped with tooling for various tray sizes. Mold dimensions: 325 × 265 mm 227 × 178 mm Equipment options: ✔ Option to sell with a used vacuum pump ✔ New vacuum pump available as an option ✔ Various configurations tailored to customer needs Applications: Perfect for packing: meat and meat products poultry fish ready meals vegetables and salads cheeses and dairy products An ideal solution for Modified Atmosphere Packaging (MAP) to extend product shelf life. Advantages of the equipment: ✔ High production efficiency ✔ Easy operation and quick format change ✔ Reliable industrial design ✔ Hygienic construction compliant with food industry standards ✔ Possible integration into production lines

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, The line includes: 1. SEALPAC A7 tray sealer (year of manufacture: 2010) Number of cycles: up to 15 cycles/min Output: up to 100 containers/min (vacuum/gas mode; higher output in sealing-only mode) Weight: 1,700 kg Compressed air: min. 6 bar Power supply: 3 × 400/230V – max. 8 kW Technical condition: very good 2. KWS5472BW3D automatic checkweigher Designed for weighing individual loads Precise weight compliance control Fully integrable with the production line 3. CASSEL metal detector High detection sensitivity Protection against metallic contaminants Industrial-grade construction, suitable for continuous operation Line advantages High efficiency and process repeatability Operation in both MAP and standard sealing modes Bwodpjy Rqmvjfx Ahyon Robust, proven machinery from reputable manufacturers Low operating costs The line is ready for immediate operation

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 48 V, total height: 650 mm, total length: 984 mm, total width: 630 mm, Tested forklift battery for your truck – 48V 6PZS 750AH – Special tray + 1 year warranty + Includes Aquamatik battery watering system + Includes terminal discharge cable & REMA 320 plug (other connectors can be installed upon request) + Capacity: at least 90-100% (C5 capacity test protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 984 mm Width: 630 mm Height: 650 mm Weight: approx. 1,050 kg Suitable for the following models and more: Still FM 20 Jungheinrich EFG 220 Jungheinrich EFG 316 Jungheinrich EFG 318 Jungheinrich EFG 320 Jungheinrich EFX 413 Jungheinrich EKX 410 Jungheinrich ESE 533 Toyota 8FBE16T Toyota 8FBE18 Bodpfx Ahoy Rnt Hsyewn Toyota 8FBE18T Toyota 8FBMT16 Toyota 8FBMT18 Toyota 8FBMT20 Crown SCT 60 Atlet EF 180 Atlet EF 200 Atlet ET 180 Atlet ET 200 Atlet UHS Baumann EX 25-40 Caterpillar EP-FB18 Caterpillar EP-FB20 Caterpillar EP16 Caterpillar EP16/18PNT Caterpillar EP18 Caterpillar EP18/20 Caterpillar EP18/20KT Caterpillar EP18/20NT Caterpillar EP18KT Caterpillar EP18PNT Caterpillar EP20 Caterpillar EP20KT Caterpillar EP20PN Caterpillar EP20PNT Caterpillar F35 Daewoo B16 X Daewoo B16 X-5 Daewoo B18 T Daewoo B20 T Doosan B16X Doosan B16X-7 Doosan B18-5 Doosan B18T-7 Doosan B18T-AC Doosan B18X-5 Doosan B20T-7 Doosan B20T-AC Doosan B20T/X Doosan B20X-7 Doosan BT18T Doosan BT18T-5 Hyster H1.75XM Hyster J2.0XMT Hyundai 18BT-9 Hyundai 20B-9 Hyundai 20BT-7 Komatsu FB18 Komatsu FB20 Mitsubishi FB16 Mitsubishi FB16PNT Mitsubishi FB18KT Mitsubishi FB20KC Mitsubishi FB20KT Mitsubishi FB20NT Mitsubishi FB20PNT Nichiyu FB20P-60BC Nissan G1N1 Nissan G1N1L18 Nissan G1N1L18Q Nissan G1N1L18U Nissan GN01L18U Nissan GN1L16U Nissan TX16 Nissan TX18L Nissan TX20 Nissan TX20L Nissan TX4-18 Steinbock-Boss KE 20 UniCarriers TX4-20 Utilev UT20PTE Yale ERC 18 Yale ERC 20 Yale ERP 16 ATF Yale ERP 18 Yale ERP 18 ATF Yale ERP 20 Yale ERP 20 ATF Common battery sizes available, feel free to inquire. Transport available.

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 80 V, total height: 798 mm, total length: 1,228 mm, total width: 478 mm, Tested forklift battery for your truck – 80V 3PZS 465 – special tray + 1 year warranty + incl. Aquamatik system + incl. end discharge devices & REMA 320 connector (other connectors available upon request) + Capacity: min. 90–100% (C5 capacity protocol supplied upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,228 mm Width: 478 mm Height: 798 mm Weight: approx. 1,210 kg Suitable for the following models and others: Bwedpfoy Rnr Nox Ahyen Jungheinrich EKX 514 Jungheinrich ETX Jungheinrich ETX 514 Toyota FBM16 Toyota FBMF16 Bradshaw T20 Dimos EFY3504R Heli CPD 30 All common battery sizes available, please inquire. Transport possible.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 742 mm, total length: 1,027 mm, total width: 852 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - special tray + 1 year warranty + incl. aquamatic system + incl. end conductor & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of delivery: 2024 Bwsdpfjy Rnrvjx Ahyon Dimensions: Length: 1,027 mm Width: 852 mm Height: 742 mm Weight: approx. 1,580 kg Suitable for the following models and others: Daewoo B30 X-5 Common battery sizes available, inquiries welcome. Transport available.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,027 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - Special tray 2 + 1 year warranty + incl. aquamatic system Bodpfsy Rnrpjx Ahyewn + incl. end conductor & REMA 320 plug (other plug types can be fitted on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,027 mm Width 708 mm Height 784 mm Weight: approx. 1,270 kg Suitable for the following models and others: Toyota 8FBMKT25 Atlet BALANCE Atlet EH 25 Baumann EX 25-40 Caterpillar EP25K PAC Charlatte T135 Charlatte T165 Charlatte T20 Doosan B30NS Hyster E2.0-3.2XM TCM FHB20-E1 TCM FHB25 Common battery sizes available—please enquire. Transport possible.

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 982 mm, total length: 1,640 mm, total width: 435 mm, Tested forklift battery for your forklift – 80V 4PZS 620Ah – custom tray + 1-year warranty + incl. aquamatic system + incl. end conductors & REMA 320 plug (other plug types can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Delivery year: 2024 Dimensions: Length: 1,640 mm Width: 435 mm Height: 982 mm Weight: approx. 1,600 kg Suitable for the following models and more: Dimos DMS 40/45 Common battery sizes available, please enquire. Transport possible. Bsdpoy Rnrcsfx Ahyswn

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,658 mm, total width: 432 mm, Tested forklift battery for your forklift - 80V 4PZS 620Ah - Special tray 2 + 1-year warranty + Includes aquamatic filling system + Includes end discharge resistor & REMA 320 connector (other connector types can be fitted on request) + Capacity: minimum 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length 1,658 mm Width 432 mm Height 784 mm Weight: approx. 1,550 kg Suitable for the following models and more: Jungheinrich EKX 513 Toyota FBM20 Toyota FBMF16 Toyota FBMF25 Toyota/BT VCE 135 Bradshaw T20 Caterpillar EP20K Caterpillar EP20N Caterpillar EP25K Caterpillar EP25K PAC Caterpillar EP30CN Charlatte T135 Charlatte T135 EVO Combilift SL Daewoo B22/25 X-5 Daewoo B22/25 XL-7 Daewoo B25 X Daewoo B30 Daewoo B30 X-5 Daewoo B32 Daewoo B35 X Dimos EFY3004 Dimos EFY3504R Doosan B22X Doosan B22X-5 Doosan B25X-7 Doosan B30NS Doosan B30X Doosan B35NS Hubtex MD 30 Hubtex MQ 40 Hubtex MQ 45 Hubtex MQ 60 Mitsubishi FB25 Mitsubishi FB25AN Mitsubishi FB25K PAC Bodpoy Rnq Ssfx Ahyswn Nissan 1Q2L25Q Utiley UT3OPFE Other standard battery sizes available on request. Transport can be arranged.

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 80 V, total height: 635 mm, total length: 1,030 mm, total width: 840 mm, Tested forklift battery for your lift truck – 80V 5PZS 625AH – special tray + 1 year warranty + incl. Aquamatik + incl. end connector & REMA 320 plug (other connectors available on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,030 mm Width: 840 mm Height: 635 mm Weight: approx. 1,540 kg Bsdpfx Ahjy Rnqxsyswn Suitable for the following and other models: Toyota 8FBMT35 Carer Z25HD Carer Z25KN Caterpillar EP30K Caterpillar ЕР30КРАС Daewoo B22/35 X-5 Daewoo B30 Daewoo B35 X Doosan B32X Doosan B35X-5 Hyster E2.50XM Common battery sizes available, feel free to inquire. Transport possible.

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 80 V, total height: 583 mm, total length: 1,150 mm, total width: 1,115 mm, Tested forklift battery for your forklift – 80V 10PZS 750AH – special tray + 1 year warranty + including aquamatic system + including end connectors & REMA 320 plug (other plugs can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,150 mm Width: 1,115 mm Height: 583 mm Weight: approx. 1,860 kg Suitable for the following models and others: Bedpfx Aey Rnqlshyjwn Hyster E5.0XN Hyster E5.5XN Popular battery sizes available, please inquire. Transport possible.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 900 mm, total length: 2,020 mm, total width: 430 mm, Tested forklift battery for your truck - 80V 5PZS 775AH - Special container + 1 year warranty + incl. Aquamatik filling system + incl. end discharge resistor & REMA 320 connector (other connectors can be supplied on request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 2,020 mm Width 430 mm Height 900 mm Weight: approx. 2,030 kg Suitable for the following models and more: Still MX-X Jungheinrich EFG 430 Jungheinrich EKX 515 Toyota FBMF30 Bedpfx Asy Rnp Ujhyswn Baumann EMS 65-70 Caterpillar EP25N Caterpillar EP30KPAC Caterpillar EP35KPAC Caterpillar FB30 PAC Caterpillar FB35K PAC Cesab 5 Daewoo B22/35 X-5 Daewoo B30 X Daewoo B30 X-5 Daewoo B30 X-7 Daewoo B30 X-RW Daewoo B30/32 X Daewoo B35 X-7 Doosan B30X5 Doosan B35X-5 Hubtex MQ 40 Hubtex MQ 45 Hubtex MQ 50 Hubtex MQ 60 Hyundai 30BH-9 Hyundai 30BHA-7 Hyundai 50B-9 Kalmar ECD 40-5 Kalmar EFY 50 Kalmar EFY 60 Mitsubishi FB25N Mitsubishi FB30 Mitsubishi FB30AN Mitsubishi FB30K PAC Mitsubishi FB35AN Nissan QX30 Common battery sizes available, please inquire. Transport available.