Used Butterfly Valve for sale (6,200)

Condition: excellent (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, diaphragm valve, diaphragm shut-off valve Itodpjiqu Rnefx Abnjk -Manufacturer: Sisto, gate valve diaphragm valve Ovp -Connection: DN40 PN10 -Number: 5x valve available -Price: per piece -Cardboard dimensions: 250/180/H290 mm -Weight: 7.5 kg/pc.

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer stainless steel tank trailer for bitumen 32m³ TECHNICAL INFORMATION: * Vehicle code K.STS 32 / 1 - 10 / 24 * ADR suitable for the transport of dangerous goods * ADR tank code ADR tank code L4BH * Tank diameter 2,000 mm * External length 11,250 mm * Height 3,600 mm * Axle distance (Wb) 6,300 mm * Axle distance (A) 1,310 mm * Rear overhang 3,580 mm * Fifth wheel height 1,220 mm TECHNICAL CAPACITY: * Volume 32.0 m3 * Empty weight ±%3 6,400 kg Iedpfjr I S H Eex Abnjtk * Axle load 27,000 kg * King pin capacity 12,000 kg * The operating temperature is 250 °C * Test pressure (+H bar) 4.0 bar * The operating pressure is 2.0 bar * Total weight 39,000 kg TANK: * Cylindrical tank container with a slope to prevent residual quantities in the tank, made of AISI 321 (DIN 1.4541) stainless steel with ADR code L4BH * Vacuum valve The operating pressure is 0.21 bar * 1 x thermometer is included * Number of chambers 1 compartment * Insulation thickness The container is insulated with 100 mm thick glass wool * Insulation lamination Aluminum coating, CTP bomb * Final bottom coating The insulation on the front and rear bottom of the tank is coated with glass fiber reinforced polyester (GRP) * Stainless steel insulation rings fitted on the entire tank container * Number of manholes 1 pc. * 2" side air line made of aluminum on the right side of the vehicle. 2" TW coupling air line is included at the rear. * 1 x pressure gauge is included on the side air line * Equipped with a 1.5" air line for a higher delivery rate for bitumen and * to free the hoses from residues of the transported goods after unloading * 2" upper air line with 2-way sliding valve made of stainless steel * Aluminium walkway on the dome area * Mechanically foldable fall protection on the walkway in accordance with UVV * Access ladder on the right side of the container * The filling dome is on the front of the tank * There are 4 baffles in the tank DRAIN SYSTEM: * There is a DN100 bottom valve with handwheel operation on the discharge line, in accordance with the EN 14433 standard for dangerous goods. * Outlet line According to standard EN14433, outlet line starts with 4" bottom valve with handwheel control and leads to a 2nd safety valve for safe unloading (according to standard EN14432, 4" butterfly valve with mechanical control) and ends with a 3" TW coupling with internal thread and blind cover. A 1/2" sampling tap is included between the butterfly valve and TW coupling. * 1 x 6 m hose holder in an open-top box made of aluminum CHASSIS: * BPW axle with air suspension and disc brake and 3 x 9 tonnes permissible load capacity * BPW axles with 22.5" disc brake * Lift axle system on the 1st axle works automatically * KNORR-ILVL electronic air suspension ECAS * Tire size 385/65 R 22.5" 6-way * ALUMINUM rims * 1 x work light on the tank * Jost supports * 1 x plastic tool box, 400x480x600 mm OTHER: * ADR - Signum brand plate made of stainless steel, with a set of interchangeable numbers and foldable design * Danger sign in rigid design * Danger sign no: 3 * Danger sign no: 9 * Temperature sign * Environmental protection sign * 2 x fire extinguisher box without Fire extinguisher COLORS: * Chassis color RAL 3002 carmine red * Container color RAL 9006 white aluminum + paint We are happy to provide you with further information

Condition: excellent (used), Butterfly valve, flap valve, ball valve, butterfly valve, gate valve, diaphragm valve, diaphragm shut-off valve, flanged shut-off valve -Manufacturer: KSB, gate valve type BOA-W -Connection: DN 50 PN 6 -Number: 3x valve available -Price: per piece -Dimensions: 230/140/H260 mm Itodpfxjrp Ikrj Abnek -Weight: 8.6 kg/piece

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, directional control valve -Solenoid valve -Manufacturer: Festo -Type: NVF3-MOH-5/2-K-1/4-EX -PN: 2-10 bar -Number: 2 valves available Price: per piece Itedpsb A Rinofx Abnjk -Weight: 0.3 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394B03266, Year of construction: 2011, operating hours: 8,433 h, load capacity: 4,500 kg, lifting height: 4,100 mm, free lift: 2,111 mm, fuel type: gas, mast type: duplex, construction height: 2,875 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,100 mm Free lift: 2,111 mm Load capacity: 4,500 kg ISO class: 3 MACHINE DETAILS Mast type: Duplex Drive type: Internal combustion engine Rated power: 55 kW Overall height: 2,875 mm Unladen weight: 6,620 kg Iodpfx Abezu Nfcsnotk EQUIPMENT 3rd valve 4th valve

Condition: good (used), Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Manufacturer: Martonair -Type: M/20152/6123D -Magnetic valve -Connection: 1/4" inch -Number: 1x valve available -Price: per piece -Weight: 0.6 kg Itjdpfx Abjct Nvkensk

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Itodpfx Aezvgu Djbnjk Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: used, Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, butterfly valve, gate valve, manual gate valve Itedpfx Aboit Rmmjnjk -Gate valve: manual gate valve for ventilation duct -Pipe diameter: 300/260 mm, see photos -Number: 2x barrier slide available -Price per piece -Total dimensions: 340/225/H500 mm -Weight: 12.7 kg

Condition: good (used), Year of construction: 2013, functionality: fully functional, The FAMAR TANDEM 400 is a powerful CNC vertical lathe with two independent machining stations. The machine is equipped with driven tools, automatic workpiece loading and unloading, a measuring probe, high-pressure coolant, and coolant filtration. The tandem design enables efficient series production and the simultaneous use of two separate machining stations. Main technical parameters: Standard chuck diameter: 400 mm Maximum chuck diameter: 400 mm Nominal turning diameter: 300 mm Maximum turning diameter: 400 mm Maximum turning length: 480 mm Maximum turning length: 300 mm Number of main spindles: 2 Max. main spindle speed: 4,000 rpm Rated power of main electric spindle: 49.6 kW Rated torque: 458 Nm S6 40% power: 61.7 kW S6 40% torque: 724 Nm Machine dimensions: approx. 3,900 × 3,500 × 3,200 mm Machine weight: approx. 21,000 kg Electrical connection: 400 V / 50 Hz Installed power: 90 kW CE compliant Tooling equipment UTTUM50 – turret for driven tools, size 50 Max. driven tool speed: 8,000 rpm Torque: 100 Nm Power: 15.6 kW UTDUM50 – turret tool disk Size VDI 50 12 tool positions Direct tool drive PPP40 – preparation for 2 hydraulic circuits For special workpiece clamping Piping and valves Control via M-functions Automation TRPAPE20 – 1 automatic circulating pallet conveyor for loading and unloading workpieces A single conveyor system for both workpiece infeed and outfeed Circulating pallet magazine Belt design Pallet occupancy monitoring system Pallet sorting system Working height approx. 950 mm Automatic workpiece loading and unloading via the machine TRPNVBPTE4 – Shuttle system with rotary station Itsdpozvd Unefx Abnsk Loading/unloading shuttle system Integrated rotary station Including 1 set of jaws for the workpiece AZGRRB500 – set of jaws for Shuttle rotary station MPDM2 – automatic measuring probe Automatic workpiece measurement Coolant, filtration, and chip removal LBCVTT50 – belt conveyor for chips Separate conveyor for chip removal Particularly suitable for short chips, such as cast iron, brass, and some aluminum alloys LBVA760 – coolant tank Volume 760 l LBAP10 – high-pressure pump Pressure 20 bar Internal tool cooling LBFTC – paper filter for coolant Suitable for cast iron and aluminum Filtration of particles approx. 0.08 mm Flow rate max. 60 l/min LBFTTDF – double switchable filter Filtration of particles approx. 0.1 mm Bypass system allowing filter cartridge replacement AZPL – air workpiece position control Additional equipment: CNC control Siemens 840D sl 2 main spindles Driven tools C-axis 12-position turret VDI 50 1 automatic workpiece pallet conveyor Shuttle system with rotary station Automatic measuring probe Separate belt conveyor for chips High-pressure cooling 20 bar Coolant filtration Hydraulic clamping circuits Central lubrication Complete safety guarding CE The machine is particularly suitable for automated series production of rotational parts, where the two independent machining stations, driven tools, and automatic workpiece handling can be utilized.

Year of construction: 2006, condition: used, Butterfly valve, flap valve, solenoid valve, solenoid valve -Manufacturer: Asco, two-way solenoid valve -Type: SCG262C022 -Connection: 1/4 " -Number: 1x valve available -Dimensions: 70/40/H60 mm Itsdpfx Aogg Tggobnek -Weight: 0.4 kg

Condition: excellent (used), Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, slide valve, pneumatic control valve, angle seat valve, valve -Manufacturer: burkert, pneumatically operated 2/2-way angle seat valve unused OVP -Type: 2000 A 50.0 NBR RG G2 Itjdeghb Etepfx Abnek -Connection: DN50 PN25/Rg5 -Dimension box: 370/170/H90 mm -Weight: 4.6 kg

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -Connection: 3/8" inch -Air: 9 bar Itodpfx Aob A Sdcobnek -Water: 9 bar -Price: per piece -Quantity: 13x Available -Weight: 1 kg

Condition: ready for operation (used), Year of construction: 2001, Offered is a valve bag filling system (50kg) with connected palletizer. Bag type: valve bags (paper, PE or PP), filling weight: adjustable up to max. 50kg, piping system with integrated conveying screw / dosing screw, pneumatic bag clamping, weighing unit, discharge conveyor belt. Automatic layer palletizer - Ehcolo PM 400. Year of manufacture: 2001, capacity: up to approx. 400 bags per hour, incline conveyor / bag flattener, empty pallet magazine, complete machine enclosure. Inspection possible by arrangement. Itjdpfx Abeylzg Uonok

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -Connection: 1/4" inch -Price: per piece -Quantity: 9 available -Weight: 0.5 kg Isdpfx Abob A Sdgjnjtk

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve Iedpeb A Sddjfx Abnetk -Solenoid valve -220 V 50 Hz 16 W -PN: 0-3 bar -Price: per piece -Quantity: 6 available -Weight: 0.8 kg

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN25 -Width: 160 mm -Nominal pressure: PN10 -Dimensions: 160/115/H183 mm Isdpfx Asd I I Htsbnetk -Weight: 3.8 kg

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN50 -Width: 230 mm -Nominal pressure: PN10 -Dimensions: 230/163/H254 mm -Weight: 9.4 kg Ijdpfxjd I I Hue Abnstk

Condition: good (used), Solenoid valves for block mounting, disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, directional control valve -Solenoid valve -Type: Thread mount: M18x1.5 mm -Number: 80 valves available -Price: per piece Ijdsb A H Hnspfx Abnotk -Weight: 1.5 kg/piece

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: serie nr 3149, overall weight: 11,800 kg, total width: 6,615 mm, total length: 8,890 mm, total height: 2,050 mm, spindle diameter: 50 mm, type of input current: three-phase, space requirement length: 16,000 mm, space requirement width: 8,000 mm, milling spindle length: 650 mm, compressed air connection: 8 bar, spindle speed (min.): 3,500 rpm, spindle speed (max.): 3,500 rpm, length stop: 3,450 mm, input voltage: 125 V, power: 65 kW (88.38 HP), main saw diameter: 450 mm, corner unit for window and door frames, including tools. controlled from the office (Groeneveld). interpolation (angled pins). barcode laser. return transport. documentation available. complete sets of spare blades/saws, including router bits, linked to Groeneveld. automatic counter-piece. maximum workpiece length 6000. sticker printer for barcode. automatic waxelite pump. automatic central lubrication. connections for pin holes and counter-molds. automatic length stop and rotation for workpieces. including extraction pipes with automatic valve. thicknesses from 38 to 150 mm. pin bank: 1x saw blade 40mm. 2x pin shaft 50x650. 2x edge breaker 30x40. router: 1x rounding router 30x40. 3x router bits 50x600. machine can be picked up here; in conjunction with Bos Machines (dismantling and transport not included in the price). price excludes VAT. Iodeztptqepfx Abnetk

Condition: used, Year of construction: 2003, machine/vehicle number: M338, Used Crown Bevcorp 40 valve filling monoblockTechnical Specifications & Performance DataThis used can filling monoblock combines a Bevcorp UB40 rotary can filler with an Angelus 61H seamer, delivering dependable performance for industrial packaging and beverage production. The system is configured for aluminum cans and is supplied with tooling for multiple can body styles. It is an excellent option for a second hand solution within a used bottling line where reliability and ease of integration are essential.Filler model: UB40 rotary can fillerFiller valves: 40Seamer model: 61HOverhauled in 2019Containers: Aluminum cans (standard and sleek)Ends: 202 can endsSpeed: 20.000 BPHConfigured can sizes: 12 oz (approx. 0.355L) and 16 oz (approx. 0.473L)Included components: Can transfer conveyor, electrical panel, lubrication panel system, stainless steel mechanical safety guarding, handling parts, operator manualElectrical: 480 V, 3 Ph, 60 HzNitrogen dosing: Vacuum barrier nitrogen dosing systemCondition: Used – good; regularly maintainedAdvanced Automation & Control SystemsThe monoblock includes an integrated electrical panel to manage coordinated operation of the filler and seamer. Safety interlocks and stainless steel safety guarding support operator protection during beverage production. Variable speed drive elements are supported by a dedicated lubrication approach for reliable operation under continuous duty. Quick access to guarding and panels facilitates routine adjustments and preventive maintenance in industrial packaging environments.Production Line Integration CapabilitiesDesigned to operate inline with upstream and downstream equipment, this filler–seamer block integrates smoothly into a used bottling line or a new beverage production layout. The included can transfer conveyor simplifies synchronization between the 40-valve filler and the 61H seamer. Existing handling parts and tooling accommodate both standard and sleek aluminum cans with 202 ends, supporting efficient format changes between 12 oz and 16 oz. The monoblock can operate as part of a complete packaging machinery setup alongside depalletizing, rinsing, coding, and case packing systems.Machine Condition & Maintenance HistoryThe equipment is described as used – good and has been regularly maintained. Mechanical safety guarding, lubrication panel, and operator manual are included, indicating a machine that has been cared for and kept in service-ready condition. This makes it a strong second hand choice for plants seeking to expand or refresh beverage production capacity with minimal downtime.Operational Performance & VersatilityEngineered for flexibility, the monoblock is capable of running carbonated and non-carbonated beverages. The 40-valve filler supports steady throughput and consistent fill accuracy, while the Angelus 61H seamer is recognized for robust end application and seam integrity. The vacuum barrier nitrogen dosing system enhances product quali... Itedpfszcf Idox Abnjk

Condition: ready for operation (used), Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible. Isdpfoyv H E Eex Abnetk

Condition: excellent (used), Soup production line The line has been in operation for a very short time, only 3 years, and has been expanded with a mixer for producing hummus and cream soups. The cost of a new line of this type is two million euros. The line consists of the following equipment: - B200-500VA mixer with turbo booster - Main tank on a frame, 2017 - Valve station and frequency inverters - Containerized boiler for steam, gas-powered, 2017 - Climaveneta chiller, 2013 - FBL cooling tunnel, FL-10-2017 type - Spolex cup transport system, 2017 - OCS Checkweighers GmbH X-ray inspection device, 2017 - Radwag checkweigher, 2017 - PAG Dozo-Pak automatic packaging machine - Spolex cup drying system, 2017 - JET 3 inkjet printer - Documentation in Polish and English, declarations of conformity. Iedpfxjyc E Rfe Abnetk Line for cooking and cooling ready meals, creams, soups, broths, jams, and marmalades, traditional and international dishes, sauces, and pastes. Installed as new in 2017. Thanks to the use of the Turbo Mixer B200, you can produce hummus and cream soups. Please see my other listings.

Year of construction: 2026, condition: new, New portable homogenizer with a 145 mm diameter rotor, made of AISI 316L in all parts in contact with the product, and with a polished finish Ra < 0.80 μm. It can withstand vacuum and a working pressure of 16 bar, and its motor has a power of 7.5 kW, providing a rotation speed of 2,930 rpm. It includes an atmospheric system for solid intake, which allows the direct injection of powdered solids into the homogenizer's intake. This process solves the problems of incorporating floating solids and improves processing time if all other ingredients are loaded through the hopper, as they are added directly to the homogenizing chamber. The hopper has a capacity of 50 liters and features a butterfly valve, which allows it to be closed and the inlet flow rate to be regulated. All components are mounted on a wheeled cart to facilitate mobility. Production: 5,000 L/h Motor: 7.5 kW at 2,930 rpm 50 Hz Itodpfxszktgco Abnok Intake: DN50 Outlet: DN50

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve type BOA-H JL1040 without drive -Connection: DN 40 PN 6 -Quantity: 2x valve available -Price per piece Itodpfx Aorp Ik Sjbnek -Dimension: 200/150/H180 mm -Weight: 7.7 kg/pc.

Condition: used, functionality: fully functional, machine/vehicle number: H2X386A05806, Year of construction: 2010, operating hours: 29,074 h, load capacity: 2,000 kg, lifting height: 2,300 mm, free lift: 1,660 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, drive type: Elektro, Electric four-wheel forklift Chassis number: H2X386A05806 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Itodpfx Aey U R Axsbnsk Description: For sale is a Linde E20PHL-01 diesel forklift. The forklift is ready for use and fully functional. Both the visual and technical condition are good. The unit is available immediately. Quick and straightforward transport is possible upon agreement. Subject to errors and prior sale. Sale is made excluding any warranty or guarantee. Side shifter, 3rd valve, 4th valve.