Used Black Müller Tipper for sale (336)

Condition: used, overall weight: 11,900 kg, maximum load weight: 8,750 kg, axle configuration: 2 axles, first registration: 06/2024, Year of construction: 2023, total width: 2,550 mm, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Further information Crjdpfsvy Tvtex Adksh New: No

Condition: used, overall weight: 18,000 kg, empty load weight: 4,200 kg, maximum load weight: 13,800 kg, axle configuration: 2 axles, loading space volume: 10 m³, loading space length: 5,000 mm, loading space width: 2,380 mm, loading space height: 900 mm, first registration: 06/2013, suspension: air, tire size: 385/65R22.5, color: green, mileage: 1,001 km, gearing type: other, total length: 2,550 mm, total width: 2,450 mm, driver cabin: other, Equipment: ABS, Vehicle location: in transit, 2 axles, tandem, air suspension, ABS (anti-lock braking system), lashing rings, underrun protection, front support, pendulum flaps. Cedpfx Asxga T Uedksrh Superstructure: Aluminum sideboards, foldable and swinging on both left and right, spring-assisted. 5 mm HB 450 steel floor, drum brakes, BPW axles. All information without guarantee, as the vehicle is in transit! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: used, overall weight: 11,900 kg, empty load weight: 3,050 kg, maximum load weight: 8,850 kg, axle configuration: 2 axles, loading space length: 5,040 mm, loading space width: 2,420 mm, first registration: 11/2014, next inspection (TÜV): 12/2025, suspension: steel, tire size: 235/75R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75R17,5 143J, rear tire size: 235/75R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , Surcharge for ramps €800, , -- Printing errors, mistakes and changes reserved, sample images --, More data at: ! More details: ! Cedpfx Adexc Il Dskerh

Condition: like new (used), Year of construction: 2021, Ref:11000 . 2021 Muller Martini VBA 3683 Endsheet Tipper Latest model, book on demand, inline endsheet tipper for MM Vareo lines, to process all types of book blocks. Either EVA or PUR can be applied to the side of the book block using nozzles, from thread-sewn blocks to single-sheet stacks that are not pre-glued. Process: High degree of automation allows for making changes to the physical aspects and content of each individual product for complete variability. When products are fed into the fully thickness-variable VBA, the thickness of the book block is measured and the barcode is read. The amount of the space between the endsheet fold and the book spine can be adjusted automatically so the endsheet does not have to be milled later on. Can be used to process all types of book blocks, with either EVA or PUR glue, then the front and back endsheets are attached. Equipped with: Endsheet tipper Automatically book block feeding station Segmented timing belt for safe infeed of the paper stacks Electrostatic blocking device for single-sheet stacks Perfect binder Vareo Premelter Cover feeder Waste exhaust system Curved conveyor 90° Roller table delivery Features: Inline compatibility with Vareo lines Flexible production for hard or soft cover Fully thickness variable, including thickness measuring device at the infeed Endsheet application on all different types of book blocks with full thickness variability Automatic machine setting by Barcode reader at infeed Barcode can read: Job-ID / Product type (SC/HC) / Book block thickness / Book block height / Height of endsheet Top quality application of one-piece endsheets glued via nozzles Can work with: Loose signature stack/ Pre-glued signature stack / Thread-sewn block / Single sheet stack Specification: Max speed: 1,000 cycles/h Endsheet paper grammage: Min 130 gsm / Max 200 gsm Book block Spine length: Min 105 mm (4 1/8") / Max 360 mm (14 3/16") Book block width: Min 105 mm (4 1/8") / Max 330 mm (13") Book block thickness: Min 1.5 mm (1/16") / Max 60 mm (2 3/8") Bulkiness factor Min 1.0 / Max 1.3 Endsheet height (distance from spine): Min 0 mm (0") / Max 5 mm (3/16") Adhesive line height (distance from spine): Min 1 mm (1/16") / Max 8 mm (5/16") Stack height in the hopper: Max 150 mm (5 15/16") Credpfsw S Idtjx Adkoh Note: For in-line processing of book blocks via Automatic Infeed of Vareo, the endsheet must not be longer than the book block!

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, loading space volume: 10 m³, loading space length: 4,990 mm, loading space width: 2,330 mm, loading space height: 870 mm, first registration: 11/1999, Equipment: ABS, 3-way tipper body, 880 mm steel side walls, height-adjustable drawbar, 50 mm towing eye, Jost support winch, ABS, BPW Eco axle(s), drum brake system, air suspension, reversing lights. Vehicle may be covered with advertising decals and/or lettering. Csdpfx Adsw Ndxzokerh Our offer generally excludes a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops! Vehicle may be covered with advertising decals and/or lettering. Our general delivery and payment terms apply. We are pleased to offer you financing or leasing plans for this item. Please contact us!

Condition: used, overall weight: 18,000 kg, empty load weight: 4,500 kg, maximum load weight: 13,500 kg, axle configuration: 2 axles, loading space length: 4,800 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, first registration: 08/2015, next inspection (TÜV): 07/2025, color: blue, Year of construction: 2015, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * Condition, see photos * Müller-Mitteltal 3-way tipper, type KA-TA-R 18.0 tandem Csdpewz H Nbjfx Adksrh * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost support leg * Payload 13,500 kg If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure the buyer does not have any misconceptions regarding condition or suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: used, overall weight: 18,000 kg, empty load weight: 4,420 kg, axle configuration: 2 axles, loading space volume: 12 m³, loading space length: 5,000 mm, loading space width: 2,410 mm, loading space height: 950 mm, first registration: 12/2008, suspension: air, tire size: 385/65 R 22,5, wheelbase: 1,310 mm, color: green, Equipment: ABS, Drum brake EBS Payload 13,580 kg Swinging and folding aluminum side drop sides with lifting springs Codpfx Aderz Rtmekerh Rear steel dropside BPW axles Errors excepted

Condition: used, overall weight: 18,000 kg, empty load weight: 4,120 kg, maximum load weight: 13,880 kg, axle configuration: 2 axles, loading space volume: 10 m³, loading space length: 5,000 mm, loading space width: 2,360 mm, loading space height: 900 mm, first registration: 03/2016, next inspection (TÜV): 02/2026, suspension: air, tire size: 385/65R22.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, air suspension, ABS (anti-lock braking system), underrun protection, front support, pendulum tailgates. Superstructure: Tandem tipping trailer with aluminium drop sides, approx. 10m³, 2x 9t BPW axles, drum brakes! Loading height approx. 1510mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, intermediate sale and errors excepted! Cedpfxexfli Ee Adksrh

Condition: used, overall weight: 11,900 kg, empty load weight: 3,100 kg, maximum load weight: 8,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, first registration: 04/2018, suspension: steel, tire size: 235/75R17.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, under-tubing, front and rear outriggers, pendulum tailgates, height-adjustable drawbar. Construction: Tandem tipping trailer with loading ramps. Currently rated at 10,000 kg, can be increased to 11,900 kg. Galvanized frame, Gigant axles, drum brakes! Loading height approx. 950 mm! Cjdpfswa Dwyox Adksrh Loading ramps available for an additional charge of €1,000.00 net! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! - .

Condition: used, overall weight: 10,500 kg, empty load weight: 2,910 kg, maximum load weight: 7,590 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 450 mm, first registration: 09/2009, next inspection (TÜV): 04/2025, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, front support, rear support, swing flaps. Construction: Tandem 3-way tipping trailer with ramp shaft. Loading ramps available for an additional charge of €900.00 net! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Crsdsv S H Sfepfx Adkeh - .

Condition: used, overall weight: 10,000 kg, empty load weight: 2,700 kg, maximum load weight: 7,300 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 1,000 mm, first registration: 06/2006, suspension: steel, tire size: 245/70R19.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel structure, leaf springs, 2 axles, BPW axles, tandem, lashing eyes, U-protection, front support, pendulum flaps Structure: 3-way tipping trailer, steel side walls that swing and fold down, 2x BPW axles, drum brakes! Loading height approx. 1040mm. Side walls can be folded down at the top and bottom! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Csdpfx Asvlxlqjdkerh - .

Condition: used, overall weight: 6,000 kg, empty load weight: 2,230 kg, maximum load weight: 3,770 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 500 mm, first registration: 02/1984, suspension: steel, tire size: 10.5-20, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, U-protection, front support, rear support, pendulum flaps, height-adjustable drawbar Cjdpouxd Rpsfx Adksrh Body: 3-sided tipper trailer with towing jaw and brake connections (red, yellow) ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, overall weight: 14,400 kg, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,430 mm, loading space height: 900 mm, first registration: 07/2011, next inspection (TÜV): 08/2024, suspension: air, tire size: 285/70R19.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, tandem, air-suspended, ABS (anti-lock braking system), flap, lashing eyes, U-protection, front support, rear support, pendulum flaps, height-adjustable drawbar Body: Tandem 3-sided tipper trailer with aluminum drop sides 2x Gigant axles, drum brakes! Drive-on ramps available for an extra charge of 990.00€ net! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Cedpsth Uavefx Adkjrh - .

Condition: used, overall weight: 12,600 kg, empty load weight: 3,110 kg, maximum load weight: 9,490 kg, axle configuration: 2 axles, loading space length: 4,550 mm, loading space width: 2,380 mm, loading space height: 600 mm, first registration: 05/2016, next inspection (TÜV): 02/2025, suspension: steel, tire size: 285/70R19.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel construction, 2 axles, turntable, leaf springs, ABS (anti-lock braking system), lashing eyes, storage box, pendulum flaps Construction: 2-axle 3-way tipping trailer Gigant axles, drum brakes, frame hot-dip galvanized! Crjdewth Iispfx Adkeh Loading height approx. 1290mm! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, overall weight: 13,400 kg, empty load weight: 3,700 kg, maximum load weight: 9,700 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,410 mm, loading space height: 500 mm, first registration: 10/1998, next inspection (TÜV): 09/2024, suspension: steel, tire size: 205/65R17.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2-axle, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, underride protection, hydraulic ramps, front support, twin tires, pendulum flaps Body: Tandem 3-way tipper trailer with attachable hydraulic loading ramps 2x BPW-axle, drum brakes! Spare wheel not included in the price! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, modifications, prior sale and errors excepted! - . Crjdpfx Aswqn Nnodkoh

Condition: excellent (used), load capacity: 250 kg, Equipment: foot remote control, 250 kg load capacity welding positioner, 2 identical units available with 380mm or 400mm chuck, top condition electrically tiltable very robust Continuously variable speed from 0.15 to 2.0 rpm Csdpfswtrtcjx Adkjrh Current transmission 300 A Turntable diameter approx. 500mm Tilting up to 135° Height (horizontal) approx. 900mm, tilted to center approx. 800mm Length 950 mm x width 600 mm

Condition: new, Year of construction: 2020, CNC engraving machine MÜLLER LCF - 2 Travel: X 375 mm Y 570 mm Z 90 mm Technische0.321020121002 Daten: Table size 700 mm x 480 mm Weight: 50 kg External dimensions: Length: 700 mm Width: 500 mm Height: 350 mm Accessories : Calculator Screen Keyboard Mouse Software Control Kress cutter Vacuum pump Valve spray Codpof Tnf Ujfx Adkerh With it versch. Collets and cutters - NEW

Condition: used, Year of construction: 2007, Müller Martini Acoro A7 Year: 2007 / 2000 / 1999 Consisting of Gathering machine Müller Martini 3693 Year: 2007 Description: - Chain tensioning station - Hand feeding station - Number of gathering stations: 15 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - PIAB - Reject gate for incomplete products: 3715 Cjdpfx Adek H Sfhekjrh - Intermediate element - Book block feeder: 3642 - Transfer into the binder Perfect binder Müller Martini Acoro A7 - 3027 - 22 Year: 2007 Description: - Semi automatic setting - Colour monitor with touch screen - Book measuring table: 3013 - Number of clamps: 22 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - PUR spine gluing unit, interchangeable (nozzle) - PUR premelter for PUR spine glue unit: Meler Micron Pur - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Drum cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system Müller Martini Description: - Transport system, length (approx): 60 mtr - Escape delivery Three knife trimmer Müller Martini Merit S - 3671 Year: 2000 Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) Book stacker Müller Martini CB 16 - 3631 Year: 1999 Description: - Compensating stacker - Turning device - Delivery to the right

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1400 mm Measurements depth 3000 mm Machine weight 95000 kg This Müller HUQ 630.30 was manufactured in 2001. A robust mechanical stamping press with a nominal force of 6300 kN and a stroke rate of 15–60 strokes/min. It features a slide adjustment of 200 mm and can handle coil widths from 60 to 600 mm. Ideal for steel and aluminium, it supports a maximum coil weight of 6 tons. Consider the opportunity to buy this Müller HUQ 630.30 mechanical stamping press. Contact us for more information. Csdpjxg Unaofx Adkorh Application Types Stamping

Condition: used, overall weight: 10,000 kg, empty load weight: 2,500 kg, maximum load weight: 7,500 kg, axle configuration: 2 axles, loading space length: 5,200 mm, first registration: 09/2003, suspension: steel, tire size: 245/70R19,5 140/138J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R19,5 140/138J, rear tire size: 245/70R19,5 140/138J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 10 x lashing eyes, 600 mm drop sides, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Crjdpfxjxg I Its Adkoh

Condition: used, Year of construction: 1980, throat 350 mm stroke ca. 400 mm ram diameter 95 mm press capacity 25 t table depth 450 mm table width 1.500 mm table height 900 mm Crsdoxgu Itepfx Adkeh weight of the machine ca. 2,5 t dimensions of the machine ca. 2,0 x 2,0 x 2,3 m Straightening Press - Single Column MÜLLER - CR 25.2.1 - Power-On Hours: 543h - incl. working lamp

Condition: excellent (used), Year of construction: 2008, 300 Kg load capacity welding rotary table, with hollow shaft diameter 125mm with jaw chuck 320mm or 400mm very robust speed infinitely variable from 0,15 to 5,0 rpm current transmission 350 A diameter rotary table 400mm inclination up to 135 Crsdslamtbepfx Adkeh height horizontal 835mm, tilted to center approx. 735mm length 850 mm x width 580 mm

Year of construction: 2010, condition: used, Ref:10955 . 2010 Muller Martini 1511 Shingle belt delivery. Codpfxowmcc Io Adkorh

Condition: used, Year of construction: 2002, Saddle stitcher Müller Martini Presto Year: 2002 Feeders - Number of chain stations: 8 - Hand feeding station(s) - Horizontal signature feeders: 6 x 1551 (3 x 2) - Cover feeder: 1528 - Pump(s) Stitching unit Crjdpfx Aoip Eypedkjh Müller Martini Presto - Thickness control - Stitching heads: HK 75 - Delivery to the left - Reject gate, for incomplete products Trimmer Müller Martini 1522 - Sets of knives: 1 - Excluding delivery

Condition: used, Year of construction: 2007, Serial number: WMM000007005xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21444 Specifications: Not EU-approved 2007 model Good tires (see pictures) Loading ramps Steering on 1st axle Length: 1,095 cm Width: 255 cm Axle distance: 495 / 144 cm Curb weight: 6,070 kg Description:Muller machine trailer from 2007.Most of the tires were replaced last year.The trailer brakes sharply when empty but brakes more smoothly with some weight on it.Can be delivered on short notice. Technical approved: no EU-approved until: 09.11.2023 Own weight: 6070 Total Weight: 30000 Cedpfx Adexgm A Ajksrh Payload: 23930 Width: 255 Length: 1095 Model: Maskinhenger