Used Bending Tube for sale (4,823)

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Press capacity: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis travel: 620 mm Backgauge R-axis travel: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y-axis rapid traverse: 200 mm/s Y-axis working speed: 1-10 mm/s Y-axis return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC Control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable stop fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop points up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier Kljdpfx Ahjya Iaqo Nol - Operation via electrical foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for the lower tool, height 160 mm x width 60 mm, with 14 x 23 mm locating slot - TRUMPF tool system, without tooling Dimensions L x W x H: 0 x 2500 x 3400 mm Machine height: 3350 mm (max. height 3400 mm) Weight: 17,000 kg In good condition

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool Kjdpfx Ahoyazr Te Nsll -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 1500 mm / 1x 1000/500 mm each -Transport dimensions: 1000/143/H62 mm -Total weight: 31.5 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool Kodpfx Ahjyazqpo Njll -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 1500 mm / 1x 1000/500 mm each -Transport dimensions: 1000/143/H60 mm -Total weight: 30.8 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 3-piece -Type: PBS-H-SM-09 R=1 88° -Dimensions: see drawing in the photos -Total length: 2505 mm / 835/27/H170 mm each Kljdeyazmdepfx Ah Njl -Transport dimensions: 835/170/H81 mm -Total weight: 48.4 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Dimensions: see drawing in the photos -Length: 490 mm -Dimensions: 490/144/H30 mm -Weight: 10.8 kg Kljdpoyazhhofx Ah Nol

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool Kodpfx Ahjyazgds Nsll -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 682 mm / 1x 505/177 mm each -Transport dimensions: 682/143/H28 mm -Total weight: 13 kg

Condition: used, Used SRI BV approximately 3sqmt stainless steel vertical shell and tube heat exchanger. Has (27) 15mm inside diameter X 2,400mm long tubes 25 litre capacity rated -1.034/10 bar design pressure at 175 degC. 150mm diameter X 2,400mm long shell 26 litre capacity rated -1.034/10 bar design pressure at 175 degC. Unit has (2) bolted stainless steel heads. Mounted on (2) lugs. Last used as an beer column condenser. Equipped With: Kledpfx Aeyanv Seh Nel Per RD 17/06/25 updated description & raised price.

Condition: used, 3-roller bender Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm Ksdpfx Ahsuluhwo Njll

Condition: new, pressure 20 t stroke max. 200 mm bending capacity max. - flat 200 x 10 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 2,2 kW weight of the machine ca. 640 kg required space 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 20 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation Kledotq Du Ropfx Ah Nsl The HP 20 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: new, angle steel/side length / mm double T-iron on the x-axis / mm U-iron on the x-axis / mm total power requirement / kW weight of the machine ca. 1000 kg required space 1200 850 x 1200 mm The Gerd Wolff HPK-80 is a hydraulic profile and tube bending machine with 3 rollers. The machine is ideal for bending profiles, tubes and similar material. Model: HPK 65 Upper shaft diameter: Ø 60 mm Bottom shaft diameter: Ø 50 mm Roll diameter: Ø 180 mm Working speed: 6 m/min Motor power: 3.75 kW / 380 V Dimensions (L x W x H): 1200 x 850 x 1200 mm Weight: 1000 kg Standard Accessories: Steel construction welded frame 3 rolls are powered Hardened and ground shafts made of high tensile special steel Horizontal and vertical working position Hardened standard rolls Mobile control panel 3-axis mechanical lateral angle guide rolls Brake motor equipped for precision bending Digital read-outs (2 pcs) Klodpew Nbmpsfx Ah Nel Optional Equipment: NC control Hydraulic lateral guide rollers (2-axis) Spiral bending crane Special profile rolls

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Ksdpfsuddfbjx Ah Nell Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, pressure 10 t stroke max. 200 mm bending capacity max. - flat 150 x 6 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 1,1 kW weight of the machine ca. 400 kg required space 500 x 900 x 1150 mm The Gerd Wolff HP 10 is a hydraulic horizontal press machine with many many possible combinations. Whether it's bending tubes, punching profiles or cutting sheet metal, with the Klodpfxouddi He Ah Nsl right accessories the HP 10 is a multifunctional machine among presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 10 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, pressure 60 t stroke max. 300 mm bending capacity max. - flat 300 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 300 mm total power requirement 5,5 kW weight of the machine ca. 1530 kg The Gerd Wolff HP 60 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 60 is a multifunctional machine among all presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", Klodpfexfb Ikex Ah Njl by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Kedpeuddcaefx Ah Noll Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: ready for operation (used), machine for expanding and reducing tubes 3 heads Kljdpowrt Tzofx Ah Nol no tooling included (can be supplied on demand) Dimensions: 1500 x 2000 x 2000 mm Weight: 1600 kg

Condition: ready for operation (used), machine for expanding and reducing tubes 1 head no tooling included (can be supplied on demand) Stroke: 150 mm Kljdewrt Tuopfx Ah Nol Power: 11 kW Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg

Condition: ready for operation (used), machine for expanding and reducing tubes Kedowrt Tnepfx Ah Njll 2 heads

Condition: new, sheet thickness: 10bending length: 4100upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel Kjdpfxsd Ab Ryj Ah Njll - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 10.250,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Kodehmmfkopfx Ah Nell Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Klsdpfsxpqy Dox Ah Nel Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length Kljdpfx Asw Iq Ugsh Njl - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: excellent (used), Year of construction: 2018, sheet width 1040 mm plate thickness 3.00 mm ST diameter of upper rolls 100 mm side roll diameter 100 mm diameter of lower rolls 100 mm speed 6.0 m/min semi-automatic operated FM 2.1R voltage 400 V Klsdpsx U Emfsfx Ah Nsl total power requirement 2.2 kW weight of the machine ca. 740 kg range L-W-H 2250 x 825 x 1910 mm Very well-kept condition (almost as good as new)! current new price including accessories ~ 28.000 Euro special price on request Start and finish rounding is very easy with this machine thanks to the special concept, the extensive accessories and the robust construction. Machine for for one-off production and series production = extremely universal and economical. Equipment: - Robust electro-mechanical three-roll round bending machine - Driven by spur gear brake motor Primary reduction gear - Top roller Side roller electrically driven - Asymmetrical roll arrangement - Manual bottom roll adjustment * with analog position indicator - FASTI control unit "FM 2.1R" * Setting max./min. max./min. travel value side roller - Swing-out top roller, with hinged bearing - Conical bending device - 1x freely movable double foot switch * Right / left rotation of the rollers - Electrical safety device (cable) - original operating instructions

Condition: excellent (used), Year of construction: 2023, tube diameter 42.0 x 3.0 STAHL mm tube diameter 30.0 x 2.0 EDELST mm bending angle max. 180 ° bending radius max. 100 mm bending speed 2.0 U/min. Control NC voltage 400 V total power requirement 0.55 kW weight of the machine ca. 115 kg Current new price approx. 4.200 Euro Very good condition / with machine base Description: - NC electro-motor tube bending machine - mandrelless * up to 50 programs can be stored - Automatically returns to the starting position - Maximum bending capacity for 42 x 3.0 mm steel tubes - Excellent bending quality with very tight bending radii (from 2x tube diameter) . and bending angles between 0° and 180° - Easy operation - High accuracy and reliability Kljdpjx U El Iofx Ah Njl - Quick tool change (within seconds) - Easy to transport - Includes machine base

Condition: used, Year of construction: 1970, plate thickness max. 1,5 mm sheet width max. 1.020 mm Year ca. 1970 manual ja ja ja +++++ Kljdpfsx U Dakox Ah Nol Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1988, working width 2000 mm sheet width - max. 3 mm diameter 120 mm weight 700 kg Kjdpfox U A Tpox Ah Noll