Used Bath Shelf for sale (1,888)

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Iijdoxhfl Eepfx Apcog Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Year of construction: 2015, operating hours: 4 h, condition: used, functionality: fully functional, Equipment: CE marking, The equipment neutralizes hazardous gases specified in the requirements provided by the owner to secure emission of clean air. Sold as a complete system together with the chemical reactor, the electrolytic block and the waste water treatment system. The whole system is suitable for obtaining and cleaning of Cu, Au, Ag, Pd, Pt. The system includes 12 transformers for electrolytic baths (including 84 baths), complete pipe system, installed, can be tested and inspected. It contains neutralizer and automatic operation system. It was operating 2-4 hours during test run. The whole system is in new state. Ijdpfszmqv Hsx Apcoig

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: M0335, Cyril Bath type 20 T Hydraulic Swing Arm Profile Stretch Forming Machine year 1997 serial number M0335 capacity 20 t engine power 126 kW electric connection 400 V description With control Cyril Bath Monitor Type: Flexscan 685 12 CNC axes 4 auxiliary axes Iiodpfeqcu Acex Apcsg Stretching force 20–200 kn Bending angle 2 x 95 degrees Rotation stretching cylinder 2x –45/225 degrees Component length from 762 to max 3810 mm Hydraulics from Rexroth with 2 x hydraulic pumps: 45 kW each Various spares available

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 12 276 / REV 13 976, power: 30 kW (40.79 HP), overpressure (max.): 0.5 bar, tank capacity: 110 l, No minimum price – guaranteed sale to the highest bidder! The distillation unit underwent an overhaul in 2024. TECHNICAL DETAILS Capacity: 110 l Water jacket volume: 180 l Ijdpfx Ajzzmk Aepceig Operating overpressure: 0.5 bar Heating method: Electric heating elements MACHINE DETAILS Machine type: Column still with water jacket Power: 30 kW

Condition: used, Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Iisdpfjxv Ayvjx Apcjg Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Heating Power: 0.35 kW Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Condition: excellent (used), Year of construction: 2019, functionality: unexamined, total height: 2,775 mm, shelf length: 2,000 mm, carrying capacity per cantilever arm: 1,000 kg, load capacity per stand: 3,000 kg, number of shelf rows: 6, We offer this very well-maintained ArmStrong SwingOut® heavy-duty long-material storage system (DBGM), manufactured in 2019. Manufacturer: ArmStrong SwingOut® Model: Heavy-duty long-material storage system (DBGM) Year of manufacture: 2019 Condition: very good If you have any questions or require further information, please feel free to send us a message or call us. Technical specifications: Iiedjz Dap Ijpfx Apceg Single-sided design 2 uprights, bay width 2,000 mm Overall height: 2,775 mm Load capacity per swivel arm: 1,000 kg Useful load per swivel level: up to 3,000 kg (manually operated) 6 swivel levels + top level Usable depth: 750 mm Height of the uppermost shelf approx. 2,500 mm Shelf heights adjustable in a 75 mm grid Ideal for storing pipes, profiles, bar stock, and other long materials. Used, well-maintained condition. Inspection possible by appointment. The shelving system can, of course, also be expanded. (Original price: €20,500)

Condition: used, clear span: 2,880 mm, total length: 32,880 mm, total height: 3,650 mm, load per truss pair (max.): 1,600 kg, number of shelf rows: 1, Technical data for the pallet racking system: Racking system: Hovuma Technical data for the installation: Number of racking bays: 1 unit Length per racking bay: approx. 32,880 mm Number of bays per racking bay: 11 units, each 2,880 mm Number of levels including the base level: 03 units Included in the scope of supply: 12x Pallet racking uprights, used Material color: green Upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces Iiodez A Ac Ujpfx Apcsg and load distribution plate Overall length: approx. 930 mm Internal width: approx. 102 mm The uprights are pre-assembled (welded frame) 3,650 mm high 870 mm deep 66x Pallet racking beams, used Material color: green INP profile: 80 x 42 mm Clear width: 2,880 mm Max. load per pair of beams 1,600 kg with evenly distributed load 132x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting 48x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 24x Shims, used Design: fully galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,310 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 131 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Iijdpezy Utpsfx Apcsg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,280 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 128 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 128.1 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Iijdpfx Aszy Uyvepcjg Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, functionality: fully functional, total width: 28,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, This used Nedcon pallet racking system is a stable and space-saving solution for industrial storage requirements. The heavy-duty racking is ideal for warehouses, logistics, industry, workshops, and freight forwarding companies. With the durable Nedcon PR2 crossbeams and matching frames, the racking system offers a reliable way to store Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 350 cm Depth: approx. 110 cm Length: approx. 28 running meters Shelf load: up to 3,000 kg Field load: up to 9,000 kg Crossbeams: approx. 270 x 11 x 4 cm PR2 Product number crossbeams: CC1104015 Frames: approx. 350 x 110 cm, pre-assembled Frame color: Blue Crossbeam color: Orange Levels: Ground + 2 Pallet spaces: 90 incl. ground spaces Condition: Used Nedcon DELIVERY SCOPE: 11 x Frames approx. 350 x 110 cm, pre-assembled 40 x Crossbeams approx. 270 x 11 x 4 cm PR2 80 x Locking pins Depending on current stock, we can also offer you suitable Nedcon frames with a height of approx. 400 cm. Price: €1,760.00 Net €2,094.40 Gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams optional - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible Iijdpozz Igfefx Apcsg PLANNING & CONSULTATION: Our planning department will gladly create a non-binding offer for you – tailored to your requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking, shelving, and other solutions on site. Many systems are set up and can be experienced directly. Our specialist consultants are happy to answer your questions and provide individual advice – we look forward to your visit! Haven't found the right one yet? Visit our website, where you can quickly see an overview of many offers & variations of the products! ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us by message or phone. You can find our phone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, clear span: 3,300 mm, total length: 17,100 mm, total height: 2,500 mm, load per truss pair (max.): 1,750 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 17,100 mm Number of bays per racking row: 05 units Number of levels including the base level: 02 units Technical data for the capacity: Pallet spaces per bay: 12 units Pallet spaces per row: 60 units Total pallet spaces: 60 units Based on: Load support: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: not specified Weight per pallet (max.): 435 kg Included in the scope of delivery: 06x Pallet racking uprights, used Material color: blue Upright profile dimensions: 100 x 69 x 2.0 mm Upright type: M-101 Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,500 mm high 1,100 mm deep Iiedpfjz A A Dlsx Apcsg 20x Pallet racking beam, used Material color: RAL 2001 orange Beam type: TB-S120 Box profile: 120 x 50 mm Clear span: 3,300 mm Max. load per beam pair 1,750 kg with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal members against unintentional lifting 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Design: completely galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Technical specifications: Number of pistons: 4 Piston diameter: 60 mm Shelf dimensions: 1000x2500 mm Clearance: 480 mm Iisdpfszh U N Hex Apcsg Hydraulic clamping system Safety switch Motor power: 1 kW Power supply: 400 V Overall dimensions: Length: 2800 mm Width: 1220 mm Height: 1980 mm

Condition: used, clear span: 3,595 mm, total length: 18,575 mm, load per truss pair (max.): 2,650 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of racking bays: 01 unit Length per racking bay: approx. 18,575 mm Number of bays per racking bay: 05 units Number of levels including floor level: 02 units Technical data for volume: Pallet spaces per bay: 12 units Pallet spaces per row: 60 units Total pallet spaces: 60 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): 660 kg Included in the scope of supply: 06x Pallet racking uprights, used Material color: blue Upright profile dimensions: 100 x 69 x 2.0 mm Upright type: M-101 Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) 2,500 mm high 1,100 mm deep 20x Pallet racking beams, used Material color: RAL 2001 orange Beam type: 2C-S 1315 Box profile: 130 x 50 mm Clear width: 3,595 mm Iiodoz A A Aujpfx Apcjg Maximum load per beam pair: 2,650 kg with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign With information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 2,880 mm, total length: 12,450 mm, total height: 3,930 mm, load per truss pair (max.): 1,600 kg, Technical data for the pallet racking system: Racking system: Hovuma Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 12,450 mm Isdpfxoz Az Txj Apceig Number of bays per racking row: 04 units, each 2,880 mm Number of levels plus base level: 03 units Included in the scope of delivery: 05x Pallet racking uprights, used Material color: blue Profile dimensions: C 70 x 40 x 12 x 3.0 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (welded framework) 3,930 mm high 870 mm deep 24x Pallet racking beams, used Material color: green INP profile: 80 x 42 mm Clear span: 2,880 mm Max. load per beam pair 1,600 kg with evenly distributed load 48x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 20x Bolt anchors, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Material: Carbon steel, galvanized Approved for: Cracked concrete 10x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 103000050, load capacity: 250 kg, Equipment: documentation/manual, The MiR250 is a more flexible AMR – compact and powerful. The MiR250 features a small footprint of just 580 x 800 mm and a height of only 30 centimeters. Despite its size, it easily transports loads of up to 250 kg and can travel at speeds of 2 meters per second. This agility sets it apart from all other AMRs on the market and makes it particularly adaptable to demanding environments. Thanks to its compact design, it can navigate spaces with a width of just 80 centimeters. This means that doors and elevators, which might pose a challenge for other mobile robots, are no obstacle for the MiR250. Iiedeyf Etxopfx Apcjg The MiR250 is engineered for durability and can operate around the clock, with a battery that can be replaced quickly. Additionally, it meets the latest safety standards – which is why we believe it is the safest AMR on the market. It has so far only been used in laboratory conditions and has virtually no operating hours. Accessories: - Cable Charger Lite 48V, 3A, wired charger - WISE WLAN EA module 4060, 4x digital inputs, 4x relay outputs

Year of construction: 2011, condition: excellent (used), 2 pneumatic shelf presses for edging and veneering. Type PNP Working area: 1250x2500 mm Weight: 1940 kg Iiodpfey Avb Asx Apcjg Presses are fully operational and in use. For any questions, please contact: Piotr Żołnierczyk - 606 666 023

Condition: used, functionality: fully functional, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and safe warehouse storage. This heavy-duty racking system is ideal for warehouses, industrial companies, and logistics operations that require robust and durable racking for storing Euro pallets. The proven PR600 design offers high load-bearing capacity, maximum flexibility, and is perfectly suited for storing heavy goods. Buying used here means: certified brand quality at a particularly attractive price – immediately available for new installations, retrofitting, or expanding your existing racking system. Customizable: The racking frames (Type P120) can be rebuilt to your desired height – professionally and precisely in our workshop. We provide made-to-measure racking solutions for every warehouse requirement. PRODUCT DETAILS - Height: approx. 9.85 m - Depth: approx. 105 cm - Length: approx. 10,100 cm - Shelf load: 3,000 / 3,500 kg (depending on version) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 4 - Pallet spaces: 540 incl. floor spaces - Version: Used SSI Schäfer PR600 - Availability: Immediately available from stock, multiple sets in stock SCOPE OF DELIVERY: - 037 × frames approx. 9.85 × 1.05 m, galvanized, pre-assembled - 288 × beams approx. 270 cm (INP100 or CE110) - 576 × safety pins Price: €11,844.00 net €14,094.36 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: Iiedpfx Apozy Ugcocsg - Nationwide delivery across Germany via our partner shipping company – freight costs depend on postal code - Professional installation and dismantling by trained teams is optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding quote tailored to your requirements. Whether new build, modification, or extension – we provide competent advice for your racking configuration. SHOWROOM: Visit us in our showroom! On site, you can get a comprehensive impression of our pallet racking, shelving, and other solutions. Many systems are assembled and ready to view. Our specialist advisors are available for questions and individual advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You’ll find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, Year of construction: 2016, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Iodpjya H Uyofx Apceig

Condition: used, Year of construction: 2011, SMC Deutschland GmbH Temperature Control Bath, Water Cooled, INR 244 713D Model: INR244713D Condition: Used Technical Specifications: Thermo-Con 220-230VAC 50/60Hz General Information: Iijdpfx Aox I Al Espcog SMC Thermo-Con Temperature Control Unit (TCU), removed from ASML Yieldstar S-200B. Cooling/temperature regulation (MCW/PCW) for optics, electronics, sensor applications ASML 4022.639.27493

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity per storage section: 12,000 kg, total length: 300,000 mm, total height: 6,500 mm, support length: 2,700 mm, load capacity: 3,050 kg, frame height: 6,500 mm, frame width: 1,100 mm, 300 linear meters of Nedcon pallet racking 🧰 Product features: • Manufacturer: NEDCON • Color: galvanized / blue / orange • Condition: new, see photos • Frames: 126 units, pre-assembled, 650 x 110 cm • Beams: 750 units, with 270 cm clear width, box profile 110 x 40 mm • Safety: 1500 units, galvanized safety pins Iijdpfx Ajrpk Igspceg • Fasteners: 504 units, Hilti concrete anchors • Load capacity: 3,050 kg per level • Field load: 12,000 kg • Load capacity sign: included Over 5,000 linear meters in stock Frame heights up to 7 meters Available beam lengths: 182.5, 270, 330 and 360 cm Matching deep uprights, infill grids and infill shelves available on request 💰 Price: € 57,950,- net, excluding VAT • Quantity discount: on request • Shipping costs: available throughout Europe, on request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10124 Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & used & new heavy-duty racking Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers in new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY SALES: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a real all-round carefree package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including broom-clean clearance. 2. Commission auction: Carrying out auctions on behalf of the client. Our full service through our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and broom-clean handover. Whether you found us through a heavy-duty racking search on Maschinensucher or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, functionality: fully functional, total length: 30,000 mm, total height: 6,000 mm, shelf height: 1,500 mm, shelf length: 271 mm, frame height: 6,000 mm, frame width: 120 mm, Industrial shelving that will be disassembled next Wednesday, August 12th. Iedpfozr H Sbjx Apcoig

Condition: used, Shelf press Tiger 1000x2200 19/26 Iiedpfx Aezkh H Rspceg

Condition: used, functionality: fully functional, total width: 14,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, This used Nedcon pallet racking system is a robust and space-saving solution for industrial storage requirements. This heavy-duty racking system is ideal for warehouses, logistics, industry, workshops, and forwarding agents. With the durable Nedcon PR2 crossbeams and matching frames, the racking system offers a reliable way to store Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 350 cm Depth: approx. 110 cm Length: approx. 14 linear meters Shelf load: up to 3,000 kg Bay load: up to 9,000 kg Crossbeams: approx. 270 x 11 x 4 cm PR2 Iiodpfxszy Uhme Apceg Product number crossbeams: CC1104015 Frames: approx. 350 x 110 cm, pre-assembled Frame color: Blue Crossbeam color: Orange Levels: Ground + 2 Pallet spaces: 45 incl. ground spaces Condition: Used Nedcon DELIVERY SCOPE: 06 x Frames approx. 350 x 110 cm, pre-assembled 20 x Crossbeams approx. 270 x 11 x 4 cm PR2 40 x Locking pins Depending on current stock, we can also offer suitable Nedcon frames with a height of approx. 400 cm. Price: €920.00 Net €1094.80 Gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams, optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your requirements. Whether it is a new construction, renovation or extension – we will advise you competently on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! Here you can get a comprehensive picture of our pallet racking, storage racking and other solutions. Many systems are set up and can be experienced directly. Our technical consultants are available to answer your questions and provide individual advice – we look forward to your visit! Haven't found what you're looking for yet? Visit our website, where you will find a quick overview of many offers & variations of the products! ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Simply contact us by message or phone. You will find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and your number, and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2022, load capacity: 2,700 kg, Dexion pallet racking – galvanized frames and beams, 3300 mm We offer for sale a large batch of Dexion pallet racking, intended for storing industrial pallets, among other applications. Available components: Frames: galvanized construction, Isdpfezrnpbjx Apcoig approximately 400 units, various heights available upon prior agreement. Beams: length: 3300 mm, profile: 130 × 50 mm, galvanized construction, load capacity: 3 × 900 kg, i.e., up to 2700 kg per level, approximately 4000 units. The large availability of components allows for the preparation of both individual racking bays and a complete racking installation for a large warehouse. It is possible to purchase the entire batch or a selected number of components. We also offer configuration design, transport, disassembly, and installation of the racking. Please contact us to receive a detailed specification, photos, and an individual quote.

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers sufficient space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 100.06 linear meters of shelving units, 40cm deep, used, workshop shelving, warehouse shelving, hand-stacking, boltless shelving, small parts storage. Data: - Height: approx. 250 cm Isdpszy Utisfx Apcjig - Depth: approx. 40 cm - Length: approx. 100.06 linear meters Shelving offer of 100.06 linear meters consisting of: - 0101 x uprights approx. 200 x 40 cm, pre-assembled - 0600 x shelves approx. 100 x 40 cm. - 2400 x shelf supports. - 0100 x cross braces - Manufacturer: META CLIP. - Load capacity: 100 kg per shelf, with evenly distributed load. - Levels: 6 storage levels. - Surface: Sendzimir galvanized. - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €7,118.00 net plus legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery can be arranged via our partner logistics company, if desired. The costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Let us know your requirements... We will be happy to help you realize your projects, from planning to ordering to assembly. Are you interested or do you have any questions? Simply contact us via message or phone. You will find our telephone number on our company page. ☎️ You can reach us by telephone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.