Used Bandsaw Horizontal for sale (6,158)

Condition: used, Used Buhler horizontal hammer mill. - Carbon steel rotor has diameter approximately 980 mm. - Rotor is divided into 3 section. Dedpfx Acoygvnve Nokh - Rotor has (8) shafts, each shaft is equipped with (10) swing hammers. - Rotor is driven by 75 kW, 380/660 V, 1480 rpm, 50 Hz electrical motor. - Includes number of spare screens and switchboard.

Condition: used, Used Comi Condor type HX/GMP 316L stainless steel Atex rated horizontal peeler centrifuge. Unit has 1150mm diameter perforated basket. Maximum speed 1,400 rpm with load 280kgs and maximum cake capacity 222 litre. Internal rated +0.5/-0.5 bar design pressure at 50 deg.c. Unit has main drive, hydraulic powerpack, mounting springs and (2) control cabinets. Dkodpfeygva Eox Ac Neh Specifications: Basket Volume / Capacity: 58.7 gal Basket Diameter: 45.3" Material Of Construction: Stainless Steel Speed Of Basket: 1400 Type Of Drive: main drive, hydraulic powerpack Type Of Enclosure: Atex rated

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 70 t, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Dksdpfxsyh Hlls Ac Njh Pressing force: 700 kN Specific pressing force: 58 N/cm² Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: used, Year of construction: 2009, Offered here is a used machining center from the manufacturer Deckel Maho DMG. The machine is powered up and can be inspected at our facility. Free loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel distances X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Max. rotation of table plate: 30 rpm Spindle speed: 20 - 8,000 rpm Gear stages: 2 Max. workpiece diameter: 1250 mm Max. workpiece height: 1580 mm Clamping surface: 800 x 800 mm Max. workpiece weight: 1,500 kg Dsdpfew Ew T Sox Ac Nekh Weight of pallet: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Max. tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30 bar (new) 1x ZAHNRADP-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox *F1C-A25 (new) 1x Conversion kit power module (new) 1x Lifting devices for the machine

Condition: excellent (used), Year of construction: 2014, operating hours: 67,011 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, For sale: HELLER H2000 Horizontal Machining Centre (2014) 🔹 Manufacturer: HELLER 🔹 Type / Model: H2000 🔹 Serial Number: 53711 🔹 Year of Manufacture: 2014 🔹 Machine Type: Horizontal Machining Centre 🔹 CNC Control: Siemens 840D sl Operating Hours Connection time: 67,011 h Spindle operating hours: not available Basic Technical Data Table size: 500 × 400 mm X-axis travel: 630 mm Y-axis travel: 630 mm Z-axis travel: 630 mm Max. workpiece height: 850 mm Max. workpiece weight: 600 kg Rapid traverse (X/Y/Z): 65,000 mm/min Max. spindle speed: not available Equipment ✅ Rotary table – 2 × 500 × 400 mm ✅ Tool magazine – 54 stations ✅ Siemens 840D sl control Dimensions and Weight Machine dimensions (approx.): 6,300 × 2,750 × 3,400 mm Weight (approx.): 9,400 kg Power supply: 400 V Description The HELLER H2000 Horizontal Machining Centre, manufactured in 2014, is a robust and efficient machine designed for precise machining of medium and larger-sized components. The HELLER construction ensures high rigidity, accuracy, and reliability in both series and single-part production. Dkedpfxoyh Ea Ie Ac Noh This machine is ideally suited for manufacturing plants, toolshops, and companies in the automotive and industrial sectors.

Condition: used, functionality: fully functional, Horizontal block bandsaw BÖGLI ARL150 with hydraulic clamping carriage including complete ALBER sharpening machine with back grinding device. The ideal machine for processing large logs. Cutting thickness is entered via a 'Mudata' control unit. A ripsaw for splitting is mounted directly on the saw frame. Blade wheel diameter: 1,500 mm Blade wheel width: 170 mm Cutting length up to 8 m Max. clearance: 1,900 mm 5 hydraulic clamping fixtures 3 hydraulic log turners Dsdpfx Aoxp Hzdoc Njkh Saw drive power: 45 kW Feed drive, frequency controlled: 5.5 kW (wire rope drive) The machine has been professionally dismantled by our skilled personnel and can be inspected in our warehouse by appointment.

Condition: used, Year of construction: 1998, functionality: fully functional, Used, complete, fully functional block wagon ARTIGLIO CI700 with 6 hydraulic clamps including drive unit. The wagon can be inspected at any time by prior appointment. Dksdpfsxbpc Iex Ac Neh

Condition: new, Year of construction: 2026, Three-phase 400V motor with frequency converter (kW) 3 Saw blade dimensions (mm) 5200 x 34 x 1.1 Flywheel diameter (mm) 480 Cutting speed (m/min) 20 – 120 Clamping width (mm) 610 Working height (mm) 780 Machine dimensions without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard features Ergonomically designed, robust welded frame construction for miter cuts from 0° to 60° right/left Sturdy, low-vibration frame construction with arm joint mounted on plain bearings Clearly arranged control panel on the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for maximum cutting performance Cutting Accuracy Requirements Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed: hydraulic including automatic cutting pressure regulation Miter adjustment and clamping (manual) Hydraulic full-stroke cylinder for vise (pull-down version) Floating vise Blade tension and saw blade breakage monitoring Easily removable chip collection trays Hydraulic blade tension indicator Integrated coolant supply (30 l tank capacity) LED work light Digital miter indicator Including saw blade with 3/4 combi-toothing Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 12-month warranty for single-shift operation Dkedpfxjukgiqe Ac Neh Please inquire about additional accessories. DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 2016, operating hours: 60,546 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, nominal power (apparent): 40 kVA, torque: 96 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece width (max.): 850 mm, workpiece height (max.): 850 mm, workpiece diameter (max.): 720 mm, workpiece weight (max.): 800 kg, total height: 3,400 mm, total length: 6,300 mm, total width: 2,750 mm, table width: 500 mm, table length: 400 mm, rotational speed (max.): 16,000 rpm, overall weight: 10,000 kg, Machine make / model: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control: Siemens 840D SL Spindle: SC63, 16,000 rpm, 40 kW, 96 Nm Tool clamping system: HSK63 Magazine / positions: Chain magazine / 240 positions Dedpeyglrqjfx Ac Nskh Comfort operator terminal, main-time parallel setup Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options / special features: Drill breakage monitoring (SBBK); FMS interface, infrared receiver touch probe (Renishaw), extraction interface; Coolant chiller

Condition: used, Year of construction: 2016, operating hours: 59,654 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, nominal power (apparent): 38 kVA, torque: 242 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece width (max.): 850 mm, workpiece height (max.): 850 mm, workpiece diameter (max.): 720 mm, workpiece weight (max.): 800 kg, total height: 3,400 mm, total length: 6,300 mm, total width: 2,750 mm, table width: 500 mm, table length: 400 mm, rotational speed (max.): 10,000 rpm, overall weight: 10,000 kg, Operating hours: 59,654 Year of manufacture: 2016 Control: Siemens 840D SL Spindle: PC63 10,000 rpm, 38kW, 242 Nm Tool clamping system: SK40 Magazine / stations: Chain magazine / 160 stations Comfort operator terminal, main-time parallel setup Rotary table: 360.000° X 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, features: Drill breakage control (SBBK); FMS interface, infrared receiver touch probe (Renishaw), extraction interface, coolant chiller Dksdpfsygln Ssx Ac Noh

Condition: used, Year of construction: 1973, machine/vehicle number: 959, Horizontale Trennsäge / Horizontal Band Saw Jllig TS 100 VBaujahr / Year 1973 - Serial-No. 959 Arbeitsbreite / Working width max. 590mm Ersatz Sägeblatt / Spare Saw band Stufenlose Höhenverstellung des Sägebandes / stepless height adjustment of saw band Djdpfx Aermul Sec Njkh Stufenlos regelbarer Antrieb / stepless adjustment drive Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1987, machine/vehicle number: 33879, Stehendbogenauslage - Horizontal Stack Delivery with Pressing Stahl SBP 46Year 1987 - Serial-No. 33879/87-134584 Dodpfxoh Aygfs Ac Nokh Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Bündelpresse / Bunch Press - horizontal La Fornigrafica BPHydraulische horizontale Bündelpresse / hydraulic horizontal bunch Press Pressdruck stufenlos einstellbar / Pressure steppless 0 – 2.500 kg Einsatzlänge / Infeed length max. 820mm Pressplattengrösse / Press plates size 340 x 260 mm Online-Video-Inspection by Skype-Video Djdpfjh R Udwsx Ac Njkh We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1979, machine/vehicle number: 14256, Stehendbogenauslage mit Presswalzenauslage - Horizontal Stack Delivery with Pressing Stahl SBP 40Year 1979 - Serial-No. 14256/79 Size width max. 400mm Vertical press delivery -modified with SELFControl- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Dedpjrgbz Esfx Ac Nokh On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1994, machine/vehicle number: 49504, Stehendbogenauslage mit Markiereinrichtung - Horizontal Stack Delivery with Pressing - Marking Stahl SBP 46.2Year 1994 - Serial-No. 49504/94-218513 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Dedpjh Ax S Defx Ac Nokh

Condition: used, Year of construction: 1998, machine/vehicle number: 106026, Horizontal stack delivery with pressing and marking device Heidelberg SBP 46.D + MKE.DYear 1998 - Serial-No. 106026/98-263536 Sheet size min. (width × length) 120 × 100mm Sheet size max. (width × length) 460 × 300mm Product thickness max. 4mm Djdpfx Aceh Axhds Nekh Pile length 800mm Pressing force 8,000 N Infeed height 360-960mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Bündelpresse / Bunch Press - horizontal Tränklein BPHydraulische horizontale Bündelpresse / hydraulic horizontal bunch Press Dkedpfx Ajiwg A Ejc Noh Pressdruck stufenlos einstellbar / Pressure steppless 0 – 2.500 kg Einsatzlänge / Infeed length max. 770mm Pressplattengrösse / Press plates size 290 x 220 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, controller manufacturer: Siemens, controller model: Sinumerik 804D, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, Horizontal machining center DMG MORI NHX 4000 with 2-pallet changer Year of manufacture: 2017 Control: Celos with Sinumerik 840Dsl Operate Program run hours: 21,000 h Technical data: Dkodpfxjyghq Ao Ac Nsh Spindle speed: 10 – 20,000 rpm (speedMASTER® motor spindle) Drive power: 35/25 kW Torque: 130/85 Nm Tool holder: HSK 63 Magazine positions: 60 – ring magazine Travel paths: X-axis: 560 mm Y-axis: 560 mm Z-axis: 660 mm C-axis: 0.001° Pallet size: 400x400 mm Equipment: 2-pallet changer Coolant system for through-spindle coolant (IKZ) 70 bar Chip conveyor Renishaw 3D probe

Condition: used, Technical details: x-travel: 450 mm y-travel: 150 mm z-travel: 400 mm distance between column - table edge: min./max.: 100 / 250 mm turning speed range: 25, 44, 78, 130, 228, 400 / 6 step U/min feed:: X/Y: 10 - 100 / 8 step mm/min Table dimensions: 990 x 300 mm table surface area: 800 x 195 mm table swivelabel +/-: 30° ° total power requirement: nicht bekannt kW Dkjdpfxeu Nc Nle Ac Njh weight approx.: 1200 kg dimension machine xH: 1,5 x 1,3 x 1,5 m Horizontal milling machine, currently a tool clamped milling arbor Ø 32mm with hobbing cutter. Machine vice included. *

Condition: used, Technical details: x-travel: 1000 mm y-travel: 350 mm z-travel: 400 mm distance between column - table edge: min.150 / max. 550 mm Dkodpfsv Sz Diex Ac Nsh turning speed range: 28 - 1400 / 18 step U/min tool taper: SK40 spindle head swivable left - right: 90° und vor/zurück: 45° ° feed:: X/Y-Achse: 16 - 800 / 18 step mm/min Table dimensions: 1600 x 400 mm table surface area: 1400 x 330 mm total power requirement: 14,5 kW weight approx.: 4000 kg dimension machine xH: ca. 2,0 x 2,4 x 1,85 m

Condition: used, Year of construction: 1986, Technical details: cutting diameter: 320 mm saw band length: 5320 mm saw band width: 32 mm cutting range 90 degrees: round: 320 mm cutting range 90 degrees: flat: 320 x 320 mm Dsdpsu Nii Sofx Ac Nekh control: Serie P 9521 height over floor: 730 mm band speed: 15 - 110 m/min total power requirement: 4,9 kW machine weight approx.: 2200 kg dimension machine xH: 1,9 x 2,95 x 1,8 m Heavy-duty hydraulic production band saw in 2-column design - fully automatic Application for: Solid and profile materials made of steel as well as cast iron, light and non-ferrous metal Hydraulic material feed, hydraulic clamping of the clamping jaws Length measurement via precision glass measuring rod length 400mm Max. cut-off length preselectable 9999.9mm Automatic multiple stroke Saw band cleaning brush + 1x spare brush Chip conveyor Coolant device *

Condition: used, Technical details: cutting diameter: 260 mm saw band length: 2925 mm saw band width: 0,9 mm cutting range 90 degrees: round: 270 mm cutting range 90 degrees: flat: 350x240 mm cutting speed: 35/72 m/min height over floor: 1,050 mm total power requirement: 1,9 kW machine weight approx.: 660 kg dimension machine xH: 1,2 x 0,75 x 1,05 m Bandsäge - Halbautomat schwere Industriebandsäge mit Rollenbahn Dkedpfx Ajv T Tcmoc Nsh Gehrungsschnitt möglich hydr. Werkstückklemmung i.D. *

Condition: used, Year of construction: 1991, Technical details: cutting diameter: 240 mm saw band length: 3000 mm Dodpfju Nihuox Ac Nokh saw band width: 20 x 0,8 mm cutting range 90 degrees: round: 240 mm band speed: 20; 35; 50; 70 m/min total power requirement: 1,8 kW machine weight approx.: 330 kg dimension machine xH: 1,9 x 1,1 x 1,1 m hydraulic operation clamping jaw size 150 x 100mm, manual clamping (hand wheel) 1 transport roller each before and after vice support incl. 4 pieces band saw blades incl. 2 pieces roller tables (2000 x 520 x 750mm and 1000 x 520 x 750mm) incl. limit 3000mm *

Condition: used, Year of construction: 2001, Palet size 600 x 600 mm X/Y/Z - 1050/800/880 mm Spindle speeds 7000 rpm Spindle taper ISO 50 Dksdpfx Asyhzcroc Neh Tool changer w/80 stations Control: Mazatrol PC-Fusion 640 M

Condition: used, STC Film Wrapping machine, Machine used for packing champignon. Dsdpfx Ajc Nlxrjc Nokh Capacity 40-80 pack/min.