Used Ball Transfer Units for sale (36,146)

Condition: used, HB-Therm HB-100 U1 temperature control unit, Temperature control, Liquid temperature control, Industrial temperature control, Thermolator, used machine Manufacturer: HB-Therm Type: HB-100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Kedpfx Asyzmagoh Eedt Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: water

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Ksdpfothuzpjx Ah Ejdt Overall height 1050 mm dead weight 28 ton. good condition

Year of construction: 2009, condition: good (used), Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station -Manufacturer: Grenzebach, conveyor belt type ZFT lifting unit -Drive: Siemens, 0.25 kW1380/35 rpm Kdedotrhmijpfx Ah Ejt -Intermediate dimension: 760 mm -Conveyor belt length: 1400 mm -Belt spacing: 500 mm -Lifting height: 280 mm -Transport dimensions: 1450/1240/H1070 mm -Weight: 271 kg

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Kedpjy St Urefx Ah Eedt

Condition: good (used), 3x pallet transfer station, safety gate, pallet transfer area – used: Price per unit: €650.00 (net) ex-works, disassembled, packed, and loaded! Manufacturer: unknown Type: unknown Year of manufacture: unknown, likely 2013 Clear internal width: approx. 2.45 m Kjdpfx Ahozv Iqae Eodt Condition: good to very good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm Ksdpfxou Idv Ds Ah Ejdt dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm Kedpfx Asu Idvwsh Eodt dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, “Functionally tested; item comes from the dismantling of equipment from an automotive supplier.” 6 units available Manufacturer: Zebra Technologies Model: ZT230 Printing process: Thermal transfer / Direct thermal Kjdszhnxuspfx Ah Esdt Resolution: 203 dpi Print width: up to 104 mm Print speed: up to 152 mm/s Interfaces: USB, RS232, Ethernet (optional) Material compatibility: Labels, continuous material Special features: Robust metal housing, LCD display

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-03, Temperature control unit by gwk, pre-owned and untested. Designed for mold temperature control, injection molding, and industrial process technology applications. Operates as a single-circuit system with the Logotherm control system. The unit uses water* as the heat transfer medium, with a maximum supply temperature of 30 °C*. Heating capacity is not specified; pump capacity is 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Kdodoy Su Aqjpfx Ah Ejt

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Manufacturer: KNAPP STREAMLINE Year of construction: 2010 Drive: SEW-Eurodrive motor Cross roller conveyor DPP - Dynamic positioning platform Kjdpfxof Arpbj Ah Ejdt Motorized roller conveyor equipped with sensors. Dynamic material positioning - incoming boxes, crates or trays can be positioned, rotated or conveyed to the exact location by the system. Direction change, distribution - the unit can move the goods in different directions, to other tracks or machines. Stopping and waiting - can also serve as an automatic buffer. Transfer roller part: Length: 765 mm Width: 325 mm Transfer roller diameter: 50 mm Conveyor roller part: Length: 335 mm Width: 325 mm 4 support rollers: 50x310 mm Overall unit size: Width: 800 mm Length: 1250 mm Height: 530 mm

Condition: good (used), Year of construction: 2014, 4x pallet transfer stations, safety gate / swing gate – used: Price per unit ex warehouse: €750 (net), disassembled, packaged and loaded! Manufacturer: unknown Type: unknown Year of manufacture: 2014 Minimum 2x yellow stations Internal width approx. 3.20m, depth approx. 1.60m, height approx. 2.60m Minimum 2x galvanized stations Internal width approx. 3.18m, depth approx. 1.60m, height approx. 2.60m Condition: good Available: from approximately Q4 / 2026 Location: Hamburg Kdodpfozq Aalsx Ah Eot

Condition: excellent (used), functionality: fully functional, Selling an original Homag Group glue application unit (upper part with glue application roller and drive coupling) for edge banding machines of the Brandt / Homag brand. Kdodjy Uv Umepfx Ah Eot The unit is in good, clean condition with normal signs of wear and tear (see article photos). It features the practical quick-change system, including the corresponding locking pins (ball handles) and the original Harting connector. Technical data & details: Manufacturer: Homag Group / Brandt Part number (engraved): 4-030-15-0531 (4030150531) Components: Knurled glue roller, metering slide for layer thickness adjustment, protective grille, high-temperature-resistant connecting cable with Harting connector, 2x locking pins. Suitable for: Many models of the Brandt Optimat series (KDN / KDF / Ambition, etc. – please check the part number with your machine beforehand).

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Mill fitted with Manganese steel liners for operation will steel ball grinding media. White Metal Bearings on trunnions. 90 kW Motor fitted (could be reduced to 75 kW). Kdedozvgvnspfx Ah Eot Mill with countershaft drive but could be converted to gearbox.

Condition: new, Year of construction: 2026, Holzkraft panel saw with scoring saw Compact panel saw with a pivoting saw blade and a high-quality, anodized aluminum crosscut fence The cutting plane of the compact panel saw is directly on the sliding table Precision-guided aluminum crosscut fence, anodized as standard Large table extension guided on a telescoping arm and adjustable in length Kdsdpfeih Dwvsx Ah Eot The standard table widening and extension allow for easy work with larger workpieces The large-sized saw unit made of gray cast iron is double-mounted on the cast iron table and guarantees stability, precision, smooth running, and a long service life Large work table made of ground gray cast iron, making it extremely robust and durable Smooth operation and precise cuts Aluminum crosscut fence Equipped with a tried and tested ball bearing system Dust and dirt resistant due to minimal contact point between the ball and trapezoidal rail 10-year HOLZKRAFT warranty on wear of the hardened guide rails Telescoping fence Extendable aluminum telescoping fence Angle adjustable With two professional folding fences Ek2a0i2ik Parallel fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table widening Anodized aluminum crosscut fence Parallel fence with round bar guide and fine adjustment Model SC 2 classic Item No. 5504215 Technical data Table dimensions 1020 x 325 mm Table height 900 mm Fence length 1660 mm Cutting height max. 90° with scoring saw 100 mm Cutting height max. 45° with scoring saw 79 mm Rip width max. to the left of the saw blade 1270 mm Cutting width with parallel fence 900 mm Saw blade tilt 90° - 45° Saw blade diameter max. with scoring saw 315 mm Saw blade diameter max. without scoring saw 315 mm Scoring saw blade diameter (optional) 80 mm Main saw blade speed 4000 min-1 Scoring saw blade speed 7600 min-1 Electrical connection 400 V / 50 Hz Motor power 4.0 kW Dust extraction nozzle diameter 120 mm Dust extraction nozzle diameter saw blade guard 60 mm Weight 295 kg Location: In stock at 54634 Bitburg - immediately available -

Condition: new, functionality: fully functional, Year of construction: 2023, - In stock, unit is available! - The Rotection flowpack machine is suitable for packaging various products. A large operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Model designation: Rotection tubular bag machine Operating display: 6.8" display Drives: Servo Packing length: 40-400mm Packaging width: 35-160 mm (depending on film width) Packing height: dependent on form shoulder Ksdpfxoinwi Hs Ah Eodt Speed: 80-100 bags/min. in continuous operation Speed: up to 70 bags/min. Intermittently Film width: 90-400 mm Power consumption: 5 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 400 kg System dimensions: approx. 4000 x 930 x 1370 mm Error rate: < 5% *The above information refers to the model: RMFP70. This is a horizontal packaging machine. In the picture gallery you will find various models from our range of systems. Of course we offer you state of the art Box-Motion tubular bag systems. In order to be able to offer you the right packaging system for your requirements, our engineers are available to advise you. Of course, we will supply you with suitable mounting frames for the use of thermal transfer printers, or we will be happy to offer you a suitable system. We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance.

Condition: used, Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Roller conveyor drive motor: 0.18 kW 88 rpm Kdjdpfx Aetlzgzoh Eet -Drive motor conveyor belt: 0.37 kW 71 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm -Transport dimensions: 1700/1440/H690 mm -Weight: 348 kg

Condition: used, Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRSZP -Drive motor: 0.18 kW 88 rpm -Intermediate dimension: 1480 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm Kjdpfotlzgtox Ah Eedt -Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm -Transport dimensions: 1780/1420/H2180 mm -Weight: 508 kg

Condition: used, Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station Kdsdpfxstlzgwo Ah Eet -Manufacturer: Grenzebach, transfer station roller conveyor type WRSZP -Drive motor: 0.18 kW 88 rpm -Intermediate dimension: 1480 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm -Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm -Number: 2x Transfer station conveyor available -Price per piece -Transport dimensions: 1750/1570/H2020 mm -Weight: 496 kg/pc.

Condition: used, Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with removal conveyor, transfer station Kodpfjtrhmqjx Ah Eedt -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Drive: SEW-Eurodrive 0.18 kW 1380/88 rpm / 0.18 kW 71 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 2x 480 mm -Number: 1x transfer station available -Transport dimensions: 1740/1550/H680 mm -Weight: 410 kg

Condition: as good as new (ex-display), Year of construction: 2012, ⭐ PREMIUM LOW-HOURS BORING MILL — READY FOR IMMEDIATE USE ⭐ Bohrwerk SCHIESS SMT BMT 130 (2012) | Low Hours (~10k) | Heidenhain iTNC 530 | Ball Bar Tested ​Description: ​PREMIUM OFFER: LOW HOURS & VERIFIED GEOMETRY Kdjdspa N Uhspfx Ah Eot ​The Opportunity: You are looking at a Schiess SMT BMT-130 (Year 2012) with a transparent history of light usage. With only ~10,000 Spindle Hours (and 8,900 Program Run Hours), this machine has averaged less than 1 shift per day since new. It is NOT a tired production machine. ​✅ JUST COMPLETED (Ready for Inspection): ​Geometry Verified: Passed the Renishaw Ball Bar Test with excellent results (Proof of precision available). ​Aesthetics: Professional Fresh Paint applied. The machine looks excellent. ​Functionality: Automatic Tool Changer (ATC) fully serviced and tested. ​TECHNICAL DATA (Verified on Screen): ​Control: Heidenhain iTNC 530 ​Spindle Time: approx. 10,090 h ​Program Run: approx. 8,900 h ​Spindle Diameter: 130 mm (ISO 50) ​WHY BUY THIS MACHINE? ​Authentic Condition: The low hours are genuine and verified by the control unit. ​Ready to Work: Geometry checked, ATC working, looking great. ​Price: At €230,000, it offers the best Price/Performance ratio on the market for a 2012 machine. ​VIDEO PROOF by request Technical data: Spindle diameter - 130mm Spindle Type - ISO 7:24 No50 Spindle Speed - 3000 RPM W axis - 800mm Y axis - 2000mm Z axis - 1600mm X axis - 4000mm Table size - 1800x2200mm Table loading capacity - 12.000kg General dimensions - 6800x6300x4600mm Machine Weight - 35000kg

Condition: used, Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Roller conveyor drive motor: 0.18 kW 88 rpm -Drive motor conveyor belt: 0.37 kW 71 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm Rollers: rubberized Kedpfx Ahotlzg Eo Ejdt -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm -Transport dimensions: 1700/1500/H700 mm -Weight: 397 kg

Year of construction: 2009, condition: good (used), Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -stable design -electrically powered -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm Kjdpfx Aob A Hdksh Ejdt -Conveyor belt transfer: 1400 mm -pneumatic lifting -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Adjustable delivery height: 950 mm -driven: via timing belt -Dimensions: 1450/1650/H1000 mm -Weight: 420 kg

Year of construction: 2009, condition: good (used), Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -stable design -electrically powered -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm -pneumatic lifting -Roller diameter: 105 mm Ksdjb A Himepfx Ah Eedt -Rollers: rubberized -Shaft diameter: 25 mm -Adjustable delivery height: 950 mm -driven: via timing belt -Dimensions: 1450/1650/H1000 mm -Weight: 420 kg

Year of construction: 2009, condition: good (used), Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -Design: stable -Drive: electric -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm Kjdpsb H Ak Ijfx Ah Eodt -pneumatic lifting -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Delivery height: 2150 mm, adjustable -driven: via timing belt -Dimensions: 1600/1750/H2150 mm -Weight: 500 kg

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Kdedpfxow Uc T Ij Ah Eet Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball linear guide size 20 Payload: 60 kg Maximum speed, ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current draw: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit mounted on welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear units 59702 + 59700