Used Ariston Lathe for sale (5,500)

Condition: new, Year of construction: 2025, 0583 mm 1710 mm 82 mm 436 mm 3000 U/min A1-8 DIN 55026 Bodpfswp Tqnsx Acyeww 100 mm 235 mm

Condition: ready for operation (used), Year of construction: 1995, turning diameter over bed 400 mm turning diameter over slide rest 210 mm turning length 1060 mm centre height 200 mm spindle bore 58 mm spindle taper: Camlock D 1-6 Drive 3,2/4,9 kW spindle turning speed range 16, von 55 bis 1600 U/min feeds - longitudinal 0,039-0,541 mm/U feeds cross 0,019-0,271 mm/min. weight of the machine ca. 1,45 t Bedpfx Asxtfx Ascysww dimensions of the machine ca. 1900 x 870 x 1700 mm High-quality machine with induction-hardened guideways, torsionally rigid bed, main spindle made of chrome-nickel steel, surface-hardened and ground gears, automatic circulating lubrication in the spindle housing, slip clutch in the support, bed lubrication via hand pump, Siemens electrical system. Thread feeds for metric, inch, module, and diametral pitch. The machine was only used in a prototype workshop for sporadic applications. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2014, control Haas weight of the machine ca. 6487 kg Bedpfx Aexuv Specyjww

Condition: used, Year of construction: 1981, faceplate diameter 3200 mm swing diameter 5100 mm turning height 2505 mm cross rail - adjustment 1500 mm max. ram stroke 1250 mm slide adjustment 2000 mm control Siemens 8 T tool changer 16 STK table load 60 t faceplate turning speed range -stepless- 0,8-100 U/min feed 0,0 mm/min rapid traverse 6000 mm/min drive of main spindle 75 kW weight of the machine ca. 70 t dimensions of the machine ca. 9,3 x 6,1 x 6,0 m Bjdpfx Aju Sbdgecyeww machine is in an excellent condition!! with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.

Year of construction: 2003, condition: ready for operation (used), Travel X/Z: 210mm/610mm, Travel Y: +/-40mm, Swing over cross slide: 360mm, Spindle bore: 65mm, Tool stations: 12, Tool holder: VDI30, Speed: 4000rpm, Rapid traverse: 24m/min, Feed force: 5000Nm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/2500mm, Weight: approx. 6000kg, Control: Siemens Sinumerik 810D, Operating hours: 4894h. Including oil cooler, parts catcher, power chuck Kitagawa BB08, collet device, turning tool holders and boring bar holders. Documentation available. An on-site inspection is possible. Bwsdpfx Acsxuvn Doyew

Condition: good (used), Year of construction: 2007, turning length: 600 mm, spindle bore: 33 mm, Distance between main spil and left turret 404 mm Distance between spil and sub spil nose minimum 260 mm Distance between spil and sub spil nose maximum 760 mm Max. turning Ø: 180mm Bsdpfxjxtb Nws Acyeww X-Axis: 160mm Z-Axis: 210/600mm Spindle bore: 33mm Speedrange: 4000Rpm Spindle power: 7.5kW Subspindle speeds:4000Rpm Subspindle bore: 7.5mm Length: 3100mm Width: 1700mm Height: 1800mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2000, functionality: fully functional, OKUMA LU 15M-1000 MM WITH BARFEEDER Bwsdpfx Aexur Nwscyow Maximum Turning Diameter: approx. 360 mm Maximum Turning Length (Z-axis travel): approx. 1000 mm Spindle Speed: up to 4,500 rpm X-axis Travel: approx. 260 mm (≈ 10.24″) Z-axis Travel: approx. 640 mm (≈ 25.2″) Power Requirement: approx. 30 kW Machine Weight: approx. 4.8 tons Turrets: Dual turrets (example: upper turret 12 positions, lower turret 8 positions) Live Tooling (M-function): Yes, on the M version

Condition: ready for operation (used), Year of construction: 1992, Available immediately ex-location: New L & Z Lathe Weisser Model Junior Year of manufacture: 1992 Operating hours: 0 Swing over bed: 475 mm Swing over cross slide: 290 mm Swing in gap: 655 mm Spindle bore: 61 mm Spindle speeds: 14 – 2000 rpm Longitudinal feeds: 0.05 – 0.736 mm/min Tailstock MK 4 Quill stroke: 200 mm Drive power: 7.5 kW Weight: 2 t Bwedpfjxurw Ijx Acyew Chuck Multifix with multiple tool holders Price: EUR 15,500 plus VAT, ex-location

Condition: used, Year of construction: 1999, turning length 600 mm Bwjdpfx Acexuv Sioyjw control Fanuc OT

Condition: good (used), Year of construction: 2006, Weiler E 120 cycle lathe, year of manufacture 2006, Siemens 840 D control, turning length 2000 mm, centre height 600 mm, max. workpiece weight 6,000 kg, 165 mm spindle bore, tool cross-section 40 x 40 mm, tailstock MK 6, quill diameter 140 mm, max. quill stroke 300 mm, chip conveyor, Schunk quick-change chuck Rota S Plus Ø 750 mm. Bjdpsxurt Njfx Acyjww

Condition: like new (used), Year of construction: 2007, turning diameter over cross slide: 350 mm, spindle bore: 102 mm, turning diameter: 540 mm, turning length: 1,500 mm, A very nice OMG Zanoletti lathe with few operating hours. Bwedpfxsxuq Nco Acyjw Equipped with a Röhm Enduro 315 chuck with various jaws, a precision Parat quick-change toolpost with 7 holders, a 2-axis Heidenhain digital readout, cooling system, lighting, 6 leveling feet, and instruction manual.

Condition: used, functionality: not functional, incl. some tool holders incl. live driven tool holder Full C-Axis 360.000 Chip conveyor Bwjdpfxoxtbqne Acyjw Problem on Turret Revolver live tools Max. turning Ø: 430mm X-Axis: 230mm Z-Axis: 495mm Spindle bore: 50.8mm Speedrange: 5000Rpm Spindle power: 7.5kW ATC / revolver: 12 Speed live tools:5000Rpm Length: 3400mm Width: 1900mm Height: 2700mm Weight: 3000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle speed (max.): 128 rpm, spindle speed (min.): 2 rpm, turning diameter: 2,000 mm, turning height: 750 mm, VERTICAL LATHE PENSOTTI Mod. BK 20 CNC Control ECS 1802 Table diameter: 2,000 mm Vertical travel of turret slide (vertical carriage): 750 mm Vertical travel of octagonal bar slide: 1,200 mm Table rotation speed: 2.5 – 128 min-1 Tool changer: 8 positions Weight: 30,000 kg USED MACHINE Bodpfx Aoxuq Hbscyoww REFURBISHED IN 2015

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Machine type: CNC lathe Manufacturer: Okuma Type: LU15-M Year of manufacture: 2000 Control: OSP-U100L Country of origin: Japan Delivery time: from stock Long turning length - 1000 mm Towable tailstock - automatic G152 Partial hollow clamping device The lathe is in very good condition. The basic and additional equipment enables this used machine to process long turning lengths of up to 1000 mm. Effective production is also possible thanks to the towable tailstock - automatic, the tool breakage / wear control, the partial hollow clamping device, the K pump and the dialog programming (IGF). An optimal machine for economical and reliable production. The machine is user-friendly and can be integrated into production immediately. Machine equipment Spindle motor VAC built 22/15 kW Long turning length – 1000 mm Towable tailstock – automatic G152 3-jaw chuck Forkardt, diameter 250 mm Steady preparation B-turret Bedpfx Asv Id Ezjcyeww Partial hollow clamping device Dialog-IGF K-pump Tool breakage/wear control Chip conveyor Technical data Max. turning diameter: 340 mm Max. turning length: 1000 mm Travel X-axis: upper 260 mm (170+90); lower 140 mm (90+50) Travel Z-axis: upper 1,040 mm; lower 1.015 mm C-axis travel: 360° Spindle – number of travel steps: 2 – automatic Bore diameter: 62 mm A-turret (upper): 12 tools, all M-tool compatible, VDI 40 B-turret (lower): 8 tools, VDI 40 Rotating tool speed: 45~4500 min -1 Rapid feed: m/min X:15, Z:20, C:200 min -1 Tailstock quill diameter: 90 mm Tailstock quill stroke: approx. 100-120 mm Machine dimensions without accessories LxW: approx. 4800 x 2200 mm Machine height: approx. 2030 mm Weight: approx. 6900 kg Optional Transport organization and implementation Machine delivery and installation Machine commissioning and production-ready handover

Condition: used, Year of construction: 2011, turning diameter 200 mm control DMG Bodpfxoxuv Scj Acyeww weight of the machine ca. 5200 kg

Condition: used, Year of construction: 2001, functionality: fully functional, AVIA TURN 40 for sale. Year of manufacture: 2001 Bwedpfx Ajxr U Uqscysw No warranty! Self-collection from location in Bochum Free loading onto truck (ex works)!

Condition: good (used), Originating from a school. Nice and complete with accessories. Details: Turning diameter: 300 mm Turning length: 430 mm Swing diameter over bed slide: 160 mm Turning diameter over bed slide (with T-slots): 135 mm Centre distance: 470 mm Centre height: 145 mm Bed width: 205 mm Number of spindle speeds: 18 Speed range: 30 - 3550 rpm Speed range: 15 - 3550 rpm Number of feeds: 90 Feed range: 0.02 - 2.0 mm/rev Workpiece weight in steadies (max.): 25 kg Workpiece weight without steadies (max.): 80 kg Machine weight approx.: 0.9 t Total power requirement: 3.5 kW Machine dimensions approx.: 1475 x 795 x 1300 mm Quill diameter: 40 mm Bsdpfx Aew Ryhnjcyjww Quill stroke: 85 mm Control unit: Conventional

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power Bwodpfx Acsxtbf Eeysw 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, workpiece weight (max.): 125,000 kg, chuck outer diameter: 6,300 mm, turning diameter: 6,300 mm, total length: 14,200 mm, total height: 8,315 mm, turning height: 4,000 mm, overall weight: 223,000 kg, power: 161 kW (218.90 HP), Equipment: rotational speed infinitely variable, ECS Numerical Control Table diameter: 6,300 mm Maximum workpiece diameter: 6,300 mm Maximum workpiece height: 4,000 mm Distance from table to lower edge of crossrail: 3,690 – 690 mm Maximum permissible weight: 125,000 kg Maximum vertical travel of crossrail: 3,000 mm Maximum horizontal travel of tool holder head: 3,575 mm Maximum vertical travel of tool holder head: 2,000 mm Bwjdpfx Ajxuqyuecyew Tool holder head inclination angles: –15° / +30° Horizontal travel of tool holder head from table center: 3,425 mm Horizontal travel of tool holder head beyond table center: 150 mm Rapid traverse speed (horizontal and vertical): 2,400 mm/min Crossrail traverse speed: 300 mm/min Table speed: continuously variable Installed power: 220 HP (161 kW) Machine weight: 223,000 kg Floor dimensions: 8,213 x 14,200 mm Height from floor: 8,315 mm Total height: 9,765 mm Complete with: - Copying device - Taper turning attachment - Set of gears for taper turning - Set of gears for threading USED MACHINE

Condition: used, For sale is a fully functional CNC turning machine. Video: available on request via WhatsApp Details & equipment: Bsdpfx Acjw D T Txoyoww The machine can be inspected Year of manufacture: 2000 Fusion 640 control system Chip conveyor will also be included in the delivery at a later stage Machine documentation available If interested or if you have any questions, please contact us.

Condition: used, Year of construction: 2007, turning diameter 246 mm turning length 445 mm Bsdpfoxuv R Sex Acysww control Fanuc 32 weight of the machine ca. 4250 kg

Condition: used, Year of construction: 2017, functionality: fully functional, turning length: 3,000 mm, turning diameter: 805 mm, Used CNC cycle lathe with C-axis, featuring the following specifications: Distance between centers: 3,000 mm Center height: 400 mm Swing diameter over bed: 805 mm Swing diameter over carriage: 720 mm Swing diameter over cross slide: 515 mm Cross travel: 400 mm Carriage length: 900 mm Cross slide length: 750 mm Bed width: 425 mm Spindle bore: 105 mm Spindle nose: A2-8/8 Spindle taper: MT 5 Speed range: 1st range: 0 – 425 rpm 2nd range: 425 – 1,700 rpm Feed rate: 0 – 7,000 mm/min Rapid traverse Z-axis: 10,000 mm/min Rapid traverse X-axis: 10,000 mm/min Ball screw Ø Z-axis: 50/10 mm Ball screw Ø X-axis: 32/5 mm Tailstock quill Ø: 106 mm Tailstock quill stroke: 215 mm Tailstock taper: MT 6 Number of tool stations: 12 Tool shank: 32 mm Boring bar: 50 mm Positioning accuracy: 0.01 mm Repeatability: 0.01 mm Motor power: 17 kW Pump motor: 0.57 kW Flow rate: 50 l/min Coolant tank capacity: 225 l Machine dimensions (LxWxH): 5557 x 2077 x 2227 mm Machine weight approx.: 6,460 kg Standard equipment: • CNC control, Fagor brand, model 8055 • Z/X-axis servomotors • Electronic handwheel for X and Z-axis • Servo spindle motor • Coolant system Bsdpfxoxr U H He Acyjww • Spindle sleeve and fixed centre MT 6 • Partial enclosure • Automatic shifting gearbox by Baruffaldi • Automatic lubrication system • Manual tailstock • Work light • Leveling bolts and nuts • Operating and programming manuals in German • CE version including CE Declaration of Conformity • For connection 400V, 50Hz, 3-phase Special equipment: • “C-axis”, continuous positioning • 1 piece 12-station disc turret, Baruffaldi brand, model TBHMA200-12, for live tools with VDI 40 mount • 2 pcs radial tool holders for live tools, VDI 40, type PRR-S-40-ER32/50-T • 1 pc axial tool holder for live tools, BMT65-A-ER32/50-T • 1 pc hydraulic chuck, Ø 400 mm, hydraulic cylinder Ø 92 mm, and hydraulic tailstock quill • Renishaw tool measurement system on the machine • 1 pc chip conveyor • 1 pc fixed steady rest for Ø 10–300 mm • 1 pc fixed steady rest for Ø 300–530 mm • 1 set soft jaws for Ø 400 mm chuck • 1 set hard jaws for Ø 400 mm chuck By the way, besides competitively priced new machines and inspected used machines, you can also expect more from us: • On-site consultation and solution finding • Organization of transport to your facility • Installation, commissioning, and handing over ready for operation • Spare parts supply • Control training for Siemens, Heidenhain, and Fanuc • Trained service personnel also in your area, etc. • 24/7 telephone availability • Tax-optimized trade-in of your old machine • Favorable financing, even without down payment Enquire now! Image shows machine as a new version with 2000 mm center distance.

Condition: like new (used), Year of construction: 2022, operating hours: 12 h, functionality: fully functional, machine/vehicle number: A320A/3798, Machine is purposed for orthopedic implant. Equipped with thread whirling tooling, enable very fast orthopedic / compression locking implant screw manufacturing. Bwsdpfxew Il Nls Acyow Condition is very prime, bought but never used for real production (only for research and development purposes), with around 12 hour TOTAL run-time only. Please note that the machine is NON - CE MARKED.

Year of construction: 1996, condition: used, functionality: fully functional, The reduction machine is a copy milling machine that is used to make tools by copying the representation from the prepared plastic model. It consists of three parts, the electrical cabinet, Bwodpfx Aov Uk Trocyew the basic part of the machine and the auxiliary part of the machine. The reduction machine is a copy milling machine that is used to make tools by copying Dimensions (LxWxH): 1800x1500x700 mm 850 kg Year of manufacture: 1996 good condition

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 1,630 mm, turning diameter: 500 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 430 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 1,474 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 23,000 mm, total length: 54,050 mm, total width: 28,880 mm, Equipment: documentation/manual, Okuma MacTurn 30 - 1500 OSP U100L CNC-Controller Number of axis - 5 +2 Swing over bed - Ø500mm Swing over carriage - Ø500mm Max dia. turning - Ø500 mm Max turning length - 1474 mm X axis Upper travel - 430 mm Bedpjrdvhhofx Acyoww X axis Lower travel - 140 mm Z axis Upper travel - 1474 mm Z axis Lower travel - 1305 mm Y axis travel - 190 mm (+95/-95mm) W axis travel - 1305 mm C axis 360° (0.001 increment) Rapid travers Upper X-axis 20,000 mm/min Lower X-axis 15,000 mm/min Upper Z-axis 25,000 mm/min Lower Z-axis 20,000 mm/min Y -axis 12,000 mm/min C-axis 200 rpm Spindle nose - JIS A2-6 Main spindle speed - 45-4500 rpm Sub spindle speed - 45-4500 rpm Main spindle power - 15 kW Sub spindle power - 15 kW Main spindle diameter - Ø100 mm Sub spindle diameter - Ø100 mm Main spindle boring - Ø62 mm Sub spindle boring - Ø62 mm Rotary tool spindle - 6000rpm Rotary tool spindle - 6,8kW ATC Magazine - BT40 Tool storage capacity - 40 tool Max tool dia. - Ø110 mm Max. tool lenght 300 mm Max. tool mass - 10 kg Chip conveyor type high Wight - 12100kg