Ammann avp 4920 buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
Width 70 cm / Hatz diesel engine / reversible / with vibration / 2 water tanks / hardly run / 700 kg Kroe9 more
6
Hours of operation: 5673 Weight: 8600 kg -Double drive -Double vibration -ROPS -CE 8zqbnp Double drive -Double vibration -ROPS -CE -For questions about emissions standards, please contact us / / If you have questions for exhaust regulations please ask US more photos and quotes on / / more pictures and offers at: more
6
Vibrating roller Ammann, Type V 32-2, Year of manufacture 2007, Hours of use 957 according to the meter read, Drive via Yanmar Diesel engine with 23,2 KW / 32 HP, wheelbase 1600 mm, roller width 1200 mm, roller diameter 10 mm, overall dimensions in length x width x height 2400 x 1250 x 2620 mm, Weight 3100 kg, axle load front 1550 kg, rear axle load 1550 kg, roll-over strap foldable, 9qshxztwm more pictures and more pictures on request, this description is not a binding offer and may contain mi... more
4
-40 m working width -8.000 l capacity 9oex3rv8l -Was used for roadway de-icing at the airport -Dismantling as sprayer parts are available more
5

Machine Ammann AR 65

Amsterdam Netherlands
6212 km
2007
USED
1.100 €
Offernot incl. VAT
Another 6 days
manuele wals, 6,1 kW, motor Hatz Diesel 1B40T -X, 1 cilinder, dubbele trommel, sleutel OK 9mznze9ra more
5

Ammann Roller compressor Ammann

Mont-Saint-Guibert Belgium
6268 km
1938
USED
Starting bid
Another 27 days
Roller compressor Brand: Ammann Year: +/- 1938 Unknown Hours Dimensions of a roll: Length: 1.32 m Diameter: 1.2 m Overall dimensions: 4.3 mx 1.2 mx 2.9 m Condition: Will not start, repair, restore Jupe3m more
6
Kammann Offset Printer for printing of optical media such as CD and DVD. Year 2008 Number of Offset Stations : 4 Number of Silk Screen Stations : 2 including: automatic ink control Ident Control Print Check Uxubg Disc Quicktest Water cooler Speed approx. 135 cycles / Minute Excellent condition, still in production more
6
Hours of operation: 123 Weight: 7140 kg -2-frequency -Tyres 90% good 8hjkz2b0f -ROPS -CE -2-frequencies -good tires 90% -ROPS -CE -For questions about emissions standards, please contact us / / If you have questions for exhaust regulations please ask US more photos and quotes on / / more pictures and offers at: more
6
Vibrating plate Ammann AVH 5020 E Engine: Hatz diesel, power: 7,0 kW Incl. mounting plates Incl. handle Hibleb2t Air filter new New fuel filter Year of construction: 2011 Weight: 415 kg Condition: Good and ready to use. Price: € 3.990 plus ges. VAT. from site South Hesse more
3
Ammann AVS 68-4,Baujahr 2006,Gewicht masher approx. 68 kg, 2.2 kW, Honda engine GX 100, very well maintained condition. Pricing stock Maassen road 91 D-46514 Schermbeck (Kreis Wesel) all information without guarantee. Subject to error and sale. G7pwcvp Prices plus VAT / VAT excluded more


ammann avp...
every day

New machines via email!

Be informed!
2

Machine Ammann AR 65

Amsterdam Netherlands
6212 km
2005
USED
1.000 €
Offernot incl. VAT
Another 6 days
manuele wals, 6,4 kW, motor Hatz Diesel 1B40T -X, 1 cilinder, dubbele trommel, sleutel OK 9mznptz39 more
6

asphalt batching plant Ammann Euro Mea 160

Finowfurt bei Berlin Germany
6735 km
2014
USED
AMMANN EURO MEA 160 ASPHALT PLANT year: 2014 new overhauled capacity: 160 to./h. - 8 cold feeders each 8 m³ - all conveyor belts from cold feeders to drying drum - drying drum Ammann L=10 m ; D=2,5 m / new in 2006 - burner Ammann-Oertli 20.0 MW new in 2014 Cw9wbq9sq - hot elevator - double filler elevator - screening deck with 6 fractions - hot mineral silo with 7 chambers + Bypass - scales system for aggregates, filler, asphalt and additional powder - Ammann mixer 3,0 to. per batch - ready ... more
6

Jaw crushing plant Ammann 6FT

Oberleichtersbach Germany
6620 km
USED
Cd2z3pulmSingle toggle jaw-crusher, opening: 600 x 400 mm, feeding-hopper, apron-feeder, singledeck-prescreen with punchplate, 2 x discharge conveyors, semimobile on steel-skid-frame with wheel-axle, weight: approx. 25 t compatible wheelmobile 100 kVa generator also available more
1
Control Panel / MF Bar 4022 225 4920 in Exchange we are a company that has experience with machine tools for years. Specializing in Deckel Maho. If necessary, we can assist you in troubleshooting and repair other electronic components and mechanical parts or deliver in Exchange, if available in stock. Under exclusion of any warranty and guarantee Bldrct2c8 An error was made when the setting information we reserve the right more
6
Ammann vibratory plate AVH 100-20, built in 2003, electric start, reversible (forward backward), 3-waves compressor, Farymann diesel engine 11 kW, operating weight 705 kg, very good condition! Location of the machine bearing D-46514 Schermbeck. 2espsqmw0 Pricing stock Maassen road 91 D-46514 Schermbeck (Kreis Wesel) all information without guarantee. Subject to error and sale. Prices plus VAT / VAT excluded more
5

Ammann BlackMove 200 Ammann BlackMove 200

Finowfurt bei Berlin Germany
6735 km
2007
USED
AMMANN mobile asphalt batching plant BlackMove 200 MW technical details year: 2007 capacity: 200 to./h. model: BlackMove 200 01.01 2 units Trailer 1 „aggregate hoppers“ 5 aggregate hoppers each 7,5 m³ incl. conveyor belts 01.02 Trailer 2 „drying drum“ Drying drum Typ T 2280 D diameter: 2200 mm length: 8000 mm conveyor belt, reversible 3ux93mcd burner AMB with mit ventilator fuel: light oil burner power, max.: 13,9 MW pump for light oil ; 3 bar / 1700 l/h 01.03 Trailer 3 „dust col... more
6
Ammann tandem roller AV 95-2, built in 2010, approximately 1650 hours, split smooth coat bandages, 3 Steering modes, Kantenandrück / cutter, grit spreader, well-kept condition. Location of the machine bearing D-49090 Osnabrück. Pricing stock D-49090 Osnabrück L7k9l All information without guarantee. Subject to error and sale. Prices plus VAT / VAT excluded more
6
Ammann tandem roller AV 95-2, built in 2008, approx 3030 operating hours, split smooth coat bandages, 3 Steering modes, Kantenandrück / cutter, grit spreader, well-kept condition. Ms7oyo Location of the machine bearing D-46514 Schermbeck. Pricing stock Maassen road 91 D-46514 Schermbeck (Kreis Wesel) all information without guarantee. Subject to error and sale. Prices plus VAT / VAT excluded more
4

Wire & sheet metal roller Buehler HDW 120

Bruchsal-Büchenau Germany
6594 km
1980
USED
MOTOR wire & sheet metal roller Buhler HDW 120 - 03-99-001 Shipping time: immediately Number: 03-99-001 Manufacturer: Bühler Type: HDW 120 MACHINE DATA Year built: approx 1980 L x W x h: approx. 500 x 700 x 1400 mm Weight: 300 kg Good general condition 9qu0tapxc TECHNICAL DATA SUITABLE FOR THE PLATIEREN OF LIGHT METALS Reels - width: approx. 120 mm Rollers - diameter: approx. Ø 60 mm Wire diameter: approx. 0-8 mm Material thickness: approx. 0-8 mm Accessori... more
5
Producer: Blotenberg Type: FA-500/U YOM: 11/2000 used Fabrication-Nr.: 4920 Motor Power: 0,55 kW Voltage: 230 V Conveying Capacity: 500 l/h Space Requirements of the Machine (LxWxH): ca. 400 x 970 x 980 mm Weight: ca. 90 kg Caaw2qk0 Additional information: • Suited for: Emulsions, Coolant, Cleaning Solution, wet-machining machine tools, Wash Systems for Parts • Filtration up to: 5µm more
4
lifting capacity in kg: 1000 kg arm length: ca. 3000 mm total column height: - mm cantilever arm length from center column: 3 800 mm height lower edge cantilever arm: 3900 mm lifting height max. hook position: ca. 3 200 mm swival range +/-: ca. 320° Grad column diameter: 400 mm Mt3cv total power requirement: 1,5 kW weight of the machine ca.: 1000 kg dimensions L x W x H: 4200 x 1000 x 4920 mm consists of Pillar, Beam, Hoist ,Travel Trolly and crane chasis crane chasis: manual via chain travel h... more
6

Complete dosing system KARRY GmbH

Weißenburg Germany
6758 km
2000
USED
Dissolution of a waterworks The sale is carried out on behalf of a municipal authority Complete dosing system was used to dose iron II sulfate includes: R + I Schematic, round container with collecting basin Overfill protection (float) Factory: E.L.B Type: T200, Level control unit Model E.L: B Type ER 104 Static mixer factory ACV, MID Make Krohne Type: IFM 5080K Metering pump Manufacturer LEWA Type: EK-M-210V1 Fine Filter Cake Maker Type: AVPP5E Pressure Holding Valve Manufacturer: Alldos Type: ... more
3

L + Z lathe Matra - Hermes TP 200 R

Bruchsal-Büchenau Germany
6594 km
1985
USED
L + Z LATHE MATRA - HERMES TP 200 R - 04-03-202 Shipping time: immediately Number: 04-03 202 Manufacturer: MATRA - Hermes Type: TP 200 R MACHINE DATA Year of construction: approx. 1985 L x W x H: approx. 2700 x 1400 x 1600 mm Weight: 1800 kg Good general condition Td0xuw09 TECHNICAL DATA Digital display: Optional 2 or 3 - axle new Dimensions: Maximum turning diameter over bed: dia. 340 mm Maximum turning diameter over support: approx. Ø 200 mm Maximum turning diamet... more
1

Measuring plate Messplatte 1500 x 3000

Bruchsal-Büchenau Germany
6594 km
1990
USED
MEASURING PLATE 1500 X 3000 - 11-99-009 Shipping time: immediately Number: 11-99-009 Manufacturer: measuring plate Type: 1500 x 3000 MACHINE DATA Year of construction: approx. 1990 L x W x h: approx. 3000 x 1500 x 1000 mm Weight: approx. 3000 kg 2qv783 Good general condition TECHNICAL DATA MEASURING PLATE Length: 3000 mm Width: 1500 mm Strength: approx. 300 mm Accessories • Storage feet Other accessories on request Price and other specifications on request more
2

Measuring plate Hommel Dura 1500 x 3000

Bruchsal-Büchenau Germany
6594 km
1990
USED
MEASURING PLATE HOMMEL DURA 1500 X 3000 - 11-99-008 Shipping time: immediately Number: 11-99-008 Manufacturer: Hommel Dura Type: 1500 x 3000 MACHINE DATA Year of construction: approx. 1990 L x W x h: approx. 3000 x 1500 x 1000 mm Weight: approx. 3000 kg Good general condition TECHNICAL DATA MEASURING PLATE Length: 3000 mm Width: 1500 mm Yrkfws Strength: approx. 250 mm Accessories • Storage feet Other accessories on request Price and other specifications on requ... more
2

Measuring plate Hommel Dura 1000 x 2000

Bruchsal-Büchenau Germany
6594 km
1990
USED
MEASURING PLATE HOMMEL DURA 1000 X 2000 - 11-99-007 Shipping time: immediately Number: 11-99-007 Manufacturer: Hommel Dura Type: 1000 x 2000 MACHINE DATA Year of construction: approx. 1990 L x W x h: approx. 2000 x 1000 x 1000 mm Weight: approx. 2000 kg Givrccj Good general condition TECHNICAL DATA MEASURING PLATE Length: approx. 2000 mm Width: 1000 mm Strength: approx. 165 mm Accessories • Storage feet Other accessories on request Price and other specification... more
4

Boom drill Alzmetall AB 30 R - 1000

Bruchsal-Büchenau Germany
6594 km
1980
USED
BOOM DRILL ALZMETALL AB 30 R - 1000 - 02-06-010 Shipping time: immediately Number: 02-06-010 Manufacturer: Alzmetall 9qur8omsf Type: from 30 R - 1000 MACHINE DATA Year built: approx 1980 L x W x H: CA. 1800 x 800 x 2000 mm Weight: 1500 kg Very good condition TECHNICAL DATA Maximum drilling diameter in steel: approx. Ø 32 mm Maximum drilling diameter in cast: approx. Ø 40 mm Chuck: MK 4 Speed range: approx. 63-1400 RPM Throat depth: approx. 1000 mm Column diam... more
4

Vertical - shock machine Behr ST 250

Bruchsal-Büchenau Germany
6594 km
1974
USED
VERTICAL STOssMASCHINE BEHR ST 250 - 18-11-005 Shipping time: immediately Number: 18-11-005 Manufacturer: Behr Type: ST 250 MACHINE DATA Year of construction: approx. 1974 Ehqsoh07e L x W x h: approx. 2500 x 1600 x 2300 mm Weight: approx. 2000 kg Very good condition TECHNICAL DATA Control: manual / conventional Shock length (hub): approx. 250 mm Power: approx. 5.0 kW Round table - diameter: approx. Ø 600 mm Round table - turning range: 360 degrees Stroke ra... more
4
HORIZONTAL - ZAHNRADABWAeLZFRAeSMASCHINE WMW ZFWZ 500 X 5 - 20-13-006 Shipping time: immediately ID: 20-13-006 Manufacturer: WMW Tdf3cnaz Type: ZFWZ 500 x 5 MACHINE DATA Year: circa 1970 L x W x h: approx. 2500 x 1900 x 1900 mm Weight: 1500 kg Good general condition TECHNICAL DATA Maximum workpiece diameter: approx. Ø 500 mm Max wheel width: approx. 180 mm Min. module: approx. 0.5 Max engine: approx. 5 Table hole: MK 5 Cutters - workpiece distance: 10-200 mm ... more
6
HORIZONTAL - ZAHNRADABWAeLZFRAeSMASCHINE WMW ZFWZ 250 X 2.5 - 20-13-005 Shipping time: immediately ID: 20-13-005 Manufacturer: WMW Type: ZFWZ 250 x 2.5 MACHINE DATA Year: circa 1970 L x W x h: approx. 2000 x 1500 x 1700 mm Weight: 950 kg Good general condition TECHNICAL DATA Maximum workpiece diameter: approx. Ø 250 mm Max wheel width: approx. 125 mm 9qudley3u Min. module: approx. 0.5 Max engine: approx. 2.5 Table hole: MK 3 Cutters - workpiece distance: appr... more
3

L + Z lathe Weiler Commodor 230

Bruchsal-Büchenau Germany
6594 km
1991
USED
L + Z LATHE HAMLET CAN 230 - 04-03-201 Shipping time: immediately Number: 04-03-201 Manufacturer: Weiler Type: Can 230 MACHINE DATA Year of construction: approx. 1991 L x W x H: approx. 2700 x 1200 x 1800 mm Weight: approx. 1600 kg Very good condition TECHNICAL DATA Digital display: 2 - axes - digital display HEIDENHAIN VRZ 730 Dimensions: Maximum turning diameter over bed: approx. Ø 475 mm Maximum turning diameter over support: approx. Ø 270 mm Maximum turning lengt... more
2

Tool room milling machine Deckel FP3

Bruchsal-Büchenau Germany
6594 km
1978
USED
WERKZEUGFRAeSMASCHINE cover FP 3 - 07-07-219 Shipping time: immediately Number: 07-07-219 Manufacturer: Lid Type: FP 3 Gvds3c MACHINE DATA Year of constr.: 1978 approx. L x W x h: approx. 2000 x 1600 x 1900 mm Weight: 1500 kg Good general condition TECHNICAL DATA Digital display: 3 - axes - digital display HEIDENHAIN VRZ 752 B Procedures: X - axis: 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm Table clamping surface (Tilt/Swivel table): 660 x 375 mm S... more
6
HORIZONTAL - ZAHNRADABWAeLZFRAeSMASCHINE PFAUTER RS 1 V - 20-13-004 Shipping time: immediately ID: 20-13-004 2quqya Manufacturer: Pfauter Type: RS 1 V MACHINE DATA Year built: approx 1980 L x W x h: approx. 2500 x 2000 x 2000 mm Weight: approx. 4000 kg Good general condition TECHNICAL DATA Maximum workpiece diameter: approx. Ø 750 mm Max wheel width: 300 mm Min. module: approx. 0.5 Max engine: about 8 Table hole: approx. Ø 100 mm Table - diameter: approx. Ø 5... more

Ends processing machine Schlatter ZH 1 - A

Bruchsal-Büchenau Germany
6594 km
1978
USED
CUT-OFF MACHINE EQUIPPED SCHLATTER ZH 1 - A - 22-02-009 Shipping time: immediately Number: 22-02-009 Manufacturer: Schlatter Type: ZH 1 - A MACHINE DATA Boeqkihk Year of constr.: 1978 approx. L x W x h: approx. 3000 x 1800 x 1200 mm Weight: approx. 2000 kg Good general condition TECHNICAL DATA Control: conventional Diameter - area: approx. Ø 9-180 mm Unilateral editing: Workpiece length: Led (centrically exciting): approx. 2000 mm Supported: endless Centerin... more
3

Fixed - angle table Maho Typ MH

Bruchsal-Büchenau Germany
6594 km
1990
USED
SOLID ANGLE TABLE MAHO MH - 27-04-007 Shipping time: immediately Number: 27-04-007 Manufacturer: Maho Type: MH MACHINE DATA Year of construction: approx. 1990 Rxrbt7q L x W x H: CA. 900 x 600 x 500 mm Weight: 300 kg Very good condition suitable e.g. for: Maho MH 800 & MH 1000 TECHNICAL DATA Table size: 900 x 550 mm T - grooves (clamping surface): Number: 6 pieces Size 18 mm Distance T - grooves (mounting surface): approx. 3 x 90 mm Other accessories on request... more
3

Fixed - angle table Deckel Typ FP 4 M

Bruchsal-Büchenau Germany
6594 km
1990
USED
SOLID ANGLE TABLE COVER FP 4 M - 27-04-006 Shipping time: immediately Number: 27-04-006 Manufacturer: Lid Type: FP M & MK 4 MACHINE DATA Year of construction: approx. 1990 L x W x h: approx. 800 x 500 x 500 mm Weight: approx. 220 kg Very good condition suitable e.g. for: Cap FP 4 M & FP 4 MK Cgm0xdw7i TECHNICAL DATA Table size: 800 x 460 mm T - grooves (clamping surface): Number: 7 pieces Size 14 mm Distance T - grooves (mounting surface): approx. 60 & 126 mm ... more
3

Fixed - angle table Mikron Typ UWF

Bruchsal-Büchenau Germany
6594 km
1990
USED
SOLID ANGLE TABLE MICRON UWF - 27-04-005 Shipping time: immediately Number: 27-04-005 Manufacturer: Micron Type: UWF MACHINE DATA Year of construction: approx. 1990 L x W x h: approx. 840 x 500 x 500 mm Weight: 200 kg Very good condition suitable e.g. for: Micron UWF 801 & 802 UWF Ikhm7bf TECHNICAL DATA Table size: 840 x 440 mm T - grooves (clamping surface): Number: 6 pieces Size 14 mm Hole spacing (mounting surface): approx. 2 x 120 mm Other accessories on r... more
1

Round table Walter RtW 400 - MPA

Bruchsal-Büchenau Germany
6594 km
1990
USED
Round table Walter RtW 400 MPA - 27-04-004 Shipping time: immediately Number: 27-04-004 manufacturer: Walter type: RtW 400 MPA product description Machine data Year of construction: approx. 1990 L x W x H: approx. 600 x 600 x 400 mm weight: approx. 300 kg of very good general condition Technical data - part Roundtable Digital display: 1 - axes - digital display HEIDENHAIN rotary encoders: HEIDENHAIN resolution: 0.001 degrees face plates - diameter: approx. 400 mm clamping - T-slots: 4 ... more
5

Flange - table Anflansch - Tisch 600

Bruchsal-Büchenau Germany
6594 km
1990
USED
Flange on - table type 600 - 27-04-002 Shipping time: immediately Number: 27-04-002 manufacturer: table flange on type: 600 product description Machine data Year of construction: approx. 1990 L x W x H: approx. 600 x 600 x 500 mm weight: approx. 120 kg of very good general condition B7wrzgoxq Technical data - flange - table Table clamping surface: approx. 600 x 400 mm Swivel range: via hand crank links: about 90 degrees right: approx. 90 degree clamping - T-slots: 3 piece nut - width:... more
5

Mechanical rotary table Test-Fuchs KDT 1

Bruchsal-Büchenau Germany
6594 km
1980
USED
No. 27-01-1 Manufacturer test - Fuchs 37ric97ta Type KDT 1 Machine data Year built: approx 1980 L x W x h: approx. 600 x 700 x 500 mm Weight: 200 kg Like new condition Technical data Mechanical rotary table Round table ø: approx. Ø 500 mm Part of setting up manually via Handwheel with scale Max rotation range: 360 degrees mechanical table clamp Clamping T - grooves Other accessories on request Price and other specifications on request Subject to errors and i... more
4

Short bar loader KUPA LM 1500

Bruchsal-Büchenau Germany
6594 km
2000
USED
Number 27-03-187 Manufacturer Kupa Type LM 1500 Machine data Year of construction: 2000 L x W x H: approx. 2200 x 900 x 1600 mm Weight: approx. 400 kg Good general condition Technical data B7bk2alk Control: CNC - machine Rod diameter: approx. Ø 4-85 mm Maximum bar length: approx. 650-1700 mm Maximum travel: 1750 mm Rod weight: 125 kg Height adjustment: approx. 860-1200 mm Power supply: 24 volt Loading time: 6 seconds incl. material holders incl. operati... more
1

Short bar loader KUPA LM - 1000

Bruchsal-Büchenau Germany
6594 km
1994
USED
Number 27-03-105 Manufacturer KUPA Ruyvolnj0 Type LM 1000 Machine data Construction year: CA 1994 L x W x H: CA. 1670 x 900 x 1300 mm Weight: 320 kg Technical data Control: On CNC - machine Rod diameter: approx. Ø 4-65 mm Maximum bar length: approx. 650-1200 mm Height: approx. 850-1060 mm Power supply: 24 V / 0.5 A Air supply: 6-8 bar incl. holder incl. user manual & schematics Accessories on request! Price and other specifications on request Input of errors ... more
3

Hinge - band - conveyors Astos CDT / 275

Bruchsal-Büchenau Germany
6594 km
2011
USED
Number 27-02-175 Manufacturer of Astos Type CDT 275 Machine data Year of construction: approx. 2011 L x W x h: approx. 4000 x 800 x 1800 mm Weight: approx. 400 kg Like new condition 3 units available 2 x right side - discharge 229bzmt0t 1 x left side - discharge Technical data suitable for: CNC - machine Dimensions module: Length: 1300 mm Width: 450 mm Height: approx. 280 mm Band width: 300 mm Band length: 2400 mm Discharge height: approx. 1000 mm Chip co... more
2

Hinge - band - conveyors KS 360

Bruchsal-Büchenau Germany
6594 km
1993
USED
Number 27-02-174 Manufacturer KS Type 360 Machine data Year of construction: approx. 1993 L x W x h: approx. 3000 x 1100 x 1200 mm Weight: approx. 500 kg 2sbg2mqqd Very good condition Technical data suitable for: CNC - machine Dimensions module: Length: 1800 mm Width: 490 mm Height: approx. 220 mm Band width: approx. 360 mm Band length: 1600 mm Discharge height: 900 mm Chip conveyor - type: hinge - band - conveyors incl. coolant tank Price and other spec... more
2

Scratch - band - conveyors Knoll K1 / 330

Bruchsal-Büchenau Germany
6594 km
2012
USED
Number 27-01-150 Manufacturer Knoll Type K - 1 Machine data Year of construction: about 2012 L x W x h: approx. 3600 x 700 x 1300 mm Weight: approx. 400 kg Very good condition Technical data suitable for: CNC - machine Dimensions module: Length: 1600 mm Width: 420 mm Height: approx. 160 mm Band width: 330 mm Wwpdfmn3k Band length: 1600 mm Discharge height: approx. 1000 mm Chip conveyor - type: scratch - band - conveyors Price and other specifications on req... more
3
Number 27-02-148 Manufacturer of conveyors Type 240 Machine data Year of built: unknown L x W x h: approx. 3000 x 900 x 1300 mm Weight: approx. 400 kg Technical data suitable for: CNC - machine Dimensions module: Length: approx. 2000 mm Width: 370 mm Height: approx. 220 mm Wh3qqbocx Band width: approx. 240 mm Discharge height: 820 mm Chip conveyor - type: hinge belt - conveyor incl. coolant tank 250 liters incl. coolant pump Other accessories on request Pric... more


ammann avp...
every day

New machines via email!

Be informed!

to

to

Change search
AMMANN AVP 4920
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.