Used 3 Cantilever Arm Racks An And Double Sided for sale (85,897)

Condition: good (used), Handtmann VF628 vacuum filler with PVLS143 high speed linker cutter from 2021 and GS300 auto tray loading system consisting of GM310 and ZB311. Rarely available. We can offer an additional similar setup with VF622 instead of VF628. Hjdpfevvxumex Agtent

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands € 3.875,- (net)! Price for transport within Germany (excluding islands): € 550,- (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 uprights, double-sided, approx. 5.18 m high, hot-dip galvanized Hodpfeddmq Tsx Agtjnt IPE 180/80 each with 2x3 adjustable. Arms 1.20 m, 500 kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 5180mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 2600 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm - NEW -: Hnodpfx Agoddmqyetet Price ex location including loading! 1 shelf unit with 4 stands € 4.185 (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 uprights, double-sided, approx. 5.18 m high, hot-dip galvanized IPE 180/100 each with 2 x 3 adjustable Arms 1.20 m, 860kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 5180mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 860 kg per arm / 2600 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 6.30m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands € 4.115 (net)! Transport costs within Germany (excluding islands): € 490 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights on one side approx. 6,300 mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 4,000 kg per stand with 4 stands per arm level 4 x 500kg = 2,000 kg Profiles: frame: IPE220, arms: IPE 80 Hnsdpfx Aofivg Rsgtst with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 3,210 mm, compressed air connection: 6 bar, cutting length (max.): 6,000 mm, Combi cutting table for cutting monolithic and laminated (VSG) glass. The entire line consists of an automatic crane, tilt table, a table for removing low-e film for both monolithic and VSG glass as well as for cutting monolithic glass, module VB-45 used for cutting VSG glass, and a table for breaking off monolithic glass as well as for removing finished pieces. For sale without crane and tilt table. Hnjdpsx Tq S Dsfx Agtot

Year of construction: 2017, condition: new, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm - NEW - : Price ex-works including loading! 1 racking unit with 4 uprights: €3,210.00 (net)! Transport within Germany (excluding islands): €550.00 (net) A cantilever racking system, hot-dip galvanized, consisting of: 4 racking uprights, double-sided, approximately 3.50m high, hot-dip galvanized Hjdpfx Agjddmtqetjnt IPE 160 / 100 with 2x3 adjustable arms, 1.20 m, 750kg load capacity per arm with cross braces approximately 1.30 m Racking uprights, double-sided, approximately 3500mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable racking arms each Load capacity with load center at 600 mm: 750 kg per arm / 2250kg per upright with longitudinal and diagonal braces e = 1300mm, standard is 1.30m. Other standard lengths available in stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! A small surcharge will apply to the stated price for lengths from 1.50m! Custom dimensions (different center distances) are also available on request, but will incur a surcharge and have a longer delivery time as they need to be manufactured specifically. If you do not specify any different center distance, we will supply the racking with a center distance of 1.30m. In this case, the length of a racking row with 4 uprights (3 bays) is approximately 4m. Delivery with all screws and nuts (shipping within Germany via parcel directly from Würth), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) are selectable! Please contact us!

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 250 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (PUR. Glue + Quick Melt system + EVA Glue) VTG 3-24 + 283.201 + 283.19 + 283.203 Pressure zone Edge coils supporting unit (No. 24 reels) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Profile Scraping unit 08.515 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) Hodpfxsxggthj Agtsnt No. 3 Grooving units 08.190 (2 x Left-hand + 1 x Right-hand) (Kw 4,5 x 3) swivelling 90°/180°/270°

Year of construction: 2021, condition: new, The prices mentioned in this advertisement are valid as of mid-2021. Due to the current international situation, the prices of steel and transportation are increasing almost daily. The availability of steel as a raw material is limited and currently unpredictable. Therefore, we kindly ask you to inquire about the current prices and availability! We will be happy to provide you with an up-to-date offer! Hodpeddmr Njfx Agtjnt Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm - NEW -: Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Price for transport within Germany (excluding islands): €425 (net)! Of course, you can also create longer or shorter rack units by omitting or adding more frames (or by using different bay widths); this example with 4 frames is just the most common rack solution! A cantilever rack system, hot-dip galvanized, consisting of: 4 rack uprights, double-sided, approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 adjustable arms of 1.20 m, 500kg load capacity per arm with cross braces approx. 1.30 m Rack uprights, double-sided, approx. 4160mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable rack arms each Load capacity with load center at 600 mm 500 kg per arm / 2250kg per upright side with longitudinal and diagonal braces e = 1300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! A small surcharge will be added to the stated price for lengths from 1.50m! Special sizes (different bay widths) are also available upon request, but they will also incur an additional cost and have a longer delivery time as they need to be manufactured separately! If you do not specify any deviating bay widths, we will deliver the rack with a bay width of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery with all screws and nuts (shipping within Germany via parcel directly from Würth), without floor anchors.

Condition: used, Double edgebanding machine BIESSE STREAM SB2 10.5 usable as 1st and 2nd machine in a edgebanding line Numerical Control with Sintra Software Machine suitable for 1st + 2nd pass of the panel Opening of the mobile shoulder motorized by C.N. mm 3000 Panel height 60 mm Pvc/Abs mm 3 Hnjdpfxeu Rim Hj Agtjt Continuously variable feed speed from C.N. (up to 40 m/min) Working height electronically adjustable by C.N. (up to 60 mm) Opening of the moving shoulder electronically adjustable by C.N. Motorized rubber belt with higher pressure Track with bearings with hidden pins - distance between PINS mm 500 Automatic system for supporting large panels Anti-adhesive group Part to be squared composed of (for each side): * Automatic timed anti-splinter group * Double shredder group * Two-motor grinding group Border part composed of (for each side): * Gluing unit for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. * 6-position reel magazine with automatic edge change by C.N. * End trimming unit with 2 motors with automatic inclination * Overlapping trimming group with 2 motors * Edge trimming group with 2 tilting motors electronically adjustable by C.N. * Multifunction rounding unit with 4 motors (cornering tool + rounding tool) with numerical control adjustment automatically * Toupie Group (with 2 motors on the fixed left side \ with 1 0-90° tilting motor on the mobile right side) * Electronically controlled edge scraper group by C.N. * Glue scraper group * Oscillating brush group * Phon group

Condition: good (used), Load capacity: 50 kg Working length: 7000 mm Hjdpfoh Ri Svjx Agtsnt

Condition: used, OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) is perfect machine for both tasks: cut-to-length cutting and longotudinal cutting of coil metal into strips with 2000mm coil width, 10mm maximum metal thcikness and 30t coils OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) Composition of the line: 1. Stocking ramp 2. Loading cradle 30t 3. Double cone uncoiler 4. Hydraulic peeler table 5. Arm with roll-press roller-bridge structure 6. Assembly including pinch-roll and pre-straightener 7. crop shear 8. tilting roller conveyor on pit 9. slitting shear shaft diam. 200mm Hedpstvdy Ijfx Agtsnt 10. mobile side guide 11. tensioning rollway 12. side trim rewinder 13. burr crusher 14. recoiler + unloading crandle 30tons. 15. tensioning rollway to leveler 16. unger leveler 17. guillotine flying shear 18. pinch-roll for sheet ejection 19. stacker 20.roller conveyor for stack ejection 12mt. 21 hydraulic control unit 22. electrical equipment 23. tooling

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Adjustable feeding speed (m/min ) 10 - 30 Hnjdpfx Agel Hydmstjt Safety and sound-proof enclosures/cabins SIZING PART (for each side): No. 2 Hogging Units (2 x Kw 5,8 ca.) No. 2 Milling units (2 x Kw 4 ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt glue + Multing Unit) Pressure zone (adjustable by CN) Edge coils supporting unit (No. 6 reels) Rough Trimming unit (2 x Kw 1 ca.) Fine Trimming unit 08.055 (2 x Kw 0,5 ca.) 0°-30° No. 5 Milling grooving units (5 x Kw 4 ca.) Profile Scraping unit Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit + Hot Air Heater (to reactivate the color of plastic tape)

Condition: like new (used), Year of construction: 2022, operating hours: 454 h, load capacity: 1,500 kg, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, Manufacturer + model: ACTIL N 15 S - TTFY Mast: 3F5400 ID: 26064.0363 Category: Demo Mast: 3F5400 Lowered height: 2400 mm Lifting height: 5400 mm Capacity: 1500 kg Year: 2022 Hours: 454 hours Capacity: 24V / 775Ah Options: DEMO!! MINI forklift - Order picker - Counterbalance stacker (3-in-1!!) - Dual controls - Triplex mast - FFL mast - Stainless steel and fork spreader - Tilting fork carriage - Spotlights Hnjdpfszv R Dcsx Agtst - 2 x Blue Spot lights - with cantilevered forks - SUITABLE for all types of pallets - POWER STEERING

Condition: used, machine/vehicle number: 008266, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 25 m/min Hnodpfox A Hfisx Agtjt Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins Hnsdpfxeifnxxj Agtjt SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: excellent (used), Year of construction: 2001, Device description: working width 950 mm calibrating unit with a metal roller combined unit with a rubber roller and a shoe pneumatically adjustable shoe star-delta starter pneumatic oscillation controlled by photocells two feed speeds for the conveyor engine power 11 kW Hnedpszxzg Hsfx Agtjt year of manufacture 2001 power supply 400V weight 975 kg

Condition: excellent (used), Double side - Independent Machine (1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 10 (ca.) / 60 Working width (min/max) mm 260 (ca.) / 3200 Numerical Control MAESTRO PRO EDGE /Software EYE-M Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) with CNC vertical adjustment Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side + Glueing Unit (PUR Glue + Quick Melt system) CNC adjustment of the edge height Band Pressure zone (N.C. adjustment) + Edge coils support (No 6 reels) CNC positioning of the edge Hnedpfx Agozmfg Tjtot Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C. adjustment) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Milling grooving unit U (1 x Kw 5,5) on Left-side Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE

Condition: used, Double squaring edgebander usable in line or off line as first or second machine CNI control on separate electrical cabinet Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3200 Maximum panel width mm 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Bearing track with retractable pin Hnjdpfxjkvrxqj Agtet Distance between the retractable pins mm 500 Squaring part composed of (for each side): Rectifier unit with two motors Edging part made up of (for each side): Gluing unit with premelter for EVA glue Edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit Staggered gleaning unit with two motors Rounding unit with 4 motors 0-90° inclinable spindle moulder unit Edge scraper group Brush group

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Hnedpfswk Hp Tjx Agtjt - Min/max edges (band) thickness in rolls mm 0,3 - 3 - Min/ max panels thickness mm 12 - 40 - Min /max working width mm 250 - 2500 - Numerical Control: Power Control PC 22 - Feeding speed (adjustable) m/min 10 - 32 - Top motorized pressure belt - Anti-sticking liquid spraying unit - Pre-Milling Unit (Vertical joint trimmers) 2 x Kw 4 at 9.000 RpM - Glueing Unit (Hot Melt + Quick Melt system): A3 - Pressure Zone (manual adjustment): "A" - Edge coils supporting unit with N. 2 coils - Snipping Unit: HL 84 (2 x Kw 0,22 at 12.000 RpM) - Fine Trimming Unit (2 x Kw 0,4 at 12.000 RpM) - Finish processing unit (Glue scraper + Buffing unit): FA 11 - Spraying & polishing unit

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total width: 810 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1525,00 € net 1814,75 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Hedjzy U Dnjpfx Agtsnt Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), Catalog number 8107 TECHNICAL DATA - max. width of workpiece 400mm - max. thickness of workpiece (electrically adjustable) 130mm - digital display of material height – top: - pressure rollers (for short workpieces) - twisted feed roller - ejectors - planing roller (spiral) 7.5kW - pressure - smooth, feed metal roller – bottom: - infeed table - planing roller (spiral) 5.5kW - 2 sliding rollers in the bottom table - stepless feed speed adjustment 0-10m/min - electrical height adjustment - lifting motor 0.37kW - feed motor 1.5kW - diameter of dust extraction nozzle 2x130mm - central lubrication - dimensions (L/W/H) 2270x1900x1620mm - weight approx. 2100kg Hnjdpfx Aszzyq Aogtot ADVANTAGES - spiral rollers - heavy cast iron machine, top and bottom rollers, both with their own motors - pressure rollers that hold the workpiece firmly and evenly, ideal for short workpieces - excellent condition – used planer, not repainted Net price: 38900 PLN Net price: 9262 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: good (used), GMP Surelam-Pro 500D Roll Laminator Production-ready, This high-quality machine is manufactured in Korea. Description: The GMP SURELAM laminator is a professional roll laminator with a working width of 500 mm. This laminator is ideal for a small printing company, advertising agency, or office. This device allows us to laminate a variety of materials thanks to independent heating control of the upper and lower rollers. Electronic lamination process control and two operating modes: manual and automatic, make working with this machine easy and enjoyable, and ensures laminations are always of the highest quality. The laminator offers single- or double-sided lamination options. Includes laminating pouch Technical specifications: – Maximum laminating width: 500 mm – Pouch thickness: 25-500 microns – Lamination speed: 700 mm/min Hnodpfx Agszlgb Aotot – Pressure adjustment: manual – Temperature control: digital – Power supply: 230 V – Power: 3000 W

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 3.5m height, 1.20m arms, 500kg per arm - new -: Hodpfx Agsddmtcetjnt Price ex location including loading! 1 shelf unit with 4 stands 2,899.- € (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 80 Frame: IPE 160 Shelf uprights on one side approx. 3500 mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 2250 kg per stand with 4 stands per arm level 4 x 500 kg = 2000 kg with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 3.70m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands € 2.255 (net)! Price for transport within Germany (excluding islands): € 490 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 80 Frame: IPE 180 Shelf stand on one side approx. 3,700mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at a load center of 600 mm 500 kg per arm / 2,700 kg per stand with 4 stands per arm level 4 x 500 kg = 2,000 kg with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Hedpfxof Tv T Nj Agtont Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: used, SCHNELL Straight and cut OPTIBAT 65T/3/14 Length of OPTIBAT: 14 m Feeding unit driven by servomotor: 160 m/min 3 Additional cutting level testing photocells. OPTIBAT is very precise Hnjdpfxsymcdkj Agtst Side gangway with safety rail Kit for outdoor positioning Length of OPTIBAT: 14 m Feeding unit driven by servomotor: 160 m/min Additional cutting level testing photocells: 3 (OPTIBAT is very precise) Side gangway: with safety rail Kit: for outdoor positioning