Mobile loading ramp, mini loading ramp

Mobilní nakládací rampa, nájezdová rampa Saurus 6 tons

Year of construction: 2009, condition: good (used), The Grunwald-HITTPAC AKH-059 is a 3-lane filling and closing machine. A rotary cup filling machine is a type of packaging equipment designed to efficiently fill and seal cups with various products, such as yoghurt, pate, kefir, cream cheese and other similar viscous or semi-liquid substances. These machines are commonly used in the food and dairy industry. The machine operates on a rotary system, which allows multiple cups to be filled and sealed simultaneously. The cups move through different stations, each dedicated to specific tasks like cup dispensing, filling, sealing, and capping. Installed cup dimension: 110 x 80mm (150g) Motor and vacuum pumps are protected and installed in the machine frame, underneath the table top. Dimensions: L: 2300 x W: 1800 x H: 2200mm Bwedpfxsm Ux Tie Aknew Weight: 1500kg Power: 9kW Efficiency: approx. 2750 – 3750 cups/h (depends on the product consistency)

Year of construction: 2013, condition: like new (used), functionality: fully functional, Trepko 222-1K rotary filling machine whit 2x moulds. Previously filling yoghurt products and other dairy products. Bodpfx Aeydplcsknsww Mould No 1. Diameter 185 mm No 2. 90 mm. Year of construction 2013.

Condition: good (used), - Material: AISI 316 stainless steel - Standing on feet - Tanks, above, adapted to the cellar vault Bwjdpfovlkgajx Aknsw Dimensions : - Width: approx. 1150 mm - Depth: approx. 1800 mm - Total height at rear: 2500 mm - Total height at front: 3650 mm (including dome) - Ground clearance: 340 mm Equipment: - Rectangular door 320 x 420 mm - Total drain: flap valve DN 40, Friedrich no 2 - Residual drain: flap valve DN 40, Friedrich no. 2 - Taster - Level indicator - Dome DN 200

Condition: reconditioned (used), functionality: fully functional, power: 42.4 kW (57.65 HP), fuel type: diesel, overall weight: 7,065 kg, Year of construction: 2020, operating hours: 2,670 h, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, programmable additional control circuit with proport. control + AB, programmable additional circuit with proport. control, additional circuit for hydr. quick coupler, programmable additional circuit with proport. Control (electric power tilt changeover) Auxiliary hydraulics installed up to the dipper arm with high pressure shut-off valves, automatic speed reduction system, electric refueling pump, Load holding valve on the lift, stick and adjustment cylinders, overload warning device + pipe breakage protection, ROPS comfort cab, radio, automatic air conditioning, air-sprung driver's seat, key system for all locking functions, Load sensing hydraulic system, automatic hydraulic track tensioning, 400 mm rubber tracks, Adjustable boom: hydr. SW Lehnhoff HS 08 incl. attachment kit, original Powertilt 174° slewing with load hook, electr. grapple changeover Bedpfxjt I Tp Sj Aknoww

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. Bwjdpfx Aog N Db Hjknjw 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software SIEMENS WinAC RTX Outside Roller table for pre-loading (mm 5600 x 2200) + Pre-Loading Buffer Lifting table (mm) 4300 x 2200 Bwjdpst Ah Niefx Aknjw Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher - DUPLUS2 No. 12 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 145 Max clamps opening (mm) 150 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 42 (ca.) OPTIONAL: Optimisation software: HPO

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 6,560 mm, total length: 2,900 mm, 4-way forklift Bwsdjxn A Iqepfx Aknjw Combilift CBE 3000 Drive Electric Year built 2025 Lifting height (mm) 6,560 Lifting weight (kg) 3,000

Year of construction: 1990, condition: ready for operation (used), Now available Used van Aarsen 1400 2D Hammermill incl. feeder with magnet. Bwsdpshbzi Nefx Aknow 200kW 3000 rpm 2 pieces available Amount of hammers: 272 Weight: ca. 5850kg Sieve Diameter: 600mm More information on request

Condition: good (used), Bizerba X Ray Machine With reject facility Fully stainless steel Tests carried out using certified test pieces, non-ferrous, stainless steel, ferrous metals Bodoyivgqspfx Aknjww The unit comes with an option of a Gamma Monitor, Red Eye G20-10 In every day use

Condition: new, total length: 5,080 mm, Year of construction: 2026, load capacity: 9,430 kg, Crane JMG MC 50000TE Drive Electric Year built 2026 Bwjdpfsy Rav Hex Aknow Lifting weight (kg) 9,430