Shrink tunnel 70 digit

minipack-torre Schrumpftunnel 70 Digit

Year of construction: 2025, condition: new, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: in the standard version the label is folded and glued together with the inserted thread. Optionally, a heat-sealing module is available for this production step. Method for attaching the thread to tea bags: by heat sealing into the tea bag edge. Grouped bag output either counted individually or in an erected box (optional). - Specifications: max. speed of the machine in neutral: 115 cycles per minute; dosing volume: max. 10cm³; tea bag dimensions LxW: 65x62.5 mm; roll width tea bag material: 125 mm; suitable tea bag material: 16.5-20g/m², one side heat sealable; 3-side sealed sachet dimensions LxW: 82x75 mm; sachet material: heat sealable mono films or laminated composite film; label (LxW): 28x24 mm; thread length: 220 mm; power supply: 220/380V; power consumption: 2.5W; machine dimensions LxWxH: 1688x1330x2205 mm; weight: 1210kg. Nsdpfx Ahjv Nm Smskowk

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Nwedpeyx Uy Asfx Ahksk Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, The machine is a few years old, but has rarely been used. It can be inspected at our location in Weesp. Nodpfxoxg Hxws Ahkewk

Condition: used, Year of construction: 2014, Manufacturer : Smipack Model: BP800AR 280ST Year : 2014 Type : Automatic monobloc shrinkwrapper   Power : 17,2 KW Output capacity : 17 units / min Pneumatic stacker for rigid products Variable speed 90° infeed conveyor Multilingual menu   Width of infeed conveyor belt: 280 mm Product infeed height : 165 mm Maximum bundle height: 380 mm Nwjdpex R At Iefx Ahkjk Sealing bar: 760 mm  

Year of construction: 1986, condition: used, machine/vehicle number: 1968137, Hot stamping and thermal printing machine Plate size 250 x 250 mm Stroke 160 (250) Nwjdpfxebq Svao Ahkek Pressing force 14 kN

Condition: excellent (used), THERMAL TRANSFER PRINTING SYSTEM WITH PUNCH Nwodpovf Ig Djfx Ahkjk (printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced

Condition: new, Year of construction: 2025, Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications (depending on individual dimensions request): 380V, max. 40kW; ca. 6bar; max. speed of the machine in neutral: 8 cycles/min; max. product dimensions (mm): W(ca.1000-1200)xH(ca.500-600); machine dimensions (mm): L(ca.5600-9500)xW(ca.2000)xH(ca.2000); weight (net/gross): ca.1400-2400/1600-2700kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nwodpfx Asv Nl N Rshkjk

Condition: good (used), functionality: fully functional, electrical fuse: 16 A, input frequency: 50 Hz, input voltage: 400 V, power: 2 kW (2.72 HP), funnel diameter: 650 mm, ejection height: 1,100 mm, type of input current: three-phase, DGUV certified until: 07/2027, overall weight: 500 kg, Weighing system Scheurer SV 140 E Nwsdpfjyaki Iox Ahkok LED display for weight adjustment with central lubrication robust technology machine is mobile with 2 locking mechanisms belt: Mehler discharge conveyor belt, height-adjustable, long connection: 400V, 16A-CEE plug used machine Optional: Maintenance contract Spare parts box Service package Delivery service Instruction and commissioning Visit our large showroom!

Condition: good (used), Linde Cryoflex CTFA4-60 Cryogenic Freezer Serial: 3002097/2 Nwedpfewbnvcex Ahksk 2011, This continuous conveyor belt in a sub-zero tunnel was developed specifically for operators keen to avoid unnecessary handling and transportation of parts requiring sub-zero treatment. The CRYOFLEX® T freezer can be easily integrated into continuous hardening lines. It is well suited to mass production of small or thin parts such as injectors, springs, nuts and bolts. The standard temperature range extends from room temperature to -110°C (-166°F), Stainless mesh belt dimensions 4000mm x 600mm, 3Ph

Condition: good (used), This sturdy workbench is perfect for DIYers and professionals who need a stable work surface with storage space. The work surface is made of 38 mm chipboard with a high quality canted flat sheet laid on top, providing a solid foundation for any type of project. Underneath the work surface is a shelf with 12 drawers (6 drawers per side), providing plenty of storage space for tools, materials and accessories. Included in delivery are: 01x workbench, used/ new System: SSI Schaefer Type: PR 600 Dimension: approx. W 2.900 x D 800 x H 940 mm consisting of each: 02x workbench stand, II. choice (new goods) material color: sendzimir galvanized stand height: 900 mm stand depth: 800 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 02x workbench crossbars, new Material color: blue box profile: 110 x 40 mm clear width: 2.700 mm 04x safety pins, used execution: completely galvanized 01x chipboard, used dimension: 2.900 x 800 x 38 mm if necessary in two parts 08x drilling screws, new finish: galvanized Dimensions: 6.3 x 70 mm 01x steel cover, new Material color: sendzimir galvanized Dimension: 2.900 x 800 x 40 x 1 mm 01x shelf rack, II. choice - incl. pull-outs - System: SSI Schaefer Type: R 3000 consisting of each: Nwedpfx Ajmrqk Rshkjk 12x ESCH 9420 incl. pull-outs, II. choice 12x side panel SBL-ESCH 4200, pair, I. choice 06x frame 400 x 735 mm, II. choice 06x frame connector RV 3006, I. choice 08x Longitudinal bracing LV 3133, I. choice 08x intermediate shelf ZB 9415 V, I. choice Note: The workbench is delivered in an unassembled condition. The shelf rack is already pre-assembled upon delivery.