Loading platform

Mercedes-Benz GLE 300 d AMG BURM+AHK+AIRM+PANO+MEMORY+21"

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6.000 mm - turning diameter over bed: 1.550 mm - turning diameter over support: 1.220 mm - turning diameter in bridge recess: 1.880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 8.500 mm width: 2.130 mm height: 1.550 mm total weight: 14.100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Iajdpfx Aev Ab Dqehvsp Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post - Standalone chip and splash protection back wall over the whole machine length - inverter in the E-cabinet with slow-start-function and 1 x stepless potentiometer controller

Condition: used, Aufspannplatte - Tisch einer Langhobelmaschine - Tischbreite/Aufspannbreite: 1845 Tischlaenge/Aufspannlaenge: 5505 mm 7 T-Nuten laengs fuer T-Nutensteine: M 30 T-Nutenabstaende zueinander: 263 mm Gesamtlaenge: 6230 mm Plattenhoehe insgesamt: 350 mm Ijdpfx Asbn Amfjhveap Gewicht: 11 t

Condition: excellent (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centring hole: 100 H6 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Slot distance: 160 mm The displacement is measured via a ROD 250 rotary encoder. Condition: Very good (used) Optionally with machine bed (travel = 2000 mm ) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Ijdpfjfk R Tdsx Ahvjap Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

Year of construction: 1999, condition: used, CAPACITY 2000kgr Iaedpfx Ahewa I A Tevsp HEIGHT 4.7M & 5M ARM LENGTH 3.2M 2 PIECES

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: Isdpfx Ahsvf E Avjvoap The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Year of construction: 1992, condition: like new (used), machine/vehicle number: Div1, Technical data: 1x Demag KBK 1 pillar slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125to payload Height: about 3.5m UK outrigger: approx. 3m Outreach: approx. 4m Hook height: approx. 2.55m Weight complete approx. 450 kg with steel or Demag chain hoist 125 kg depending on stock incl. bolts, drag cable, chassis, end cap etc. Various cranes are available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Ijdpfxsng H T Ue Ahvoap Dispatch by forwarding agent or pick-up only by appointment

Condition: like new (used), machine/vehicle number: DCMS, Year of construction: 2007, Demag manulift chain hoist lifting capacity : 125 kg Lifting height : 2.8m reeving : 1/1 lifting speed : stepless 0.15 - 30m/min version: equipped with suspension eye used in very good condition (fully checked) (new price € 3353,-) Iasdpfx Ahog Stp Hjvjp multiple DCMS hoists available

Condition: used, mileage: 51,666 km, power: 118 kW (160.44 HP), fuel type: hybrid, gearing type: automatic, first registration: 12/2021, color: grey, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, Current mileage: 51,666 km, of which 30,541 km purely electric Warranty package valid until 03.12.2026 (can be extended upon request) VAT deductible Digital services extended until 03.12.2026 (can also be further extended) Special equipment: * Ambient lighting, * Business Package, * Exterior mirrors with Blind Spot Assist, * Adaptive High Beam Assist, * Infotainment System: Remote & Charging Services Plus, * Connectivity Package, * Charging cable for public charging stations, * Load compartment package, * Electrically adjustable lumbar supports in front seats, * Metallic paintwork, * Front center console with roller shutter/storage compartment, * Multifunctional telephony, * Night Package, * Parking package with 360° camera, * Heated windscreen washer system, * Electrically adjustable driver's seat (with memory function), * Mirror package Additional equipment: * Passenger airbag deactivation, * Driver and passenger airbags, * Acoustic environment protection (external sound), * Electrically adjustable and heated exterior mirrors, both sides, * Exterior mirrors in vehicle color, * Front pelvic airbags (pelvis bag), * Integrated sunglasses compartment in headliner, * DAB tuner (digital radio reception), * AMG Line design and equipment line, * 75 kW electric motor (hybrid drive), * AGILITY SELECT / DYNAMIC SELECT (drive mode selection), * Active brake assist, * Active lane keeping assist, * Speed limit assist, * Live Traffic Information system, * Traffic sign recognition, Ijdpfxjxax Tao Ahveap * Vehicle setup (online services/apps), * Vehicle monitoring (vehicle tracking system), * Electric windows front and rear, * 8-speed dual-clutch transmission DCT, * Hybrid 160 kW (engine 1.3 liter – 118 kW), * 5-door bodywork, * Keyless-Go start function, * Automatic climate control (THERMATIC), * Driver's knee airbag, * Comfort suspension (Agility Control), * Communications module (LTE) prepared for Mercedes me connect, * Window airbag system, * Charging cable with household plug (Schuko), * Leather (sport) multifunction steering wheel, * Light and Sight package, * Mercedes-Benz emergency call system, * MBUX multimedia system (digital multimedia system), * and much more. * Errors and prior sale excepted

Condition: used, Year of construction: 1982, Technical details: Ijdpswtctyofx Ahvjap faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: 450 mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet *

Year of construction: 2006, condition: excellent (used), machine/vehicle number: W144, Technical data: 1 Demag KBK column slewing crane NL 50 KG Payload at full radius 50 KG payload Height: approx. 3.8m, UK boom: approx. 3.3m Projection: approx. 5m, hook height: approx. 2.95 m Weight completely approx. 300KG with 125Kg steel ST chain hoist with floor control (2 lifting speeds) Ijdpop Artdefx Ahveap Connection to 400V 16A, swivel range 270° Crane is dismantled and packed on a pallet Test book is available Very good condition, see pictures Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Shipping by courier or collection by appointment