Standard tractor

Mercedes-Benz Actros 1845 GigaSpace Euro 6 / Auromatic / 60 %...

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Itedpevwlqqsfx Ah Njb Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, mileage: 899,992 km, power: 331 kW (450.03 HP), first registration: 09/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2028, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2013, Equipment: air conditioning, Internal vehicle number: G200181 German vehicle On our yard in Kaufungen - Kassel, available immediately More information at Itedpju Hvyxefx Ah Njb * Luis Lucena * Viktoria Sologubova   Mercedes Benz Actros 1845 Year of manufacture 2013 Automatic Retarder   Errors excepted   We are happy to accept your used vehicle as payment. Financing is possible directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: not inspected (used), Hydraulic press for pressing paper etc. materials. The device was operational before disassembly. Press dimensions: length 4850 mm, width 1370 mm, height 3000 mm (possibility of reduction 2300 mm). Weight 3500 - 4000 kg. If you have any questions, please contact us at 539 660 495. Itodpfx Ahoh Nyfyj Nsb

Year of construction: 2004, condition: ready for operation (used), Connected load: 15.5kW, weight: 6.8t. Itodpfxsip D Rzs Ah Neb

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, transport height: 2,300 mm, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Iodpjxl Rqbofx Ah Notb Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Condition: used, mileage: 709,000 km, power: 310 kW (421.48 HP), first registration: 05/2004, fuel type: diesel, number of seats: 51, gearing type: mechanical, emission class: euro3, brakes: retarder, Year of construction: 2004, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Mercedes Benz O 350 Tourismo * First registration: 05-2004 * EURO 3 * Manual transmission * Air conditioning * 50+1 sleeper seats * Retarder Itedpoxvhbxjfx Ah Neb * Toilet * TV * MB engine 310 kW / 410 HP V6 * More pictures and videos via WhatsApp * Information without guarantee; subject to prior sale.

Condition: excellent (used), mileage: 1,130,000 km, power: 460 kW (625.43 HP), first registration: 02/2013, Equipment: parking air conditioner, For sale: tractor unit or combination Volvo FH 13 EEV, year 2013, 460 hp. Mileage: 1,130,000 km. Features: stationary air conditioning, air suspension front and rear, factory ADR, refrigerator. SCHMITZ STANDARD semi-trailer, year 2013: serviced, sliding roof, pallet boxes, 385/65/22.5 tires, SAF axles, good floor, holder for 2 spare wheels. Semi-trailer Smitz. Itjdpew A Imwefx Ah Neb

Condition: used, mileage: 894,856 km, power: 375 kW (509.86 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 7,999 kg, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, brakes: VEB, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, front tire size: 385/50R22,5, rear tire size: 295/60R22,5, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, onboard computer, parking heater, spoiler, truck registration, Volvo FH 500 with stationary air conditioning | EURO6, I-Shift, VEB+ | Refrigerator, large tanks | Hands-free system, multifunction steering wheel | Parking heater, heated seats | Electric windows, electrically heated mirrors | Remote control, radio/CD | Distance warning, lane-keeping assist | Tires: FA 315/60R22.5, RA 295/60R22.5 | Austrian vehicle | TÜV valid until | Subject to errors, input mistakes, and prior sale. Isdpfxex Eww Rs Ah Nstb

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 63,000 kg, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-130s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines can not reach. Iodpsx Sczzefx Ah Netb -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-130s Production Capacity: 400-450 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1270x1200 mm CSS Setting: 0-50 mm Total Power: 500 kva Vibrating Screen: 1500x4200 mm Weight: 63 tons - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2016, loading space length: 13,640 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Internal vehicle number: 10112----* Edscha sliding roof * Air suspension * Disc brakes * BPW axles ----Internal vehicle number: 10112 Subject to errors and prior sale Itedpfx Ahsuztzve Njb WhatsApp support available! For questions about the vehicle or further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp