Telehandler

Manitou MRT2550+ Telescopic forklift w/ pallet forks

Condition: new, thread dia. M3 - M16 mm max. 187 U/min. working area 180 - 2000 mm engine output 0,7 kW Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: Gsdpfxofg U Sqs Agbeil variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available: M14 to M24 and M27 to M33.

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a External cylindrical grinding machine EMAG Weiss WPG 7 - external cylindrical grinding at the highest level and on the smallest footprint. Footprint of the WPG 7 is only 1,800 x 2,400 mm. The machine is perfect for machining small shafts or pinions. The WPG 7 can be loaded manually as well as by automated solutions (such as chain conveyors and linear gantry). CONTROL Fanuc 0i TECHNICAL DATA Workpiece length: max. 250 mm grinding Ø: max. 80 mm Center height: 100 mm Center length: 380 mm Workpiece weight: max. 30kg Grinding wheel Ø: max. 500x 80 mm Gisdpfx Astlrkbogbjl Price, delivery time and equipment of the machine according to agreement.

Condition: used, Year of construction: 2007, turning diameter 470 mm turning length 2500 mm control Siemens Sinumerik 840 D work height max. 1300 mm swing diameter over bed slide 750 mm swing over bed 780 mm diameter of quill 160 mm taper bore MK 5 tool numbers 48 weight of tools max. 15 kg tool length - max. 500 mm total power requirement 123 kVA weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 3,3 m C-axis: - Speed range - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis mm/min - Z-axis - mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle drive with 2-stage gearbox: - Drive power at 100/60% duty cycle: 37/45 kW - Total speed range: 10–2,500 rpm - Number of speed ranges: 2 - Speed range I: 10–775 rpm - Speed range II: 20–2,500 rpm - Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm) Equipment/accessories: - Forkardt power chuck with one set of hard and soft jaws each - Hydraulic steady rest - Tailstock with center point - Chip conveyor - Coolant device - 5 HSK 100 A holders Godpfsw Rf Tisx Agbsil - Technical documentation

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 15 h, load capacity: 6,000 kg, lifting height: 26,000 mm, fuel type: electric, mast type: telescopic, construction height: 3,100 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Elektro, construction width: 2,500 mm, Rotating telehandler Gjdpexg Utvefx Agbsil Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire size: 18 - 22 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 18 - 22 Rear tire condition: 80 - 100% Description: 100% electric. The MRT 2660 e is a truly versatile tool for your material handling operations with zero emissions, low noise levels, and minimal energy consumption. 6,000 kg maximum capacity, 22 m lifting height. Lithium-ion battery ensures low maintenance, opportunity charging (partial and frequent battery recharge) and long service life. Modular design: possibility to add a second battery to increase autonomy, or a range extender (combustion engine that charges the battery) for hybrid operation. All the benefits of the MRT Vision+ (visibility, performance, comfort) in a fully electric version. 3rd hydraulic circuit, heater, full cabin, air conditioning.

Condition: used, Year of construction: 2017, operating hours: 1,761 h, Field of application: Construction Drive: Track Please contact Martin Gervink for more information Gsdpfx Asv D U D Togbsil

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 4,200 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 8,000 kg, total length: 4,730 mm, drive type: Diesel, construction width: 2,310 mm, Telescopic forklift rigid Gedoxgy Hhjpfx Agbsil Mast type: Telescopic Technical condition: New Front tires size: 460/70 r 24 michelin xcml Rear tires size: 460/70 r 24 michelin xcml

Condition: new, functionality: fully functional, Year of construction: 2023, load capacity: 25,000 kg, lifting height: 3,500 mm, free lift: 1,750 mm, fuel type: diesel, mast type: duplex, construction height: 3,670 mm, power: 185 kW (251.53 HP), fork length: 2,400 mm, drive type: Diesel, Diesel Forklift Load centre: 1200 mm Fork width: 250 mm Fork thickness: 110 mm Mast type: Duplex Transmission: Dana TE14000 Condition: New equipment Gsdoq D S Dkjpfx Agboil Technical condition: New Front tyre type: Pneumatic Front tyre size: 14.00 x 24 Rear tyre type: Pneumatic Rear tyre size: 14.00 x 24 Side shifter, fork positioner, 3rd valve, 4th valve, Kalmar comfort cabin: EGO air conditioning ECC with fresh air filter, tinted windows and laminated safety glass windscreen, door holder for open door (left side), sunblind for roof window, air-suspended and reinforced leather Grammer Actimo XL driver's seat with seat heating, lap belt and horizontal suspension, Radio with DAB+/CD/RDS/MP3/USB/AUX/Bluetooth/hands-free/streaming, 12/24V power inverter incl. 2 x 12V and 2 x 24V sockets, load weight indicator in display, direction selector switch integrated in lift hydraulic lever, 2 additional external mirrors mounted on B-pillars, LED rotating beacon, height adjustable, KALMAR SV/GV carriage with centre level compensation, width B = 3,000 mm, Kalmar forks, fork length l = 2,400 mm, fork cross-section b x a = 250 x 110 mm, Terminal-West quick-change system for SV/GV fork carriage, forks tapered 500 mm from fork shank to 15 mm at the tip, elevated air intake for air filter incl. pre-separator, engine heater 220V, accumulator for lift hydraulics, separate tanks for brake and working hydraulics incl. hydraulic oil cooler, mudguards on drive axle, mudguards on steering axle, anti-slip coating on front wheel covers and tank, 2 extra LED headlights in mast below standard headlights, 2 extra LED headlights on front cab corners oriented in driving direction, 6 extra LED headlights on rear cab corners with guard, 2 extra LED headlights on wheel covers, electronic inching - enables precise low-speed driving with simultaneous full lift speed, acoustic reverse warning signal - multi-frequency bass tone (only audible in the immediate vicinity of the machine), automatic central lubrication system on steering axle and fork carriage, 6 kg (powder) fire extinguisher EN3, reversing camera mounted on cab roof with monitor (colour) in cab, mast camera linked to the in-cab monitor (in combination with reverse camera), Monitor HD 7 QUAD-view, tyre pressure monitoring integrated in display.

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 17065, Manufacturer: henning Model: U6/1000 Machine no.: 17065 Year of construction: 1979 Weight: 1.100 kg General / technical data: used mechanical vertical broaching machine Henning, in working condition Tractive force: 6,000kg (60KN) Clearing speeds: 3m/min and 6m/min Return speed: 6m/min maximum stroke: 1,000mm maximum tool length: 1,200mm table size / work surface: 600x460mm / 480 x340mm Table aperture: Ø 170mm with eccentric table insert with Ø 90mm bore for standard broaching mandrels (Rausch system) Workpiece diameter: any Dimensions (h x w x d): 1,650mm x 1,200mm x 700mm (h= table height to floor without superstructure) Motor: 7.4 /10kw Power supply: 380 Volt / 50 HZ Giedpjup Uzfjfx Agbjl Accessories / special equipment: - Integrated coolant system - Return circuit with double actuation mode - Machine documentation - Automatic clamping jaw opener in the lower drawbridge position (tool removal) - Tool clamping with universal clamping jaws for flat shanks DIN 1416 BL 6 Remark: The machine is in original condition, the function has been tested. The machine is mechanically driven by a trapezoidal threaded spindle and a geared motor. In contrast to most mechanically driven broaching machines in which the trapezoidal spindle forms the drive and guide element, this machine has additional guide columns. The machine is therefore additionally column-guided and very stable. The double spindle drive is ideal for a continuously constant cutting speed, even with higher tensile forces. The machine is in our warehouse and can be inspected under power.

Condition: new, Bernardo TM 16 BLO/ R 1100 Electric thread cutting machine Technical specifications Tapped holes* M3 - M16 Speed max. 120 - 325 rpm Adjustable angle 0° - 90 Max. Working radius R 1100 mm Quick change chuck DIN 371: M3 / M4 / M5-6 / M8 / M10 DIN 376: M12 / M14 / M16 Motor power 600 W Voltage 230 V weight approx. 26 kg * Material strength 400 N / mm2 Scope of delivery Operation via touch screen Digital drilling depth display Micro spray system Blow-out device Quick change chuck Quick change chuck according to DIN Electric motor 90° angle adjustment Mounting flange Features Standard with micro-spray system for constant cooling and minimal cooling lubricant consumption Including blow-out device for removal of chips, thus optimal view of the drill hole Including quick-change chuck for the use of taps for through and blind holes Swiveling motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed right angle (90°) High productivity, significant time savings compared to manual thread cutting Quick-change chuck with integrated slip clutch prevents tap breakage Including swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Gjdpfx Agopag Npobsil Price: Base 900 x 600 mm with 2 drawers for TM series 830,00

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2-021-810-002, Offer 25221 Technical data: - Load capacity: 2000 kg - Outreach: approx. 3000 mm - Slewing radius: approx. 180° - 2 lifting speeds: approx. 3.0 + 0.75 m/min - Hook travel: approx. 3000 mm - Chain hoist control via hand remote pendant - Manual slewing of boom + manual trolley travel - Boom IPE 300 - Overall height with slewing arm holder: approx. 1220 mm - Power connection: 400 V - Weight: approx. 500 kg Godpfewvtpdjx Agbsil - Test book