Telehandler

Manitou MRT2150+ Diesel, 4x4x4 Drive, 5t Cap. 20.6m Boom,

Condition: like new (used), Year of construction: 2008, operating hours: 8,348 h, functionality: fully functional, machine/vehicle number: 2887, pressure: 8.5 bar, power: 2.276 kW (3.09 HP), operating pressure: 8 bar, temperature: 176 °C, total height: 2,950 mm, total length: 5,100 mm, nominal heat output: 2.276 kW (3.09 HP), total width: 2,400 mm, empty load weight: 6,500 kg, Equipment: CE marking, ATTSU RL3000/8 steam generator on sale. The steam generator is in very good conditions and has a low mileage of 8348 operating hours. The generator was used in a factory of pickled vegetables which stopped activity. The boiler has been kept preserved ever since. The boiler includes a fuel oil burner (optional), but can be fired with gas. An inspection on the boiler was performed in June 2025 by a boiler specialist which include thickness measurements and pressure test. The test results were favourable. Boiler Datasheet Manufacturer: ATTSU Model: RL 3000/8 (tube fired) Burner: Fuel oil Serial Number: 2887 Ijdpfxjwxd Ato Ag Ijib Steam Production: 3000 kg/h of saturated steam Rated Pressure: 8.3 bar Test Pressure: 12.5 bar Volume: 3125 liters Year of Manufacture: 2008

Condition: used, power: 127 kW (172.67 HP), fuel type: diesel, lifting height: 20,600 mm, Year of construction: 2011, operating hours: 7,043 h, Technical information Make of engine: Mercedes-Benz Top speed: 36 km/h Empty weight: 17.500 kg Functional Lifting capacity: 5.000 kg Identification Serial number: 769994 Other information Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: BKT Transport dimensions (LxWxH): 7.96x2.43x3.05 Ijdpev Rk Smofx Ag Isib Additional information Please contact PFEIFER GROUP for more information

Condition: repair required (used), Nice wheel loader – starts, drives, and brakes well. Year of manufacture: 2004. Hours unknown. Extra function. Lighting does not work. Comes with Dutch registration. Needs some work. Quick coupler does not release properly, it's stuck (jamming?). Ijdpfjywfp Esx Ag Ijib

Condition: used, Year of construction: 2018, operating hours: 9,000 h, Equipment: ABS, all wheel drive, CAT 444F Machine is in very good condition Iiodpowy Hhhsfx Ag Ieb air conditioning

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Ijdpfx Agjfm T Hbj Ioib Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: used, Year of construction: 2022, operating hours: 2,700 h, Equipment: all wheel drive, Caterpillar 434 Backhoe Loader 2,700 hours Iijdpfxsxpqgqs Ag Iob * Model number: 434 * Year of manufacture: 2022 * Operating weight: 9,520 kg * Excellent condition

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Iijdpefg E Hzofx Ag Ieb Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: used, fuel type: diesel, lifting height: 29,450 mm, axle configuration: 4x4, Year of construction: 2013, Equipment: all wheel drive, Technical information Chassis type: rigid Drive: Wheel Top speed: 20 km/h Empty weight: 23.000 kg Functional Lifting capacity: 4.999 kg CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 8,08x2,55x3,15 Production country: FR Additional information Please contact Christian Theißen for more information = Additional options and accessories = - Forks = Remarks = Manufacturer: Manitou Model: MRT 3050 Year of build: 2013 Condition: Used Data: Iodpfev Ti Hnsx Ag Isib Max. lifting height: 17,66 m Lifting capacity: 4.000 kg Max. extension: 15,66 m Length forks: 1,20 m Drive type: Diesel Dimensions (without forks): LxB 6,00 x 2,37 m Stowed height: 3,04 m Rotation range: 400° Empty weight: 14.600 kg Special features: All-wheel drive, four-wheel steering, supports, automatic attachment detection, permanently installed particulate filter.

Condition: used, color: gold, Year of construction: 2019, operating hours: 2,320 h, Year of manufacture: 2019 Empty weight: 1.500 kg Dimensions (LxBxH): 386 x 98 x 232 cm = Additional options and accessories = - Seat heater Iijdjxk Tdnopfx Ag Iob

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 110 h, load capacity: 200 kg, empty load weight: 6,550 kg, construction height: 1,990 mm, fuel type: electric, total length: 5,480 mm, drive type: Elektro, arm reach: 7,000 mm, construction width: 1,200 mm, working height: 11,950 mm, Articulated telescopic platform Technical condition: very good Front tires type: solid rubber Front tires Condition: 80 - 100% Rear tires Type: Solid rubber Rear tires Condition: 80 - 100% Iedpfjv I Hipox Ag Ieib Description: The Manitou 120 AETJ-C electric articulated platform has a lifting capacity of 200 kg at a working height of up to 11.95 m. It meets all your requirements for working at height. It meets all your requirements for indoor and outdoor work. The overhang height of 4.77 m in combination with the 7 m offset of the work surface offers a wide range of possible applications. The narrow design of the chassis (1.2 m) and the lifting structure ensure high maneuverability in narrow and congested areas. The standard drive battery guarantees many operating cycles and a long service life. For better access to work areas, a 3D version of the 120 AETJ-C slewing device is available (as an option).