Car carrier truck

MAN TGL 12.250 4x2 BL Autotransporter

Condition: new, power: 177 kW (240.65 HP), fuel type: diesel, color: yellow, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, Vehicle transporter for transporting 3 vehicles. Car, van or caravan * Motor vehicle with superstructure for transporting 1 passenger car or a van or camper van * Loading area lower platform: approx. 660 x 250 cm. * Hot-dip galvanized body * Interior dimensions 660 x 250 cm. Trailer: * BLYSS - Single-axle center-axle trailer max. 9,000 kg GVW * Loading area approx. 960 x 240 cm. * Internal dimensions approx. 990 x 250 cm. * 10 tons BPW axle * ABS * Trailer equipped with perforated road plates * Vehicles can be secured in any position according to DIN * Trailer hot-dip galvanized Load securing also available from us: * Tensioning and lashing straps * Locking beams * Warning vests * Transport boxes * Edge protectors * Dunnage bags * Wheel stoppers * etc. Financing and leasing possible We manufacture bodies of any size on any chassis. Kjdpfx Ajm Tkcijh Nsdg Tarpaulin, GRP sandwich, aluminum. visit us at: Bodies- Complete vehicles- Trailers- Advice- Financing Subject to errors and prior sale, no liability for printing and input errors.

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Kdedpon N Ekcsfx Ah Nog Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: used, Pillar drilling machines Kdsdpfxsb N Ezro Ah Neg

Condition: new, mileage: 10 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 3,900 mm, loading space width: 2,040 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, German new vehicle: * Unregistered * Euro 6 * 6-speed gearbox * 3 seats Kdjdpfenq Eh Uox Ah Neg * Gross vehicle weight 3,500 kg * ABS + ESP * Driver airbag * Cruise control * Reinforced rear axle suspension * DAB radio with Bluetooth and steering wheel controls * Central locking with remote control * Electric windows * Electrically adjustable/heated exterior mirrors * Trailer coupling with 3,000 kg towing capacity Three-way tipper: Subframe: Steel, hot-dip galvanized * Floor: Galvanized steel sheet * Operation: Electro-hydraulic with remote control * Aluminium side walls, 40 cm high * Mesh leaf guard extension, 58 cm high, swingable * Lashing eyes in the floor * Internal dimensions approx. LxWxH 390x204x40 cm Load securing equipment also available from us: * Tension and lashing straps * Cargo bars * Safety vests * Transport boxes * Edge protectors * Airbags for load restraint * Wheel chocks * etc. Financing and leasing available We manufacture superstructures of any size for any chassis. Tarpaulin, GRP sandwich, aluminium lightweight construction Visit us at: Superstructures - Complete vehicles - Trailers - Consulting - Financing Errors and prior sale excepted; no liability for typing or input errors.

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) Kdjdpsharwvjfx Ah Nog - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: new, power: 184 kW (250.17 HP), fuel type: diesel, overall weight: 11,990 kg, color: grey, gearing type: automatic, loading space length: 6,000 mm, loading space width: 2,550 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, IMMEDIATELY AVAILABLE CERTIFIED ACCORDING TO VDI 2700, 8:1, 8:2 * Photos do not show the original vehicle. Kdedpfxjfq Nckj Ah Neg The actual trailer is equipped with a twin axle. Current photos to follow. Vehicle transporter MAN TGL 12.250 4x2 BL: * Rear axle with air suspension * PTO (power take-off) * Cab with 2 individual seats * Sleeping compartment * Auxiliary heater * Radio * EU tachograph 4.1 * GSR 2 equipment Car transporter body DS12 [MODULO]: * Double-deck body for transporting 2 passenger cars or 1 small van/mobile home * Lower deck loading area approx. 600 x 255 cm * Lifting deck approx. 400 x 240 cm * Winch with remote control (wireless and wired) * Body hot-dip galvanized Trailer: * BLYSS air-braked trailer for 3 passenger cars * Twin axle with twin tyres, GVWR 18,000 kg * Payload approx. 13,500 kg * Loading area approx. 900 x 255 cm * Rear section extendable by approx. 150 cm * Lifting deck approx. 450 x 240 cm * BPW axle * ABS * Trailer with perforated driving plates * Vehicles securable in any position according to DIN * Trailer hot-dip galvanized Optional Tandem axle with twin tyres, GVWR up to 18,000 kg * Payload up to approx. 13,500 kg Load securing equipment also available from us: * Lashing and tension straps * Load bars * Safety vests * Transport boxes * Edge protection * Dunnage bags * Wheel chocks * etc. Financing and leasing available We manufacture bodies of any size and type for any chassis. Tarpaulin, GRP sandwich, aluminium. Visit us at: Bodies – Complete vehicles – Trailers – Consulting – Financing Subject to errors and prior sale. No liability for misprints or input errors.

Condition: used, mileage: 64,950 km, fuel type: diesel, color: white, emission class: euro5, Year of construction: 2007, Equipment: crane, IVECO STRALIS 360 Year 2007 Kdedpfxewvafro Ah Neg Diesel / Euro 5 Kilometres: 64,950 Manual gearbox / Displacement 7,790 / 265 kW Gross Vehicle Weight 26,000 kg Payload 11,700 kg Wheelbase 3,800 mm Fixed platform body 5,400 x 2,520 x deck height 1,300 mm Crane FASSI F31 ACXP.26 - rear outriggers - radio remote control

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Kdedpfx Ahsiknv Es Neg

Year of construction: 2007, condition: good (used), Used 4.4kw Bystronic Byspeed CNC laser for sale Used Bystronic 4.4kw lasers for sale VIDEO BELOW: Byspeed 3015 4.4kw Ksdpfjgwa Swjx Ah Nsdg Installed new/year: 2007 Manufacturer: Bystronic Model: Byspeed 3015 Sheet size: 3metre x 1.5metre / 3000mm x 1500mm Laser power: 4.4kw / 4400 watt Control: ByVision CNC02 Automation n/a Year: 2007 Condition: good working condition / service from new Byspeed 3015 4400w March 2010 Power on: 44,189 hrs Cut time: 20,490 hrs Good condition machine that has been covered from new by service contract with Bystronic UK. Options Included: Bypos automatic focus CutControl 2 cutting heads Tools and accessories Torit Dust collector Delivery, installation and tuition available at extra cost.

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? Kedowbil Sspfx Ah Nedg For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.