Used Zeiss Zeiss Contura Vast Xt Gold Cmm for sale (1,666)

Condition: excellent (used), Year of construction: 2020, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 800 mm, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, We are offering the following: a Zeiss CONTURA 9/18/8 Vast XT Gold CMM in very good condition, manufactured in 2020. Type: CMM CONTURA 9/18/8 Year of manufacture: 2020 Operating voltage: 100–240 V Itodpfx Ajzuzf Isbnsk Frequency: 50–60 Hz We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one. The data, taken directly from Zeiss's service log (as of June 2025): - 10,284 operating hours - 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km) - Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it - Zero significant component replacements - Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it. Probe head: VAST XT Gold Software: Calypso CNC 7.2 + QS-Stat-out Included accessories: PC, monitors, sensor rack Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories. Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary) It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use. If you have any questions or need further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo 9/15/7 MASS VAST GOLD - RDS+VAST XXT Year of manufacture: 2004 Retrofit 2024, last calibration 01/2025 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition. Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system RDS sensor system with VAST XXT Probe changer magazine MSR 10-position VAST Gold Probe changer magazine 3-position VAST XXT Probe changer plate 8x VAST Gold Probe changer plate 3x VAST XXT Iodezk Id Aopfx Abnotk Reference probe Temperature probe Probe accessories Calibration sphere HP Z4 workstation WIN11 with monitor Calypso Basic 2024 software Curve and QS-Stat options Calypso upgrade and other options possible Further accessories and options possible Available for short-term delivery.

Condition: new, Year of construction: 2023, functionality: fully functional, workpiece weight (max.): 3 kg, total length: 50 mm, overall weight: 5 kg, year of last overhaul: 2026, maximum load weight: 4 kg, Equipment: documentation/manual, type plate available, We offer this new ZEISS VAST XT coordinate measuring machine, year of construction 2023. Manufacturer: ZEISS Ijdpfxezuur Is Abnotk Model: VAST XT Year of Construction: 2023 Condition: new Category ID: 402 Type ID: 1927 Machine Type: coordinate measuring machine If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Zeiss CNC Coordinate Measuring Machine Prismo Mass VAST GOLD Year of manufacture: 2021 Last calibration: 02/2025 Measuring range: X = 1200 mm, Y = 1800 mm, Z = 1000 mm In technically and optically new condition The machine was located in a climate-controlled precision measuring room Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor technology 9-position probe changer magazine Reference probe Temperature probe Probe changer plate, 7 positions Calibration sphere Itsdpfx Abszr I R Ejnok HP Z4 workstation with monitor Calypso Basic 2022 software Options: Curve module, QDAS converter, and PiWeb Reporting Further accessories and options available Available for immediate delivery

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC coordinate measuring machine Prismo 9/15/7 VAST GOLD Year of manufacture: 2000 Retrofit 2024, last DAkkS calibration 12/2021 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition Device features, equipment: C99 control system with BP26 operating panel Automatic temperature compensation VAST GOLD sensor system Probe changer magazine MSR, 10-position VAST Probe changer plate, 8x VAST Reference probe Itodpfx Aozq U Rcobnjk Temperature probe Probe accessories Calibration sphere HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software Options: Curve and QS-Stat Calypso upgrade and other options possible Further accessories and options available Available for immediate delivery

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC coordinate measuring machine Prismo VAST GOLD Year of manufacture: 2001 Retrofit in 2024 and 2026, last calibration 11/2023 Measuring range: X = 900 mm, Y = 1800 mm, Z = 700 mm In excellent technical and optical condition. Itedpfx Abszkhzhsnok Device features, equipment: C99 control system with control panel Automatic temperature compensation VAST GOLD sensor Probe changer magazine, 17-position Probe changer, 20 positions Probe accessories Calibration sphere Reference probe HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software QS-Stat option Calypso upgrade and other options available Further accessories and options possible Available on short notice

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, controller model: C98 mit Bedienpult, The machine was retrofitted in 2019 and equipped with a new computer running Calypso software and the VAST Gold probe head! The last calibration was performed in June 2021! TECHNICAL DETAILS Measuring range X-axis: 900 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 700 mm MACHINE DETAILS Control: C98 with control panel EQUIPMENT VAST Gold probe head 7-position probe change magazine Probe change rack Probe accessories Calibration sphere Technical documentation Itodpoya Hfxefx Abnok Workstation with monitor Calypso Basic software

Condition: used, Year of construction: 2010, 2010 Carl Zeiss CONTURA® G2 RDS Bridge Type CMM Iodpfx Abezt Satenstk Axis Travel 'X'=700mm , 'Y'=1,000mm , 'Z'=600mm. Maximum Table Load 730kg. Volumetric Accuracy 1.7 + L/300µm. Table Dimension L1,050 x W827mm. Zeiss RDS Vast XXT Articulating Scanning Probe (2.5º increments). Distance Between Table And Probe Head 716mm. With Calibration Sphere, Joystick Control & 3 Position Probe Rack. Overall Weight 1,550kg.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201502530269, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, table load: 560 kg, Equipment: documentation/manual, type plate available, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of Manufacture: 2015 | Commissioned: 2016 | Immaculate Condition | Extremely Low Operating Hours We are offering for sale a ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe head. The device comes from a controlled laboratory environment and was used exclusively on-demand, single-shift operation, never on a production line – resulting in exceptionally low actual usage and outstanding technical condition. 🔹 Basic Information Itsdjyzmbdepfx Abnjk Manufacturer: ZEISS Model: Contura G2 Measuring Range (X/Y/Z): 700 / 700 / 600 mm Year of Manufacture: 2015 Commissioned: 2016 Technical and Visual Condition: Perfect Measurement Error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration and Accessories ✅ ZEISS VAST XXT TL1 active scanning probe head ✅ Stylus rack / magazine ✅ Set of measuring styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere ✅ BP26_SE control console 🔹 Usage History Device used exclusively in laboratory conditions Occasional, project-based (on-demand) use Single-shift operation, no serial or production work As a result, the machine exhibits extremely minimal mechanical wear 🔹 Service and Calibration ✅ Service and calibration exclusively by official ZEISS technicians ✅ Regular maintenance according to manufacturer guidelines ✅ No third-party interventions ✅ Device fully operational 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Full documentation included ✅ Buyer arranges transport

Condition: used, Original ZEISS CMM Probe Holders and Stylus Extensions Itsdpfxszg Eczs Abnsk Original ZEISS probe holders Stylus extensions Various star styli and straight styli As shown in the pictures Condition: Used Good working condition Carefully removed from a functioning ZEISS CMM Ideal for ZEISS CMM users looking for original replacement or additional probing equipment.

Condition: refurbished (used), functionality: fully functional, Used machine retrofitted with new CNC-controller and new 3D-geometry-software The equipment of the measuring machine is freely selectable. We procure the right components from the customer "just in time". Machine will be modernized with new controller, probe head, probes from Renishaw, PC and 3D software RationalDMIS. Itjdpfx Aboxzp U Denok Technical Data: Measuring Range apprx: X = 1.000 mm - Y = 1.200 mm - Z = 600 mm Accurracy: MPEE : 1.9+L/300 according the manufacturers specification Illustrations still with original probe configuration Price on request >>> single machine - as long as available

Condition: like new (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, Including control panel, control PC, and software as shown in the pictures. EXW – self-collection on site. The purchasing company must sign a sales contract and disclose/confirm its beneficial owners. Furthermore, the signatory must complete a Postident identification. Itsdoyam S Sopfx Abnek

Condition: excellent (used), Technical Specifications Manufacturer: ZEISS Type: Contura G2 Technical specifications available upon request Isdpfeh R Nchsx Abnjtk The machine can be upgraded with new accessories according to customer requirements. Price: available upon request! Installation and commissioning possible! We would be happy to prepare a detailed offer for you. Note: Our offer is exclusively for specialist customers. (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)

Condition: used, Year of construction: 2014, Measuring machine Zeiss CMM Pro T2 advance 16/21, year of manufacture 2014 – in very good condition • Standard numerical control panel • Base plate dimensions: Length: 4,000 mm Itjdpfx Abjw D R Nqsnjk Width: 2,000 mm Height: 640 mm Total system height approx. 4,500 mm • Measuring range: X-axis: 3,200 mm Y-axis: 1,600 mm Z-axis: 2,100 mm • Permissible workpiece weight: approx. 5,000 kg Software: Zeiss Caligo BASIS CNC, Zeiss Caligo QS-STAT • Length measurement deviation according to ISO 10360-2: MPE-E = (27 + L/80)μm

Condition: used, Year of construction: 2005, Large ZEISS PRO T SELECT Coordinate Measuring Machine (CMM) available for immediate sale. The machine was previously installed in a professional metrology laboratory and has been professionally decommissioned. It is stored indoors and is ready for shipment. Technical specifications: * Manufacturer: ZEISS * Model: PRO T SELECT * Year of manufacture: 2005 * Serial number: 131860 * Steel measuring table: 4000 × 3000 mm * Probe system: Renishaw RDS-CAA indexing probe head * Calibration according to DIN EN ISO 10360 * Latest ZEISS calibration performed in 2025 (documentation available) * Complete machine * Indoor storage * Ready for immediate loading and worldwide shipment Included: * Complete ZEISS PRO T measuring machine * Renishaw RDS-CAA probe head * ZEISS calibration documentation (2025) * Available technical documentation (upon request) Isdpfx Abezga D Honstk Additional information: The machine is available for inspection by appointment.

Condition: good (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: lighting, type plate available, Year of manufacture: 2012 Tactile: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C 1.7 + L/250 Iedpjuq Nfhjfx Abnotk E0 (3D) in [μm] at 20 ±2 °C 1.9 + L/250 Scanning probing deviation MPE according to ISO 10360-4:2000 THP at 2.7 [μm] Single probe probing deviation form MPE according to ISO 10360-5:2010 PFTU 1.9 [μm] Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 Probe deviation MPE according to ISO 10360-7:2011 PF2D 5) 1.7 [μm] Probe deviation of the image processing system MPE according to ISO 10360-7:2011 PFV2D 5) 1.2 [μm] Possible services: delivery, commissioning

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200008301032, measuring range X-axis: 400 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 350 mm, table width: 680 mm, table length: 855 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Measuring range, X-axis: 400 mm Measuring range, Y-axis: 500 mm Measuring range, Z-axis: 350 mm Maximum workpiece weight: 280 kg Itsdpfjzu Ixujx Abnok Table width: 680 mm Table length: 855 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,100 x 1,100 mm Total weight: 500 kg

Condition: ready for operation (used), Zeiss 608093 9203 ÄZ02 35/05 Path measurement 32 Prismo / Wegmessung 32 Prismo-ST 608093-9203-701, used, as good as new condition, 100% functional Ijdozu Hzbepfx Abnotk

Condition: used, Year of construction: 2006, Contura Matic T2 contour measuring machine, manufactured in 2006. Iedpezu At Hefx Abnjtk

Condition: used, Year of construction: 2006, X-axis: 1600mm, y-axis: 1800mm, z-axis: 1000mm, max. workpiece weight: 3.5t, noise level: less than 70dBA, compressed air connection: 6-8bar, connected load: 2500VA, control: CALYPSO 7.6.08 software, length: 2940mm, width: 2450mm, height: 3800mm, weight: 8.5t, operating hours: 38,996h, with documentation. An on-site inspection is possible. Itjdpfx Ajzuz Aaebnok

Condition: used, Year of construction: 2000, length 2750 mm width 1400 mm height 340 mm total power requirement 0 kW weight of the machine ca. 3 t Itjdpoznnd Rsfx Abnek dimensions of the machine ca. 2750 x 1400 x 340 mm Marble table as a surface plate. It was the bottom part of a Zeiss measuring machine. Size is 2750 x 1400 x 340 mm.

Year of construction: 2020, condition: ready for operation (used), A handheld pulse laser cleaning machine is available. Laser source: Raycus RFL-P200, laser power: 200W, cooling medium: water, frequency: 50kHz, max. speed: 10m/s, max. cleaning width: 50mm. The machine is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Iedpfx Aezfaaxobnotk

Condition: ready for operation (used), Year of construction: 1986, Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement. Ijdpfx Ajy T N H Tjbnstk

Condition: ready for operation (used), Year of construction: 1996, Measuring range X/Y/Z: 700mm/700mm/500mm, probe ball diameter: 7.9942mm, control: Zeiss C90, touch probe: PH6/TP6, max. measuring deviation: 3.6+L/250µm, max. angle error: 0.22°, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Isdpswzldwjfx Abnetk

Condition: ready for operation (used), Design: gantry design, measuring range X/Y/Z: 850mm/1200mm/600mm, measuring accuracy: 2.5µm/L250, repeatability: +/-3µm, machine weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Ijdpfjy Hk Ufex Abnotk