Used York Hw 3B2/C1 for sale (3,663)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, type of cooling: water, input voltage: 400 V, Equipment: cooling unit, type plate available, This single-stage absorption chiller is in perfect condition and ready for operation. It runs on hot water and uses Advaguard as the working fluid. Available in two configurations: with the installation container or without it. Godpfx Asytyiwekyskc Power: 1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C Year of Manufacture: 2008 Frequency: 50 Hz Voltage: 400 V Working Fluid: Advaguard

Condition: used, machine/vehicle number: 90540056, Year of construction: 2017, operating hours: 788 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 2,500 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 150 Ah Battery type: 2 PzB Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,720 mm Own weight: 800 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 788 h EQUIPMENT Formerly a Jungheinrich full-service unit All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. Gkedpfx Aksz Iw A Heyjc If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 446

Condition: ready for operation (used), Trumpf 1488573 control SW V 6.2 / HW Index C1 SN:00569, used, normal signs of use, 100% functional, scope of delivery as per photos Gksdpfx Aez Adbujkysc

Condition: used, functionality: fully functional, For sale: Softing CAN-AC1-PCI/HW V1.01 CAN interface PCI card with original software CD, in fully working condition. Manufacturer: Softing Model: CAN-AC1-PCI/HW V1.01 Serial Number: 140637087F Condition: Used – Fully Tested and Working Interface: PCI Channels: 1x CAN Protocols: Layer 2, CANopen-OPC, DN-OPC, CANAnalyzer, CANopen, DeviceNet Connector: 9-pin D-Sub Gedpszq Al Uofx Akyjkc Includes: Original software/driver CD Fully tested and operational. Ideal for industrial automation, CAN bus monitoring, and CANopen and DeviceNet applications. Removed from a working industrial environment, no faults found. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection.

Year of construction: 2011, operating hours: 6,967 h, condition: used, functionality: fully functional, 1 York, Johnson Controls, water chiller, model: YLAA0390HE, 390 kW (335,400 frigories), R-410 gas, 5 scroll compressors, tubular heat exchanger, Dimensions: 3690 x 2242 x 2393 mm high, Weight: 2805 kg, with 6 axial fans. Equipment tested and guaranteed in Spain. Gkodpewg Hnnsfx Akyjc

Condition: used, Year of construction: 2019, Complete system for sale: 1 York chiller and one Jäggi cooling unit. Gkedpfx Aksv Npgmoyjc

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 23130745, total length: 3,500 mm, total width: 1,550 mm, total height: 2,570 mm, power: 1,351 kW (1,836.85 HP), fuel type: electric, volume flow: 2,239 m³/h, pressure (max.): 28 bar, Used Frick / York SGC 2313 - Sabroe SAB 233 S screw compressor skid for R717 (ammonia). Complete with a Schorch DQ7250S-PB83P-Z electric motor – 60 Hz – 110 kW – 3550 rpm with additional cooling, Sabroe OHU 07629 oil separator with a capacity of 1371 liters, Sabroe OF 2111 oil filter, Vahterus PSHE 3HH-66/2/1 Q-plate oil cooler, oil pump, and a Unisab 3 controller. The compressor has a displacement of 2239 m³/h. Capacity: 1351 kW at -6.7 °C/+35 °C. Gjdpfexyk Enjx Akyokc

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 65 kW (88.38 HP), type of input current: three-phase, type of cooling: water, overall weight: 750 kg, ambient temperature (max.): -5 °C, ambient temperature (min.): 43 °C, input voltage: 400 V, pressure: 10 bar, temperature: -8 °C, volume flow: 17.17 m³/h, pump pressure: 10 bar, total width: 1,110 mm, total length: 2,110 mm, total height: 1,750 mm, power: 6 kW (8.16 HP), York International 65kW Chiller. Purchased in 2023 - unused since date but in good physical and mechanical condition. Gkjdpfx Aszi S Dkjkyjc Requires Glycol / Brine / Water reservoir.

Condition: good (used), Year of construction: 2008, functionality: fully functional, spindle bore: 56 mm, turning length: 1,310 mm, feed length X-axis: 280 mm, feed length Z-axis: 1,310 mm, For sale is a Richyoung RIC-TC1860 cycle-controlled lathe with an 8-station tool changer and Sauter body. This special price is valid for pickup by March 28, 2025. The machine is in very good condition and fully functional. Only one-off orders have been processed on it. The machine has been regularly cleaned and well maintained. Technical Specifications: Year of Manufacture: 2008 Control: Fagor Bed Suspension: 460 mm Swing Diameter over Cross Slide: 230 mm Center Distance: 1,500 mm Spindle Nose: D1-6 Spindle Bore: Ø 56 mm Spindle Speed: Max. 3,100 rpm X-Axis Travel: 280 mm Z-Axis Travel: 1,310 mm Spindle Motor: 5.5 kW Tool Changer: Sauter Tool Positions: 8 Tool Holder: VDI 30 Included: Chip tray, tool changer, 3-jaw chuck including 4 * 3 interchangeable jaws, live center Also Available: 2* collets, tool holder including collets, various centering centers 4* various 3-jaw chucks, various Interchangeable jaws for chucks, 8 * boring bar holders, 10 * radial tool holders on the right, 3 * drill chucks, soft boring jaws Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase / Sale Gkjdpfxjv Tc Dtj Akysc PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website

Year of construction: 2017, condition: excellent (used), REF: MM6476 Gkedozrg T Eepfx Akysc 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: good (used), Year of construction: 2002, overall weight: 3,200 kg, Krauss Maffei 80-220 C1 injection molding machine 80 tons Year 2002 Gkodpfsz Dquzjx Akyec

Condition: excellent (used), functionality: fully functional, Sabroe / York / Stal Ammonia Refrigeration Plant (NH3) General specifications of the set: Main brands: Sabroe, York, Stal, Arctos Refrigerant: R717 / NH3 (Ammonia) Description: Complete, high-capacity industrial refrigeration installation, comprised of multiple integrated modules. The complete line includes: 1. Screw Compressors: - Sabroe SAB 83 (2004): Volumetric capacity 1603 m³/h, rotational speed 3600 rpm, dimensions: 3900 x 1250 x 2150 mm. - York Refrigeration SAB 83 (2001): Volumetric capacity 1331 m³/h, speed 2950 rpm, dimensions: 3150 x 1300 x 1600 mm. Set includes a pressure vessel 675 l (800 x 800 x 2150 mm). - ABB Stal Refrigeration S26B (1994): Dimensions 1550 x 1450 x 2400 mm. - Stal Refrigeration AB SVA26E (1991): Compressor type S26A-25, capacity 700 m³/h, dimensions: 1600 x 1000 x 2420 mm. 2. Separator Vessels and Pumping Stations: - Stal-Astra NH3 Separator (1991): Insulated, capacity 4300 l, dimensions: 4100 x 1400 x 1400 mm, equipped with ammonia pumps. - Stal-Astra NH3 Separator (1991): Insulated, capacity 3000 l, dimensions: 4100 x 1100 x 1100 mm, equipped with ammonia pumps. 3. Auxiliary Equipment and Control Systems: - Arctos ARLEX ND Degasser (2018): Modern module supporting the efficiency and safety of R717 operation, dimensions: 570 x 400 x 1100 mm. Gkodpjyp H Tzefx Akysc - Main Control Cabinet: Extended central unit, length 4.8 m, equipped with modern Siemens touchscreen HMI, dimensions: 4800 x 630 x 2200 mm. - Rittal Control Cabinet: Equipped with a WEG frequency inverter, dimensions: 1000 x 600 x 2280 mm. This high-capacity refrigeration installation combines proven, high-performance screw compressors from leading manufacturers. The inclusion of large, insulated separator tanks with integrated pumps guarantees adequate power reserve and operational stability for ammonia cycles. Despite the varying ages of individual components (1991–2018), the system operates as an integrated whole, managed by an advanced central unit featuring solutions from Siemens and WEG.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 180 kW (244.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 950 kg, input voltage: 400 V, total width: 800 mm, total length: 1,250 mm, total height: 1,680 mm, warranty duration: 6 months, Watercooled chiller York YCSE0181 180 kW Cooling capacity: 180 kW / 51.18 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Compressors: 1 pcs. Hitachi G50ASF-Z (screw) Type of refrigerant: R134A Dimensions: 1.25x0.8x1.68 m. Weight: 950 kg. Gkodpownrk Refx Akyjc Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2017, functionality: fully functional, cooling capacity: 145 kW (197.14 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,535 kg, input voltage: 400 V, total width: 1,100 mm, total length: 3,800 mm, total height: 2,300 mm, warranty duration: 6 months, heating capacity: 150 kW (203.94 HP), Aircooled chiller/Heat pump YORK YLHA 150 TP 380T 145 kW / 150 kW Cooling capacity: 145 kW / 41.23 tons (12/7 — 35°C) Heating capacity: 150 kW / 42.65 tons (40/45 —7°C) Year of manufacture: 2017 Options: Heat pump. Hydraulic module Gkjdpfxoykqv Nj Akysc Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 3 pcs. Copeland ZP182KCE-TFD-455 (scroll) + 1 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. (frequency inverter) Hydraulic module: 2 pcs. water pump Wilo DPL40/150-3/2-IE2, buffer tank 152 l. Dimensions: 3.8x1.1x2.3 m. Weight: 1535 kg Working hours: 14618 / 19252 / 15204 / 19621 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2025, The YMAE 130 air-water inverter scroll modular heat pump is a compact, reversible heat pump with a heating capacity of 129 kW at 50/55°C and 7°C ambient temperature, and a cooling capacity of 124 kW at 7/12°C and 35°C ambient temperature. The COP is 2.72. Due to its modular design, up to 6 units can be connected together. Refrigerant used: R454B, plate evaporator, without pump. Eligible for BAFA funding. Gkedpjw S Df Tsfx Akyec

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, overall weight: 2,850 kg, Swing over gap: 660 mm Swing over bed: 425 mm Swing over cross slide: 190 mm Max. cutting length: 1500 mm X = 260 mm Z = 1680 mm Rapid traverse: 15 & 15 m/min Spindle bore: Ø46mm Spindle speed: 0-5000 rpm Spindle motor: 7.5/11 Gjdez Rzy Nopfx Akyjkc

Condition: ready for operation (used), Year of construction: 2020, Cooling output: 420kW, connected load: 7.1kVA, weight: 4.9t, with Cooling Tower Baltimore Aircoil International TXV 237R and Desalination Control System Chemie + Wasser Lohbeck DS6, with documentation, an inspection is possible. Gsdpfxju Rn Ago Akyjkc

Condition: used, Year of construction: 1998, operating hours: 93,000 h, functionality: fully functional, machine/vehicle number: 174380, clamping force: 2,000 kN, screw diameter: 60 mm, clearance between the columns: 560 mm, mold height (min.): 1,050 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 222 A, Equipment: documentation/manual, For sale: 200-ton Krauss Maffei injection molding machine. The machine is currently in production and can be inspected while in operation. Gksdpezwwyasfx Akysc Distance between columns (H x V): 560 x 560 mm Platen size: 915 x 915 mm Max. open height: 1050 mm Min. mold height: 350 mm Opening stroke: 700 mm

Condition: good (used), functionality: fully functional, Amada LC 2012 C1 NT / Punch-Laser Machine, Year of manufacture 2012, Control system: AMNG - Fanuc Series, Punching force: 200 kN, Punching area: 2,500 x 1,270 mm, Laser power: 2,500 W, Laser cutting area: 2,000 x 1,270 mm, Z-axis travel: 100 mm, Gkjdpfx Aezp D H Dekysc Max. table load: 150 kg, Revolver turret: 46 stations.

Year of construction: 2025, condition: like new (used), Replacement shafts for Lindner Urraco 75 for sale High-quality replacement shafts for a Lindner Urraco 75 shredder are for sale. – Application: Old wood, household and commercial waste – Condition: New / very good condition Gksdpfx Akjzphiijysc Design: Original Lindner shafts, not replica shafts The shafts are ready for immediate use. The price stated is net. Notes: • Sale is made excluding any warranty or guarantee. • No returns or renegotiations. • Subject to prior sale. All information is without guarantee. The seller assumes no liability for any errors, omissions, or changes to the information. The sale is made exclusively subject to prior sale.

Condition: used, functionality: fully functional, This is a round filter coffee machine, a Bravilor Bonamat B20 HW. This coffee machine is ideally suited for supplying coffee in large establishments during peak hours, such as care facilities, catering businesses, company canteens, etc. The B HW series is equipped with a separate hot water tap. The containers can be easily transported. The unit has undergone a thorough inspection in our in-house workshop and is fully functional. It has only been operated with a water softening system, so there are no limescale deposits in the system. The matching drip tray for dispensing coffee is not shown in the picture, but is also included. The base cabinets shown in the pictures are not included in the offer, but can be purchased as an optional extra. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 standard. Gkjdozxn Aujpfx Akyoc Technical data: W x D x H: approx. 1173 x 600 x 947 mm Model with 1 brewing system and 2 containers Separate hot water tap With sight glass Coffee brewing unit Peak capacity: 40 liters Hourly output: approx. 90 liters Brewing time: approx. 14 min. / 20 liters Hot water unit Peak capacity: 4.6 liters Hourly output: approx. 20 liters Frequency: 50/60 Hz Voltage: 400 V 3 N Connection value: 11.2 kW Further information: 1 brewing column in the center 1 coffee container on the right and left, removable With hot water dispensing: Coffee is kept warm in a container Audible signal at the end of brewing With timer Digital display Total and daily counters Descaling system Stainless steel housing Fixed water connection Condition: Used, thoroughly inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to request a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2006, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 15425021604, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,700 mm, total length: 2,800 mm, total width: 2,800 mm, table length: 1,200 mm, rotational speed (min.): 12,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 16,075 h, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: DC, Equipment: documentation/manual, DMG Deckel Maho DMC 1035 V vertical machining center, year of manufacture 2006 The machine has only processed plastics – in good condition! Year of manufacture: 2006 Machine number: 15425021604 Condition: Good Delivery terms: Free loading onto truck Location: 72178 Waldachtal !!!!!The machine must be collected on 21.10.2026! We can offer transport if required!!!!! Payment terms: Payment in advance – by bank transfer Internal number: 180-1 Can be inspected while powered on: Yes Technical data: - Operating hours (machine on): approx. 39,447 h (will increase slightly) - Spindle hours: 16,075 h (will increase slightly) - Tool holder: SK40 - Max. spindle speed: 12,000 rpm - Tool magazine: 30 positions - Table dimensions: 1200 x 560 mm - Control system: Heidenhain iTNC 530 - Travels X / Y / Z: 1035 / 560 / 510 mm - 400 V / 50 Hz / 35 kVA Scope of delivery: - Manuals and documentation - Wireless measuring probe Heidenhain TS640 - Handwheel - Programmable 4th axis Lehmann - Angle plate - Manual dividing head - Swivel vice Note: The vices on the machine table and the tool holders in the magazine are not included in the scope of delivery! Dimensions & weights: - Installation dimensions L x W x H approx.: 2800 x 2800 x 2700 mm - Weight approx.: 5000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►If required, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with exclusion of all warranties. ►Technical data without guarantee. Gjdpfoz I Dl Ijx Akyskc ►Subject to prior sale. ❗The goods are sold exclusively to businesses❗

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 535.3 kW (727.80 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,297 kg, input voltage: 400 V, total width: 2,160 mm, total length: 6,200 mm, total height: 2,660 mm, warranty duration: 12 months, Aircooled chiller YORK YGT550HE 535.3 KW Cooling capacity: 535.3 kW / 152.2 tons (12/7 — 35°C) Year of manufacture: 2024 Options: Leak detector Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer CSH9663-160Y-40D (screw, inverter) + 1 pcs. Bitzer CSH9663-160Y-40D (screw) Type of refrigerant: R1234ze Number of fans: 10 pcs. (EC-fans) Dimensions: 6.2x2.16x2.66 m. Weight: 6297kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Gedpfx Aey T Hadskyskc Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: like new (used), Year of construction: 2017, A complete welding system based on the KUKA KR 16 L8 arc industrial robot with KRC4 controller and Fronius CMT welding system. The system includes a KUKA KP1 positioner and a wire feeder with cooling. All main components are from 2017. The kit includes a cleaning device and a laser device for automatic torch geometry correction (Rotolab), as well as a Siemens safety PLC. Technical data: Industrial robot: Model: KUKA KR 16 L8 arc HW, Serial No.: 867099, Year of manufacture: 06/2017, Number of axes: 6, Payload: 8 kg, Reach: 2015 mm, Weight: 240 kg Positioner/Rotator: Model: KUKA KP1-HC1000R980, Maximum payload up to 1 t, Serial No.: 152228, Year of manufacture: 06/2017, Weight: 850 kg Gsdpfxsy Hktne Akyokc FRONIUS welding machine: Type: TransPuls Synergic 400 CMT R, Serial No.: 28245623, Output: 400 A, with cooling unit Model: Fronius FK 4000-R FC, Serial No.: 28245627, Power supply: 400 V, Frequency: 50–60 Hz, Current: 0.6 A, Maximum pressure: 4 bar (0.4 MPa), Power: 2 kW, Protection class: IP23 Wire feeder: Model: Fronius VR 7000-CMT 4R/G/W/F++, Serial number: 28245629, Voltage U11: 55 V / 4 A, Voltage U12: 24 V / 2 A, Wire feed speed: 0.5 – 22 m/min, Welding current: – 400 A (100%), Protection class: IP23

Condition: used, Year of construction: 2004, functionality: fully functional, Here are 4 fans with mounting plate and bracket for sale. Gkedpfx Ajk Dz Enokyjc These were installed in a York EC 200HP unit. The price applies per fan.