Used Wpm 400 B for sale (51,661)

Condition: ready for operation (used), A die-cutting and embossing machine Woschnik + Partner is available. Stroke rate: 9000/h, max. sheet dimensions X/Y: 820mm/1130mm, min. sheet dimensions X/Y: 360mm/400mm, gripper margin adjustment: 10mm-17mm, closing frame dimensions X/Y: 820mm/1134mm, max. die-cutting dimensions X/Y: 800mm/1120mm, cutting rule height: 23.8mm, max. punching force: 4000kN. Machine dimensions X/Y/Z: approx. 8000mm/2650mm/2950mm, weight: approx. 30000kg. Documentation available. An on-site inspection is possible. Cedpfx Akeyn Nzfecorb

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Cjdpfxsyuuzde Akcjrb Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes Cjdoy In Avepfx Akcerb

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Credpfsy In Apsx Akcjb Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2500 mm Main saw blade projection: 110 mm No of Rip saw Grippers: 9 No of Cross Cut Grippers: 4 Csdpfx Ajygtbmjkcsrb

Condition: used, machine/vehicle number: 008502, Max. panel width: 3800 mm Max. panel length: 3800 mm Main saw blade projection: 110 mm No of Grippers: 11 Credpfsy Edp Hjx Akcjb

Condition: used, mileage: 463,000 km, power: 294 kW (399.73 HP), first registration: 01/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, loading space length: 6,200 mm, loading space width: 2,450 mm, loading space height: 600 mm, Year of construction: 2010, Equipment: ABS, Volvo FM 400 / 6x4 Tipper 6,20 m + BORDMATIC + CRANE Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2010 ? MILAGE: 463 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ?AIRCONDITION TIPPER: 620 x 245 x 60 cm (L x W x H) Csdpfjxpz Hzex Akcjrb CAPACITY: 12 000 kg TOTAL WEIGHT: 26 000kg TIRE SIZE: 13R22,5 WHEELBASE: 430/140 cm SUSPENSION: SPRING CRANE: HIAB 144B B-3 HIDUO TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 79208

Condition: used, mileage: 463,000 km, power: 294 kW (399.73 HP), first registration: 01/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, loading space length: 6,200 mm, loading space width: 2,450 mm, loading space height: 600 mm, Year of construction: 2010, Equipment: ABS, Volvo FM 400 / 6x4 Tipper 6,20 m + BORDMATIC + CRANE Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2010 ? MILAGE: 463 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ?AIRCONDITION TIPPER: 620 x 245 x 60 cm (L x W x H) CAPACITY: 12 000 kg TOTAL WEIGHT: 26 000kg TIRE SIZE: 13R22,5 WHEELBASE: 430/140 cm SUSPENSION: SPRING CRANE: HIAB 144B B-3 HIDUO TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? Cjdpjxpz Hnsfx Akcorb LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 79208

Condition: used, total width: 1,000 mm, total length: 1,200 mm, total height: 1,300 mm, - Documentation available: No - CE certificate present: No - Main motor power [kW]: 15 - Flow capacity [m³/h]: 12700 - Rotation speed [rpm]: 1450 - Connection diameter [mm]: 400 - Output diameter [mm]: 400 - Transport dimensions: 1200mm x 1000mm x 1300mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Crodpjw Tzg Rofx Akcob Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1988, Double Mitre Saw Düspohl DGK 400 B Stock number: 001071 Double Mitre Saw Düspohl Type: DGV 400 B Year of manufacture: 1988 Swivelling saw blades Max. cutting length: 2500 mm Approx. cutting height: 70 mm Max. saw blade diameter: approx. 300 mm Was used for door frames Motor power: 4 kW Crjdpfx Asyv R Nzjkcjb Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Cutting range round/square: 190/190 x 190 mm Cutting range at 45° mitre round/rectangular: 140/190 x 140 mm Saw blade dimensions: 400 x 32 x 1.5 mm Crjdoyvfp Iopfx Akcjb 1 stroke speed: 85/min Drive motor: 380 V, 0.37 kW Weight: 126 kg Required space: 1200 x 600 x 980 mm

Condition: new, Year of construction: 2025, machine/vehicle number: 0023, functionality: fully functional, operating hours: 0 h, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 1,200 m³/h, intake vacuum (max.): 26 mbar, noise level: 85 dB, actuation type: electric, total height: 2,300 mm, total length: 3,000 mm, total width: 1,000 mm, overall weight: 650 kg, Equipment: CE marking, documentation/manual, Hello, I have a brand new, unused extraction unit for sale, which was purchased together with a five-axis machining center. I am selling it because I have installed a central extraction system for the machine, and this unit is not needed at the moment. Credpfx Asyl Ncwokceb

Condition: new, bore capacity in steel (diameter) 32,0 mm throat 255 mm bore stroke 120 mm morse taper 4 MK table: 385 x 335 mm turning speeds 80 - 2130 U/min total power requirement 1,1 / 2,2 kW weight 125 kg range L-W-H 460 x 900 x 1730 mm Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill Codpfxjxaaqgs Akcorb - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyless chuck 1 - 16 mm / B 18 - Cam switch for right-left rotation - Cross line laser device - T-nuts - Height-adjustable protective cover

Condition: good (used), Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons -Tensioning bracket: Fork clamping iron, beveled -Type: DIN 6315 B 40 x 400 -Slot width: 40 mm -Dimensions: 405/100/H60 mm -Weight: 10.9 kg Csdpfokkzyfox Akcjrb

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min Crjdpjx Aqdcsfx Akceb No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x600x500 mm Weight 60 kg Total power requirement 0,25 kw Credpfevz Hghex Akcsb

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Crsdpfx Aewhvrrjkcob Year of manufacture according to seller: 2022 Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor. Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available.

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, I am selling a tetno machine, connected, can be tested. Nominal force: 4000 kN Ram stroke: 1000 mm Passage between columns: 3100 mm Table clamping area: 3100 x 6000 mm Electric motor power: 15 kW Machine dimensions lxwxh: 6000 x 4150 x 4170 mm Press weight: 43800 kg Can send a video of the machine, via whatsapp application Credjxwlvpjpfx Akceb

Condition: repair required (used), Year of construction: 2010, functionality: not functional, Used food waste disposer, in need of repair. Credpfxoxw S Ths Akcsb

Condition: excellent (used), Year of construction: 2005, For sale is a fully functional and very well-maintained dual-fuel burner from Weishaupt, including gas train (Dungs DN 65) 1. Burner type: Weishaupt RGL50/1-B Output: 600–5400 kW Version: ZM-NR Year of manufacture: 2005 For sale is a fully functional and very well-maintained dual-fuel burner from Weishaupt, including gas train (Dungs DN 65) Crsdpfx Akswgbpajcsb 2. Burner type: Weishaupt RGL50/1-B Output: 600–5400 kW Version: ZM-NR Year of manufacture: 2013

Condition: new, New motor from renowned German manufacturer Baumüller Nürnberg. The motor is unused, warehouse stock (old stock). No signs of operation. Technical data – from nameplate: Crjdpfxeyga Uge Akcob • Manufacturer: Baumüller Nürnberg GmbH • Type: GNA 132 MV • Supply voltage: 400 V • Current: 39 A • Power: 12 kW • Rotational speed: 1260–4000 rpm • Excitation voltage: 310–365 V • Excitation current: 0.17–0.38 A • Insulation class: F • Protection class: IP23 • Standard: VDE 0530 • Serial number: 88104349 The motor is intended for automation, CNC, special machine applications, and as a spare part for existing Baumüller drive systems. Price quoted per unit.

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc Cjdpfsuayy Tjx Akcerb T1SP 300x145x160 M 2,5 EW20° 3GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: used, We are offering used shelving units for sale. TECHNICAL DATA Manufacturer: FX Rauscher Model: P30 Condition: used Frame height: approx. 2,500 mm Crjdey Hqt Iopfx Akcjb Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 Boltless assembly Usage: single-sided Material: galvanized steel PRICE €1,216.25 net (5 starter bays + 20 add-on bays) €1,447.34 gross incl. VAT Tiered pricing Starter bays: 1 - 5 units: €70.00 net 6 - 20 units: €66.63 net 21 - 50 units: €63.25 net from 51 units: €59.88 net Add-on bays: 1 - 5 units: €50.00 net 6 - 20 units: €47.50 net 21 - 50 units: €45.00 net from 51 units: €42.50 net Large quantities available directly from stock. YOUR CONTACT PERSONS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an additional charge, depending on the destination and the size of the shipment. Please contact us for a customized quote. PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms will be agreed upon in case of an order. The price is the unit/net price unless otherwise stated in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanines, textile storage systems, as well as machinery for commerce, industry, and trades. We continuously offer attractive second-hand equipment from various manufacturers and brands at competitive conditions. If you have any questions, please feel free to contact us. ‘Four wins’—the four success factors from DLK: Storage Technology | Levelmaker® | Logistics | Solutions

Condition: used, We offer used shelving racks here. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: used Frame height: approx. 2,500 mm Shelf size: 1,220 x 400 x 33 mm Compartment load capacity: 100 kg Number of levels: 6 pcs Boltless assembly Use: single-sided Material: galvanized steel PRICE €85.20 net (1 starter bay) €101.39 gross, incl. VAT Quantity discounts Starter bays: 1 - 5 units: €70.00 net each 6 - 20 units: €66.63 net each 21 - 50 units: €63.25 net each Crsdpfxsy Hqtnj Akcob from 51 units: €59.88 net each Add-on bays: 1 - 5 units: €50.00 net each 6 - 20 units: €47.50 net each 21 - 50 units: €45.00 net each from 51 units: €42.50 net each Large quantities available directly from stock. YOUR DIRECT CONTACTS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly. This item is available for collection. Delivery or shipping can be arranged at an additional charge. The extra costs depend on the delivery location and order volume and can be quoted individually on request. PROJECT PLANNING Our sales team will gladly prepare a non-binding, tailored quotation according to your specifications. PAYMENT TERMS Payment terms are to be agreed upon at the time of order. The price is per unit/net price as described above (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn trades in new and used products from the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for trade, industry, and craft sectors. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please do not hesitate to contact us with your questions. Vier gewinnt – The Four Success Building Blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, We are offering used shelving systems for sale here. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: Used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 pcs Boltless assembly Usage: single-sided Material: Galvanized steel PRICE €270.00 net (1 starter bay + 4 add-on bays) €321.30 gross incl. VAT Tiered pricing Starter bays: 1 - 5 pcs: €70.00 net each 6 - 20 pcs: €66.63 net each 21 - 50 pcs: €63.25 net each from 51 pcs: €59.88 net each Add-on bays: 1 - 5 pcs: €50.00 net each 6 - 20 pcs: €47.50 net each 21 - 50 pcs: €45.00 net each from 51 pcs: €42.50 net each Large quantities available ex-stock. YOUR CONTACT PERSONS: Codey Hqr Repfx Akcorb Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly. This item is available for collection. Delivery or shipping is available at an additional charge. Additional costs depend on the delivery location and shipment size and can be provided upon request. PROJECT PLANNING Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly. PAYMENT TERMS Payment terms are to be agreed upon order placement. Prices are quoted per item/net price or as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT. ABOUT US DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine platforms, textile storage, as well as machinery for trade, industry, and crafts. We regularly offer attractive used equipment from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us. Four wins – The success modules of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions