Used Wmw Rt 450 for sale (11,000)

Condition: used, Technical details: table diameter: 450 mm table height: 160 mm rotation movement: 360 Grad passage: 40 mm weight of the machine approx.: 150 kg space requirements of the machine approx.: 650x600x170 mm basis stand area: 620x420mm T-slots : according to DIN 650 und 508 T-slots 8x radial, 4x163mm length and 4 x 135mm length - a=12mm - h=19mm - b=21mm - c=9mm Nlsdeu Nkncjpfx Ag Ioh *

Condition: used, Technical details: Nlsdpfsu N D Aysx Ag Ijh table diameter: 450 mm rotatability of the table - manual/mechanic: 360 ° clamping table - swivable: 90° mechanisch Grad weight of the machine approx.: 100 kg dimensions: L: 800 x B: 700 x H: 400 mm The surface of the round table is scraped. Very good condition! micrometer precise locking Positioning in the 0.01 mm range T-slots according to DIN 650 radial Foot clamping 16mm (6 holes) *

Condition: used, Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Nljdpfx Aez Nxltjg Ieh Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth: 2500 mm Total height: 2600 mm Weight: 4,5 T

Condition: excellent (used), Year of construction: 2008, For sale: Heckert FSS 450R vertical milling machine. Work surface of the table [mm]: 400 x 1600 Maximum weight of workpiece [kg]: 1500 Longitudinal travel of the table [mm]: 1120 Travel of the cross slide [mm]: 345 Vertical travel of the ram [mm]: 400 Spindle drive power [kW]: 11 Spindle taper: ISO 50 Accelerated longitudinal and transverse travel [mm]: 3150 Accelerated vertical travel [mm/min]: 1000 Weight [kg]: 4000 Overall machine dimensions [mm]: 2850 x 2150 x 2350 Nljdpfx Aozxzdxeg Ish

Year of construction: 1965, condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Njdpfx Agjvy E A Ss Islh

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,600 mm, feed length W-axis: 900 mm, workpiece weight (max.): 12,000 kg, overall weight: 30,000 kg, year of last overhaul: 2020, For Sale – Used CNC Horizontal Boring Machine UNION BFKR 150 CNC Control: HEIDENHAIN TNC 530 CNC Retrofit: The machine was retrofitted with CNC control in 2020. Technical Specifications: X-axis travel: 3,000 mm Y-axis travel: 1,600 mm Z-axis travel: 1,600 mm Njdpfx Agj Afm Uyo Ijlh W-axis travel: 900 mm (spindle travel) Spindle diameter: Ø 150 mm B-axis: 360° – CNC-controlled rotary table Table dimensions: 1,600 × 2,000 mm Machine Condition: The machine is currently still connected to the power supply and is available for inspection and a test run. The machine underwent a mechanical overhaul approximately three years ago, including the replacement of bearings and other components. The machine has been out of operation for approximately six months.

Condition: used, Year of construction: 1980, Technical details: rpm spindle (continous): 2000 - 2500 U/min double strokes/min.: 25; 37; 50; 75; 100 H/min. Nlsdpfxeu Ng I Ee Ag Ijh Grinding-wheel diameter: Ø 250 mm work height max.: 1350 mm total power requirement: 2,7 kW weight of the machine ca.: 1,0 t dimension machine xH: 0,85 x 1,0 x 1,8 m Use for medium to larger metal circular saws from 250 - 1450mm. Saw blade attachment Ø 60 to Ø 80mm and shaft Ø 31,5mm Tooth pitch up to 42mm Tooth depth adjustment via scale Front cutting tooth: can be chamfered on both sides up to 45° and overcut at pitch 0.02mm *

Year of construction: 1994, condition: ready for operation (used), A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Nljdpfx Agov Exths Ieh

Condition: excellent (used), Year of construction: 2011, operating hours: 39,090 h, functionality: fully functional, machine/vehicle number: 14390, travel distance X-axis: 1,350 mm, travel distance Y-axis: 970 mm, travel distance Z-axis: 1,300 mm, total height: 4,150 mm, total length: 8,500 mm, total width: 5,500 mm, overall weight: 32,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, operating hours of spindle: 8,407 h, coolant supply: 80 bar, spindle motor power: 30,000 W, spindle nose: HSK-A100, number of slots in tool magazine: 60, Equipment: chip conveyor, Travel distances Travel distance X: 1350 mm Travel distance Y: 970 mm Travel distance Z: 1300 mm with measuring system from Haidenhain Pallet size: 800 x 1000 mm Table load: 2000 kg Horizontal/vertical milling table Working spindle Diameter at the front bearing: 110 mm Drive power: (60% duty cycle) 30 kW Drive power: (100% duty cycle) 29 kW Torque: (60% duty cycle) 1088 Nm Torque: (100% duty cycle) 985 Nm Spindle speed: 20…6000 rpm Spindle taper: HSK-A100 NC rotary table with 500 rpm Table speed for positioning operation up to 60 rpm Table speed for turning operation up to 500 rpm Operation at 100% duty cycle with speed >200 rpm max. 20 min Workpiece diameter incl. fixture 1400 mm Workpiece height: 1400 mm Workpiece weight incl. fixture up to 60 rpm 2000 kg Workpiece weight incl. fixture above 60 rpm 1200 kg Tangential moment 10000 Nm Tilting moment 20000 Nm Drive power (100% duty cycle) 57 kW Drive torque (100% duty cycle) 2520 Nm Machine is equipped with automatic imbalance detection Tool changer: 60 positions Max. tool diameter: 325 mm Max. tool length: 450 mm Max. tool weight: 35 kg Internal coolant supply through the spindle center up to max. 80 bar Additionally: - Coolant gravity band filter from Knoll - Chip conveyor Knoll - HYFRA industrial cooling system - 1x special pallet for turning with 4 jaw chucks 50-2 D1000mm - 1x exchange pallet with T-slots 800x1000mm - 3x exchange pallet with threaded holes DIN55201 800x1000mm - Pallets without workpiece clamping devices - Electronic handwheel - Optical measuring probe OMP60 from Renishaw Net machine weight with H/V table approx. 32500 kg Space requirement approx. (L x W x H) 8500x5500x4150mm Nledpfjz Nc Eijx Ag Ieh Technical data without guarantee. Errors and prior sale reserved.

Condition: good (used), Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm Nledpfx Aoha Hvvsg Ish -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Year of construction: 2015, condition: ready for operation (used), A surface roller coating machine Trivec including a custom-built distributing unit with 6 units for oil and varnish application is available. Working width coating machine/distributing unit: 450mm/350mm, coating and metering stations: 2, feed rate: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/700mm/1650mm. An on-site inspection is possible. Njdpfjynltdex Ag Ijlh

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, bale length: 2,330 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec Nedj Afxciopfx Ag Ijlh - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 1986, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: grindable diameter within the workpiece guard: internal: 20..400 mm; Njdpfx Ae Afxqvjg Ielh external: 500 mm max. workpiece diameter within the workpiece guard: 500 mm max. grinding depth: 315 mm grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding unit: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Nodpj Afva Ssfx Ag Ielh Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, straightening roller diameter: 290 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Nljdpfe Afxb Esx Ag Ijh Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Nlodps Afvbpefx Ag Ioh Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Nedpfexddamex Ag Ielh

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: a=10; h=18; b=18; c=8mm Features: Two-way digital ACU-RIDE display Nledpfxov A S Efo Ag Ish *

Year of construction: 2016, condition: ready for operation (used), number of axes: 3, This 3-axis OGP SmartScope Vantage 450 was manufactured in 2016. It features a travel range of 450 x 450 x 250 mm and is equipped with a Renishaw SP25M Scanning Probe Kit and Telestar Plus TTL-Laser-Sensor. The machine includes a 24" LCD monitor and various accessories for enhanced functionality. If you are looking to get high-quality optical measurement capabilities, consider the OGP SmartScope Vantage 450 machine we have for sale. Contact us for further details. • Travel (X/Y/Z): 450 x 450 x 250 mm • Software: MeasureMind 3D Multisensor; ZONE3 (CAD-based) • Probing system: Renishaw SP25M scanning probe kit • Sensor: Telestar Plus TTL laser sensor • Power: 230 VAC, 50/60 Hz, 4.0 A • Operating system: Windows 7 (eligible for Windows 10 upgrade) Additional equipment • 24" LCD monitors (x4) • Scanning probe adapter Nljdpfx Agey Ry Iis Ieh • Sonic SD electronics • Kinematics for probe changer rack • Laser calibration artifact • Offline PC (ZONE3) • Standard desk (1000 x 800 x 750 mm) • Dust cover

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Nlodpfx Agozww R Ss Ieh

Condition: good (used), functionality: fully functional, Year of construction: 2016, overall weight: 600 kg, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, Stratasys Fortus 450mc for sale, Contruction year 2016, low operating hours The Stratasys Fortus 450mc is an industrial-grade FDM (Fused Deposition Modeling) 3D printer, widely used in aerospace, automotive, and medical device manufacturing for functional prototypes and end-use production parts. This unit has been operated in a professional production environment and is fully functional. Technical Specifications: Build envelope: 406 x 355 x 406 mm (16" x 14" x 16") Technology: FDM (Fused Deposition Modeling) Layer thicknesses: 0.005"(0,127mm) / 0.007"(0,178mm) / 0.010"(0,254mm) / 0.013"(0,33mm) Number of material bays: 4 - 2 model + 2 support Machine weight: approx. 600 kg Machine running on external Air pressure, to reduce machine noice. Internal air compressor can be purchased and installed. Materials/Licenses: ABS, ASA, PC, PC-ISO, PC-ABS, Nylon12, ULTEM9085, ULTEM1010, Antero. Included: - Fortus450mc + EU Transformer. - Support Removal Wash Unit (German Sonic Cleanstation UW90) Nlodpfxsznl N Ro Ag Ieh Machine located in Roskilde, Denmark

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 500 mm, operating speed: 400 mm/s, reverse speed: 450 mm/s, table width: 1,250 mm, table length: 630 mm, table height: 860 mm, throat depth: 360 mm, ram plate width: 850 mm, ram plate length: 450 mm, distance table to ram: 800 mm, retraction force: 1.6 t, total length: 2,300 mm, total width: 1,865 mm, total height: 3,650 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic C-frame press ZEULENRODA | 100t | Retrofit system from 2026 with CE conformity + manufacturer's warranty --3 units available | short delivery time-- HIGHLIGHTS - Press frame in steel welded construction for maximum stability and rigidity - Press force 1,000 kN | adjustable based on stroke and pressure - Clamping area, table 1250 x 630 mm - Ram stroke 500 mm - infinitely adjustable - Ram plate with anti-rotation protection and guided by columns - Rapid traverse and short stroke function - Active oil cooling - Hydraulic ball-type quick-release couplings for safe and fast tool changes - Protection on the operator side via light curtain, on the side and rear via safety guard - SIEMENS control + touch panel - Interface for automation - Comfortable operation with BWS-1 cycle + BWS-2 cycle - Remote maintenance - CE conformity + manufacturer's warranty Ram column guidance: - Two diagonally arranged guide columns each. They also serve to prevent the ram plate from twisting. Hydraulic equipment: - Oil tank, hydraulic control / pump completely installed and ready for operation with all required pipelines, pumps and valves as well as the control units. - Electronic stroke measurement system - Stroke control: stroke-dependent - pressure-dependent - stroke-pressure-dependent - Option for setting a press time of 0 ... 10 minutes Safety: - BWS / light curtain on the operator side - Transparent protective elements on the sides, movable - Retraction lock (interlock) - Hydraulic and electrical safety devices in accordance with DIN EN 16092-3 Control / Operation: - SIEMENS - Touch panel control unit as a lift console (height adjustable) - Standing two-hand control unit - 100 storable tool data sets - Transfer of stroke parameters using the teach-in method - Various password levels - ... Operating modes of the press - Off - Setup / Two-hand - Single stroke / Two-hand Nlsdpjz Hcz Sofx Ag Ijh - Single stroke BWS 1 cycle / 2 cycle - Master / Combined operation / Automation Tool control / protection - 6 x tool cams (24V / 2A outputs), freely programmable - Electronic tool protection with 8 inputs, freely configurable Remote maintenance (eWON Cosy) Service & Support ZEULENRODA PRESSTECHNIK

Condition: used, Offered is a CNC knee-type milling machine, model FU 400 × 1600. Clamping surface: milling table with T-slots. CNC control: VEB Numerik CNC-H 646. Equipped with a machine vise, flexible coolant hose and swiveling CNC control panel. Inspection possible by arrangement. Nodpfxs Afpkws Ag Ijlh

Condition: used, Year of construction: 2010, x-travel 450 mm y-travel 400 mm z-travel 320 mm tool taper HSK 63 spindle turning speed range U/min rapid traverse 30 m/min control GE FANUC Series 16 i System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with Nledpfx Agjtqqqmo Ioh 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, travel paths module 3: X3 / Y3 / Z3 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø, (B-axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device

Condition: good (used), Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch stamp -Manufacturer: WMW Smalcalda, shearing tool for square/round steel -Item No.: 5450 9/83 -Shearing tool for round steel: 25/40/55 mm Nlodpex I A Rzsfx Ag Ioh -Type: 4412151064 -Square steel: 34 x 34 mm -Round steel: Ø 19/29/37 mm -Number: 3x shearing tools available -Price: per piece -Dimensions: 200/160/H18 mm -Weight: 3.9 kg