Used Wmw Modul Zfwz 2000/3 for sale (69,839)

Condition: repair required (used), Year of construction: 1987, functionality: unexamined, Max. diameter with counter support: 1450 mm Max. diameter without counter support: 2100 mm Diameter of the clamping table: 1800 mm Predjz Df A Tepfx Af Ssb Total weight: 38 tons The clamping table has been disassembled and overhauled.

Condition: excellent (used), Year of construction: 1978, Gear hobbing machine WMW MODUL ZFWZ 2000/3 Max. diameter with tailstock: 1450mm Max. diameter without tailstock: 2100mm Prsdpfx Afezt Iu Ts Sob Max. module: 30

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec Pedpsz Hcbrefx Af Serb - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: ready for operation (used), Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible. Pjdpfx Afoy Hk T Ie Ssrb

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Pjdpfoxln Iwex Af Ssrb Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x310x245 cm weight of the machine ca. 5,0 t Specifications: - Maximum wheel diameter: 400 mm - Min. module: 1 - Max. module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter strut: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. tooth helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Axial feed continuously adjustable: 0.2-10 mm/rev - Tangential feed continuously adjustable: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min Prjdpfx Afeu A I Elo Ssb - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Gewicht - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (normal) 2950 mm with DC drive 3350 mm - Width: 3100 mm - Height Machine: 1980 mm Electrical cabinet approx.: 2200 mm Machine with DC drive approx.: 2150 mm

Year of construction: 1983, condition: ready for operation (used), Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible. Predpju Av E Hsfx Af Ssb

Condition: excellent (used), functionality: fully functional, I would be happy to insert the technical data into the document for you. Gear Hobbing Machine WMW MODUL ZFWZ 500 x 5 conventional Country of origin: Germany Technical specifications Details max. wheel diameter 500 mm gear width 250 mm Psdpfx Aoy Rh Hyjf Serb max. module 5 min. module 12 mm total power requirement 2.2 kW weight of the machine approx. 1920 kg dimensions of the machine approx. 2500 x 1600 x 1900 mm cutter diameter max. 250 - 285 mm clamping table diameter 460 mm table hole 70 mm accessories: various Control unit conventional Additional information Documents

Condition: excellent (used), I am offering for sale an original DELO DELO-UNIPRO controller, designed for industrial adhesive dispensing and curing systems. The device is fully functional – it powers on correctly, the display works, and the menu is clear and fully operational (as shown in the pictures). Podpfx Afszrv Hzs Ssrb The visual condition is very good, with only minor signs of normal use. Technical specifications: • Manufacturer: DELO • Model: DELO-UNIPRO • Part number: 95 200 01 • Serial number: 1501 UNI 648 • Power supply: 100–240 V AC • Frequency: 50–60 Hz • Power consumption: 40 W • Interfaces: RS232, CAN, USB, Ethernet, Input/Output, Foot Switch, and 4 channels (CH1–CH4) Included in the set: • DELO DELO-UNIPRO controller The item being sold is exactly as shown in the pictures.

Condition: good (used), Year of construction: 1969, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm Prodpfx Aez Hcb Sjf Ssb number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) Psdpfx Afjv T Nqao Serb - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 1,200 mm, position of the milling head: Schwenkbar (45°), table diameter: 1,200 mm, total length: 5,250 mm, gear diameter: 1,250 mm, total height: 4,420 mm, total width: 4,700 mm, input frequency: 50 Hz, workpiece diameter (max.): 5,000 mm, type of input current: AC, milling length: 350 mm, spindle speed (max.): 160 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,000 mm, overall weight: 22,000 kg, distance table to spindle center: 1,350 mm, controller manufacturer: Sinumerik 840D, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, A ZFWZ 10 module for large gears up to 1250 mm in diameter and module 22, which was completely overhauled in 2009 by SerWeMa and converted to a Siemens Sinumerik 840D with six CNC axes. The machine is in operational condition in our hall in Chemnitz: you can inspect it while it is running, have us mill your own sample part if you wish, and collect it from us. No lead time, no risk. Sold by Serwema Retrofit Solutions, the company that performed the overhaul, owns the module drawing archive, and knows the machine inside and out. The ZFWZ 10 is the classic Chemnitz gear hobbing machine for gearbox construction, crane and conveyor technology, mining, and heavy machinery: heavy cast iron bed, 1200 mm table, milling head with ±45° swivel range. It mills spur and helical gears up to module 16 in hobbing and up to module 22 in single indexing. With 1000 mm of axial travel between the milling head axis and the table surface, long shafts and tall workpieces can be securely clamped. The Sinumerik 840D controls all six axes with an electronic gear train; the SerWeMa gear software guides you through workpiece and tool data via masks, without the need for programming. Pedpfxoz E Hy Ae Af Sjrb Technical data: max. workpiece diameter 800/1250 mm, table diameter 1200 mm, distance from milling head axis to table axis 80–780 mm, distance from milling head axis to table surface 350–1350 mm, max. module 16/22, max. milling cutter diameter 260 mm, max. milling cutter length 350 mm, tangential travel 250 mm, milling cutter speed 20–160 rpm, swivel angle ±45°. Footprint approx. 5.25 × 4.7 × 4.42 m, weight approx. 22 t. Equipment: Siemens Sinumerik 840D control with six CNC axes, machine enclosure, magnetic chip conveyor, circulating and loss lubrication, hydraulic unit, coolant system, operating manual. The 840D powerline control generation is no longer being developed by Siemens; we offer, as an option, an upgrade to Siemens Sinumerik ONE with Sinamics S120 and a new control cabinet, either before delivery or later at your facility – in which case, a warranty will be provided on the new electrical equipment. Also optional: sample part milling in our factory, geometry acceptance according to DIN, assembly and commissioning at your site, operator training. Spare parts and service are provided by a single source, worldwide, even after the purchase.

Condition: excellent (used), functionality: fully functional, Horizontal Gear Hobbing Machine Manufacturer: WMW HECKERT Model: ZFWVG 250x2000 VEB Fritz Heckert Prodpfx Aeyr S Upef Ssb ZFWVG 250×2000 Max. workpiece length: 2,000 mm Max. workpiece diameter: 250 mm Accessories: second milling head, hobs for various modules, steadies, clamping devices, etc.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (45°), table diameter: 4,000 mm, total length: 13,300 mm, gear diameter: 5,000 mm, total height: 5,700 mm, total width: 7,500 mm, input frequency: 50 Hz, workpiece diameter (max.): 5,000 mm, type of input current: AC, milling length: 600 mm, spindle speed (max.): 125 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 2,750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 1,750 mm, overall weight: 115,000 kg, distance table to spindle center: 3,300 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, The ZFWZ 5000 originates from Modul's Chemnitz gear machining division and is completely overhauled and delivered with a Siemens Sinumerik ONE control system by Serwema Retrofit Solutions, the company that houses the Modul drawing archive. Proven kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price and with a delivery time of twelve months. The machine mills external gears, both straight-toothed and helical, up to a module of 40 in hobbing and up to a module of 50 in single-indexing. With the internal milling attachment, internal gears are produced for gear rings of large roller bearings, rotary couplings, and planetary hollow gears, as used in wind power, mining, crane, and shipbuilding technology. Workpieces up to 5000 mm in diameter can be accommodated on the 4000 mm table, the milling head pivots by ±45°, and the 82 kW drive power at the milling head allows for roughing with high chip volume as well as finishing with precision. Technical data: max. workpiece diameter 5000 mm, table diameter 4000 mm, distance from milling spindle axis to table axis 300–1800 mm, distance from milling spindle axis to table surface 550–3300 mm, max. milling cutter diameter 500 mm, max. milling cutter length 600 mm, tangential travel 600 mm, milling cutter speed 10–125 rpm, drive power of milling head 82 kW, swivel angle ±45°. Installation dimensions approx. 13.3 × 7.5 × 5.7 m, weight approx. 115 t. Prjdpfx Aoz Etmpof Seb The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives, the latest Siemens generation with full availability of spare parts and support, in an air-conditioned switch cabinet of our own manufacture. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. The geometry acceptance is carried out according to the manufacturer's standard or DIN, with a protocol, jointly with you in Chemnitz. The scope of delivery also includes a machine safety fence with state-of-the-art safety technology, a new paint finish in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 48457-16, type of input current: three-phase, input voltage: 400 V, Mobile Höcker Polytechnik dust extraction unit for extracting wood chips and dry dust from woodworking machinery. The unit is equipped with a large filter bag, a 180-liter collection bag, and swivel casters for easy movement around the workshop. Technical specifications: Podpfx Afez Dv T Ae Ssrb Manufacturer: Höcker Polytechnik GmbH Type / group: Gr. 3 Motor power: 2.2 kW Power supply: 230/400 V, 50 Hz Motor speed: 2,800 rpm Airflow rate: 2,460 m³/h Extraction connection diameter: 160 mm Filter area: 3 m² Collection capacity: 180 liters Year of manufacture: 2000 Article number: 90303 Internal reference number: 48457-16 Condition: used, with normal signs of wear and tear. The actual condition and scope of delivery are shown in the photographs. The machine can be inspected by prior arrangement. Location: Gātciems, Latvia. We can assist with loading and arrange transport within Latvia or to other European countries. Price: EUR 500 excluding VAT. For purchases within Latvia, 21% VAT will be added. A 0% VAT sale may be possible for eligible EU companies with a valid VAT number.

Condition: good (used), Year of construction: 1954, machine/vehicle number: 1749, Offer 24178 Technical data: - Center height 250 mm - Center width 2000 mm - larger circulation - Ø over bed 490 mm Prsdpfxjtiym Re Af Sob - over cross slide approx. 300 mm - Spindle bore 72 mm - Taper of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm - Feed rates - Travel of the cross slide 200 mm - Travel of the top slide 115 mm - Drive 380 V / 5.5 kW - with: - tailstock, 3-jaw chuck, steady rest - Steel holder, rotating center point, - chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Condition: used, Technical details: center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm hobbing length: 2000 mm Prjdpfxev U T Dyj Af Sob number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m

Condition: used, Year of construction: 2004, Continuous drying machine Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 Technical specifications - Total connected power: 23 kW - Usable width of the pallets: 1300 mm - Usable length of the pallets: 7100 mm Podpfxjz A S Ims Af Serb - Total number of pallets: 24 - Infeed/outfeed speed of the workpieces (adjustable via inverter): 2-20 m/min - Max. workpiece thickness: 200 mm - Max. load-bearing capacity per pallet: 150 kg Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 630 mm, LATHE TECHNICAL SPECIFICATION – PERFORMANCE OVERVIEW Workpiece Capacity Turning diameter over bed (nominal / max): 630 mm / 660 mm Turning diameter over carriage: - Short slides: 400 mm - Long slides: 320 mm Max. swing in front of faceplate notch: 720 mm Notch length: 265 mm Over bed: 305 mm Over floor: 1125 mm Machine Construction & Spindle System Bed width: 550 mm Spindle bore: 72 mm Faceplate: - Diameter: 630 mm - Width: 120 mm Tooling & Setup Prsdpfxox Acpde Af Sjb Tool cross-section (cutter): 40 × 40 mm Tool holder side length: 200 mm Spindle & Drive Performance Main motor speed: 1400 rpm Spindle speed steps: 18 Max. permitted faceplate speed: 560 rpm Feed Ranges Longitudinal feeds: - Steps: 68 - Range: 0.035–10 mm/rev Cross feeds: - Steps: 68 - Range: 0.014–4 mm/rev Rapid Traverse Rates Longitudinal: 5000 mm/min Cross travel: 2000 mm/min Thread Cutting Capability Metric threads: - 84 types, 0.2–224 mm Inch threads: - 94 types, 140–1/8 TPI Module threads: - 72 types, 0.1–112 Pitch range: - 94 types, 280–1/4 Machine Dimensions Overall length: 2300 mm + distance between centers Width: 1850 mm Height: 1725 mm Ask for a testing video! Robust and precise heavy-duty lathe featuring wide turning capacity, extensive thread cutting options, and high feed/rapid traverse performance. Ideal for demanding workshops requiring versatility, power, and reliability.

Condition: used, Year of construction: 2003, Planer Rollers no. 17 Diameter 42 Belt width 2,000 mm. Minimum thickness 0.5 mm. Pjdpfx Ajzy Urljf Sjrb Maximum thickness 3 mm.

Condition: good (used), functionality: fully functional, Year of construction: 1995, operating hours: 10,246 h, machine/vehicle number: 5022/03, working width: 3,000 mm, 1995 COLLY folding machine in working order. DELEM DA20 numerical control Psdpfxsu E Eyrs Af Ssrb Power 125T for 3m

Condition: excellent (used), max. wheel diameter 250 mm gear width 40 mm max. module 6 min. module 1 number of teeth 8 - 100 cone distance 310 mm pressure angle 15 - 30 ° blade cutter head diameter 450 mm Psdpoz Dbzrefx Af Serb pivoting angle 0 - 90 Grad total power requirement 16 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 2,2 x 1,7 x 1,7 m Change gears, chip conveyor, cutting heads, knifes,...

Condition: excellent (used), 1 used, very well-maintained horizontal boring and milling machine / table drilling machine with point-to-point and contour control HEIDENHAIN TNC 145 and facing head Pjdpfjz Euuzsx Af Ssrb Manufacturer: WMW UNION, Origin Germany Model: BFT 130/7-TNC 145 Year of manufacture: 1984 Technical data: Spindle diameter: 130 mm Spindle shank: SK 50 Table surface: 2000 x 1800 mm Travel: X-axis, transverse 2785 mm Y-axis, vertical 2520 mm Z-axis, longitudinal 2345 mm W-axis, quill 900 mm B-axis, table 360° Table load: 8000 kg Speed range: 5-1000 rpm Facing head speed: 5-2500 rpm Feed force X/Y/Z: 20000/20000/25000 N Feed rate X/Y/Z: 5-2500/5-2500/2-2500 mm/min Rapid traverse X/Y/Z: 5/5/3.15 m/min Total connected power: 100 kVA Total power consumption: 70 kW Footprint L x W x H: approx. 8.40 x 5.9 x 5.5 m Weight: 35,300 kg Accessories / Special features: • Point-to-point and contour control HEIDENHAIN TNC 145 • Spindle Ø 130 mm with SK 50 with motorized tool clamping • Facing head • Feed and rapid traverse • Lateral table supports R + L with hardened guides • Coolant system • Guide rail telescope covers • Swiveling control panel • Separate control cabinet and hydraulic unit TOP condition! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1989, machine/vehicle number: SN: 00789901, functionality: unexamined, pressing force: 815 t, Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture approx. 1989, 8000 kN, last service in 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min-1 Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture 2011 with reel 1 (sandwich processing), SAWAB reel, year of manufacture 2011 with reel 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture 2011 with reel 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial no.: M2011-00170, year of manufacture 2011 including enclosure GWS project no.: 2011-60187 with peripherals: - Conveyor belt - Raziol system Prjdpfx Afozvdm Ro Seb Function and technical data not verified without additional items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! If interested, please contact us via email!

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N Prjdpfexyllvsx Af Sjb We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading