Used Wintec Vario Xm 300 Din for sale (17,329)

Condition: used, Year of construction: 2024, _____Vario XM 300 DIN basic equipment: two shares mounted on the frame with king pins, collision protection via deflection flaps, guided via parallel link, collision-proof central pin (tip), hydraulic swivel device left-right, hydraulic installation with 6 (or 4 for the three-point) quick hydraulic couplings in accordance with DN10-ISO 7241-1A and 1 pressureless return connection, curb deflector left-right, municipal attachment plate in accordance with EN15432-1:2011 F1, F1/C or F2 (formerly DIN 76 060, size 3 or size 5) with lifting system for tension-free lifting and lowering, lifting system with upper torsion spring fork for optimal road adaptation (vertical and horizontal parallel guidance), pressure relief valve, cylinder in strong design, double-acting, pendulum compensation up to 14°, additional springs for lateral inclination with the pendulum system, adjustable skids, warning flags with holder, adjustable LED lighting Distance block for stop angle 45° Parking foot Municipal paint RAL 2011 Damping rail PU Steel scraper barEquipment subject to additional charge:Switchover valveRubber deflectorAlso available with three-point attachment!From 16,145.00 _ (net)The picture is an example and can contain special equipment.,Storage location:null Gjdpfou Ebkysx Ag Roiu

Condition: used, Year of construction: 2024, _____Basic equipment: Frame with ploughshare Hydraulic swivel device left-right Hydraulic installation with quick hydraulic couplings in accordance with DN10-ISO7241-1A Curbstone deflector left-right Three-point attachment plate CAT 2N, 2 and 3N in two mounting heights / for MG-150 to -210 CAT 1N, 1 and 2N OR municipal attachment plate F1, F2 in accordance with EN15432-1:2011 (formerly DIN 76 060, size 3) with lifting system for tension-free lifting and lowering Pressure relief valve Cylinder in strong design, double-acting Pendulum compensation up to 18° Adjustable skids Attachment device screwed Warning flags with holder Parking foot Municipal paint RAL 2011Special equipment:Equipment subject to surcharge:Euro mountWheelsLED lightingPU scraper barsAlso available as a three-point attachment!Price from 7,013.00 (net)The picture serves as an example, can contain special equipment.,Storage location:null Godpfx Agou Ebkmj Rsiu

Condition: used, Year of construction: 2024, _____Basic equipment: two ploughshares mounted on the frame with king pin Collision protection via spring flaps Center pin secured against accidental triggering Hydraulic swivel device left-right Hydraulic installation with 4 quick hydraulic couplings and 1 unpressurized return connection Kerb deflector left-right Three-point mounting plate CAT 2N, 2 and 3N Overpressure valve Double-acting swivel cylinder Pendulum compensation up to 8° Adjustable sliding skids Central sliding skid with PU foot Spacer block for 40° end stop angle Municipal paint RAL 2011 Warning flags with holder LED lighting (only from 260 to 340) Steel scraper barOptional equipment:Three-point linkage Cat IIBoundary lights Selector valve for synchronous control 12 VSteel scraper barPicture serves as an example,Location:null Godpfju Hv Szox Ag Roiu

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Completely overhauled, 12-month warranty, available immediately. Equipped with a safety system for solvent-based substances in accordance with DIN 1539, including exhaust fan, supply air cage filter, as well as concentration monitoring and a recirculation air filter wall in the interior. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 300°C - Eurotherm controller 2404 (20 programs, each with 16 segments) - Eurotherm recorder - Connected load: 29 kW - 6 wire shelves included, plus V2A support brackets - Minimum exhaust air flow rate: 360 m³/h Giedpfx Aovcb U Ajg Rju - Maximum permissible solvent quantity: 36g at nominal temperature of 300°C - With concentration monitoring - New window seals - Net weight approx. 1200 kg - Includes documentation, CE declaration - Electrically tested and with DGUV test protocol Inspection in our warehouse by appointment. We offer new and used industrial ovens. Get in touch with us! Oven, ovens, drying oven, furnace, heat oven, heating cabinet, industrial oven, paint dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, recirculation drying cabinet, recirculation oven, solvent oven, chamber recirculation oven

Condition: used, Year of construction: 2003, functionality: fully functional, Ledinek High speed double side calibrate planer 150 m/min Gedpfxezc H T Us Ag Rjiu Rotoles 300 2V-KS 150 214 KW

Condition: used, Punching force: 300 kN Dimension(e) e.g. a 20 mm hole in 12 mm steel Stroke triggering via foot switch Support table with stops Gisdoy Epkgepfx Ag Rou Assortment of tools is included in the price

Year of construction: 2014, condition: good (used), Technical data capacitor Volume flow max.: 300m³/h Condenser mass max. in delivery condition: approx. 430mm x1610 mm high Cylindrical part: approx. Ø 273 mm Weight of the chamber in delivery condition: approx. 80 Kg Content upper part (condenser): approx. 30L Content lower part (receiver): approx. 28 L Material elastomers: NBR/FKM/PTFE Temperature condenser max: 1 to 80°C Condenser vacuum max: 0 to 1000 mbar (absolute) (Condenser not suitable for overpressure!!) Temperature exchanger max: 1 to 80°C Medium exchanger: water Water pressure exchanger max: 10bar Exchanger material: CU-tinned Material condenser: stainless steel Technical questions or other sizes on request. Godpfxjcpwhbo Ag Rjiu

Condition: used, machine/vehicle number: 008157, Max. working width: 250 mm Max. working thickness: 80 mm Extraction system: dry Gsdpfx Ajw Sdu Ueg Rjiu Number of painting guns: 4 Use: for paint Number of painting circuits: 1

Condition: used, O F F E R We can offer you ex stock, subject to prior sale and errors: TSCHUDIN (CH) Centerless cylindrical grinding machine Model TC-300 Year of manufacture 2001 Gjdswftt Uopfx Ag Roiu Grinding range – Ø 0.5 – 25 mm (30) Max. workpiece length for plunge grinding 125 mm (140) Max. workpiece length for through-feed grinding 300 mm Grinding wheel dimensions: Ø x width Ø 300 x 125 mm (140) Regulating wheel dimensions: Ø x width Ø 225 x 125 mm (140) Grinding wheel peripheral speed 35 m/sec Grinding wheel infeed 3 mm Regulating wheel speeds, steplessly adjustable 0 – 444 rpm Regulating wheel inclination Degrees Grinding wheel drive approx. 7.5 kW Total connected load approx. 13 kW – 380 V – 50 Hz Weight 2,500 kg Accessories / Special equipment: • The machine operates with a fixed workpiece position, allowing both the grinding spindle and the regulating spindle units to be adjustable. This simplifies machine setup as well as automatic workpiece loading and unloading. • SIEMENS PLC control for automatic operation with SIEMENS touchscreen. Complete electrics and PLC control renewed in 2016! • Electromechanical profile dressing device for the regulating wheel • Regulating and grinding wheel speeds are steplessly adjustable. • Adjustable plunge guide bridge with mounted plunge workpiece rest • Electromechanically controlled workpiece pusher & automatic pneumatic workpiece ejector • Additional outfeed cylinder for automatic tilting of workpieces after plunge grinding (adjustable 4–30 mm) • Machine is prepared for use with a HELP-TEC bar loader MSHL08/400P, which is currently not present. • Complete enclosure of working area with monitoring technology • Separate control cabinet, operating and electrical manuals for the retrofit Condition: Very good! Fitted with new electronics in 2016! Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – after receipt of invoice Always a large selection of grinding machines in stock – please inquire for your requirements!

Condition: repair required (used), Year of construction: 1990, functionality: fully functional, Shears for cutting reinforcing steel including measuring trolley, winch, sliding measuring stop for measuring length. Gjdpfx Asvt Eqpjg Roiu

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm Gjdewz Nzmjpfx Ag Rjiu - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Condition: used, mileage: 154,200 km, power: 110 kW (149.56 HP), first registration: 11/2002, fuel type: diesel, empty load weight: 5,730 kg, maximum load weight: 1,770 kg, overall weight: 7,500 kg, tire size: 12.5R20, axle configuration: 4x4, wheelbase: 3,080 mm, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 2, loading space length: 2,400 mm, loading space width: 2,090 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, low noise, onboard computer, power assisted steering, trailer coupling, Vehicle location: Bovenden, registration certificate available. 2x air suspension seats, rear window, center console, 8 switches, PTO (power take-off), raised exhaust, differential lock, high beam auxiliary lights, work lights, rotating beacon, storage box, leaf spring suspension, air/light/hydraulic trailer coupling, aluminum tank, low-noise G1, winter service equipment, swinging flaps, yellow environmental badge. Wheelbase: 3,080 mm Body: 3-way tipper body with aluminum drop sides. Differential lock on front axle, VarioPilot (left/right-hand drive conversion), size 3 front mounting plate, rear attachment brackets, auxiliary gearbox with working and crawler gears, dual-circuit hydraulic system, 3-chamber hydraulic system, tipping cylinder, rear 4-way cell plug connection for cells 2+3, additional rear pressure supply line, separate rear return line, 3rd circuit high-performance hydraulics, front 2-way cell 3 hydraulic plug, front 4-way plug cell 1+2, separate front return line, additional front pressure line for 3rd circuit, on-board socket for equipment power supply, engine PTO, selectable engine auxiliary drive i=0.89. Gross train weight: 24,000 kg Giodpfsvhi Tkox Ag Rsu Previous owner: City of Rees All information without guarantee as the vehicle is still incoming! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Condition: used, mileage: 27,605 km, power: 130 kW (176.75 HP), first registration: 01/2011, fuel type: diesel, empty load weight: 5,930 kg, maximum load weight: 3,570 kg, overall weight: 9,500 kg, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 3,080 mm, next inspection (TÜV): 07/2026, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 2,400 mm, loading space width: 2,050 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, low noise, onboard computer, power assisted steering, trailer coupling, Vehicle location: Bovenden, customer’s premises. Rear window, electric window left, electric window right, air conditioning, center console, 8 switches, constant throttle, PTO, high-mounted exhaust, differential lock, auxiliary headlamps, work lights, rotating beacon, storage box, trailer coupling with air, light, and hydraulic connections, aluminum tank, low-noise G1 specification, winter service equipment, lashing eyes, swinging tailgates, green environmental badge. Gjdpfozb H Sbsx Ag Rjiu Wheelbase: 3080 mm. Body: three-way tipper with aluminum sidewalls. Differential lock on front axle, two-line trailer brake system, rear radiator guard, Vario Pilot (right-/left-hand steering change), front mounting plate size 3, rear attachment brackets, ABS trailer socket 24V, trailer socket 12V/13-pin additional, front socket 7-pin 24V, cab pre-equipment for mower door/seat right, split-range gearbox with work group, tip cylinder with changeover valve, cell 2, dual-circuit hydraulic system, 3-cell with snowplow relief, dual-circuit proportional hydraulics, 3-cell hydraulic system, hydraulic system with 240 bar system pressure (2nd circuit), snowplow relief, pressure and separate return line center 2nd circuit, hydraulic connector front, 2nd compartment on cell 3, hydraulic connector front, 4-fold on cell 1+2, pressure line at front for 2nd hydraulic circuit, separate return line at front, flat-sealing hydraulic connectors, on-board socket with C3 signal 24V, engine PTO including front PTO (output 1000 rpm, with cooling and PTO shaft 1 3/4'' spline profile), PTO speed limitation to 540 rpm, trailer coupling with large ring (spring) bolt = 38 mm, designation: LOF permit towing/multipurpose tractor – key 891000. Approx. 1550 operating hours! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted.

Condition: good (used), Year of construction: 2005, operating hours: 8,167 h, lifting height: 4,210 mm, fuel type: electric, mast type: duplex, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, Empty weight: 5.400 kg Giedpfxezayypo Ag Rsu Lifting capacity: 3.000 kg Number of valves: 3 CE mark: yes Technical condition: good Visual appearance: good Forklift weight class: 1928 Fork carriage: Sideshifter Please contact Bas Sindorf for more information

Condition: excellent (used), mileage: 204,260 km, power: 51 kW (69.34 HP), first registration: 09/1998, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 1998, Engine displacement: 2,477 cc Giedpfxsy Rzy He Ag Reu Unladen weight: 1,450 kg Payload: 1,055 kg Gross vehicle weight: 2,505 kg Technical condition: very good Visual condition: very good Contact Thierry Leemans for further information.

Condition: used, mileage: 155,948 km, power: 110 kW (149.56 HP), color: yellow, gearing type: semi-automatic, loading space length: 29,000 mm, loading space width: 20,600 mm, loading space height: 4,000 mm, Year of construction: 2000, Equipment: ABS, air conditioning, power assisted steering, For vehicle inquiries, Mr. Seidel will assist you (by phone at …). Mercedes-Benz Unimog U300 4x4 Platform Truck Options and equipment: - A52: Differential lock on front axle - B29: Pneumatic quick-release system in the spring-loaded cylinder - B42: Dual-circuit trailer brake system - C50: VarioPilot (right/left changeover steering) - C67: Enlarged fuel tank - C87: Upward exhaust pipe - D11: Front mounting plate DIN 76060 Type B, Size 3 - D50: Rear attachment brackets - D60: Mid-mounted attachment brackets - E37: Constant power socket 12V/15A, with C3 signal - E40: ABS trailer socket 24V, 7-pin / 5-pin - E42: Trailer socket 12V, 13-pin - E45: Front socket 24V, 7-pin - E47: Equipment socket 24V/40A with C3 signal at battery box - E53: Preparation for mobile phone/radio 12V Giodoyfnrqjpfx Ag Rou - E62: Radio with cassette player - F60: Cab tilting device - G21: Splitter transmission with work and crawler gear group - H02: Single-circuit hydraulic system - H12: 2-circuit hydraulic system - H75: Four hydraulic quick couplers at the front for circuits 1 and 2 - H79: Separate return line at the front - J08: On-board socket 24V in cab with C3 signal - J24: Tachograph with diagram disc, for 2 drivers - L45: Work light at cab, rear-facing - L47: Extra headlamps for front-mounted implements - L50: Rotating beacon, yellow, left, with stand - M37: Alternator 28V / 100A (2800W) - N05: Rear-mounted engine PTO with flange - N08: Engine PTO including front PTO - N09: PTO speed limiter - N16: Transmission PTO, fast, with 4-hole flange - Q29: Towing hitch (MAUL 360x200) by Ringfeder for 13t GWR - Q36: Rear cross member for increased trailer load (13t GWR) - R27: Disc wheels 11x20 super - S02: Driver’s air-suspended seat - S10: Passenger’s air-suspended seat - S26: Electrically heated windshield, laminated glass - S49: Sliding rear window (left) - S50: First aid kit - S81: Extended mirror brackets - S82: Wide angle mirrors - S83: Ramp mirrors - X20: Increased axle load rating - X70: Red/white reflective warning stripes - Z96: Provision fee - Additional lamps: rear cab Loading area dimensions: L 2,900 mm x W 2,060 mm x H 400 mm - Towing hitch: 40 mm Rockinger - Coupling heads: red/yellow - Gross vehicle weight: 7,500 kg - Unladen weight: 6,240 kg - Payload: 1,260 kg - Tyre tread depth: 1st axle: 10-11 mm, 2nd axle: 15-16 mm We are happy to provide you with a leasing or financing offer upon request. Mr. Seidel (Tel: …) will be pleased to assist you. Further information can be found on our homepage. ... Errors, changes and prior sale reserved!!! = More information = Engine displacement: 4,249 cc Gross vehicle weight: 7,500 kg For further details, please contact Tobias Ebert.

Condition: new, Bernardo Universal Lathe Titan 560 x 3000 Pro Vario Technical Specifications Centre distance: 3000 mm Centre height: 280 mm Swing over bed: 560 mm Swing over gap: 785 mm Swing over cross slide: 350 mm Bed width: 350 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1 – 8 Speed range: 25 – 220 / 220 – 1500 rpm Longitudinal feed range (42): 0.055 – 3.061 mm/rev Cross feed range (42): 0.025 – 1.384 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 75 mm Quill stroke: 185 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (L): 4340 mm Width x Height: 1150 x 1610 mm Weight: approx. 3000 kg Features • Standard with Delta frequency inverter for high torque at low speed and nearly constant speed under load • Stepless speed control, with digital speed readout • Versatile applications in general engineering, production, single-part manufacture, etc. • Removable gap bridge allows machining of large-diameter workpieces • Rapid traverse longitudinally and in cross direction as standard, reducing non-productive time • Modern main spindle bearing with precision angular contact ball bearings • The machine bed is made from a single casting, extremely torsion-resistant and low-vibration, providing the foundation for precise turning • Tailstock is adjustable for taper turning • Central lubrication system for carriage Scope of delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Fixed steady rest – max. workpiece diameter 180 mm • Travelling steady rest – max. workpiece diameter 120 mm • Foot pedal with CE-compliant brake function Gisdpfxjxl Tdqo Ag Reu • Safety guard for quick-change tool post • LED machine lamp • Initial fill with Shell Tellus 46 • Faceplate 450 mm • 2 centre points • Frequency inverter • Digital speed readout • Safety slip clutch • Rapid traverse longitudinally and in cross direction • Coolant system • Quick-change tool post with 4 holders • Change gears • Reducing sleeve • Chip guard tool kit

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, oil tank capacity: 400 l, controller model: Cybelec ModEva 19 T, bending force (max.): 300 t, distance between stands: 3,550 mm, working length: 4,050 mm, The machine control was renewed in 2022! TECHNICAL DETAILS Press force: 300 t Bending length: 4,050 mm Distance between uprights: 3,550 mm Oil capacity: 400 l MACHINE DETAILS Control system: Cybelec ModEva 19 T Total power requirement: 22 kW Machine weight: approx. 20,000 kg EQUIPMENT 2 bending aids Matrix displacement Pneumatic tool clamping, top and bottom Crowning Controlled axes: y1, y2, x, R, z1, z2 Two-hand foot control 2 parking stations for bending aid Gedpfxjxwnqce Ag Reiu

Condition: used, In this offer you purchase a used inkjet printing system "Canon VarioPrint i300" Object of sale: 1 x Canon VarioPrint i300 with the following equipment: The exact equipment can be found in the attached PDF document. Meter readings: Total: Approx. 166,100,000 Condition: The machine has been continuously serviced by Canon. Maintenance certificates available. A certified disassembly was carried out by Canon. The machine was restored to its delivery condition. A final test ran flawlessly. The machine was then dismantled by Canon specialists and packed in wooden crates, which were also originally used for delivery by Canon. The sales price does not include (seaworthy) packaging, which is available for a deposit. The machine is our property and is NOT a brokerage transaction. This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function. Giedpfxjtw Sk Uo Ag Rju Test printouts are shown. Packaging and dispatch: An inspection of the machine in Belgium is possible by arrangement. The machine is already packed in the original delivery boxes. Worldwide shipping possible on request! A deposit of €15,000 is charged for the packaging. This fee will be refunded upon return. For further information you can of course contact us personally.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: TM-2006-31, Old lady but still running good. A lot of new sanding bellts Gedjx Swmrepfx Ag Rjiu

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 24 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: the Airtech handheld laser welding system with 3,000 watts of power! Ideally suited for demanding sheet metal fabrication – efficient, safe, and highly flexible in use. Highlights and Features: - Power: 3,000 watts for top welding quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – optimally positioned for comfortable operation - Robust housing, intelligent internal layout for maximum service life - Touchscreen display for easy operation - Optional automatic multifunction wire feeder - Safety features: three-color alarm, safety interlocks, misuse protection mechanism - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Advantages - Safe operation thanks to extensive protection mechanisms and alarm systems Godpfewzv D Iox Ag Roiu - Flexible applications including automatic wire feeding and robotic integration - Low operating costs and easy maintenance through well-designed technology and durable components For more information or a consultation, the Airtech team is happy to assist you!

Condition: not inspected (used), Year of construction: 2003, functionality: fully functional, Heavy-duty Stratoplan planer with 6 spindles. Year of manufacture: 2003 Feed rate: 30 m/min to max. 300 m/min. Spindles: U/T/R/L/U/T Working height: 17 mm to max. 120 mm. Working width: 50 mm to max. 300 mm. Gijdpewhdnbofx Ag Rsu Supplied with infeed table (accelerator) and cross conveyor. 6 sets of tools. Table height: 1,100 mm Working width: 50-300 mm Working height: 17-120 mm Feed rate: 30-300 m/min Control system: Siemens S7 Connected load: 390 kW

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Control Xinje XD5 Gsdpfx Aeylp A Dog Roiu min/max. pitch cone length 200 - mm total power requirement 13,4 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m

Condition: used, Year of construction: 1993, functionality: fully functional, Manufacturer: Sandingmaster (Holland) Model: SCSB3-1300 Year: 1993 Godpfjxwwkrsx Ag Rsiu Material: solid wood panel Working width 1300 mm Working height 150 mm Motor contact roller 25 HP Motor fine sanding pad 15 HP Feed motor 1/1,75 HP Feed speed 7 and 14 m/min 23 and 46 ft/min Standard hardness contact roller 80° shore Dimensions sanding belts 1900 x 1330 mm Weight ~4000 kg

Condition: used, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, input frequency: 50 Hz, laser wavelength: 1,080 nm, continuous power: 3,000 kW (4,078.86 HP), Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine SURE3 kW – Top Technology for Efficient Sheet Metal Welding Gedpfx Ajy R I Tgsg Roiu Discover the smart and powerful solution for precise laser welding: The SURE handheld laser welding system with 3,000 watts of power! Perfectly suited for demanding sheet metal processing – efficient, safe, and flexible to use. Highlights and Features: Power: 3,000 watts for the highest welding quality and speed Laser wavelength: 1080 nm, continuous operation with a modulation frequency of up to 20 kHz Handheld laser welding head – optimally positioned for comfortable operation Robust housing, intelligent internal structure for maximum service life Touchscreen display for easy operation Automatic multi-function wire feed possible Safety features: Three-color alarm, safety interlocks, protection mechanism against incorrect operation Cooling via a separate water circuit with a 13-liter tank volume CE-certified components according to European standards. Your Advantages Work safely thanks to extensive protection mechanisms and alarm systems Flexible application possibilities, including automatic wire feed and robot integration Low operating costs and easy maintenance thanks to well-designed technology and durable components.