Used Wenzler 6-Stat. Multiway Drum Machine for sale (97,272)

Year of construction: 1986, condition: used, Machining: from 2 sides Prodpfxecqyd He Ahcsa 10 hydraulic drilling units: CNC-controlled, 4 kW each Quill stroke: 150 mm Tool holder: SK 40 Spindle speeds: continuously variable Note: Thread cutting on 4 drilling units can be programmed via CNC without a compensation chuck. 6 clamping stations with hydraulic 2-jaw chucks: Geiger & Haag, GH 2B-215.00 Rapid traverse speed of the units: 7 m/min Complete hydraulic system Coolant system Chip conveyor Machine was overhauled in 1993 for 100,000.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Podpfx Ahezav D Djcora Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm Predpfxozf Nk Tj Ahcea • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Year of construction: 2023, operating hours: 25 h, condition: like new (used), Type: GREMAC e2+ Year of manufacture: 2023 Location: Velbert (NRW) Operating hours: approx. 25 h Available from: at short notice, by arrangement Electrically powered drum screening machine for screening excavated soil, earth, stones, construction debris, or other screenable materials. Optional petrol or diesel generator available. With a maximum trailer weight of 3.5 tons, the unit is towable by passenger car. Drive: Electric motors, alternatively via generator (petrol/diesel) Supply voltage: 380 - 420 V / CEE-16A Drum length: 3,000 mm Drum diameter: 1,000 mm Screening area: 9.3 m² Hopper: 1.3 m³ Weight: 3,250 kg - max. 3,500 kg Towing device: Ball coupling, towing eye (40/50 mm) Mesh size: 20 mm² Screening technology Made in Germany. Engineered for longevity. The GREMAC e2+ screening plant impresses with its hot-dip galvanized frame and high-quality materials, ensuring a long service life. Condition: As new Pjdpfx Ahsygk Iwjcera Incl. petrol generator MOSA GE 13054 HBS, 3-phase nominal output 12 kVA / 400V Warranty The seller guarantees that the machine is free from defects according to the state of the art for a period of 6 months or 350 operating hours, whichever comes first. Natural wear and tear, or damages caused by improper use, are excluded from warranty.

Year of construction: 1995, condition: used, CNC control – 11 axes Wenzler: Loading and unloading portal, CNC control: Sinumerik 810, CNC control linked via PLC. Workholding system with 8 power chucks, arranged vertically on a clamping drum: Currently, shaft-like workpieces with a length of approx. 200 mm and a diameter of approx. 20 mm are completely machined using the MTA 8: Machining: Face turning – longitudinal turning – drilling – thread forming – internal hexagon milling – external threads milled. Prodpscqyfmefx Ahcea 6 machining stations with: ARTIS – tool monitoring. 4 machining stations with: Internal tool cooling. Space requirement: approx. 40 m². ARTIS cutting force monitoring. Complete hydraulic system and electrical control cabinets. Complete coolant system. Cleaning system for emulsion. 2 platforms. Chip conveyor. Oil sumps. Palletizing system by Metabo. Extraction system. Various tool holders, clamping devices. Very good condition. Original price of the system: 1.35 million. Machine no. 306. Weight: 17 t.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) Pedsznwu Sepfx Ahcera - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, We offer a drum-type shot blasting machine with a rubber belt – COGEIM TG1, a machine equipped with a magnetic separator. Year of manufacture – 2015. Overall height – 4595 mm. Pedpfxsztp Ine Ahcera Drum diameter – 700 mm. Drum working load – 200 kg. Turbine power – 5.5 kW. Automatic filter. Total operating hours – 10500. The machine can be operated both manually and automatically. Complete documentation is available for the machine. The machine is currently disassembled and stored in a warehouse. Shot blasting machine, blasting, sandblasting, shot blasting, sandblaster.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. Prjdpfx Ahszt Ni Escja The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: X-TEK Systems Ltd., England Model: RTR160UF Type: Ultra Focus X-Ray System Max. X-ray voltage: 160 kV Max. power: 60 W Focus size: 5 (Ultra Focus) Manipulator: 50 kg, 5 axes Power supply: 230 VAC, 50/60 Hz Serial number: RTR/124 Prjdpozl Scrofx Ahcea Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Condition: good (used), Year of construction: 2019, 400mm swing, 220mm max turning diameter, Pedpfeyyaq Nex Ahcora 510mm cutting length, Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4500rpm, 3 jaw chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor,

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4DOUG52347, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 261 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, Professional Production Set of Six JUKI Industrial Sewing Machines from the MASI JEANS Factory This lot consists of six JUKI DDL Series industrial single-needle lockstitch sewing machines, removed directly from the production lines of the former MASI JEANS factory in Estonia. The JUKI DDL-8500 and DDL-8700 Series are among the world's most widely used industrial sewing machines, renowned for their reliability, smooth operation and consistent stitch quality. Designed for continuous production environments, they are an excellent choice for garment manufacturers seeking dependable, high-speed sewing equipment. Because all machines operated in the same factory, this matched production set offers consistent performance, common spare parts, simplified maintenance and identical operating principles, making it ideal for expanding an existing production line or establishing a new sewing department. Bundle Contents Machine 1 Model: JUKI DDL-8700-7 Internal Reference: 6A Machine 2 Model: JUKI DDL-8700-7 Internal Reference: 109A-7078 Machine 3 Model: JUKI DDL-8500 Year: 2002 Internal Reference: 113A-7101 Machine 4 Model: JUKI DDL-8500-7 Year: 2001 Internal Reference: 26B-7049 Machine 5 Model: JUKI DDL-8700-7 Internal Reference: 27B-7088 Machine 6 Model: JUKI DDL-8700-7 Year: 2002 Internal Reference: 28B-7090 Technical Specifications Manufacturer: JUKI Corporation Model Series: DDL-8500 / DDL-8700 Machine Type: Industrial Single-Needle Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Fully Automatic Lubrication System Complete Industrial Workstations Heavy-Duty Steel Stands Five machines equipped with the JUKI "-7" electronic automation package featuring: • Automatic Thread Trimming • Automatic Backtacking • Automatic Needle Positioning Key Features • Factory-matched production set • Six professional JUKI industrial sewing machines • High-speed, reliable industrial performance • Excellent stitch quality for continuous production • Common spare parts and maintenance procedures • Complete workstations ready for installation • Proven Japanese engineering Applications • General garment manufacturing • Denim and jeans production • Workwear and uniforms • Shirts and sportswear • Medium-weight woven fabrics • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained operational until the scheduled closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all associated costs. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot. Podpeznlbyefx Ahcsra

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm Prodpfx Asy Nd Siehcja turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: like new (used), ⚙️ Studer S30-1 CE ⚙️ 🔹 High-precision cylindrical grinding machine for external and internal grinding. 📐 Main features: ↔️ Distance between centers: 1000 mm 📏 Height between centers: 175 mm 🇪🇺 CE marking 🔄 COMPLETE RETROFIT The guideways have been refurbished, bearings replaced, the installation and electrical cabinet have been renovated, a complete paint job has been performed, and the geometry has been adjusted to restore the machine's original precision. Predpfezu Iyfox Ahcja ✨ An alternative to purchasing a new machine: thanks to the complete retrofit, it offers a level of precision, reliability, and performance comparable to that of a new machine, with a considerably lower investment. 🧰 Wide range of accessories available. 📅 Delivery time: please inquire. 🏷️ Project reference: OP25-007

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Psdpfxjxmlinj Ahcera

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: A79N517901, input voltage: 230 V, travel distance X-axis: 450 mm, travel distance Y-axis: 360 mm, overall weight: 720 kg, total length: 3,040 mm, total width: 1,360 mm, total height: 1,750 mm, nominal power (apparent): 1 kVA, rotational speed (max.): 1,000 rpm, rotational speed (min.): 100 rpm, Brother BE-1206B-BC-PC Industrial 6-Head Embroidery Machine Professional 6-Head Commercial Embroidery System for High-Volume Production The Brother BE-1206B-BC-PC is a professional multi-head industrial embroidery machine designed for continuous commercial production of logos, workwear, uniforms, caps, promotional textiles, and fashion garments. Featuring six embroidery heads with twelve needles per head, the machine enables simultaneous embroidery of multiple garments while maintaining excellent productivity and consistent stitch quality. The machine has been used in professional garment manufacturing and is offered as part of the MASI JEANS factory liquidation. Technical Specifications • Manufacturer: Brother Industries, Ltd. • Model: BE-1206B-BC-PC • Machine Type: Multi-Head Industrial Embroidery Machine • Configuration: 6 Embroidery Heads • Needles: 12 Needles per Head • Total Needles: 72 • Maximum Embroidery Speed: Up to 1,000 stitches per minute • Embroidery Area: Approximately 360 × 450 mm per head • Stitch Length: Adjustable • Control System: Digital PC-Controlled Programming Interface • Automatic Thread Change: 12 Colors per Head • Automatic Thread Trimming • Heavy-Duty Industrial Frame • Integrated Production Table Key Features • Six-head simultaneous embroidery system • High-volume commercial production • Automatic 12-color thread change on each head • Automatic thread trimming Psdpfxezib Aps Ahcora • Digital pattern programming • Accurate stitch positioning • Suitable for flat garments and various embroidery applications • Heavy-duty industrial construction • Designed for continuous production environments • High productivity with consistent embroidery quality Includes • Brother BE-1206B-BC-PC embroidery machine • Integrated industrial table • Thread stand • Embroidery hoops as shown • Digital control interface • Industrial frame Applications • Corporate logo embroidery • Workwear and uniform production • Promotional textiles • Sportswear • Fashion apparel • Caps, jackets and bags • Contract embroidery production • High-volume embroidery workshops Condition • Used industrial condition • Previously used in professional garment production • 5 embroidery heads fully operational • 1 embroidery head requires repair and is currently not operational • Good overall mechanical condition • Normal cosmetic wear consistent with industrial use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the size, weight, and precision alignment of the machine. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Pjdpfxjzmyzfj Ahcsra

Condition: good (used), Year of construction: 2022, functionality: fully functional, product width (max.): 1,300 mm, working width: 1,300 mm, number of drawers: 4, 2022 LISCHENG FLEXO 4 COLLORS, AKE BOSE INK SISTEM, WISIBLE IN PRODUCTION PRINTING ON PAPER Pedpoy Rr R Aefx Ahcsra

Year of construction: 1982, condition: used, Machining units: from 3 sides Pedpjcqydrjfx Ahcera Machine has 6 stations: with a horizontal main spindle Notes: Primarily suitable for precision-bored parts, but also for armature parts and shaft parts that need to be machined from two sides.

Condition: good (used), Year of construction: 2011, 400mm swing over bed, 216mm Swing over the Cross-slide, 760mm between centres, 54mm spindle bore, 2500rpm spindle, 5.75kW Spindle Motor, Prototrak SLX Control, 3 jaw chuck, auto toolpost, Tailstock, Coolant Prsdpfoucdt Ajx Ahcoa

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Podpfx Ahjza T A Rscsra Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Year of construction: 2016, operating hours: 7,000 h, condition: excellent (used), functionality: fully functional, For sale: Terra Select T60 on crawler chassis Podsy Ahi Espfx Ahcsra Year of manufacture: 2016 with approx. 7,000 operating hours 81 kW JCB engine without Adblue Long discharge conveyors Extra-large feed hopper Drum: 2,200 mm x 5,500 mm

Condition: not inspected (used), functionality: unexamined, Lot of machinery for making cable drums Some of the machines in the batch: Small Coil Line Claramunt Small Coil Nailer Cutter Template Table Large Nailer Rollers Predpfothqqbex Ahcoa Large Fere Nailer Large Edge Trimmer Large Cable Outlet Machine

Condition: used, Automatic packing machine Manufacturer : MAIR Model : .90.D.5.SL Automatic strapping machine with automatic wood support insertion Prodpfsvtp Hbjx Ahcja Manufacturer: ITIPACK Model: SKE/M/TS-31 J-WILT/4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 3,5 - 10 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/5/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 3,5 – 10 m Rectangular bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 3 Tn

Year of construction: 1971, condition: excellent (used), Manufacturer: SONNENBERG Type: FTM Year of manufacture: 1971 Dimensions: approx. W 1.00 x D 1.00 x H 1.50 m Weight: approx. 500 kg All information is subject to change without notice. The machine is in very good condition. A demonstration under power is possible at any time in our showroom. Predpfjd Sdg Sex Ahcsa

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm Predpfx Ahoy Du N Uocoa TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER