Used Weiler Praktikant for sale (216)

Condition: good (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: HK06, spindle bore: 48 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 48 rpm, overall weight: 800 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 7 A, WEILER PRAKTIKANT GS Lead and Feed Spindle Lathe - Connection: 5.5 kVA - Distance between centers: approx. 700 mm - Center height above bed: 160 mm - Turning diameter above bed: 320 mm - Center height above cross slide: approx. 100 mm - Turning diameter above cross slide: approx. 200 mm Kdodpfszxzmyox Ah Ejt The machine is equipped with a tailstock, a Multifix tool holder, and a quick-change chuck, including a three-axis digital display from the manufacturer FAGOR. FCA D-72589 Westerheim - loaded onto a truck.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Parallel Lathe WEILER type PRAKTIKANT 160 B Between points: 650 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 192 mm Centre height: 160 mm Spindle diameter: Ø 40 mm Rotation: from 48 to 2500 RPM Turret Multifix type A 3-jaws chuck Ø 135 mm Year of construction: 1999 2 speeds spindle motor - 3kW Threadings Metric + Whitworth Tailstock CM3 Scale 2 axes MITUTOYO Supplied with (see photos) : 1 clamps system 1 4-jaws chuck Ø 135 mm 7 MULTIFIX tool holders + various tools ariousSet of clamps Voltage: 380 V Length: 1800 mm Width: 1100 mm Total height (with light): 2100 mm Weight: approx 900 KG Kdjdpfx Ajzwcn Njh Ejt

Condition: like new (used), Year of construction: 2013, Weiler Praktikant VCD Precision Lathe (2013) Manufacturer: Weiler Type: Praktikant VCD Precision Lathe Year of Manufacture: 2013 Condition: used, very good, like new, no signs of wear, including new maintenance and inspection report prior to sale. Distance between centers: 650 mm Swing over bed: 160 mm Kdodpfszza Nrsx Ah Est Swing over cross slide: 320 mm Swing over compound slide: 190 mm Cross slide travel: 150 mm Compound slide travel: 110 mm Compound slide swivel range: +/-65° Bed carriage travel: 350 mm Bed width: 205 mm Tool holder cross-section (height x width): 20 x 20 mm Height from top slide to center line: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in the front bearing: 70 mm Spindle bore: 43 mm Internal taper of the main spindle: Metric 50 Drive power: 6 kW Spindle speed range: 30 - 4000 rpm Number of gear stages: 1 Number of spindle speeds: infinitely variable Number of feeds: 24 Longitudinal: 0.02 - 0.63 mm/rev Cross: 0.006 - 0.2 mm/rev Tailstock diameter: 40 mm Tailstock travel: 85 mm Internal taper of the tailstock: 3 MK Weight, without packaging and accessories: approx. 1150 kg Length / Width / Height, net: 1720x890x1700 mm Headstock / Back wall / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Housing of the display screen: Blue NCSS 4550-R80B.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Kodpfx Ahoztyrqo Eedt Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Condition: excellent (used), Year of construction: 2013, WEILER Praktikant GS – Precision lathe For sale is a used WEILER Praktikant GS precision lathe. Technical data: • Manufacturer: WEILER • Type: Praktikant GS • Machine number: ID03 • Year of manufacture: 2013 Kdjdpfxozl D Umj Ah Est • Operating voltage: 400 V • Control voltage: AC 230 V • Connected load: 5.5 kW • Rated current: 7 A • Frequency: 50 Hz • Main fuse: 25 A • Design: 1 • Machine weight: approx. 710 kg The machine is ideally suited for use in workshops, training companies, and for the precise production of individual parts and small series. It is being sold as a used machine. Inspection and functional testing are possible by arrangement.

Condition: used, Year of construction: 1996, functionality: fully functional, Weiler Praktikant 160 AC lathe, manufactured in 1996, with a 3-axis Heidenhain digital display, three-jaw chuck, Multifix system, rear splash guard, electric chuck guard, collet chuck system with a set of collets, and change gears. The machine is in good, operational condition and can be demonstrated under power by arrangement. Kdsdpfx Aezpfw Dsh Eet

Condition: used, Year of construction: 2002, Weiler Praktikant VC Precision Lathe Manufacturer: Weiler Type: Weiler Praktikant VC Precision Lathe Year of Manufacture: 2002 Condition: Used, very good, maintained and inspected according to Weiler's factory specifications, with inspection report. Technical Details: Turning diameter 250 mm Turning length 650 mm Center height 160 mm Swinging diameter over cross slide 320 mm Swinging diameter max. over compound slide 190 mm Main spindle: Speed range – main spindle 30 – 4,000 min/-1 Drive power – main spindle 10 / 6.0 kW Gear stages 1 Spindle nose: 5 / DIN 55027 Spindle diameter in the front bearing 70 mm Spindle bore 40 mm Usable bar diameter 40 mm Tailstock: Quill stroke 85 mm Quill diameter 40 mm Tailstock mounting MK 3 Feeds: Number of feeds 24 Longitudinal feed 0.02 – 0.63 mm/rev Cross feed 0.006 – 0.2 mm/rev Thread cutting: Metric 0.25 – 8 mm Inch 80-2 1/2" Module 0.25 – 4 mm Travel paths: Compound slide travel 150 mm Kedezza Uzspfx Ah Eedt Top slide travel 110 mm Swiveling movement 180 ° Total power consumption 15 kVA Machine weight approx. 1.0 t Space requirement approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC Precision Lathe – Machine light – Documentation – Tailstock – 8x Machine feet – Coolant system

Condition: excellent (used), functionality: fully functional, Weiler Praktikant R 500 lathe In very good condition, turning test: 100mm, runout 0.005 parallel. Guideways and smooth running in all speeds are flawless. Turning diameter: 280 x 500 Spindle speeds: 42 - 2000 Spindle bore: 36 3-jaw chuck Röhm 160, live center, quick-change drill chuck, lighting, coolant system. Kedozbhnqspfx Ah Esdt Multifix A with 4 holders, additional accessories available upon request. Dimensions: L 1.42m, W 0.6m, H 1.24m, weight approx. 600 kg Can be inspected while powered on. Free loading at D - 88433 Schemmerhofen.

Condition: reconditioned (used), Year of construction: 2001, Universal lathe with guide and lead screw Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 2001 – partially overhauled Newly painted RAL 7035 light grey Machine No.: 4790 Center height: 160 mm Kdjdpfxezy Ngqo Ah Eet Distance between centers: 650 mm Warranty: 6 months on the mechanics, which have been partially overhauled by us. The warranty does not cover the electrical and electronic components, as they have only undergone a functional test. For machines located outside our North Bavarian sales area, the travel costs must be borne by the customer. Geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T, new - Lever-type collet quick-change chuck for collet type K32 (386E) - Covered guide and lead screw - Braked drive motor - Coolant system - Electrically secured chuck guard, new - Quick-change tool holder size A - Simple bed stop - Chip guard - Operating manual Used, as is The machine is technically in the condition corresponding to its original year of manufacture.

Condition: good (used), Year of construction: 1991, functionality: fully functional, Weiler Praktikant 160 B, Year of manufacture: 1991, 3-axis digital display, Maximum turning diameter: 160 mm, Distance between centers: 650 mm, Spindle speed up to 2,500 rpm, Tailstock, Collet set, Chuck, Kdodpfx Ahszg Hvvo Eot 2 tool holders.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolroom Accuracy featuring NEW K&C 3-Axis Digital Readout! Technical Data: - Year of construction: 1989 Machine No.: 89-140-1471 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock MK 3 - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Spindle brake, selectable - Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: - NEW K&C 3-axis digital readout, 12 months manufacturer warranty and operating manual Functions: switch mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool library for 200 tools, taper calculation, radius/diameter indication, quick zeroing, count direction switching - NEW collet system with collets from 3 to 25 mm, 1 mm increments - Three-jaw chuck, 160 mm, with 1 set of jaws - Multifix size A with 2 tool holders - Face plate - Bed stop Kodpfxjymdyms Ah Esdt - Rear cover - Machine feet - Electronic spindle guard - Operating manual Safety features: Electronic spindle protection, lead and feed screw cover, 2 emergency stops, spindle brake, electronic change gear guard About the machine: For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This well-maintained lathe comes from a training workshop. All slides operate smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-like surface finishes. Take the opportunity to view and test this machine under power on site to verify its condition for yourself.

Condition: excellent (used), Year of construction: 1993, 1 used lathe with guide and draw spindle Manufacturer: Weiler Type: Praktikant 160 B Year of manufacture: 1993, with 3-axis digital display, very good condition, CE compliant Technical data: Center height: 160 mm Center distance: 650 mm Spindle speeds: from 24 to 2500 rpm Kjdpfx Aszq R Ecoh Eedt Spindle bore: 40 mm Short taper spindle head, DIN 55027, size 5, with bayonet lock Tailstock: MK 3 Feeds: from 0.02 to 0.63 mm/rev Possible threads: metric, inch, module, and diametral pitch Metric thread pitches: from 0.25 to 8 mm Weight: approx. 680 kg Spindle brake can be engaged Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and equipment: 3-axis digital display The machine comes from a vocational training center and is in very good condition.

Condition: used, Year of construction: 1999, turning diameter over bed 330 mm turning diameter over slide rest 195 mm turning length 750 mm center height over bed 160 mm centre distance 650 mm digital readout 3 Achsen HEIDENHAIN bed width 205 mm Kodjzy Sb Dspfx Ah Ejdt spindle bore 36 mm spindle taper KK5 DIN 55027 turning speed range 48 - 2500 U/min power requirement 3,0 kW 4-jaw-chuck diameter 160 mm quick change toolholder MULTIFIX Typ A taper in tailstock-quill MK 3 dia. of quill 40 mm quill stroke 100 mm voltage 400 V total power requirement 3,2 kW weight of the machine ca. 680 kg dimensions of the machine ca. 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable Kdodpfx Aszd Tycsh Est >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm Kjdpfx Ahswthbio Ejdt >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: used, Year of construction: 1993, Internal item no.: 26036 Lathe Weiler Praktikant 160B Year of manufacture: 1993 Centre height: 160 mm Centre distance: 650 mm Spindle speeds: 48–2,500 rpm Spindle bore: 40 mm The machine is equipped as follows: - 3-axis digital readout (Z0 display not working, likely scale is defective) - Multifix "A" toolpost - Drill chuck MK3 - 160 mm 3-jaw chuck Garant (including reversible jaws) - Steady rest - Various change gears - Operating manual / repair documents, etc. Condition: All gear stages shift smoothly. The main spindle runs very quietly, even at high speeds. The bedways have slight scoring. Dimensions (LxWxH): 180 x 90 x 170 cm Weight: approx. Kjdoy D N Daepfx Ah Eodt The machine is fully functional and can be inspected under power by arrangement at our premises, with over 500 m² of heated storage space.

Condition: excellent (used), Year of construction: 1994, turning diameter over bed 320 mm turning diameter over slide rest 190 mm turning length 650 mm turning speeds 3000 U/min spindle bore 40 mm tailstock quill taper MT MK3 weight of the machine ca. 1000 kg dimensions of the machine ca. 1800 x 900 x 1600 m Kjdszy D Amepfx Ah Eedt

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 4397, Ladies and Gentlemen, We are selling a Weiler Praktikant 160 AC lathe built in 1998 with original Weiler 3-axis digital readout. This newer version "AC" stands out above all due to the infinitely variable speed control, which makes working on the otherwise very user-friendly machine even easier. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Machine no. 4397 Year of manufacture: 1998 Center height: 160mm Center width: 650mm Spindle passage: Ø 40mm Spindle speed: 20-3000 rpm stepless Tailstock taper holder: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine Kdsdpjq H D U Esfx Ah Est - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Weiler Praktikant 160 AC Precision center lathe, 3-axis digital display, Weiler with AC drive, stepless speed control, CE marking!!!!! Technical data: >> Year of construction 1995, Machine No. 3820 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: up to 3000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 1000 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and equipment: Kedpfx Aoy Ulqweh Ejdt >> 3-axis digital display Weiler >> Quick-change toolholder system with toolholders from 2 to 28 mm, in 1 mm increments >> 3-jaw chuck 160 mm, new, with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic chip guard >> Machine feet >> Splash guard >> Bed stop For safety: Electronic chip guard for the main spindle, cover for the lead and feed screw, brake motor, 2 emergency stop switches, electrical safety switch for the gearbox About the machine: Offered is a Weiler Praktikant AC center lathe with lead screw and feed screw, year of construction 1995, in very good condition. A very nice lathe with AC drive and stepless speed control of the main spindle. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Weiler has a CE marking. The machine comes from a training workshop. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site while it is powered on and convince yourself of its condition.

Condition: good (used), Year of construction: 1992, Centre lathe WEILER Type: PRAKTIKANT 160 B, Year of manufacture 1992, equipped with 3-axis digital readout Heidenhain, 160 mm RÖHM chuck, Multifix B tool holder, tailstock with centre, collet clamping device with collets from 1 to 29.5 mm, coolant system. Turning diameter over bed: 320 mm Turning diameter over cross slide: 198 mm Turning length: 650 mm Spindle bore: 40 mm Spindle speed: 96 – 2500 rpm Ksdpfey Rpr Rsx Ah Ejdt Further data see machine card. Guideways are in good condition, machine documentation available.

Condition: used, Year of construction: 1992, gebraucht 1992 010190 prompt, Zwischenverkauf v 17900 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 0.2 - 4 150 mm 100 mm 40 mm 3 MK Kdodpfjyycwxsx Ah Est 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with various collets from 1 to 27 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2001, gebraucht 2001 010191 prompt, Zwischenverkauf v Deutschland 22100 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 80 - 2 Gänge/" 0.2 - 4 200 - 5 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm Ksdsyxxygjpfx Ah Eodt 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2011, gebraucht 2011 010192 prompt, Zwischenverkauf v Deutschland 24100 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 Kedpfxoyxxyao Ah Eodt 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 80 - 2 Gänge/" 0.2 - 4 200 - 5 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 720 kg Heidenhain 3-axis digital readout NEW Röhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 29 mm diameter (in 1 mm increments) Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, machine/vehicle number: 1717, Used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Kdedpfxouqb Eme Ah Est Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 pc 3-jaw chuck Ø160 mm, Chuck guard electrically interlocked, With Multifix toolpost size A with 3 holders Lever-operated collet device with 15 collets. The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing of the machine is possible by prior arrangement.

Condition: used, Year of construction: 1986, turning diameter over bed:320 mm turning diameter over slide rest:198 mm turning length:650 mm Ksdpfjufud Dex Ah Ejdt total power requirement:2,2 kW weight of the machine ca.:650 kg dimensions of the machine ca.:1700x1000x1700 mm :3 - Achsen - Digitalanzeige :Ø 40 mm :96 - 2500 U/min :A 2 - 5 :0,007 - 0,63 mm/U :metrisch 0,25 - 8 mm,Zoll 80 - 2 Gg/",Diametral - Pitch Gewinde 200 - 5 Dp,Modul 0,2 - 4 :MK 3 3-jaw chuck:160 mm mm :Typ B