Used Wafum Tud 40 X 1500 for sale (73,122)

Condition: good (used), Lathe WAFUM Type TUD 40 Centre distance: 1500 mm Todpfoyx Uv Dsx Acnjb Swing over bed: Ø 440 mm Centre height over bed: 220 mm Centre height over carriage: Ø 125 mm Spindle bore: Ø 56 mm Spindle speed: 18 - 1800 rpm, 36 steps Tailstock taper: MK 5 Drive power: 4 and 6.7 kW - Spindle speed via 2 motor speeds and 18 gearbox stages - Guide ruler for turning slender cones with automatic longitudinal feed Space requirement (L x W x H): 3100 x 1200 x 1450 mm Weight: 3000 kg Good condition

Condition: used, L + Z Lathe WAFUM Type TUD 40 Tsdpfx Acew Uf Hweneb Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: like new (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,650 mm, grinding diameter: 400 mm, We offer a new BUB40 x 1500 NC machine equipped with a MITSHUBISHI NC controller. The machine is still under lease with ING Lease. It has been thoroughly refurbished based on the TOS HOSTIVAR BUB 40 model by FAS GŁOWNO. Technical data: • Maximum workpiece diameter: 400mm • Maximum workpiece length: 1500mm • Centre height: 200mm • Distance between centres: 1500mm • Minimum grindable workpiece diameter with a 380 mm grinding wheel: 20mm • Tailstock quill stroke: 40mm • Maximum tailstock clamping force: 4000N • Spindle headstock centre taper: ISO 296-1991/Morse 5 • Tailstock centre taper: ISO 296-1991/Morse 5 • Maximum workpiece weight between centres: 500kg • Maximum workpiece weight in chuck (including chuck): 100kg • Machine width (with enclosure): 6650mm • Machine depth (with enclosure, without control panel): 2400mm • Machine height (with enclosure): 1850mm • Machine weight: 7000kg • Total power requirement: 38kVA Grinding spindle: • Standard grinding wheel dimensions: 500 x 80 x 203.2mm • Grinding spindle drive motor power: 11kW • Grinding spindle rated speeds (for 430 mm / for >430 mm and 500 mm wheels): 2000 / 1744 rpm Tsdpfx Aswzkywscnob • Grinding headstock traverse servo motor power: 2kW • Grinding headstock traverse servo motor torque: 9.5Nm • Maximum continuous X-axis traverse speed: 2m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum continuous X-axis traverse speed: 6m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum grinding wheel increment in INC mode: 0.1 mm • Table traverse servo motor power: 3.5 kW • Table traverse servo motor torque: 16.7 Nm Workpiece spindle: • Workpiece spindle speed range: 1 – 150 rpm • Workpiece spindle servo motor power: 3.5kW • Workpiece spindle servo motor torque: 16.7Nm More information available upon request via email or phone.

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V connected load 7,7 kVA Tedpfx Ajxp Rzbecneb With chuck, Multifix toolholder and digital readout.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, - turning length: 1500 mm - turning diameter over bed: 500 mm - turning diameter over the slide: 300 mm - spindle passage: 71.5 mm - tailstock sleeve travel: 180 mm Tsdpeq Hvaysfx Acnjb - rapid slide travel: - longitudinal: 5.6 m/min - transverse: 2.8 m/min - spindle speed range: 18-180 rpm - longitudinal travel range: 0.64-26 mm/rev. - transverse: 0.32-13 mm/rev. - stroke of pull screw: 6 mm

Condition: used, Used chamber filter press Andritz/Netzsch 1500x2000 with 125 plates Quantity: 2 available Press dimensions: Length: 13455 mm x Width: 3125 mm x Height: 4635 mm Empty weight: 51600 kg Tedpfozlb D Sjx Acnsb Filter area: 459 m2 Filter area after expansion: 559 m2 Press volume: 4989 l Press volume after expansion: 6080 l Cake thickness: 25 mm

Condition: used, Year of construction: 1977, functionality: fully functional, Headstock and bed lathe Manufacturer: Ravensburg Model: 1500 x 2000 mm Year of manufacture: 1977 Faceplate diameter: 1500 mm Center height in the saddle: 1000 mm Turning length: 2000 mm Simple tool holder: 90 mm high Tedpjzxgr Ujfx Acnob Upper support with automatic feed: 500 mm Upper support, transverse: 400 mm Support, transverse: 700 mm 3-way bed, width: 240; 150, 150 mm L x W x H: 6000 x 2300 x 2300 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 8,451 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66Te Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66Te graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards and only 8,451 hours. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66Te Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66Te graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in very good condition and has completed only 8,451 hours. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66Te Graphic CNC Control Hours: Only 8,451 hours Condition: Very good condition Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bending power: 40 tonnes Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Todpfezdak Ajx Acnob Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Delem DA-66Te graphic CNC control Euro-style top press brake tools Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2008, total length: 3,300 mm, total width: 1,800 mm, total height: 1,900 mm, overall weight: 6,000 kg, Working range Center distance: 1,500 mm Travel over bed: 570 mm Travel over cross slide: 340 mm Cross slide travel: 290 mm Bed width: 350 mm Spindle Spindle head DIN 55027 size 8 Spindle bore: 93 mm Speed range: 1–3,000 rpm Main drive: 20 kW AC motor Tailstock Quill diameter: 90 mm Quill stroke: 180 mm Mounting: MK 6 Feed Feed force X: 7,000 N Feed force Z: 10,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 10 m/min Machine Weight: approx. 3.6–3.9 t Dimensions: approx. 3,300 × 1,800 × 1,900 mm Equipment Heidenhain Manual Plus cycle control Heidenhain AC servo drives ZF two-speed gearbox (electrically switched) 3-jaw wedge bar chuck Ø250 mm Face plate Ø500 mm Fixed steady rest Tailstock with live center Multifix tool holder Parat 4-station turret Reinforced coolant pump Machine feet Todpsy S Ni Sofx Acnob Accessories Multifix tool holder package Various turning holders Measuring equipment / setting tools Steering ring Face plate Additional mountings and accessories Documentation available Typical dimensions (1,500 mm center distance version) Space requirement / dimensions approx.: Length: approx. 3,900 mm Width: approx. 2,000 mm Height: approx. 2,000 mm Turning length max.: 1,500 mm Turning diameter over bed: 570 mm Weight approx.: 6,000 kg Dimensions (LxWxH) approx.: 3300 x 1800 x 1900 mm Turning diameter via support: 340 mm Control: Heidenhain Manual Plus Year of construction: 2,008 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: Yes

Year of construction: 2013, condition: ready for operation (used), A CNC external cylindrical grinding machine Roweig requiring repair is available. Center height: 310mm, max. swing diameter: 600mm, max. grinding length: 1410mm, max. clamping length: 1500mm, max. grinding diameter: 600mm, max. workpiece weight: 500kg/120kg. Workhead speed: 500rpm, spindle taper: MT6, center point: MT5, swivel angle: -30°, tailstock cylinder compensation: +/-0.15mm, scale division: 0.001mm, max. dressing relief: 25mm, table speed: 10m/min, max. table travel: 1680mm. Wheelhead travel: 600mm, infeed speed: 10m/min. Grinding wheel dimensions X/Y/Z: 630mm/100mm/304.8mm, power: 11kW, max. speed: 50m/s, grinding spindles: 2, workpiece swivel angle: -30°/195°, spindle setting angle: -30°/15°. Machine dimensions X/Y/Z: approx. 5250mm/2450mm/2200mm, weight: approx. 7500kg, control: Siemens Sinumerik 802D sl. Spindle cooling defective. Documentation available. An on-site inspection is possible. Tsdpfx Aszmylqocnob

Condition: good (used), Year of construction: 2007, machine/vehicle number: 720050, Offer 26083 Technical data: - Center height / Distance between centers 210 / 1500 mm - Maximum turning diameter over the bed / over the cross slide 420 / 270 mm - Maximum turning diameter with gap bed 640 mm - Length of the bed bridge approx. 270 mm - Spindle bore 58 mm - Taper of the tailstock quill MK 5 - Travel of the tailstock quill 180 mm - Spindle speeds 45 - 1800 rpm - Feeds: - Longitudinal 0.031 - 1.70 mm/rev - Cross 0.14 - 0.784 mm/rev - Travel of the top slide 128 mm - Travel of the cross slide 285 mm - Metric thread pitches Tsdpfx Aezc Iycecneb - Inch threads - Drive 400 V / 7.5 kW - Including: - Tailstock, 3-jaw chuck, quick-change tool holder, - Digital display - Space requirement approx. W 2850 x H 1500 x D 1200 mm - Weight approx. 2000 kg

Condition: good (used), machine/vehicle number: 26041, Offer 26041 Technical data (approx.): Tsdpfjyvrx Rox Acnsb - Plate length approx.: 3000 mm - Plate width approx.: 2500 mm - Plate height without base frame approx.: 180 mm - Plate height with base frame approx.: 810 mm - Top plate thickness approx.: 115 mm - 11 T-slots in the table surface, length: 1500 mm - T-slot pitch in the table surface: 250 mm each - T-slot width approx.: 40 / 22 mm - T-slot depth approx.: 16 / 24 mm - Required space: L 3500 x W 2500 x H 1100 mm - Weight approx.: 4500 kg

Condition: excellent (used), Year of construction: 2012, Technical data: Todpoy U Ni Dsfx Acneb Maximum turning height: 250 mm Turning diameter over bed: 500 mm Turning diameter over support: 300 mm Distance between centers: 1500 mm Revolutions: 25 – 2000 RPM Spindle bore: 75 mm Digital position display: ACU-RITE Motor power: 11 kW CE marking Dimensions (length x width x height): approx. 3100 x 1450 x 1600 mm Weight: approx. 3 tons Accessories: 3 quick-change tool holders 3-jaw chuck 250 mm 4-jaw chuck 400 mm Rapid traverse Various tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2015, spindle bore: 105 mm, turning diameter: 710 mm, center height: 355 mm, turning length: 1,500 mm, Turning diameter in gap: 960 mm, SN 710S x 1500 Year of manufacture 2015 Acu Rite digital readout Machine lamp Coolant tank Tedjvq Ibxepfx Acnsb Longitudinal stop Rear chip guard Chuck guard

Condition: good (used), Year of construction: 1985, functionality: fully functional, spindle mount: MK 5, height adjustment type: mechanical, total width: 2,100 mm, total length: 900 mm, total height: 3,300 mm, overall weight: 3,000 kg, drilling capacity: 60 mm, clearance between the columns: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 20 rpm, spindle stroke: 400 mm, Radial drill BR 40/2 x 1250. Prod. Heckert (GER). Year 1985. Max drilling diameter in steel (mm) - 60 mm Max threading diameter in steel - M24 Tsdpfx Aowazbvocnjb Max workpiece height - 1100 mm Spindle stroke - 400 mm Arm length - 1250 mm Arm rotation - 360 Drill attachment - MK5 Rotation speed range (rpm) - 20-1200 rpm Feed range - 0.063-0.63 mm/rev Base plate mounting surface - 1400 x 800 mm Table dimensions - 650 x 650 x 500 mm Machine dimensions width x depth x height - 2100 x 900 x 3300 mm Motor power - 3.7 kW Weight - 3 tons

Condition: excellent (used), Year of construction: 2004, Technical data: Maximum turning height: 300 mm Maximum turning diameter over bed: 600 mm Maximum diameter over slide: 500 mm Distance between centers: 1500 mm CNC control: FANUC 21i-TB Revolutions: 16 – 4,000 RPM Spindle motor power: 18.5 / 30 kW 3-jaw chuck: 315 mm Tool changer: 12 stations CE marking Dimensions (length x width x height): approx. 6000 x 2300 x 2100 mm Weight: approx. 7.5 tons Accessories: 12-position tool turret Numerous tools Tjdpfoy Ub Ufjx Acneb Numerous driven tools Hydraulic chuck with additional jaws Tailstock W+W filter system Chip conveyor The seller is not liable for typographical or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CNC turning and milling center Okuma Multus B400 1SC-1500 Tjdpfxezwl U So Acneb Control system: OSP-P200L Year of manufacture: 11/2010 Internal machine number: 61 X-axis: 690 mm Y-axis: +115 / -115 = 230 mm Z-axis: 1,545 mm B-axis: up to 225°, positioning in 0.001° C-axis: 360° / 0.001° Turning length: 1,500 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 40 positions Equipment: - Chip conveyor - 3-jaw chuck SMW KNCS-N-340-117 - Paper band filter system ISF 540/6670 - One Touch IGF - Tailstock - Touch setter

Condition: new, Year of construction: 2025, Table size: 3500 mm x 1500 mm Pump operating capacity: -0.85 bar Reservoir tank: 100 l Vacuum pump: Becker Vacuum pump capacity: 40 m³/h Noise level: less than 70 dB Tedpomftlyofx Acneb Machine length: 3600 mm Machine width: 1650 mm Machine width (folded): 850 mm Weight: 480 kg

Condition: good (used), WMW HECKERT BR 40/2 x 1250 radial drilling machine Tjdozury Njpfx Acneb - Arm length: 1250mm - Maximum drilling diameter: 40mm - Morse taper: MK5 - Minimum speed: 20 RPM - Maximum speed: 1200 RPM - 3-speed gearbox with variable speed control - Dimensions of drilling head: (L x W x H) 710 x 710 x 500mm - Weight: 3000KG - Automatic feed - Dimensions (L x W x H): 2100 x 1000 x 2900mm

Condition: excellent (used), Year of construction: 1969, BHU 40/1500 TOS Hostivar Cylindrical Grinder Grinding diameter 400 mm Grinding length 1500 mm Maximum workpiece weight 300 kg Grinding wheel: 600 x 150 mm Longitudinal travel of the table (x-axis): 1 – 1790 mm Grinding head swivels +/- 45° Table swivels +/- 5° Spindle taper: Morse 5 Maximum rotational speed of the grinding wheel spindle: 1240 rpm / 2100 rpm Total power consumption: 22 kVA Machine weight: approx. 7000 kg Cooling system: none Accessories: none Tjdpfx Aozg H E Rocneb

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm Todpfx Aszwxcvecnsb With T-slots in both directions Weight: approx 2 T 3 same plates available.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, total height: 3,067 mm, total width: 3,413 mm, table width: 800 mm, table length: 1,700 mm, table load: 1,500 kg, overall weight: 14,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, product length (max.): 4,270 mm, number of axes: 3, This 3-axis KNUTH X-MILL 1500 CNC was manufactured in 2011. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 800 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1700 x 800 mm with a load capacity of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KNUTH X-MILL 1500 CNC vertical machining centre we have for sale. Contact us for further details. - Number of T-slots: 5- T-slot Width: 22 mm- T-slot Spacing: 135 mm- Spindle Nose to Table Surface Distance: 170-870 mm- Throat Depth: 800 mm- Spindle Speed Range: 60-8000 rpm- Spindle Taper: MAS BT 50- X-axis Rapid Feed Rate: 15000 mm/min- Y-axis Rapid Feed Rate: 15000 mm/min- Z-axis Rapid Feed Rate: 10000 mm/min- Working Feed Rate: 5-5000 mm/min- Tool Changer Capacity: 24 positions- Positioning Accuracy: ±0.01 mm / ±0.00039"- Repeatability Accuracy: ±0.005 mm / ±0.0002"- Main Drive Motor Power (continuous / 30 min): 15 / 18.5 kW (15 / 25 Hp)- Total Power: 18.5 kW- Voltage: 400 Volt- Frequency: 50 Hz / 3 Phases Technical Specification Taper Size BT 50 Tjdpfeziaggex Acnob

Condition: as good as new (ex-display), Year of construction: 2023, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1200 mm column arm 200 mm ram stroke speed 60.0 mm/sec return speed 80. mm/sec work speed 60.0 mm/sec work stroke 100 mm table height 760 mm table width 150 mm oil volume 130 ltr. voltage 400 Volt Control ESA E21 Tedpfx Acoxabumjnsb total power requirement 4.0 kW weight 3030 kg range L-W-H 2050 x 1800 x 2030 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swing diameter over cross slide 270 mm Swing diameter in bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle head CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tsdpoy Duy Hsfx Acnjb Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kgs Machine dimensions: 2700 x 1080 x 1370 mm Accessories - 3-axis DRO system - 3-jaw chuck - 4-jaw independent chuck - Faceplate - Steady rest - Traveling rest - Wrenches - Cooling water equipment - MULTIFIX knife holder with inserts - Tool case - Tools, wrenches - Cutting tools - Manuals and CD The lathe is in near-new condition and has hardly been used. It is powered up in our workshop.

Condition: excellent (used), Year of construction: 1997, I sell the press for veneer and foil ORMA NPC-30 4-40 2500 x 1200. Tedpsu E E A Tefx Acnjb Product size max. 2500 x 1200mm Oil heating. Total power 21,7 KW at maximum. Very good condition. Available immediately.