Used Voxeljet 3D Printer for sale (4,110)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, printer was rarely used at university which does not use it any more Kjdpfjw Inrcsx Ah Esdt

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Kjdpew Inpnjfx Ah Ejdt

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SN24027024146, Year of construction: 2024, total length: 580 mm, total height: 910 mm, total width: 700 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Installed nozzle diameter: 0.4 mm MACHINE DETAILS Voltage supply: 100–240 V AC Power consumption: Max. 10 A Ksdpfezx S Eaox Ah Eodt Mains frequency: 50–60 Hz Frequency band: 2,400.0–2,483.5 MHz Max. radio frequency output power: < 100 mW EIRP WLAN standard: IEEE 802.11 b/g/n Operating temperature: 18 °C for PLA up to 38 °C Max. humidity: Max. 85 %, non-condensing Dimensions & Weight Dimensions (W x D x H): 580 x 700 x 910 mm Weight with packaging: Max. 35.0 kg Weight without packaging: Max. 25.3 kg EQUIPMENT Satin powder-coated print bed PEI print bed Spool holder with material guide Power cable USB drive 5 × brass nozzle, 0.4 mm 5 × hardened nozzle, 0.6 mm Operating manual Testing information Note: Print head cable 3 must be replaced.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, total length: 495 mm, total height: 520 mm, total width: 457 mm, construction height: 300 mm, construction width: 240 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Build volume X-axis: 330 mm Build volume Y-axis: 240 mm Build volume Z-axis: 300 mm Filament diameter: 2.85 mm Nozzle diameter: 0.25 mm, 0.4 mm, 0.8 mm Printing speed: < 24 mm³/s XYZ resolution: 6.9 / 6.9 / 2.5 µm Layer resolution with 0.25 mm nozzle: 60–150 µm Layer resolution with 0.4 mm nozzle: 20–200 µm Layer resolution with 0.8 mm nozzle: 20–600 µm MACHINE DETAILS Technology: Fused Filament Fabrication (FFF) Print head: Dual extrusion print head with automatic nozzle lift system and interchangeable print cores Supported materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway Operating temperature: 15–32 °C Relative humidity during operation: 10–90 % RH, non-condensing Non-operating temperature: 0–32 °C Supplied software: UltiMaker Cura, Cura Connect Supported operating systems: macOS, Windows, Linux Plugin integration: SolidWorks, Siemens NX Supported file types: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, UFP Connectivity: WLAN, LAN, USB Display: 4.7 inch (11.9 cm) color touchscreen Monitoring: Live camera Operating noise: 50 dBA Build plate temperature: 20–140 °C Build plate leveling: Active leveling Nozzle temperature: 180–280 °C Nozzle preheating time: < 2 min Kjdpjzx S D Aefx Ah Eedt Build plate preheating time: < 4 min from 20 °C to 60 °C Power consumption: 500 W Dimensions & Weight Machine dimensions: 495 × 457 × 520 mm Machine dimensions with Bowden tubes and spool holder: 495 × 585 × 780 mm Net weight: 20.6 kg Shipping weight: 29 kg Shipping carton dimensions: 650 × 600 × 700 mm FEATURES Dual extrusion print head Automatic nozzle lift system Interchangeable print cores Heated glass build plate Heated aluminum build plate PEI build plate Active build plate leveling Abrasion-resistant dual-gear feeder NFC scanner for material recognition Color touchscreen Live camera Spool holder with material guide Print Core AA 0.4 mm, 2 pieces Print Core BB 0.4 mm, 1 piece Nozzle cover, 3 pieces Power cable User manual CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 495 mm, total height: 780 mm, total width: 585 mm, overall weight: 17 kg, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be arranged by the buyer! The unit will be available from October 2026! TECHNICAL DETAILS Build volume X-axis: 230 mm Build volume Y-axis: 190 mm Build volume Z-axis: 200 mm Layer height: 0.06–0.4 mm Build plate: Heated glass plate Build plate temperature: up to 120 °C Filament diameter: 2.85 mm Nozzle temperature: up to 280 °C Print speed: up to 150 mm/s Material flow: up to 24 mm³/s Compatible Print Cores: AA 0.4; BB 0.4; AA 0.25; AA 0.8; BB 0.8; CC 0.4; CC 0.6; DD 0.4 MACHINE DETAILS Technology: Fused Deposition Modeling (FDM) Software Print preparation: UltiMaker Cura, Cura Cloud Printer management: UltiMaker Digital Factory Supported operating systems: Windows, macOS, Linux Environmental conditions Operating temperature: 15–32 °C Operating humidity: 10–90 % RH, non-condensing Storage temperature: 0–32 °C Non-operating humidity: 10–90 % RH, non-condensing Placement: Away from direct sunlight Power supply: 100–240 V AC Mains frequency: 50–60 Hz Power consumption: 350 W Operating noise: < 50 dB(A) Connectivity: WLAN 2.4 GHz, LAN, USB Monitoring: HD camera Dimensions & Weight Dimensions: 495 × 585 × 780 mm Net weight: 14.4 kg Weight in operation: approx. 17 kg EQUIPMENT Dual-extrusion print head Automatic nozzle lifting system Interchangeable Print Cores Dual-gear feeder Filament flow sensors Dual spool holder with NFC detection Color touchscreen Kdedpezx S Dvsfx Ah Eot HD camera Heated glass plate PEI print bed Spool holder with material guide Power cable Ethernet cable USB stick User manual CE marking Print Core AA 0.4 – 2 pieces Print Core BB 0.4 – 1 piece Nozzle cover – 3 pieces

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 1,332 h, construction height: 180 mm, construction width: 220 mm, No minimum price—guaranteed sale to the highest bidder! Markforged Metal X TECHNICAL DETAILS Printing process: ADAM – Atomic Diffusion Additive Manufacturing Build volume: 300 × 220 × 180 mm Max. part size: 250 × 183 × 150 mm Max. part weight: 10 kg Layer height after sintering: 50 µm and 125 µm MACHINE DETAILS Supported materials: Copper, 17-4PH stainless steel, Inconel 625, H13 tool steel, D2 tool steel Print chamber: heated Print bed: heated, vacuum-sealed print plate, automatic print bed leveling Printing system: two nozzles for metal material and release material Kdsdpfjzx Rkbsx Ah Est Dimensions & Weight Dimensions: 575 × 467 × 1,120 mm Weight: 75 kg Power supply: 100–120 / 200–240 V AC Current consumption: 12 / 6 A Connection: IEC 60320 Type C20 Operating hours: 1,332 h EQUIPMENT Markforged Wash-1 Debinder Markforged Sinter-1 Sintering System Markforged Wash-1 TECHNICAL DETAILS Debinder Supported materials: all metals Cleaning media: Opteon SF79, Opteon SF80, or Tergo Metal Cleaning Fluid Control: integrated control system Workpiece holder: Stainless steel basket Washing area: 356 × 254 × 203 mm Washing volume: 18,356 cm³ MACHINE DETAILS Power supply: 110–120 V AC, single-phase Current consumption: 11 A Peak power consumption: 1,320 W Dimensions & Weight Dimensions: 609 × 685 × 1,067 mm Weight: 136 kg FEATURES Integrated control system Stainless steel basket Shut-off at low fluid level Shut-off at high vapor pressure Markforged Sinter-1 TECHNICAL DETAILS Furnace specifications Supported materials: chemically debound parts printed with Metal X Heating element: Kanthal Control: preprogrammed automatic cycle control Sintering cycle: 26 h Max. internal temperature: max. 1,300 °C Sintering capacity: 141 mm inner diameter × 305 mm length Sintering volume: 3,020 cm³ Sintering surface area: 348 cm² for a ceramic setter plate Setter plate dimensions: 11.4 × 30.4 cm Process gases: argon, argon-hydrogen mixture Retort: high-purity, carbon-free refractory retort MACHINE DETAILS Exhaust air requirement: 100–150 CFM, external exhaust Power supply: 200–240 V, single-phase Current consumption: 30 A Recommended circuit breaker rating: 50 A Dimensions & Weight Dimensions: 1,270 × 510 × 720 mm Weight: 136 kg FEATURES Pre-programmed automatic cycle control Kanthal heating element Ceramic setter plate High-purity, carbon-free refractory retort

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 8000, Year of construction: 2020, total length: 1,158 mm, total height: 1,788 mm, total width: 882 mm, type of input current: three-phase, overall weight: 400 kg, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 296 mm, feed length Y-axis: 296 mm, feed length Z-axis: 296 mm, wire diameter (max.): 1.75 mm, Equipment: CE marking, emergency stop, Used 3ntr Spectral 30 3D printer, from a demo center Availability: immediate Origin: showroom, used only for demo purposes. The SPECTRAL 30 is a high-performance FDM printing system for ultra-polymers such as PEEK, PAEK, Ultem 9085, Ultem 1010, PPS, and other standard filaments including ABS, ASA, and NYLON. 4 extruders up to 500°C, 0.4mm nozzles for 1.75mm diameter filaments, with the option to perform annealing in the printing chamber. In impeccable condition, coming from a showroom and used only for demonstration purposes. The machine is perfect, ready for operation, and available for any testing or inspection. It is supplied with its wooden crate. Kedpfx Ajzzw Ryjh Eodt Technical specifications Technology: FDM Heated chamber up to 250°C + 4 integrated ventilation units (desiccators) Printing area: 296 x 296 x 296 mm Connections: Ethernet Calibration system: automatic Weight: approximately 400 kg Power supply: 380 V

Condition: refurbished (used), functionality: fully functional, Year of construction: 2013, total length: 2,868 mm, total height: 2,102 mm, total width: 1,960 mm, overall weight: 2,200 kg, Hello, we are selling several 3D printers from an insolvency estate. All are professional-grade devices from the automotive development and design sector. This listing features the Stratasys Objet 1000 / J4100 from 2013. The printer underwent a mechanical overhaul by Stratasys in 2025 and was updated to the latest standards electronically and in terms of software. This upgrade cost approximately EUR 135,000. Accessories such as a replacement print bed with a mobile lifting frame and various spare parts are included. Consumables can be purchased additionally at a favorable price. This is a stereolithography printer, meaning liquid resin is cured using UV/laser technology, creating the component layer by layer with extremely high detail, precision, and excellent surface quality. Thus, it is an absolute professional-grade device that can, for example, print multi-colored automotive lights with a clear glass appearance. A new device in this print volume size currently costs well over EUR 350,000 (net). Technical data: Build volume/build size max: 1,000 × 800 × 500 mm Layer thickness up to 27 microns High speed: up to 3 base resins, 27 µm resolution Super high speed: 1 base resin, 55 µm resolution PolyJet UV technology 110–240 V Dimensions: 2,870 x 1,960 x 2,105 mm Weight: 2,200 kg The price is ex works; we can arrange loading. Kdodpfx Ahez Ahq Ts Eet We also offer worldwide shipping and the necessary customs documents, for an additional fee. The device can be inspected at our warehouse. Price includes VAT; invoice with VAT shown separately. !! Sale only to business customers, without warranty, no guarantee, no exchange, sold as is. Further description from the manufacturer: Create large or small production tools and full-size prototypes. Maximize your productivity and achieve a quick ROI with the Stratasys J4100™ 3D printer. Its multi-material capability, high throughput, and extra-large build platform enable faster, smarter, and more precise workflows. Thanks to PolyJet Technology™, this powerful system enables engineers, manufacturers, and designers to 3D print any design – no matter how complex or detailed. The size of the parts is irrelevant: the J4100 prints both large and small prototypes with equal precision. Print large parts with a length of over a meter in a single print job. This eliminates the need to split large CAD files and later assemble the parts. Print many parts in a single print job and benefit from competitive unit costs. The reliable and user-friendly J4100 enables you to produce parts that are ready for use with minimal or no post-processing. The support material can be quickly removed with a water jet, and for most applications, the smooth, multi-material parts do not require polishing or painting.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10369, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Kdodpoz Dgfvsfx Ah Ejt Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, Used ProJet SD6000 3D printing machine using stereolithographic technology. The machine has had extremely low hours usage during its life so far, having been installed and minimally utilised from time to time for research projects at the University of Sheffield AMRC research department known as the “Factory of the Future”. Serial # 10311178101 Year 2014 MACHINE CONSTRUCTION & FEATURES The ProJet 6000 HD SLA 3D provides SLA quality in a compact footprint and is a printer which puts the unmatched capabilities of Stereolithography 3D printing technology, fine-tuned for cost-efficiency and unrivalled material availability, into a smaller footprint. 3D Printed SLA parts with unrivalled accuracy and surface finish. High Flexibility 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. • Two build platforms • One material delivery cart • Projet TM6000 Print tray • Washing Unit • Curing Unit 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. Print modes: High Definition, Ultra High Definition Resolution: (HD) 0.125mm, 0.125mm layer. (Ultra-high definition): 0.125mm, 0.10mm layer. Net construction volume: (short) 250 mm x 250 mm x 50 mm (medium) 250 mm x 250 mm x 125 mm, (tall) 250 mm x 250 mm x 250 mm. Accuracy: 0.025 – 0.05 mm per 25.4 mm of part dimension. BENEFITS: Stereolithography technology (SLA) Max build envelope capacity (W x D x H): 250 x 250 x 250 mm (10 x 10 x 10 in). Highest precision and accuracy Exchangeable Material Delivery Modules (MDMs). Utilizing two laser spot sizes per layer – no compromise between speed or feature detail. True line drawing in X and Y to accurately define curves. Kjdetvfwkopfx Ah Ejdt Industry-leading 3D Sprint software for file preparation and production. Cloud connectivity for predictive and prompt service with 3D Connect.

Condition: repair required (used), functionality: unexamined, machine/vehicle number: 0011, Year of construction: 2013, total length: 2,000 mm, total height: 2,130 mm, total width: 1,820 mm, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, electrical fuse: 16 A, table width: 400 mm, table length: 500 mm, space requirement length: 7,500 mm, space requirement height: 2,700 mm, space requirement width: 6,500 mm, Voxeljet VX500 industrial 3D printing system, manufactured in 2013, serial number 0011. Build volume: 500 × 400 × 300 mm. Overall machine dimensions: approximately 2000 × 1820 × 2130 mm. Weight: approximately 1200 kg. Electrical supply: 400 V, 50 Hz, three-phase, nominal current 7.8 A, fuse 16 A. The main printhead assembly is missing. The machine has not been tested and is offered as-is for repair, refurbishment or spare parts. Kdsdpfx Ahez Davbs Eot The package includes Voxeljet VRS500, VCL1400, auxiliary extraction and filtration equipment, binder/chemical storage equipment, oven, wax bath and other accessories. Exact inventory to be confirmed. Located in a Turkish Free Zone. Export and customs formalities to be arranged by the buyer.

Condition: new, Year of construction: 2026, New LETTERBERG X2 3D printer for producing channel-letter bodies, dimensional lettering and custom logo components for signage. The machine has a 900 x 900 mm build area and a maximum build height of 120 mm. Printed channels can be combined with separately cut acrylic faces, backing panels and LED lighting to produce completed illuminated signs. Technical specifications: - Build volume: 900 x 900 x 120 mm - Filament feeding: two filaments into one nozzle - Layer height: 0.2 mm or 0.3 mm - Maximum nozzle temperature: 260 degrees C - Maximum build plate temperature: 80 degrees C - Automatic bed levelling - Automatic pause when filament runs out Kdjdpfx Ahjz A Syvj Ejt - Rated extrusion capacity: up to 31 mm3/s - Machine dimensions: 1,385 x 1,250 x 850 mm - Machine weight: 132 kg - Print file format: G-code Applications include channel-letter bodies and logo components for retail, hospitality, healthcare and commercial signage. Production output depends on the material, geometry and print settings. Please send an enquiry for a quotation and details of the offered configuration.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 12,655 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, laser power: 70 W, EOS P396 laser sintering system, built 2017, 12,655 laser hours. The machine is operational and located in the Netherlands, available immediately. It last produced a full validation build in April 2026. Photos and video of that build are available on request, and the parts speak for themselves. Included in the sale EOS P396 machine with switchgear cabinet 2x exchangeable build frames Laser chiller (air/water) PA2200 Balance material licence Touchscreen control terminal Lenovo P3 Ultra workstation, Intel Core Ultra 9, 32 GB, Windows 11, installed 2025 Kedpfxsz A Syce Ah Esdt Technical Process: SLS, polyamide Laser: 70 W CO2 Build volume: 340 x 340 x 600 mm Software: PSW 3.8 Supply: 400 V, three phase Condition The original control PC failed in 2025 and was replaced with a new Windows 11 workstation, so the control side of this machine has years left in it. It currently runs a touchscreen; the original EOS console and monitor are in storage and can be supplied instead if you prefer the factory configuration. The machine has been maintained throughout its life by EOS and by our own technicians. At the last annual EOS service the laser measured 68.1 W on a 70 W laser, with beam alignment and calibration confirmed. Full EOS service documentation is available to serious buyers. Terms Sold as-is, where-is, ex works. Buyer arranges rigging, crating, transport and insurance. Payment in full before collection. Viewing The machine is in storage and can be viewed by appointment. If you want to see it running, we can recommission it at our facility in Utrecht by arrangement.

Condition: excellent (used), functionality: fully functional, operating hours: 560 h, The Massivit 1800 is an industrial large-format 3D printer designed for producing full-scale prototypes, displays, molds, scenic elements, and large composite tooling. It uses Massivit's proprietary Gel Dispensing Printing (GDP) technology rather than conventional FDM or SLA processes. Fully functional, in production. Demo possible upon request. 560 hours printed only! Location: Europe Double printhead version. Price includes decommissioning and loading on truck. Installation and training available. Permanent software license Manufacturer Company: Massivit 3D Printing Technologies Model: Massivit 1800 Core Specifications Specification Value Printing Technology Gel Dispensing Printing (GDP) Kedpfxozcv S Hj Ah Ejdt Build Volume (W×D×H) 1.17 × 1.50 × 1.80 m Maximum Part Weight 150 kg Z-axis Productivity Up to 35 cm/hour Linear Print Speed Up to 300 mm/s Material Dimengel UV-curable photopolymer File Format STL Machine Footprint 3.1 × 2.2 × 2.8 m Machine Weight 2,500 kg Electrical Requirement 380–400 VAC, 3-phase, 32 A Power Consumption ~10 kW during printing Air Supply 6–8 bar compressed air Operating Temperature 16–30 °C Compliance CE For further technical and commercial information, please refer to enclosed brochure.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 1,000 mm, total height: 500 mm, total width: 500 mm, overall weight: 550 kg, input voltage: 230 V, warranty duration: 12 months, input current: 16 A, electrical fuse: 16 A, feed length X-axis: 1,000 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, power: 3.2 kW (4.35 HP), BigRep STUDIO G2 – Large-format industrial 3D printer | serviced | PEI | AI monitoring | 12 months support For sale is a BigRep STUDIO G2 industrial large-format FDM 3D printer from our machine inventory. The machine will not be sold in an "as is" condition without inspection. Before handover, the printer will be fully technically inspected, serviced, and prepared for production by us. Special advantage: Technical support is provided by ThinkBig3D, which has many years of BigRep service experience. I myself worked for several years as a service technician directly at the manufacturer BigRep and continue to provide professional support for BigRep systems. Included in the purchase price: BigRep STUDIO G2 Complete technical inspection and maintenance before handover PEI switch plate including magnetic base Kedpszz In Aofx Ah Esdt PrintShield AI-based print monitoring Machine commissioning at the buyer's location Operator and user training 12 months of technical service & support from ThinkBig3D Support for setup and production start-up Technical data Manufacturer: BigRep GmbH Model: STUDIO G2 Year of manufacture: 2019 Manufacturing process: FFF/FDM Build volume: 1,000 × 500 × 500 mm Voltage supply: 230 V Fuse rating: 16 A Power consumption: approx. 3.2 kW Machine weight: approx. 550 kg The STUDIO G2 is particularly suitable for the production of large-format prototypes, jigs, models, molds, functional parts and small series. Typical areas of application include automotive, machine and plant engineering, model and mold making, architecture, research & development, marine/boatbuilding, as well as art and design. PEI Switchplate The machine will be equipped with a PEI switchplate. This system facilitates the removal of components and provides a reliable printing surface for professional use. PrintShield – AI-based print monitoring In addition, the machine will be equipped with our self-developed PrintShield system. Using cameras and AI-based monitoring, ongoing printing processes can be monitored, and typical printing errors or anomalies can be detected. This provides additional process reliability, especially for large-format components and multi-day printing jobs. Commissioning & training included As part of the handover, training for the operating personnel will also be provided. Topics covered include machine operation, print preparation, material handling, print bed/PEI switchplate, basic process parameters, maintenance and care, troubleshooting, and the use of PrintShield. 12 months service & support The purchase price includes 12 months of technical service and support from ThinkBig3D. This ensures that the buyer has a contact person with extensive BigRep experience even after the machine handover. The machine can be inspected and demonstrated in Berlin by appointment. A test print is also possible after prior consultation. Price: €27,900 net plus statutory VAT – negotiable Sale by ThinkBig3D. Transport or delivery can be arranged upon request. Note regarding the images: Some of the product images used have been digitally retouched for better representation and may contain AI-generated content. The machine actually offered is shown in the original images. The technical specifications and described equipment features refer to the machine that is actually for sale.

Year of construction: 2019, condition: excellent (used), BEAM MODULO 400 Year Mfg 2019 Siemens Control Build Volume: Approximately 650 × 400 × 400 mm (or roughly 600 × 400 × 400 mm operational) with continuous 5-axis motion kinematics Laser Source: Ytterbium fiber laser options ranging from 500 W up to 2 kW Deposition Heads/Nozzles: Supports an automatic tool changer to swap between different heads (e.g., the 10Vx for fine precision down to 0.1 mm and the 24Vx for higher deposition rates) without stopping production Powder Delivery: Equipped with a vibrating multi-hopper powder feeder Kedezvlhpspfx Ah Eodt system capable of managing up to 4 or 5 separate material feed options

Condition: used, functionality: fully functional, Year of construction: 2023, total length: 584 mm, total height: 483 mm, total width: 914 mm, overall weight: 48 kg, We are offering our two 3D printers, both in full working order and in good condition. These units are only being sold together. Markforged Onyx Pro – Professional Composite 3D Printer: Total weight: 48 kg Dimensions: 584 x 330 x 355 mm Printing technology: Fused Filament Fabrication (FFF) + Continuous Fiber Reinforcement (CFR) Build volume: 320 x 132 x 154 mm Print bed: Kinematic coupling, accuracy up to 160 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fiber for reinforced components Laser-assisted calibration: automatic leveling Layer height: 100 µm (standard); up to 250 µm Materials: Onyx (Nylon/Carbon), Precise PLA, Smooth TPU Tensile strength: approx. 590 MPa (significantly higher than ABS) Software: Markforged Eiger (Cloud) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 6,236 h Markforged X5 – Industrial Composite 3D Printer: Kedoy Rq Hispfx Ah Ejdt Weight: 48 kg Dimensions: 584 x 483 x 914 mm Printing technology: Fused Filament Fabrication (FFF) + Continuous Fiber Fabrication Build volume: 330 x 270 x 200 mm Print bed: Kinematic coupling, accuracy up to 80 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fiber for reinforced components Laser-assisted calibration: automatic leveling Layer height: 100 µm (standard); down to 50 µm (minimum); up to 250 µm (maximum) Materials: Onyx, Onyx FR, Onyx ESD; glass fiber, Precise PLA, Smooth TPU Software: Markforged Eiger (Cloud) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 11,822 h Both machines are used and fully functional. Application areas: Functional parts, prototypes, end-use parts, tools, and fixtures for automotive, aerospace, medical technology, mechanical engineering, and defense. Scope of delivery: Standard Eiger software, power supplies, basic materials, toolkits. Optional addons available on request. Location on request! Collection or transport can be arranged.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 500 h, input voltage: 230 V, input current: 15 A, input frequency: 60 Hz, We are offering this very well-maintained Z Corporation ZPrinter 650 3D printer, manufactured in 2015, for sale. Voltage: 100/115/230 V Current: 15/15/8 A Frequency: 50-60 Hz We are a workshop for people with disabilities and are selling the printer because we no longer have the demand for the products it produces. The printer has been used very little and is therefore in very good condition. If you have any questions or require further information, please feel free to send us a message or call us. Ksdezzk Ufopfx Ah Ejdt

Condition: good (used), Year of construction: 2017, 3D Printer ORLAS CREATOR SLM250, MFG 2017,-the equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component, SN: SLM250172801 makes complex parts, using metallic or non-metallic powders; wireless controller; benchmark dimensions achieved: 100 x 100 mm; gas used as protective atmosphere: argon/nitrogen; layer size: 20-100 micrometers; laser type: Yb Fiber Laser 250 W; wavelength: 1070 nanometers; Precision F-Theta lenses; dimensions: 717x858x1794 mm; mass: 470 kg; specific software: Creator user interface, APP Suite application "3D printing"; IMPORTANT: The equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component; Specifications Building volume: ø = 110 mm x 100 mm Powder reservoir volume: ø = 110 mm x 200 mm High power 250W cw Yb: Fibre laser Wave length: 1070 nm High efficiency Exceptional beam quality and power stability Air cooled Spot size: 40 µm - 120 µm Process chamber • High-end process chamber, suitable for low-oxygen process environment • Recommended inert gas: Argon / Nitrogen • included extraction unit for cleaning of the process environment (max. flow rate: 190m³ / h) Coating system - 360° circulating coater for high efficient coating process - Rubber coating blade - Micrometre screws for optimum coater alignment User interface - 12’’ Microsoft Surface Pro 3 tablet controller - Unique wireless control concept - Easy control of all printing parameters - Cloud manufacturing concept Dimensions - System dimensions: 717 mm x 858 mm x 1794 mm - Machine opening: 450 mm x 180 mm - Power supply: (V/Ph/Hz): 230/1/50 - Power setting: max. 10 A - Weight: 430 kg CAD / CAM Software APP SUITE, including 3D printing application - solid slicing of 3D objects - extended repair functionality of 3D parts - automatic generation of support structures Kdjdpounaqvefx Ah Eet - complete control of all printing strategy Parameters Welcome Package - - APP SUITE Software Basic Package - - Accessories Zero-Point Clamping System - - Adjustment aid for aligning the construction platform - - Hose adapter for inert gas supply 6mm to 1/4inch - - Cleaning cloths and optics cleaning liquid - - ESD brush for safe system and component cleaning - - Allen key set - - Stainless steel shovel Price Euro 38,900 Euro + VAT, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: defective spare-parts repository (used), functionality: not functional, machine/vehicle number: 2117506, Year of construction: 2021, input voltage: 230 V, input frequency: 60 Hz, Device data: Model: VSHAPER 500 PRO (VS-50-PRO) Version: G2.0 Year of manufacture: 2021 Serial number: 2117506 Origin: Made in EU Connection voltage: 230 V ~ 50/60 Hz Condition: Defective - cause of fault unknown Kdedpozzcg Hjfx Ah Eet Technical highlights: Dual extrusion with 4 print heads (LT + HT) for a wide range of materials High-temperature capable up to 420 °C - suitable for technical plastics Wide print head compatibility: V-JET, V-PREC-SINGLE, V-PREC-S-MED series Original purchase value (2021): approx. €41,041.00 net Other: The device was acquired and put into operation as a demonstration machine in September 2021. The originally included 1-year manufacturer's warranty (V-SERVICE SILVER) has expired.

Condition: used, functionality: limited functionality, Year of construction: 2013, operating hours: 5,400 h, Stratasys Objet Connex 500 industrial multi-material PolyJet 3D printer available for sale in the UK. The machine has approximately 5,400 operating hours and powers up successfully. When inspected, the machine was not displaying print-head errors. The printer has not recently completed a test print because the printing materials/resins currently installed have expired. We are therefore selling the machine transparently as requiring recommissioning and fresh materials before full production operation can be confirmed. Ksdpfxozy Rwqs Ah Esdt The Connex 500 is an industrial PolyJet additive manufacturing system designed for professional prototyping and multi-material applications. Its large build platform and ability to work with different material characteristics made the Connex range particularly suited to engineering, product development and prototype production. The machine was removed from a commercial environment and is now surplus to requirements. Known condition: Powers up successfully Approximately 5,400 operating hours No print-head errors observed during inspection Existing resin/material is expired Full print cycle has not been tested with fresh material Offered in its present condition Inspection welcomed prior to purchase This could represent a good opportunity for an existing Stratasys/Objet user, specialist reseller or refurbishment company familiar with the Connex platform. The machine is located in the United Kingdom. Further photographs and a video showing the machine powered on can be supplied on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, • Realistic simulation of end products through the combination of different materials • Multi-material parts: Simultaneous application of different modeling materials • Mixed Tray: Production of various parts made of different materials in a single process step • Wide selection of FullCure® and composite materials: Photopolymer for model and support materials; dynamically generated Digital Materials™ • Numerous design and printing processes • Greater creativity through the use of multiple materials and composites with different material properties and color shades • Highest quality and accuracy • High-resolution 16-micron layers guarantee smooth surfaces and fine details • 350x350x200 mm large build platform for the production of various parts and assemblies • Suitable for use in an office environment TECHNICAL DATA - Layer thickness (Z-axis): up to 0.016 mm - Build platform (X x Y x Z): 350 x 350 x 200 mm - Build volume (X x Y x Z): 342 x 342 x 200 - Resolution X = 600 dpi, Y = 600 dpi, Z = 1600 dpi - Printing modes Digital Material (DM): 0.03 mm High Quality (HQ): 0.016 mm High Speed (HS): 0.03 mm - Accuracy: 0.1 - 0.3 mm typical - Model materials FullCure 720, universally applicable and transparent Vero, opaque material DurusWhite, polypropylene-like material Tango, rubber-like elastic material Kodpfezw Emhex Ah Eedt ACCESSORIES Spare parts new replacement print head (new price approx. €1,000)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 33234, Year of construction: 2013, Stratasys Objet 260 Connex – Professional 3D Printer Kodpfx Ahjyag Imo Ejdt For sale: Stratasys Objet 260 Connex 3D printer, year of manufacture 2013. The machine comes from a professional environment and is suitable for applications such as prototyping and product development. Optional accessories are negotiable. Further information available upon request.

Condition: used, Year of construction: 2022, total length: 400 mm, total height: 450 mm, total width: 400 mm, overall weight: 20 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 400 x 400 x 450 mm Weight: approx. 20 kg Kodpszwn Tksfx Ah Eodt The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The technical data provided is based on the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: used, machine/vehicle number: FPR4012012202007256, Year of construction: 2022, total length: 800 mm, total height: 450 mm, total width: 600 mm, overall weight: 30 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Onyx filament: 800 cm3 Fiberglass filament: 50 cm3 MACHINE DETAILS Dimensions & Weight Transport dimensions: approx. 800 × 600 × 450 mm Transport weight: approx. 30 kg EQUIPMENT Markforged EIGER Software Cloud Online Version Markforged EIGER Software Desktop Online Version Early access to new features 3 × FFF quick-change nozzle 3 × CFF quick-change nozzle Markforged Drybox for material storage The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. This fee must be paid before collection. Ksdpfx Aozwn Tdeh Eodt The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.