Used Veolia Midi-Ro 10-750-Ep for sale (44,567)

Condition: new, Year of construction: 2010, functionality: fully functional, new, unused water treatment system (new in the original packaging) VEOLIA MIDI-RO 10-750-EP Fpjdpfszdri Nex Akysn year of manufacture 2010 500 liters/hour energy-efficient reverse osmosis system

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Fodpfxjzvddce Akyepn

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G5-M030-13-2V-R10-15, total length: 7,200 mm, total height: 2,700 mm, input voltage: 400 V, total width: 2,700 mm, Technical Specifications Brand: Schraml Model: TopDRILL M-RX 130 Roto-10 Year: 2015 Direction of rotation: Right to left Condition: As is (Very good condition) Fjdpfxoz A D H Uj Akyjpn Parameter Specification / Capacity - Machining height / Max. 1300 mm - Maximum glass height / Unlimited (Open-top model / open-top design) - Maximum glass length / 3200 mm - Glass size for drilling min. 600 x 210 mm - Glass size for milling min. 750 x 210 mm - Maximum glass weight 150 kg - Glass thickness for drilling 4 - 40 mm - Glass thickness for milling 4 - 20 mm - Tool magazine (Roto) Automatic double revolver magazine 10 + 10 (front and rear), total 20 positions - Tool diameter Up to max. 80 mm - Tool connection 1/2" gas thread with length 75 mm - Spindle speed 0 - 12,000 rpm - Spindle cooling Water-cooled - Control & Software Schraml software with Siemens electrical components - Included accessories Automatic sharpening device for tools - Separate vacuum pump for glass fixing - Additional conveyor (1 meter) - Machine dimensions L 7200 mm x W 2700 mm x H 2700 mm - Machine weight 3800 kg - Electrical connection 3x400V + N + PE, 50/60Hz, total power: 25 kW Dismantling, loading and installation can be carried out on request by our service team.

Year of construction: 1993, condition: used, Manufacturer: Hosokawa Bepex Model: PCS-10 (Pulvocron) Year : 1993 Type: Air classification mill / Microniser Nominal capacity: 10 kg/h Brabender screw feeder Product filtration and collection cyclone + pneumatic cleaning Fsdpfx Akszbynvoyopn Explosion-proof safety valve Rotary air/product seal valve Mikropul 12-6-30 receiver filter: Product collection hopper with fine particle separation Internal dimensions: Ø 90 cm x 530 cm Lubrication unit with a pump Steam sterilisation Plan a new electrical installation (This request is subject to an additional quote) Full technical documentation + paper drawings Product outlet hopper capacity: 200 kg – 1,100 litres

Condition: used, Year of construction: 2020, functionality: fully functional, total height: 900 mm, total length: 3,000 mm, total width: 1,500 mm, overall weight: 1,028 kg, Siegmund Welding Table Professional 750, Plasma-nitrided Size: 3000 x 1500 x 150 mm System 22 mm with diagonal grid and scale with base, standard version, 700 mm Fpodpsz Dpwnofx Akyjn Only the table is for sale, without any accessories.

Condition: used, Year of construction: 1988, operating hours: 2,506 h, functionality: fully functional, machine/vehicle number: 032-230, We are offering this Unicontrol 10 window manufacturing machine from Michael Wenig AG. It is in used condition, but fully functional. Year of manufacture: 1988, machine number: 032-230. Including control cabinet! Comes with three complete sets of tools from Leitz. Fodpezx Emdefx Akyopn - IV68 insert cutter with standard profile - IV68 cornice profile for listed buildings - Tools for wood and aluminum windows The following tools are included (as seen in the pictures): 1x slot cutter, vertical and 1x horizontal 1x slot frame, horizontal 1x tenon cutter, vertical, bottom and 1x top 1x cornice profile slot cutter, horizontal 1x tenon cutter, vertical 7 slot cutters 1x milling head frame, left/right/ top 1x milling head frame, bottom 1x milling head cutter, left/right/ top 1x milling head cutter, 2-wing, vertical 1x milling head cutter, bottom 1x milling head cutter, aluminum, for clipping 1x frame milling head, aluminum, for clipping 1x glass bead cutter, profile, standard 1x glass bead cutter, profile, cornice 1x roller shutter bead cutter It was decommissioned due to lack of space. Further information is available upon request. Stored in a weatherproof location in 96231 Bad Staffelstein - Uetzing. Collection at your own expense, including loading. We are happy to help, but due to the weight and the necessary loading equipment, we cannot take over the loading and transport and cannot provide any guarantee. Private sale. Old, used machine. No warranty, return, or guarantee claims.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Used Blue Mac 2510 Static Trommel Year 2016 10 M Long x 2.5 M Diameter Fedozzrwbepfx Akyopn 50mm Round Holes, 8mm Thick All New Drive Shafts & Wheels 4 x 5.5kW Electric Motors / Bonfiglioli Gearboxes 21 Tonne Weight Excellent Condition Ready To Go To Work

Condition: new, diameter / mm Cutting (quantity) / 0 weight / kg Make: INA Type: RUS38206 GR3/-10-15 RO-F05 Condition: New Fpedpfey S D Snjx Akyon Roller bearing Manufacturer's part number: Stock: 50 units available Price per unit

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Fpodpfx Aov Ivnzekyen Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Fpsdpfx Akev Ivn Uoysn Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Fpodpjyr H Ansfx Akysn Permeate output: Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality:

Condition: used, Year of construction: 2016, Suction capacity approx. 850 l/min Filling capacity approx. 680 l/min Compressed air tank 10 bar Fodpfx Akoy Ifmrsyspn Tank capacity Tank capacity 2 x 100 l Tank surface galvanized Mounted on safety base plate Including refrigerated dryer, fine filter, automatic condensate drain

Condition: excellent (used), Year of construction: 2016, ABB IRB4400L-10 + IRC5 controller + TPU-Low DTC Fpsdpfx Akezxbmasyen DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Year of construction: 2019, condition: like new (used), Complete Ilapak weighing and bagging system. Includes a vibration feeding. incline flighted belt conveyor. 10 head multihued weigher with 2.5 litre s/s buckets. Vegatronic 500 with 300mm jaws with plc for pre printed film. Markum printer and out feed conveyor. Fpsdpfxjywi Dae Akyon

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: SA13E94180, input voltage: 380 V, Nordson Problue 10 suitable for up to 6 hose connections with an automatic filling system. Fully cleaned and serviced, thoroughly tested for operation, both electrically and mechanically. The filling lance, hose, and raw material container are not included in this offer but can be provided as additional items upon request. Fodpfx Akew Rd Sdoyjpn

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 100 mm weight 354 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm Fpodpfx Akjxabqhjyon - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided version with scale - Including 4x basic equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N bracket + 1x 163999 accessory set

Year of construction: 2014, condition: used, This listing is for 1 of 2 Mueller PyroPure P7310 Pure Steam Generator. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. The “Turned on Time”of the unit is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". The sites steam requirements were low therefore the unit is in immaculate condition. They have full maintenance records backed up on their electronic technical system supplied as an extra by Freestead. This Unit is fitted with a Allen Bradley Compact Logix PLC and Panel View plus 1000 HMI's The Unit is supplied with- ⦁ Feed water pump system ⦁ Pure steam condensate sampling system ⦁ Pure steam analyser ⦁ Stainless steel sheathing and frame ⦁ Feed water analyser ⦁ Degasser The Mueller PyroPure P7310 Pure Steam Generator is a high-performance system designed to produce pyrogen-free pure steam suitable for the most demanding applications, such as pharmaceutical production, biotechnology processes, and healthcare sterilization. Built to meet or exceed U.S. Pharmacopoeia (USP) standards, the P7310 combines precision engineering, advanced technology, and robust materials to ensure consistent performance and reliability. They are CE marked and compliant with 3.1B material certification. The terms pure steam and clean steam are often used interchangeably in the pharmaceutical industry. However, not all equipment marketed as clean steam generators are up to the task of producing WFI quality pharmaceutical pure steam. Mueller pure steam generators use a tangential nozzle to provide separation of impurities from incoming feed water, producing pyrogen-free steam that, when condensed, meets USP requirements for water for injection. Key Benefits Superior Steam Quality: Produces pyrogen-free steam that meets USP requirements, ensuring safety and regulatory compliance. Optimized for critical applications like autoclaves, clean room humidification, and steam-in-place (SIP) sterilization. Achieves a 5 Log reduction in contaminants, which corresponds to a 99.999% reduction in microbial populations. This level of reduction ensures the highest degree of sterilization, making it ideal for pharmaceutical and biotechnology applications where absolute purity is critical. Efficient Design: External evaporator allows easy access for inspection and maintenance, reducing downtime. Separation column has no internal components requiring maintenance, eliminating potential for bacterial growth. Efficient heat transfer with a double-tube sheet evaporator minimizes stress cracking and maximizes performance. Ease of Maintenance: All critical components can be serviced with only 24" of clearance around the system. Fully drainable design prevents standing water, reducing contamination risks. Polished 316/316L stainless steel construction ensures durability and easy cleaning. Enhanced Operational Features: Minimal instrumentation is required, reducing complexity and operational costs. Simplified control with an Allen-Bradley PLC system, compatible with Ethernet for integration with facility systems. Certified elastomers (USP Class VI) provide enhanced compatibility with feed water and product. Fodexv Af Sepfx Akyepn Specifications Performance: Pure Steam Capacity: from 0 to 700 kg/hr at optimal feed water conditions. Operating Pressure Range: Pure steam output pressure up to 50 psig. Mater...

Condition: good (used), Year of construction: 1993, functionality: fully functional, Hand insertion safety – Pressing force up to 100 kN Throat depth: 210 mm Table size (W x D): approx. 500 x 400 mm Installation height with/without clamping plate: 300 mm Stroke: 100 mm Total power: 2.5 kW Weight: approx. 2.5 t Oil fill: approx. 150 l Required space (W x D x H): approx. 0.95 x 1.5 x 1.95 m Equipment and delivery scope: Switch-over between travel / pressure Pressure control valve with gauge display Fsdpoz Hpcvjfx Akyepn Adjustable dwell time Documentation

Condition: used, 10-position digital magnetic stirrer without heating, designed for synchronous stirring. The magnetic coil technology provides noiseless and consistent stirring on all positions. Speed remains constant, even when load changes Specification: Stirring speed: up to 1200rpm Stirring capacity: 400ml per position Dimensions – 19 x 57 x 6cm (w x d x h) approx Weight – 5kg Fodpfx Asylwcxskyspn Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2018, Notch-tongue system Weinig GRECON Fpodjzx Tddjpfx Akyen Type ProfiJoint 10/6100 LI

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 100 mm weight 354 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Fpedpjxaacpofx Akyjn Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided 750 version with scale - Including 4x basic equipment

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours Fjdoyf Uy Uspfx Akyopn 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 500 mm, spindle bore: 140 mm, turning diameter: 820 mm, turning diameter over bed slide: 800 mm, GURUTZPE Super AT 400/10000 lathe, with a wider bed than the standard model. This lathe has a 10,000 mm distance between centers and features a single headstock with a vortex system, designed for producing long-length spindles. It has a swing of 820 mm over the bed and 500 mm over the cross slide. The spindle bore diameter is 140 mm, and it can be equipped with a double chuck. It has 24 speeds ranging from 9-500 rpm, with a reduction gear providing speeds from 1-63 rpm. It is equipped with two steady rests and a universal 3-jaw chuck with a diameter of 630 mm. It is in very good overall condition. Fsdpjzmp Axofx Akyopn

Condition: like new (used), Year of construction: 2025, load capacity: 10,000 kg, Special price, used for 1/2 year, as new, with warranty Self-centering complete set, dual drive, synchronous with hand remote control, digital display, and foot control Fodpfx Akew D Rhasyspn Diameter from 300 mm to 3500 mm Drive roller diameter 300 mm Dimensions: length: 1900 mm x width: 470 mm x height: 390 mm Continuously adjustable speed 200 – 1200 mm/min. Motor AC 380 V

Condition: good (used), Year of construction: 2004, clamping force: 1,000 kN, clearance between the columns: 420 mm, displacement volume: 192 cm³, type of input current: DC, input frequency: 50 Hz, input current: 80 A, For sale: Battenfeld injection moulding machine, model HM 1000-750. The machine is in good condition and ready for immediate use. Technical data: Model / Type: HM 1000/750 Year of manufacture: 2004 Control system: Unilog B4 Total weight: 4,600 kg Hydraulic operating pressure: 240 bar Pneumatic operating pressure: 6 bar Rated voltage: 230/400 V Frequency: 50 Hz Rated motor current: 40 A Control voltage: 24 V DC Wiring diagram number: HM B4500028412 0 Max. main fuse: 80 A (1st power supply) / 50 A (2nd power supply) Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Maximum shot volume: approx. 192 cm³ Total input current: 63 A or 80 A Transport and loading can be organised Europe-wide upon request and at an additional cost. Prices are subject to VAT. Fsdpfxjy Enh To Akyjpn Inspection is possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange is possible! Machinery Trade / Purchase BUYING & SELLING PRODUCTION AND METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.