Used Ventherm Paint-/ Driyingbox Combined for sale (8,010)

Condition: new, Year of construction: 2026, Wetpaint Spray-/ Dryingcabine Internal dim. L8000 x B4000 x H3000mm 30.000m³/h Inletair/ 30.000m³/h evaporation Internal Temp. 20°C man. adjustable, Drying Temp. up to 70°C Indirect Gasburner approx 300KW (-10°C - +20°C) Software in delivered switch box Inlet air ceiling with filter G4/EU4 und NF600PA, Outside air bollom using grids and PS50 glas fiber Light (4x18W) wall integrated LED, 750LUX Bdodpfx Aehzbq Temrsh Grid point weight max750kg

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 13030301, Equipment: type plate available, We are offering a combined spray painting and drying booth MAXI RANGE 15-NOVA VERTA, which enables both painting and drying operations. The booth is capable of independent operation along its full length or separately in each of its two halves, independently from each other. Bodpfxjy Iamto Amredh

Year of construction: 2016, condition: excellent (used), - (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operator's individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) Bdedpfxjygu Smo Amrjh Length:16000mm Width:6000mm Height:6000mm

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration Bdjdpfx Aezubtlomroh • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 20 ft, color: grey-black, overall weight: 15,000 kg, maximum load weight: 12,000 kg, empty load weight: 3,000 kg, loading space volume: 33 m³, loading space width: 2,352 mm, loading space length: 5,898 mm, loading space height: 2,393 mm, Dear Sir or Madam, Bodpjzz Sh Tefx Amredh We are offering a combination of a 20" shipping container and a matching roll-off frame for sale. The frames have the following features: - Manufactured according to DIN 30722-1 - Lifting bracket, 50mm diameter - Hook height 1570mm - Superstructure usable length approx. 6,050mm - Sheets and profiles continuously welded - External rollers are lubricatable and replaceable - Total weight 15,000kg - Tare weight approx. 800kg - Payload approx. 14,200kg - Painted in RAL 7016 - 4x twistlock fastenings for transporting 20" shipping containers - Incl. type plate and container inspection according to DGUV Rule 114-010 (formerly BGR 186) - 1x 20" shipping container TEU-1 (as new) - External dimensions 6,058 x 2,438 x 2,591 - Incl. lockbox - Air vents all around - 33m3 volume - Wooden floor - Total price: €5,100.00 plus VAT. Nationwide delivery possible for an extra charge! If you are interested in other roll-off container products, please do not hesitate to contact us at any time.

Condition: excellent (used), Year of construction: 2014, Binks Raptor Lite AirCombi Spray Unit The Binks Raptor Lite on tripod combines the NEW Binks MX 4/32 stainless steel pump with the NEW Binks AirCombi spray gun AA4400M. This guarantees pulsation-free paint supply and perfect surface quality. Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Typical fields of application: - Furniture and wood industry - Aerospace - Off-road Bdodey A Ni Tepfx Amrsh - Metal processing - Truck trailer and semi-trailer manufacturing - And many more… Suitable for the following materials: - Wood stains, paints and glazes - Primers, sealants, and undercoats - Solvent-based and water-based paints - Polyurethane - And many others… 32:1 AirCombi Spray Package - Patented magnetic shift for rapid, pulsation-free stroke changeover - All wetted parts made from stainless steel - AirCombi spray gun with the latest atomization technology - Modular design for reduced maintenance effort and minimal downtime - Fixed, spring-preloaded packings - Large sight glass for separating agents - Manufactured according to ISO 9001, CE and ATEX certified Raptor Lite Pump Specifications: - MX4/32 – ratio 32:1 - Maximum material flow: 4 l/min - Maximum operating pressure: 256 bar Location: in stock, 54634 Bitburg - Available immediately -

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Bodpsz D Ihfefx Amredh

Condition: used, functionality: fully functional, machine/vehicle number: 34140, mileage: 10,900 km, power: 315 kW (428.28 HP), first registration: 09/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 13.5 m³, Equipment: ABS, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Bdjdpfez Hm I Nox Amrjh Chassis design for ADR, ADR type class FL including EX/II, EX/III and AT, weight variant 27 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, tire pressure control, front guard assist, radar on the side, starting assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t trailing axle, daytime running lights, rain sensor, light sensor, AHK Ringfeder (D40), tires: front axle 385/65R22.5, rear axles 315/80R22.5 Cab color is white, M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort locking system with central locking, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, pre-installation for alcohol tester, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-installation for toll collection, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacon lights on the cab roof, sun visor Equipment and design according to ADR (tank code: L4BH); total tank volume 13.5 m³; closing bottom covering the entire cross-section of the tank, opening upwards with 2 hydraulic cylinders; lid locking with tension claws, hammer head screws and linkage in galvanized design; centrally operated via a pneumatic cylinder, level indicator with 2 internal floats and external scale calibrated in 500 l increments for each piston position, discharge apron made of aluminum, emptying via pneumatically operated piston, piston with manhole DN 450 mm; 3-way adjustable piston with water/sludge volume division: position 1: approx. 10.3/3.2 // position 2: approx. 8.5/5.2 // position 3: approx. 6.5/6.5; vacuum pump: CVS VacuStar 1600L (1,550 m³/h at 400 mbar) water-cooled and mechanically driven, lower and upper suction and discharge connection DN 100 with TW coupling and blind cover pneumatically operated, suction connection for trailer operation at the rear left, suction hose cassette with simultaneous telescopic boom DN 125: the boom arm is hydraulically extendable up to 1,850 mm and hydraulically liftable up to 4,600 mm above the ground and can be swiveled 180°, either together with the high-pressure hose reel or independently of the high-pressure hose reel, incl. suction pipe approx. 800 mm long DN 125 mm and a Perrot M coupling, sludge water drain DN 80 for pushing the dirty water back into the sewer via the boom, HD pump URACA KD 718G (333 l/min at 170 bar) mechanically driven, large HD hose reel hydraulically swiveling 180° and hydraulically driven with sewer flushing hose DN 25 approx. 180 m long; small hose reel hydraulically driven with 60 m HD hose DN 13 mm and spray gun, rotating beacon, removable halogen work light with 20 m cable, ambient lighting with 4 LED spotlights switchable from the operating platform, operating platform mounted at the rear right on the superstructure as well as on the high-pressure hose reel made of stainless steel with louvers, remote control.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 9419257, total height: 2,500 mm, total length: 4,500 mm, total width: 2,200 mm, volume flow: 5,000 m³/h, type of input current: AC, overall weight: 600 kg, inner dimension height: 2,400 mm, inner dimension length: 3,800 mm, suction capacity: 4,500 m³/h, inner dimension width: 2,100 mm, input voltage: 400 V, space requirement height: 2,600 mm, space requirement length: 5,000 mm, Equipment: cabin, lighting, Selling a modular Straumann painting booth with few operating hours. Straumann painting booth (year of manufacture 2021) – in good condition Selling a modular Straumann painting booth with few operating hours. Equipment & Details: Dimensions: Filter area 1.50 × 1.50 m, with extension and booth Work area approx. 2.10 x 2.40 x 3.50 m Technology: Extraction wall, fan with frequency converter, lighting Filtration: 3-stage filter system and 1+1 double door with filter for the afterflow air Construction: SVZ sheet metal panels, screwed together, smooth interior, with 1+1 double door Condition: Good, well-maintained, easily disassembled, as shown in the pictures. Design and details as shown in the pictures. Disassembly by the buyer; exhaust pipes can be taken over. Please contact me if you have any questions or would like to arrange a viewing. Bdodpfx Aez D Ifqjmreh => Disassembly and removal by the buyer => Free of charge, including painting equipment / pressure tank with spray gun, as shown in the pictures => All information without guarantee. Subject to prior sale. Used system: Sale excluding any warranty or guarantee.

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. The system includes the following units: Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #2 Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Bdsdpez Hbm Tofx Amrsh Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #3 Width 570 cm, length 700 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas Bsdez Hngmopfx Amrsdh • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 440079, We offer this ready-to-use GSE Dispensing Colorsat Slim M20-WB paint mixing machine, manufactured in 2008. Bsdoz Daukjpfx Amredh The unit currently has 12 dispensing stations connected, but it can be expanded to include an additional 8. We will also provide the user manual and operating instructions with the machine. The mixing machine features: Sandpiper pump module Network connectivity Pneumatic control Component circulation system Printer Dispensing valves Valve cleaning module Dispensing based on formulations Component dispensing Inventory management system We experienced an issue with the scale, which was resolved after replacing the power supply. During dispensing, the mixing machine occasionally fails to dispense the specified component, but only when dispensing in droplet mode. We can send a video demonstrating the machine's operation upon request. If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. Bodpfx Aoz Eft Ijmrodh An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: new, Year of construction: 2026, total height: 3,000 mm, total length: 4,900 mm, total width: 2,400 mm, volume flow: 3.6 m³/h, type of input current: three-phase, power: 1.1 kW (1.50 HP), Equipment: cabin, Wet paint spray booth in cabin with extraction and supply air filter, lighting. Bdedpfx Aervi Riemreh

Condition: good (used), Year of construction: 2002, For sale is a used Holzprofi circular saw and milling machine with a cutting length of 2500 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical specifications: - Cutting length 2500 mm - Cutting width 1200 mm - Cutting height 90 mm - 3 milling speeds Bdjdpfoz Apgisx Amroh - Height-adjustable + swiveling - Dust extraction port Ø 100/80 mm - 2 motors, each 4.4 kW / 6 HP - Year of manufacture 2002 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, combination machine Reference: R-J047R

Condition: good (used), For sale is a used Bernardo FS41N planer-thicknesser machine with a planing length of 1800 mm. The machine has been inspected by our qualified technicians and is in good condition. Technical data: - Planing and thicknessing width 410 mm - Planing table length 1800 mm Bedpfxez E Hype Amrodh - 4 cutterblocks (reversible knives) - Thicknessing height 4-230 mm - 8 m/min feed rate for thicknessing - 2 feed rollers under the table - Dust extraction possible - 4 kW (5.5 hp) motor - Weight 420 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Related terms: planer, thicknesser, jointer, thicknessing, planing Reference: R-E28WZ

Condition: used, Year of construction: 1997, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Typ 250 R.B.S.EH, total width: 1,300 mm, total length: 3,200 mm, total height: 1,400 mm, trimming length: 2,960 mm, overall weight: 2,500 kg, table length: 25,002,920 mm, table width: 920 mm, table height: 900 mm, STEKO 250 master press, long belt grinder, veneer saw Cutting length 2970. Press 2500 x 1100, 920 for push-through operation Grinding table 2500 x 930 Bsdpfx Amez Ecfhorsdh Includes existing grinding belts.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a complete, fully functional, and automated powder coating line for metal parts, complete with an automated process transport system. This is a ready-made solution for manufacturers of shelving, steel structures, warehouse equipment, and other metal components requiring high-quality paint coatings. The entire system is an integrated process that includes the transport of raw parts, surface preparation, powder coating, curing, and inter-process transport. The price includes: Bodpfxsz Azx Ro Amredh 1. Dismantling and reassembly of the line at a new location, including accommodation and meals for the technicians. 2. New insulation for the joints of the wall and roof panels, the furnace, and the floor. New bolts for the joints. 3. Sealants for the PP tunnel, connection of sections with tubs, and sections with sections.

Condition: used, functionality: fully functional, Year of construction: 1991, operating hours: 4,950 h, power: 139.74 kW (189.99 HP), color: green, total height: 4,089 mm, total length: 9,728 mm, total width: 4,572 mm, 1991 | John Deere 9500 | Used Combine Harvester | 4,950 hours Bodpfx Amoz Ebxyorjdh Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: John Deere combine harvester with a 190 hp diesel engine, 7,164 L grain tank, 17 ft unloading auger, straw chopper, and chaff spreader. Equipped with PRWD, 30.5-32 and 18.4-26 tires, and factory grain bin extension. ✔ PRWD ✔ 30.5-32 tires ✔ 18.4-26 tires ✔ 17 ft unloading auger ✔ Factory grain bin extension ✔ Straw chopper ✔ Chaff spreader ✔ 2 WD live front axle ✔ Conventional walker configuration ✔ Rasp bar cylinder Key specs: Engine power: 190 hp Engine hours: 4,950 hr Operating weight: 9,190 kg (20,260.5 lb) Grain tank capacity: 7,164 L (203.3 bu) Unloading rate: 2.6 bu/sec (90.4 L/sec) Unloading auger length: 17 ft (5.2 m) Fuel tank: 530 L Engine displacement: 7.6 L Combine type: Corn/Bean, Walker (conventional) Dimensions (L × W × H): 9,728 × 4,572 × 4,089 mm What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: used, Combination jointer-planer machine Manufacturer: SCM LINVINCIBLE Type: 2200 Planing width: 50 cm Feed height: 20 cm 3-knife cutterhead 2 feed speeds Adjustable jointer fence Adjustable sliding rollers in the planer table Condition: see images, or refer to the item description. Parts can also be picked up on site. All dimensions are approximate. All information is provided to the best of our knowledge but without warranty. Subject to prior sale. Shipping costs are an estimate; they may vary depending on the distance and unloading possibilities. The items can be picked up on site or shipped at the buyer's expense. The stated selling price is a net amount plus VAT. Bdjdpsz Ef Ifefx Amrjh An invoice with VAT breakdown is included with the goods. Warranty basis: Due to wear and tear on used parts, the items are generally sold as defective – for spare parts – only to commercial businesses. By submitting his bid, the buyer accepts this as the basis of the purchase contract. If the offered item is a used item, the warranty is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: like new (used), SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: X60DH3 - For general industry, paints, and contractors. - Maximum flow rate: 13.2 l/min (Output per cycle: 220 cc) - Xtreme Pump 60:1, cart-mounted - Maximum working pressure: 420 Bar - For high-viscosity paints, polyurethanes, enamels, etc. - Includes new hose, gun, and nozzle - New XTR7 Graco gun - New 15-meter, 500 Bar hose - New XHD519 Graco nozzle - Used product, fully inspected. - 1-year warranty Bdodpfx Amjz D Tkxsrjh - Shipping or in-store pickup available - VAT not included

Condition: good (used), Code: 0486 Brand: SCM MINIMAX Model: CU 410 CLASSIC - CE Standard Universal professional high quality 6-works combined machine for joinery, production of furniture, custom furniture, panels, doors, window frames and various - CE Standard Technical data: Sturdy construction: the base consists of a single, fully welded steel monoblock Surface Planer: Max working width mm 410 Length of cast iron worktables mm 1800 Tiltable surface fence 90-45° Planer spindle rotation speed rpm 5200 Max removal at planer mm 4 Thickness planer: Thickness table size mm 605 x 410 Feed speed at thickness mt/min 7 Min/max working height on thicknesser mm 3/230 Circular saw: Squaring carriage length mm 2250 Squaring frame Blade inclination 90-45 degrees Max diameter of saw blade with installed scoring unit mm 315 Max saw blade projection mm 100 Scoring unit blade unit diameter mm 80 Bdsdpfx Amjz E Sgujroh Cutting width at parallel fence mm 1050 Telescopic guide with 2 squaring stops Spindle moulder: Spindle diameter mm 30 Max spindle length mm 100 Spindle rotation speed rpm 1400/3500/6000/8000 Max tool diameter mm 210 Mortiser: Cast iron mortiser with spindle diameter 16 mm Work surface dimensions 470 x 220 mm Workpiece clamping press N° 3 Three-phase motors Hp 5,5 Suction connections N° 3 ports diameter mm 120 Overall dimensions of assembled machine mm 2500 x 2800 x 1200 h Overall dimensions for transport mm 2500 x 1600 x 1200 h Weight kg 630

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 510 mm, number of blades: 4, overall weight: 430 kg, extraction nozzle diameter: 120 mm, For sale is a used FELDER AD 7-51 surface and thickness planer, manufactured in 1998. This machine impresses with its robust cast iron construction, high precision, and the typical Felder durability. With a planing width of 510 mm, the AD 7-51 is ideal for carpentry workshops, joineries, furniture manufacturing, and professional interior design. The machine is in used condition and offers a powerful combination of surface and thickness planing for daily workshop use. Equipment: • Surface and thickness planer in one machine • Robust industrial design • Precise cast iron guide tables • Self-adjusting planer knives • Powerful 4 kW drive • Proven Felder quality machine Bedpfx Ajzwnmqsmrjdh • Ideal for solid wood and furniture construction • Thicknessing unit with central, electric height adjustment • Feed rate for thicknessing: 6 m/min and 12 m/min • Thicknessing capacity: 4-220 mm • Massive cast iron surface planing tables for vibration-free operation • Planer shaft with 4 system planer knives • Surface planing table length: approx. 2,050 mm

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer. Bdjdpjz D Evyofx Amrsh

Condition: like new (used), Year of construction: 2008, functionality: fully functional, planing width: 530 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,800 rpm, total length of planing tables: 2,300 mm, total width: 1,000 mm, total height: 920 mm, overall weight: 750 kg, Equipment: CE marking, KNAPP AD 530 SUPER Planer-Thicknesser | 530 mm | TERSA Shaft | Electric Table Lift | Year 2008, Planer-Jointer! Professional KNAPP AD 530 planer-thicknesser, manufactured in Austria. This is a high-class industrial machine designed for intensive use in woodworking shops, furniture production, and the manufacture of window and door frames. The AD 530 model stands out with its robust construction, 530 mm working width, long cast iron tables, and a modern TERSA shaft, enabling quick knife changes without adjustment. An additional advantage is the electric table lift on the thicknesser, which provides convenient and very precise adjustment of the working height. Key advantages: - Austrian KNAPP production - Year of manufacture: 2008 - Working width: 530 mm - TERSA MONOBLOCK planing shaft with 4 knives - Quick knife change without adjustment - Electric thicknesser table lift - Automatic opening of the planer tables - Long cast iron work tables - Robust construction with a weight of 750 kg - Industrial quality construction TECHNICAL PARAMETERS: - Manufacturer: KNAPP Produktion GmbH - Model: AD 530 SUPER - Year of manufacture: 2008 - Country of manufacture: Austria - Working width: 530 mm - Length of planer tables: 2300 mm - Shaft diameter: 120 mm - Shaft type: TERSA MONOBLOCK - Number of knives: 4 - TERSA knife dimensions: 530 × 35 × 3 mm - Shaft speed: 4800 rpm - Maximum planing height: 250 mm - Minimum planing height: 3 mm - Maximum material removal: 8 mm - Feed speeds: 7 / 11 / 15 / 19 m/min - Tilting fence 90°–45° - Thicknesser table dimensions: 530 × 930 mm Bdedpozxxqvsfx Amroh - Motor power: 5.5 kW - Power supply: 400 V - Machine weight: 750 kg - Machine dimensions: 2300 × 920 × 1000 mm Equipment: - TERSA MONOBLOCK shaft with 4 knives - Automatic opening of the planer tables - Electric thicknesser table lift Application: The machine is perfect for: - furniture production, - carpentry, - companies producing stairs, - production of windows and doors, - processing of solid wood, - professional woodworking workshops. The machine is in very good technical condition. A solid construction ensures high operational smoothness, great cutting accuracy, and years of trouble-free operation. PRICE VAT MARGIN BRUTTO OR VAT23% INVOICE WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl