Used Vdf-Wohlenberg Cnc Lathe for sale (11,583)

Condition: good (used), steady rest CNC Lathe VDF Wohlenberg - U1270 MACH-ID 9187 Make: VDF Wohlenberg Type: U1270 Length:1400mm Width:800mm Lredpfxozcn Srs Aiisn Height:1500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, turning diameter over cross slide: 640 mm, spindle bore: 63 mm, turning length: 2,000 mm, quill diameter: 100 mm, total length: 5,200 mm, total width: 2,100 mm, total height: 2,100 mm, overall weight: 8,200 kg, rotational speed (min.): 2,500 rpm, three-jaw chuck diameter: 315 mm, CNC Lathe VDF BOEHRINGER - DUS630Ti MACH-ID 9628 Make: VDF BOEHRINGER Type: DUS630Ti Control: Heidenhain Manuel Plus Year: 2013 Steady rest fixed 400 mm Steady rest open 120 mm ROHM 3 chuck  Ø 315 Multi Fix tool holder system with inserts Manuel Plus controller Swing over bed Ø: 640mm Swing over cross slide Ø:385mm DBC Turning Length: 2000mm Spindle bore: 62mm Spindle power: 22kW Tailstock spindle Ø: 100Ø Stroke pinole: 190mm Spindle taper: 5Mk Speeds / ranges: 2500Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 10000mm/min. Lodpfxsy T Hlmj Aiiorn Length: 5200mm Width: 2100mm Height: 2100mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, turning diameter over cross slide: 960 mm, turning length: 10,000 mm, turning diameter: 1,300 mm, spindle bore: 160 mm, Lathe Wohlenberg model M 1000 BSN in excelent condition. Machine were retrofited with Siemens 802. Ledpsxprrbsfx Aiiorn Machine is under power and it can be tested.Two steady rest

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm Ljdpfx Aioy S Duvoiorn turning length 10000 mm turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm spindle bore 82 mm upper head travel 500mm tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t Power 45 KW The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Accessories - Feed guard Equipment - 3-axis digital display - 1 x faceplate - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Lrsdsy D E Rispfx Aiisn Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: good (used), Different tool holders . As we informed, they are used on Biglia CNC lathe. Lredpfxsy Shyie Aiien

Condition: good (used), Year of construction: 2001, Manufacturer: VDF Wohlenberg Type: V-Model Year of manufacture: 2001 Maximum swing 500 mm Lodpfx Aewrrbwjiiern 3 x adjustable bronze rollers 2 Matching steady rest Specifications Metric US Standard Fixed steady rest Fixed Min. diameter 50 Max. diameter 500 Center height 500 mm Dimensions (estimated) Length 1200 mm Width 800 mm Height 1200 mm Weight 800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual obligations should be assumed. We recommend that you check all important details. Share on

Condition: good (used), Year of construction: 1986, turning diameter: 1,260 mm, * Distance between centers: 11000 mm Lrjdpfx Aeuh Slkjiisn * Roll diameter: max. 1260 mm * Max workpiece weight: 22.4 T

Condition: used, Year of construction: 1980, VDF Wohlenberg Type:V1400 Parts . Top support : Lsdpfx Aetttigoiisrn Overall height : 600 mm Overall length : 650 mm Base plate : 350 mm X 350 mm Base plate holes diameter : 22 mm Spacing: width 240 mm lengthwise : 290 mm Tool holder mounting : 100 mm X 45 mm Thread tool holder M30 . Tailstock: Center height : 630 mm Quill diameter : 100 mm Base plate : 500 mm X 400 mm . Faceplate : Diameter 1000 mm Width : 125 mm with 3 jaws Spindle holder 250 mm 4 bores diameter 20 mm pitch circle 200 mm . Sale individually or in a package possible .

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm Lrodpfxoxdmgvs Aiion CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), Year of construction: 1989, turning length / mm turning diameter over bed / mm turning diameter over slide / mm control / WOHLENBERG PT1-1070II Heavy-duty lathe Very good condition heavy duty lathe, make Wohlenberg. The machine was partially overhauled in 2013! Lredpfeud Ipkex Aiijn Type PT1-1070II Year of manufacture 1989 partially overhauled in 2013 Country of origin Germany CNC control Siemens 840 D extended from 7 m to 11 m turning length Santer turret geometry Turning diameter over bed 1,070 mm Turning diameter over support 710 mm Turning length 11,000 mm Bed width 710 mm 2 gear stages Speed 3.55 - 710 rpm Quill diameter 200 mm Quill stroke 350 mm Spindle clearance 128 mm Chip conveyor Boring tower incl. boring bar Length approx. Ø 200 x 2,430 mm Face plate 1,000 mm Steady rest 4 quills 500 mm open Main drive motor 71 kW incl. documentation

Condition: good (used), Year of construction: 1954, Ref. -No.: 10576 Manufacturer: VDF WOHLENBERG Type: VDF Year of construction: 1954 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 27XXX Turning Length: 4000 mm Spindle Diameter: Ø 80 mm Faceplate Speeds I: 355 RPM Lsdpsxmd U Aefx Aiiern Turning diameter over cross slide: Ø 1000 mm Max. Turning diameter: Ø 1250 mm

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm Ljdex I A Hcjpfx Aiiorn • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: good (used), turning diameter over top slide: 940 mm, turning diameter: 1,260 mm, rotational speed (min.): 8 rpm, rotational speed (max.): 900 rpm, total height: 1,800 mm, total length: 12,200 mm, total width: 1,540 mm, three-jaw chuck diameter: 500 mm, distance between centers: 8,000 mm, VDF Wohlenberg V1180 Distance between centres: 8000 mm 3.5 - 710 rpm Lrodpfx Ajx Thqdjiisn 71 - 900 rpm Chuck: 500 mm diameter

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft Ledow Dufiopfx Aiijrn *

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1325.0458-14, controller manufacturer: Siemens, input frequency: 50 Hz, input current: 190 A, TECHNICAL DETAILS Electrical Operating voltage: 400 V Ledpewx Hktofx Aiiorn Phases: 3 AC Frequency: 50 Hz Fusing: 250 A Rated current: 190 A EQUIPMENT Lathe with 4 tools, suitable only for 3-cylinder crankshaft

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 7402-09-03006-03, spindle bore: 90 mm, rotational speed (max.): 2,000 rpm, center width: 3,000 mm, center height: 325 mm, controller model: SIEMENS SINUMERIK 810D, TECHNICAL DETAILS Swinging diameter over bed: 630 mm Swinging diameter over carriage: 380 mm Center height: 325 mm Distance between centers: 3,000 mm Carriage overhang on bed: 700 mm Bed width: 520 mm Longitudinal travel X-axis: 355 mm Longitudinal travel Z-axis: 3,000 mm Tailstock spindle diameter: 100 mm Tailstock spindle travel: 180 mm Maximum workpiece weight between centers: 3,000 kg Maximum workpiece weight in cantilever mode: 500 kg Spindle bore: 90 mm Spindle mounting: DIN 55027/8 Spindle taper: 120 mm Front spindle bearing: 130 mm Main drive power 100% ED / 40% ED: 12 / 18.5 kW Maximum torque: 2,400 Nm Speed: 2–2000 rpm Lrjdjzc Hmnjpfx Aiion Speed ranges: 3 Range 1: 2–220 rpm Range 2: 50–660 rpm Range 3: 100–2000 rpm Speed control: 50–120 % MACHINE DETAILS Control system: SIEMENS SINUMERIK 810D Load display on screen: 0–140 % Main drive: 10 kW Power supply: 3 × 400 V / 50 Hz Dimensions & Weight Dimensions (L (with chip conveyor) x W x H): 5,600 x 1,950 x 1,850 mm Machine weight: approx. 5,500 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 500 mm, turning diameter: 300 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, controller model: OSP 5000L-G CNC-System, No minimum price – guaranteed sale to the highest bidder! Turning machine with integrated Okuma robot! TECHNICAL DETAILS Turning diameter over cross slide: 450 mm Turning length: 500 mm Turning diameter: 300 mm Spindle bore: 75 mm Spindle speed: 70 - 3,800 rpm Spindle power: 11 kW (30 min) / 7.5 kW continuous operation Travel X-axis: 400 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate XZ: 12,000 mm/min Data transmission: RS232 Tool turret: 12 positions MACHINE DETAILS Lodpfxezc E Dfj Aiijrn Control system: OSP 5000L-G CNC system Data transmission: RS232 Tool turret: 12 positions Power supply: 3 × 400 V Rated machine power: 21 kVA Maximum load current: 36 A Dimensions & Weight Dimensions (L (with chip conveyor) x W x H): 3,900 x 1,800 x 1,800 mm Machine weight: approx. 4,500 kg EQUIPMENT Integrated Okuma robot Automatic parts feeding Ideal for series and automated turning operations Stable and durable design

Condition: ready for operation (used), functionality: fully functional, turning diameter: 660 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, controller model: MAZATROL Fusion 640 MT, spindle torque (max.): 349 Nm, TECHNICAL DETAILS Turning diameter max.: 660 mm Main spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 22 / 15 kW Torque max.: 349 Nm Spindle bore: 76 mm Chuck diameter: 210 mm C-axis indexing: 0.0001° Sub spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 18.5 / 15 kW Torque max.: 326 Nm Chuck diameter: 210 mm C-axis indexing: 0.0001° Cooling Coolant tank volume: 300 l Pump capacity: 20 l/min Pump pressure: 5 bar Compressed air requirement: 5 bar, 500 l/min MACHINE DETAILS Control model: MAZATROL Fusion 640 MT Lrodezgufrepfx Aiisn Total power consumption: 66 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Technical documentation Chip conveyor with cooling system 20-position tool magazine B-axis (positioning in 0.001° increments) C-axis Y-axis Angular positioning of the sub spindle Synchronization of main and sub spindle Tool setting system (Tool Eye) Interlock for the front door Complete cooling system Interface for IC memory card

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 402 mm, turning length: 758 mm, turning diameter: 450 mm, spindle speed (max.): 3,000 rpm, turning diameter over bed slide: 582 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 450 mm Maximum turning length: 758 mm Diameter of rotation over the bed: 582 mm Diameter of rotation over the cross slide: 402 mm Spindle speed: 3,000 rpm Maximum spindle torque: 351 Nm Distance between centers: 744 mm Bar diameter: 81 mm Chuck size: 260 mm (10") Maximum bar diameter: 40 mm Axes: X, Z Number of tool positions in the tool changer: 12 Tool shank size: 25 × 25 mm Lrjdpfezgt U Sex Aiien Travel in the X-axis: 250 mm Travel in the Z-axis: 790 mm Rapid traverse rate in the X/Z direction: 30 m/min MACHINE DETAILS Control model: Hurco WinMax Spindle power: 22 kW Power supply: 400 V / 50 Hz (market-dependent) Machine weight: approx. 5,000 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: X2S174, turning diameter over cross slide: 246 mm, turning length: 1,200 mm, spindle speed (max.): 2,700 rpm, turning diameter over bed slide: 400 mm, controller model: Fanuc 0i-TF Plus, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 246 mm Swinging diameter in the steady rest area: 585 mm Spindle speed range: 1–2,700 rpm Distance between centers: 1,200 mm Lodpfxozgt Urs Aiijrn Spindle bore: 55 mm / 80 mm Spindle nose: D1-6 Camlock Chuck size: 250 mm Axes: X, Z MACHINE DETAILS Control model: Fanuc 0i-TF Plus Main motor power: 7.5 kW Machine weight: approx. 2,200–2,500 kg EQUIPMENT Coolant system Manual tailstock Automatic lubrication of guideways and ball screws

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 81 mm, turning diameter: 99 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 240 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning length: 81.3 mm Maximum turning diameter: 99.1 mm X-axis: 300 mm Z-axis: 240 mm Spindle head: A2-6 Spindle bore: 33 mm Speed (variable): 4,000 rpm Spindle motor power: 11 kW Number of tools on the turret: 8 Number of driven tools: 10 MACHINE DETAILS Control: Fanuc 21iT Dimensions & Weight Machine dimensions (including chip conveyor): 290 x 235 cm Machine weight: 4,000 kg Dimensions of transformer station: 65 x 60 cm Weight of transformer station: 150 kg Overall dimensions (L x W x H): 2,600 x 2,300 x 2,400 mm Total weight: 3,900 kg Lsdpfx Ajzfg E Ioiiern EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: ML0313-000510, turning length: 1,275 mm, turning diameter: 481 mm, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, MACHINE DETAILS Power supply: AC 380 V, 3 phases, 50/60 Hz Rated power: 36.11 kVA Full load current: 54.87 A Machine weight: 6,900 kg EQUIPMENT CNC control with operator panel Tool turret Tailstock Spindle chuck Enclosed work area Gap-bed design CE marking The following data is taken from a manufacturer's data sheet. The seller assumes no liability for the accuracy of the information: TECHNICAL DETAILS Lrsdpjzf I Scefx Aiijn Standard spindle chuck, main spindle: 12″ Maximum turning diameter: 481 mm Maximum turning length: 1,275 mm Travel distances Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Travel X-axis: 260 mm Travel Z-axis: 1,350 mm Main spindle Spindle speed max.: 2,800 rpm Spindle power max.: 35 kW Spindle torque max.: 1,613 Nm Tool changer Number of tools: 10 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,633 x 2,394 x 2,110 mm Machine weight: 6,900 kg

Year of construction: 1993, condition: used, machine/vehicle number: 156, CNC control Traub System TX8 F, with 1 turret with 6 tool stations and 1 turret with 6 tool stations, driven tools, bar capacity 30 mm, equipped with fleece filter system, coolant device and automatic bar loading magazine. Lrjdpfx Aiey Sqkwjion

Condition: used, Year of construction: 2008, machine/vehicle number: 7041245, CNC control Traub system TX8 I, bar capacity 42 mm, max. turning length 450 mm, max. spindle speed 8000 rpm, 2 turrets each with 10 tool stations, driven tools, coolant system, chip conveyor KNOLL 240 S-1/50, filtration system/compact band filter RESY Ledpfx Aoy Sqg Eeiisrn