Used Unknown Table Press With Power Unit for sale (75,947)

Condition: good (used), TABLE PRESS WITH POWER UNIT Nsdpfx Aek Adfnsf Sslg

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz Nedsl Nbqcopfx Af Solg - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Nodpfou D Tz Ujx Af Sslg Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: used, Hydraulic scissor lift table WEIDMANN, type E5/13-1 Manufacturer's No. 30403339, Year of manufacture 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift height max. 1280 mm Overall height - table in lowered position 290 mm Overall height - table in raised position max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Rotary switch on the hydraulic unit for raising and lowering - Lowering speed can be adjusted continuously via a throttle valve Nlsdpfx Afohlnzns Sog - 1 lifting cylinder - Hydraulic unit, year of manufacture 2007, with tank positioned beside - Safety guard frame with limit switches Weight 660 kg Good condition

Condition: used, Hydraulic power unit, KOSMEK hydraulic unit Pneumatic pressure converter Type: PL 087 Operating pressure: 100 bar Flow rate: 1 liter/min Tank capacity: approx. 4.5 liters - pneumatic drive - hydraulic connection Space requirement L x W x H: 250 x 140 x 290 mm Weight: 16 kg Nodpfjzpbqtjx Af Solg in good condition

Condition: used, High-pressure hydraulic power unit up to 630 bar, WEBER Type E45 / 59600.0 High-pressure unit + hydraulic spreader Year of manufacture 1988 / 1986 Nledpfx Afjdzp S Rj Ssg Hydraulic power unit, Type E45 / 59600.0 Operating pressure max. 630 bar Flow rate approx. 2 l/min Tank capacity approx. 10 liters Spreader – jaws, WEBER Type SP30 / 59 198.0 Outreach = arm length 340 mm Spreading distance max. 610 mm Spreading force in the working area max. 132 kN Closing force 99 kN - Double hose with plug-in connection Rated power 0.9 kW Mains connection 220 volts, 50 Hz Weight of hydraulic power unit approx. 40 kg Weight of spreader approx. 25 kg Very good condition Hydraulic fire and rescue set with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart. It can also be used to compress or lift loads. Versatile due to the multifunctional spreader jaws made of die-forged and hardened steel.

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm Nljdsu Smq Sepfx Af Sjg - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: good (used), Fetra Table top Cart 127x80cm with 3 shelves Perfect condition, like new. Modular design. Powder-coated blue. Non-marking thermoplastic rubber tread, wheels with precision ball bearings. 2 swivel wheels with brakes and 2 fixed wheels. Nljdpfey Sd Tfox Af Seg Load capacity: 500 kg

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Approximate format: 480 x 330 mm Nedpfx Aozt H U Eef Sjlg 3-ton pressure

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Nljdpfozt H Uxox Af Sjg Pressure: 3 tons Made in Germany.

Year of construction: 2010, condition: used, Year of manufacture: Mar 2010 Nodpfx Afjv Sra Ie Sslg New: No

Condition: used, Hydraulic power unit, hydro power unit with double pump, tandem pump, hydraulic unit Manufacturer likely Italian Type: PF1/1-2.8/2.8 Year of manufacture: approx. 2000 Operating pressure: 50 bar, max. 100 bar Flow rate: 2 x 4 liters/min. (2 pumps) Tank capacity: approx. 25 liters Motor power: 1.5 kW Power supply: 220 volts, 50 Hz - Double pump, tandem hydraulic pump, type PF1/1-2.8/2.8 131DBV601 - 1 return filter - 2 pressure gauges - Tank dimensions (L/W/H): 320 x 300 x 290 mm - Pressure port connections at the hydraulic pump outlet: 10L Installation space required (L x W x H): 600 x 400 x 600 mm Net weight: approx. 70 kg Nedpoxrgt Ssfx Af Solg Very good condition

Condition: used, Hydraulic Power Unit with Hydraulic Pump FRIEDRICH - REXROTH - HYDRONORMA Hydraulic unit type HY01 - PV2V3-30 / 12R1MC 63 A1 Year of manufacture: 1979 Pump operating pressure: 80 bar Pump flow rate: 14 liters/min (unloaded) Motor power: 1.5 kW Tank capacity: approx. 30 liters Power supply: 400 volts, 50 Hz - Silent power unit, space-saving design - Hydraulic pump BOSCH REXROTH type PV2V3-30 / 12R1MC 63 A1 - Solenoid valve BOSCH REXROTH 081WV06P1N112 - Return line hydraulic filter - Pressure gauge - Hydraulic tank with top lid for easy access Nedpoxf Uzksfx Af Solg - Electric switch for 2-way changeover Space required (L x W x H): 415 x 410 x 850 mm Net weight: 85 kg Good condition

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Nsdoz Dtcbepfx Af Selg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Year of construction: 2022, condition: good (used), The hydraulic unit is in good condition and was built in 2022. Components of the hydraulic unit Hydraulic pump Electric motor Hydraulic tank Filter Valves Accumulator Njdswg Hnbspfx Af Sjlg Sensors and control unit

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic test pump Nljdpfsc Skt Eox Af Sjg -Hydraulic unit for: Power chuck -Hydraulic pump type: B1A8E -Pump max. pressure: 80 bar -Pump max. flow rate: 12 l/min -1x Drive: 1.1 kW 1400 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 500/410/H670 mm -Weight: 100 kg

Year of construction: 2011, condition: used, We offer this used Mecc Alte ECO 32-2L/4 emergency generator, manufactured in 2011. Type: ECO 32-2L/4 Nameplate ID: 0001525665 Date of manufacture: 09/2011 Number of phases: 3 Continuous operation: S1 Nledpfx Afoz Eiqqs Sog Rated speed: 1500/1800 rpm Insulation class: H Rated power (40 °C, 50 Hz): 60 kVA Rated voltage (40 °C, 50 Hz): 115/200/230/400 V Rated current (40 °C, 50 Hz): 301/173/151/86 A Rated power (40 °C, 60 Hz): 72 kVA Rated voltage (40 °C, 60 Hz): 138/240/277/480 V Rated current (40 °C, 60 Hz): 301/173/150/86.6 A Rated power (27 °C, 50 Hz): 62.5 kVA Rated voltage (27 °C, 50 Hz): 115/200/230/400 V Rated current (27 °C, 50 Hz): 314/180/157/90.2 A Rated power (27 °C, 50 Hz) – 2nd set: 75 kVA Rated voltage (27 °C, 50 Hz) – 2nd set: 138/240/277/480 V Rated current (27 °C, 50 Hz) – 2nd set: 314/180/156/90.2 A Protection class: IP21 Weight: 286 kg Moment of inertia: 0.54 kg·m² Bearing designation: 6309.2RS If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2021, Used clean air dust collector with frequency converter Year of manufacture: 2021 Max. volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter area Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ safely maintained (wood dust) Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system 350+ P Suction nozzle 355 mm Motor rated power 15.0 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Weight 1,074 kg Location: in stock at warehouse 54634 Bitburg - immediately available - Njdpfx Afjzizz Sj Solg

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_6, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive Nedez A U H Espfx Af Sslg TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Press force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS with back gauge Weight 8800 kg without tools, tooling system probably TRUMPF Nlsdpfxez A Ia So Af Sog Machine is not functioning, control system does not boot up. The parameters are probably lost.

Condition: used, Year of construction: 2022, Suction nozzle diameter: 350 mm Volume flow: 6927 m³/h Volume flow monitoring: pressure difference indicator Negative pressure: 2543 Pa Filter area: m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: 65 dB Filter cleaning: pneumatic, jet cleaning Motor power: 11 kW Frequency inverter: yes Njdpfxsz A D U Es Af Sslg Machine length: Machine width: Machine height: Weight:

Condition: used, Year of construction: 2013, functionality: fully functional, 2 units available, including silencer and gas control unit. Nlsdpfxsz D S Ngs Af Seg

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG75/D K/RT50 Pressurized water temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial applications in plastics processing, especially for the temperature control of injection molds and other process tools. Manufacturer's serial number: 102010170001, Year of manufacture: 2009 Nlodpfx Aez Au Hbjf Sog Temperature: max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 100 l/min Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooling unit) Pump motor power: 1.5 kW Continuous sound pressure level

Condition: good (used), Year of construction: 2001, Hydro-pneumatic drive Nlodpfx Aoz D Aztef Seg Operation via foot valve Rod force at 10 bar = 50 kN Maximum installation height: 140 mm Rod stroke: 40 mm Outreach: 110 mm Includes: Base frame Rotating table for 5 tools

Condition: ready for operation (used), TETRA THERM ASEPTIC FLEX 10 UHT ASEPTIC MILK PROCESSING Nledpoz Dpuyjfx Af Sog YOM 2004 INCLUDING: - TETRA THERM ASEPTIC FLEX 10 PLATE STERILIZER, MODEL TA FLEX 10 PHE PLC ALLEN BRADLEY -TETRA ALEX 30 HOMOGENIZER, 2-STEPS, NON-ASEPTIC CAPACITY 8 TONS PER HOUR EXCELLENT CONDITION LOCATION - POLAND