Used Umformtechnik Hausach Gmbh 10495 for sale (68,549)

Condition: good (used), Used stainless steel container / transport container / IBC Final use: Chemicals Tank cleaned and with hazardous goods approval up to 10/22 Item number: 10495 Volume: 500 litres Type: Standing in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Hjdpfx Asflrhqok Del Design: Single wall Base: Vaulted Topsoil: Vaulted Operating pressure according to type plate: +0.1 Bar Tank dimensions: total width: 1200mm total length: 1000mm total height: 1000mm materials: Interior: 1.4301 / AISI 304 Exterior parts: Galvanized steel facilities: Nameplate: Yes diameter outlet: approx. 70mm Outlet Type: Disc valve Outlet valve: Yes Manhole cover 400mm with clamping ring

Condition: good (used), Used stainless steel transport container / silo Number of pieces: 17 Item number: 10440 Last use: Unknown Capacity: 650L Type: Standing in galvanized frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall bottom: conical bottom Topsoil: Vaulted Operating pressure according to type plate: ATM Tank dimensions: distance drain to floor: 250mm Hodpfed Sw Dfex Ak Del total height: 1655mm total width: 830mm total length: 1030mm materials: Interior: 1.4301 / AISI 304 Outside: Galvanized steel facilities: Nameplate: yes Discharge: DN80 Outlet valve: Camlock Top panel completely removable

Condition: used, Quantity available : 5 unitsVolume: 2000 LMaterial : Stainless steelWeight : 260 KgTop opening: Ø 50 cmPressure lift valve: Ø 40 cmDimensions : 115 x 115 x 220 Hsdpfjx R Am Ujx Ak Dsl

Condition: good (used), Used stainless steel container / transport container Article number: 10851 Last intended use: paint industry Volume: 1000 L Type: Standing in stainless steel frame Material (in contact with media): 1.4301 / AISI304 Manhole: Ø 400mm Operating pressure according to type plate: ATM Container dimensions: Total width: 1050mm Total length: 1050mm Total height: 1820mm Cylinder height: 1000mm Materials: Inside: 1.4301 / AISI 304 Frame: 1.4301 / AISI 304 Facilities: Type plate: Yes Hsdpfx Akjvtbqlo Djl Height of feet: 420mm Empty weight: 141Kg without outlet

Condition: used, Used stainless steel container / transport container Containers are completely emptied and rinsed! Item number: 10841 Last intended use: unknown Volume: 800L Type: Standing in galvanized stacking frame Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Operating pressure according to nameplate: +0.1 bar Container dimensions: Total width: 1030mm Total length: 1230mm Total height: 1400mm Hsdpfjv Dun Sex Ak Dol Materials: Inside: 1.4301 / AISI 304 Outside parts: Galvanized steel Facilities: Dome cover on the top floor 400mm Safety valve on the top floor Nameplate: Yes Outlet diameter: 42mm Outlet type: Ball valve

Condition: good (used), Used stainless steel container / transport container / IBC Last use: paint production Item number: 10861 Volume: 445 liters Type: Standing in galvanized stacking frame Material (in contact with media): 1.4301 / AISI304 Manhole 400mm Design: Single-walled Hodpfx Aov Au Upek Dol Operating pressure according to nameplate: 0.10 bar Container dimensions: Total width: 83mm Total length: 1030mm Total height: 1160mm Materials: Inside: 1.4301 / AISI 304 Outside parts: Galvanized steel Facilities: Nameplate: yes Outlet diameter: 50mm Outlet valve: Valve Distance from drain to floor: 220mm Empty weight: 138Kg

Condition: good (used), functionality: fully functional, usable tank capacity: 1,000 l, empty load weight: 228 kg, water tank capacity: 1,000 l, Equipment: type plate available, 1000L Stainless Steel Tank | Umformtechnik Hausach | UN Approval | V4A 1.4571 | Used For sale is a used 1000-liter stainless steel tank manufactured by Umformtechnik Hausach GmbH. The tank is made from high-quality stainless steel 1.4571 (V4A, AISI 316Ti) and features UN approval (UN 31A/Y/11) for the storage and transport of hazardous goods. It is ideal for use in the food industry, chemical sector, agriculture, or for industrial storage applications. The tank is in well-maintained condition, leak-proof, clean, and immediately ready for use. It is equipped with a robust tubular frame construction including forklift pockets and a secured manhole cover. — Technical data: Hsdpfx Asxgurfok Dsl • Capacity: 1000 liters • Material: Stainless steel 1.4571 (V4A, acid and chemical resistant) • Permissible gross weight: 2100 kg • Empty weight: 228 kg • Minimum wall thickness: 1.5 mm • Permissible filling/drainage pressure: 0.10 bar • Test overpressure: 0.20 bar • Serial number: 114318 • UN approval: UN 31A/Y/11/…/BAM 0010/12420/2100 — Condition: Used, but in good condition – no damage or corrosion. Cleaned inside and out. Ideal for storage or transport purposes.

Condition: good (used), tank capacity: 1,000 l, Used stainless steel tank / transport container / IBC Last application: Oil production Article number: 10889 Volume: 1,000 liters Type: Vertical, in galvanized stacking frame Material (product-contact): 1.4301 / AISI304 Manhole: 400 mm Design: Single-wall Operating pressure (nameplate): +0.20 bar Tank dimensions: Overall width: 1030 mm Overall length: 1230 mm Overall height: 1650 mm Materials: Interior: 1.4301 / AISI 304 Exterior parts: Galvanized steel Equipment: Hedpsxzq D Hefx Ak Del Nameplate: yes Outlet diameter: 47 mm Outlet valve: Disc valve Distance from outlet to floor: 220 mm

Condition: excellent (used), Year of construction: 2016, We offer here a used rotary indexing table of the brand Weiss. The turntable has a load capacity of approx. 30 tons and a diameter of approx. 3.5m as well as a dead weight with motor of approx. 6500Kg. The control of the turntable is also available, with SEW frequency converter, braking resistor etc.. Hsdpfxoni Awps Ak Del All documentation is available.

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, controller model: SPS-Steuerung, working width: 300 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, number of drawers: 1, positioning accuracy: 1 mm, working height: 30 mm, working length: 400 mm, working range: 400 mm, Equipment: CE marking, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary Hodpjyx Hgbjfx Ak Dsl • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm Hsdoyxccrepfx Ak Dsl - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand Hsdpfxjxt Dk Rj Ak Dol The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: new, Year of construction: 2022, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg Hedpfoyx Hrksx Ak Dol • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: used, weight of the machine ca. 110 kg Hedpfx Ajwf Rg Sok Djl dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding Hedpfx Akswf Rg Ee Dol (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). Hedpfjwf Rgxjx Ak Del --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). Hodpfjwf Rgrex Ak Djl --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) Hjdpfxeif Ek Rj Ak Djl The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool Hedjfnlkwjpfx Ak Dol • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: ready for operation (used), Chip Conveyor, Screw Conveyor, Double Screw Conveyor, Used Machine Manufacturer: Ventilatorenfabrik Oelde GmbH Overall dimensions: Width: 9460 mm Depth: 1340 mm Height: 2300 mm Hsdpsy H I Uijfx Ak Dsl Trough dimensions: 8830 × 900 × 340 mm Feed opening: 1230 × 1200 mm Discharge opening: 730 × 535 mm Electrical data: 400 V Double screw conveyor system.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes Hodpfxswgc I Rj Ak Dol • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Hsdpefhgvwsfx Ak Djl Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Entry-level model panel bender bending center Hedpfx Ajy H Huhek Djl For detailed information and a personalized quote, please send us your inquiry. We will process it as quickly as possible and get in touch with you.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 2,400 mm, loading space length: 4,000 mm, loading space height: 2,600 mm, Equipment: lighting, The Villex Mini Cube Nero 1.0 from Villex Container GmbH is a versatile 4.0-meter container that combines a compact footprint with a surprisingly spacious interior. Measuring 4.0 m in length, 2.4 m in width, and 2.6 m in height, this model offers more space than smaller alternatives while remaining easy to transport. Its 5 cm thick insulation ensures effective thermal protection, while the anthracite-colored panels and base frame (RAL7016) provide a modern and stylish look. The container is equipped with a robust steel door and a standard window (1000 x 1000 mm) for ample natural light. Electrical fittings include a 32A CEE plug, three double power sockets, two LED lights, and a light switch. Weighing just 800 kg, the Villex Mini Cube Nero 1.0 is lightweight, highly portable, and suitable for a wide range of applications. Article number: MINCN1.0 Version: 4.0 m container Length: 4.0 m Width: 2.4 m Height: 2.6 m Insulation thickness: 5.0 cm Panel color: RAL7016 (anthracite) Base frame color: RAL7016 (anthracite) Hsdey H Huzspfx Ak Djl Weight: 800 kg Doors: 1 steel door Windows: 1 standard window (1000 x 1000 mm) Electrics: 32A CEE plug, red; 3 double sockets; 2 LED lights & 1 light switch

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, overall weight: 800 kg, loading space width: 2,400 mm, loading space length: 4,000 mm, loading space height: 2,600 mm, Equipment: lighting, We are offering our Villex Mini Cube Nero 2.0 container in this listing, which can be used as an office container, school container, kindergarten container, refugee container, residential container, or construction site container. Dimensions: 4.0 x 2.4 x 2.6 m Delivery: Nationwide delivery available Standard Features: Condition: New & Fully Assembled Exterior color: RAL 7016 (anthracite) Exterior wall thickness: 50 mm Area: 9.6 m² Weight: 800 kg 1x entrance door (205 cm x 105 cm) 1x double window -> single sash, fixed glazing, and tilt function Electrical installation: 6x electrical outlets (3x double sockets), circuit breaker + protection, surface-mounted conduit (PVC) We manufacture your container fully customized to your specifications! Optional features available at surcharge: Custom sizes, e.g., 7x3 m, 4x2.4 m, double containers, triple units, and more Different window sizes Hsdpfsy Egq Hox Ak Djl Various exterior and floor colors Practical forklift pockets Lighting Roller shutters Heating WC, shower, toilet, wash basin Kitchen Plastered interior walls And much more Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance by PayPal or bank transfer. Nationwide delivery time is typically around 1–3 weeks after receipt of order, depending on the destination postcode area. Custom containers are manufactured and delivered within 1–4 weeks.