Used Turning Tools (2 Pieces) for sale (99,336)

Condition: good (used), Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool Nwjdpeb A Hf Nofx Ad Ssh -Length: 300/230 mm -Height: 35 mm -Weight: 4 kg

Condition: good (used), Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, cranked clamping irons -Manufacturer: AMF, Clamping tool, cranked clamping iron, 2 pieces Nwedpfxszfia Ie Ad Seh -Type: 18x160 -Dimensions: see photos -Price/Fee: complete -Dimensions each: 163/50/H170 mm -Weight: 1.8 kg

Condition: used, Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -different recordings: 10 -from: WNT-Mastertool -Sale: only complete -Price: complete -Weight: 36 kg Nsdpfxsd R Exmj Ad Sewh

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 65/49 mm -Recording: dimensions see photos -Price: complete Nodpfef Nrp Tox Ad Sowh -Dimensions: 195/400/H220 mm -Weight: 42.7 kg

Condition: good (used), Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, bar gripper, thread cutting head, boring bar holder Nedsgl Duhjpfx Ad Sjwh -Number: 25 pieces turning tools -Take: Ø 30 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/655/H630 mm -Weight: 34 kg

Condition: good (used), collet chuck, tool holder, tool holder, milling chuck, milling tool, cutter head holder, milling mandrel, power chuck tool setting device, power chuck tool presetting device Nedpfx Adjvm S Ibj Sowh -Manufacturer: Oertlieb Gühring, power chuck for tool presetting device 2 pieces -Type: Ortlieb K5 / Gühring TGZ 38 GM300 -Individual components/dimensions: see photos -Price/Delivery: complete -Transport dimensions: 265/132/H175 mm -Total weight: 9.1 kg

Condition: good (used), Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, quick-change tool holder -Turning tool holders: Tool holders 43 pieces -Tool holders: various designs -Inset prism: 110/94 mm -Dimensions: see photos -Sale/Price: complete Nsdpfep E Hz Nex Ad Sowh -Transport dimensions: 1200/800/H200 mm -Weight: 450 kg

Condition: used, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps -Clamping tool: cranked clamp, 2 pieces Nwjdpfx Adsuqf Tzs Sjh -Clamping iron: 160/60/H55 mm -Groove: 55 x 23 mm -Slot nut: slot width 21/35 mm -Price/Delivery: complete -Transport dimensions: 160/120/H150 mm -Total weight: 4.9 kg

Condition: used, Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 2x spindle tools Nodpfoc U Tzpjx Ad Sjwh -Adjustment: SK50 -1x shaft size: Ø 50 x 250 mm -1x shaft size: Ø 63 x 200 mm -Price: complete -Weight: 13.2 kg

Condition: used, Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, driven tool, bar gripper, thread cutting head -Manufacturer: Sandvik, 17 pieces turning tools with tool stand -Socket: Ø 40 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole Nwjdpfx Aogl Dutsd Sjh -Dimensions: 400/660/H500 mm -Weight: 25.6 kg

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC Nwsdpfx Adjya H Nko Soh For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: SOP10107, travel distance X-axis: 355 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 455 mm, table width: 381 mm, table length: 457 mm, spindle speed (min.): 10,000 rpm, number of slots in tool magazine: 8, XYZ Machine Tools XYZ 2-OP (2020 Model) Upgrade your workshop with this reliable and high-performance CNC machine from XYZ Machine Tools Ltd, a trusted name in precision engineering. Machine Specifications: Feature Spec / Capability Travel (X × Y × Z) ~ 355 mm × 305 mm × 455 mm Table size ~ 457 mm × 381 mm Max work load ~ 250 kg Spindle BT30 taper, 10,000 rpm, ~ 3 hp (≈ 2.2–2.3 kW) motor Tool changer 8-station automatic tool changer Rapid traverse ~ 15 m/min (X/Y/Z) Control ProtoTRAK TMX conversational CNC (menu-driven, with G-code compatibility), USB file transfer Accuracy / repeatability Positioning accuracy typically around ±0.005 mm (varies with condition), repeatability ±0.003 mm Footprint ~ 760 × 1,220 mm, ~ 2.5 m tall Machine weight ~ 1,100 kg • Year of Manufacture: 2020 • Rated Voltage: 400V • Full Load Current: 15A • Short Circuit Rating: 10kA • Phase: 3 • Cycle: 50Hz • Main Motor Power: 2.2 kW • Max Spindle Speed: 10,000 RPM • Pneumatics: 6 bar / 100 L/min • CE Certified _____ Practical machining use • High-speed drilling, tapping, and small-tool milling: The 10k rpm spindle makes it much better for smaller cutters (Ø3–10 mm) and aluminium machining compared to the older 6k rpm version. • Secondary ops & light milling: Great for “clean-up” cuts, bolt holes, chamfers, flat milling, and side ops after turning. • Batch work with multiple ops: The 8-station tool changer is limiting, but with smart tooling (spot, drill, tap, end mill, chamfer, face) you can cover a lot. • Compact footprint: It can be placed near lathes or VMCs to absorb “2-op” bottlenecks. Condition: • Excellent working order • Lightly used, well-maintained. Has only been used to make Aluminium and Nylon shop fittings. • Ready to go straight into production Why Choose the XYZ 2-OP? • Precision engineering and durability • High spindle speed and robust motor for versatile machining • Compact and efficient design • Backed by XYZ’s reputation for service and reliability Nwsdpfjxd Dgyex Ad Soh Don’t miss this opportunity to own a top-quality XYZ 2-OP machine—perfect for workshops, tool rooms, and production facilities looking to boost their machining capabilities.

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Nwjdpfxjydvzdj Ad Seh Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces Njdpfjzg Urljx Ad Sewh -Roller spacing: 320 - 915 mm -Rollers: Ø 190 x 100 mm -Load capacity: kg -Submission/Price: complete -Transport dimensions: 1000/435/H240 mm -Weight: 70 kg

Year of construction: 1995, condition: used, Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - Insulated and clad - Stand frame, short - Cleaning air fitting with safety valve Additional title: Refrigerated stainless steel tanks for outdoor installation Capacity: 74480 l Operating pressure: 0,9 bar Width: 12,55 m Nwjdpszgcvlefx Ad Ssh Height: 3,27 m Material: Stainless steel Position: vertical Base construction: short supporting skirt Features: Cooling: 1 x side wall cooling jacket; insulation; dearation and cleaning combination with safety valve; temperature measurement

Condition: used, 2 pieces of BERNADO RB 3 roller conveyor – used Steel rollers ----- Technical data ----- Roller conveyor length: 1,800 mm, Roller diameter: 38 mm, Nsdpfx Adjzf Ndyo Sswh Height adjustment: 640 - 1,100 mm, Load capacity: 500 kg

Condition: good (used), Stop for press brake, bending machine, guillotine shear..., cross table -Stop: Stop clamping angle universal stop 2 pieces -Groove width: 17 x 102 mm -Hole: Ø 40/16 mm -Dimensions: see photos -Submission/Price: complete Nwedszf D I Tspfx Ad Seh -Dimensions: 170/50/H40 mm -Weight: 1.0 kg

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Nsdpfjxn Ax Aox Ad Sswh

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 2 pieces -Tire size: 18 x 7 - 8 SC 10 RIM 4.33 R -Bolt circle: Ø 140 x 18 mm -Hub bore: Ø 111 mm -Price/Fee: complete -Dimensions: Ø 445 x 155 mm Nwjdpfxjzfvu Eo Ad Sjh -Weight: 25 kg/piece

Condition: good (used), Tires, solid rubber tires, forklift tires Nedpfx Aezfvuxjd Sjwh -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 2 pieces -Tire size: 18 x 7 - 8 SC 10 RIM 4.33 R -Bolt circle: Ø 140 x 18 mm -Hub bore: Ø 111 mm -Price/Fee: complete -Dimensions: Ø 445 x 155 mm -Weight: 25 kg/piece

Condition: good (used), Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves Nwedpfxjzdyp Rs Ad Soh -Milling tool holders: SK40 13 pieces -Type: various designs, see photos -Price/Fee: complete -Transport dimensions: 400/400/H80 mm -Total weight: 24.5 kg

Condition: excellent (used), functionality: fully functional, Tool holders, tool mountings - VDI40. The holders have been inspected and are in very good, almost like-new condition. The outstanding quality of well-known manufacturers guarantees high repeatability and very long service life: Order No.: 435_C1 → In stock: 2 units; Price: €56.00/unit Order No.: 430_C2 → In stock: 3 units; Price: €56.00/unit Order No.: 432_B4 → In stock: 2 units; Price: €56.00/unit Order No.: 433_B4 → In stock: 2 units; Price: €56.00/unit For orders of 4 units or more, the above prices include shipping within Germany (BRD). Single unit price: €65.00 net each, plus shipping costs. B3 with right-hand rotation; B4 with left-hand rotation; C1 with right-hand rotation; C2 with left-hand rotation. ----- Short reverse VDI radial tool holder. Nwjdpfx Adezf Hqdo Ssh Tool holder for mounting external turning tools in the normal position, i.e., with carbide inserts facing upwards: C1 with right-hand rotation; C2 with left-hand rotation. Shipping costs: on request. ----- Dimensions: D = 83 mm d-2 = 83/40 mm (45.52) H = 32.5 mm L1 = 75 mm L2 = 22 mm l-4 = ----- Further VDI40 holders available in our other listings, e.g., VDI40 Form E2 For drilling tools with cylindrical shank with internal and external coolant supply Surface hardened, blackened, and ground finish.

Condition: excellent (used), Rotary cutting tool with rotating cutting insert Nwjdpfx Aod Hflaed Sjh Type: RRSDR 3232P12 Manufacturer: Mitsubishi Length: 165 mm

Condition: used, Plate assembly, clamping plate with T-slots 8000 x 2100 mm, 2-piece Clamping surface: Length: 8000 x Width 2100 mm Plate thickness: 360 mm Nodpfezc Nt Djx Ad Sswh - Consisting of 2 clamping plates with 7 T-slots each (Length 4000 x Width 2100 x Plate thickness 360 mm) Transport dimensions: 2 plates stacked on top of each other Plate assembly: Length 4000 mm x Width 2100 mm x Height approx. 900 mm Transport weight of plate assembly: approx. 14 tons Good condition

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Manufacturer: Steinel, 2-column punching tool -Hole: Ø 40 mm -Intermediate dimension: 165 mm -Punch dimensions: 1x Ø7 mm / 1x radius 13 mm, see photos with dimensions Nodjzcwlnepfx Ad Sswh -Dimensions: 295/235/H250 mm -Weight: 19 kg