Used Turbo Transfer System for sale (35,602)

Year of construction: 2017, condition: ready for operation (used), The Trans-Blot Turbo transfer system combines traditional blotting techniques with modern filter paper and buffers, allowing rapid transfer of proteins from gels to membranes with minimal preparation time. The system integrates a high amperage power supply that directs current between a built-in platinized titanium anode and a stainless steel cathode. This enables highly efficient and rapid transfer in as little as 3 minutes. The entire system is in a ready-to-use format that allows researchers to obtain their results faster and easier, with reproducibility that is difficult to achieve using traditional blotting methods. Rapid transfer — transfers mini or midi gels in as little as 3 min Dsdpfx Aisy D D Rhswjkl High throughput — can transfer 1–4 mini or 1–2 midi gels in a single run Greater transfer efficiency — higher transfer efficiency compared to other transfer methods Flexible design — allows user to customize transfer conditions and is compatible with traditional semi-dry consumables Environmentally friendly — environmentally safe consumables eliminate disposal cost Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2011, We are pleased to present for Sale the Automatic transfer system TREC NT from Stork. Manufacturer: Stork Type: TREC NT Year: 2011 Iasbor Igpgstt Shdfor Dedpswdibxefx Aiwskl Capacity: 13500bph Condition: Used/Very good

Condition: excellent (used), THERMAL TRANSFER PRINTING SYSTEM WITH PUNCH (printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced Dsdsvf Ig Djpfx Aiwekl

Condition: used, Year of construction: 2019, functionality: fully functional, input frequency: 50 Hz, Complete Fuel Polishing & Storage System – 130,000 L Capacity Available for immediate decommissioning from a data centre: a fully equipped fuel storage and polishing system designed for reliable diesel generator operation. Main Components: Fuel Transfer Pumps (x4) Independently controlled via front-panel PLC Operational indicators and flow meters (L/h) Filtration Units (Filtertechnik) High-efficiency diesel filtration skids Integrated monitoring and alarm panels (differential pressure, overload, emergency stop) Electrical Control Panels Dkjdpfxjw Hdg Us Aiwjl Manual/automatic operation modes System status and fault indicators (low flow, bypass, pre-alarm) Emergency stop functionality Underground Diesel Storage Tanks (x4) Total capacity 130,000 litres Connected via reinforced piping and fuel supply lines Fuel Pipework & Monitoring High-grade piping with safety valves and pressure sensors (Barksdale, Pyropress) Designed for safe and precise operation External Housing – Fuel Pump Room Weather-resistant metal cabin with safety signage (“Highly Flammable”) Internal insulation for added protection This system is ideal for data centres, industrial facilities, or any large-scale diesel generator installations, offering high reliability, complete monitoring, and easy relocation.

Condition: new, Bar Transferred Conveyor Systems These are conveyors which provide to be manually or automatically transferred among required processes until completion of the surface finishing and painting processes after the product to be painted is hung to the conveyor. Application of the processes can be carried out automatically based on the demand and the project. It provides a considerably high space and energy saving compared to continuous conveyor systems used in the facility where full automatic systems are operated. Based on the product weight, closed type Cardan and IPN rails can be used. • These conveyor systems, which have a wide range of carrying capacity, can move manually or semi-automatically vertically and horizontally, allowing the bar transport between processes. • This system provides higher efficiency in smaller installation spaces with low fuel consumption. • It works in the Power & Free conveyor logic, but is less costly and semi-automatic. Dedpfx Asdy Ey Doiwokl • It is easier to hang heavy items on the moving bar with the elevator unit that can be integrated into the system.

Condition: new, 🚀 Modular powder coating systems with bar transport system Our modern painting systems with bar transfer systems offer maximum flexibility with minimal space and energy consumption. All process steps – from pretreatment to oven drying – can be carried out in a single, continuous line. 💡 Ideal for the following applications: Powder coating and wet painting Sandblasting Chemical pretreatment Baking and cooling 🔁 Intelligent transfer system The transport system moves the workpieces safely and efficiently through all stations of the system: Manually or motor-operated Optionally with a lifting device for heavy workpieces Parking stations for buffering and intermediate storage Compatible with automatic paint booths and walk-in booths The movement is fully automated with a continuously variable drive that enables precise control of cycle times. 🏗️ Structure & Components: Monorail conveyors for longitudinal movement Cross-guide units for direction changes Mobile carriages with product holders Load-bearing steel structure for continuous loads Dkodpfx Aiedy Ezdswjl Control via control panel with speed control ⚙️ Efficiency through sophisticated design The system allows contactless handling – the workpiece is suspended at the loading station and remains in the same position until removed. This ensures consistently high quality and minimizes handling times. 🔧 Lifting device for loading and unloading The integrated bar lifting device enables ergonomic and safe working with heavy parts. Operators can precisely position the lifting bar at the push of a button (raising/lowering) – ideal for large components. ✅ Your benefits at a glance: Fully automated material flow For workpieces of any size and weight Reduced space requirements Minimal maintenance, maximum service life High energy efficiency Adaptable to your individual requirements This solution is perfect for modern coating processes where flexibility, ergonomics, and efficiency are paramount. Our experienced engineering teams will adapt the system precisely to your production requirements. 👉 Contact us for a customized solution or visit our website for more information.

Condition: good (used), Offer 23501 Gas transfer system with pressure reducer + separator Technical data approx: - Gas transfer system for nitrogen , argon , forming gas , hydrogen - from plasma cutting system + flame cutting system make ESAB - mounted on stainless steel plate as shown - div . pressure reducer + separator - Weight approx. 80 kg Dedpfxsrf Uqzo Aiwekl - Space requirement system approx. W 1.6 x H 1.5 x D 0.2 m

Year of construction: 2009, condition: excellent (used), stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC Dodpfxodwhf Nj Aiwekl

Condition: good (used), Year of construction: 2011, Turbo Rotary Rotary filling line Serial: R0061192 2011, Stainless, rotary filling line, consists of Turbo D253P depositor, denester, lid applicator and lid sealer and outfeed conveyor, previously used for filling four pots of sauce in a multipack, tooling dimensions 100mm x 100mm, touch screen controls, 3Ph Djdpfsr Uftrsx Aiwjkl

Year of construction: 2003, condition: like new (used), machine/vehicle number: D150P511007, 2003, stainless single shot depositor, rise and fall head, 25L depositor, mobile frame, Dodpfx Aiedwhfgjwokl

Condition: good (used), Turbo systems stainless depositor Dkjdpfeffh Adsx Aiwel Model: D900 Stainless depositor, 25Kg hopper, variable speed, hand operated trigger for discharging product

Condition: new, table length 1500 mm Dodpfx Aisy N D N Uswjkl table width 1500 mm table height 150 mm bore 28 mm weight 543 kg

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: Djdpfjy I Tq Ssx Aiwekl - Gutters - Gutter ends - Connectors - Corners - Brackets - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. All equipment is connected and can be inspected in operation to see the full production process.

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking Dkedjyc H R Topfx Aiwsl • Device inspected (TBM inspection stickers)

Condition: excellent (used), I am offering a professional DELO dispensing system – DELO-DIV pilot with a DELO-DIV VD450 manual dispenser. This equipment is designed for precise and controlled dispensing of adhesives and various media in industrial applications. The system is ideally suited for use in: • Electronics manufacturing • Automotive sector • Precision assembly • Laboratories and R&D • High-repeatability technical bonding processes Operation is managed via the DELO-DIV pilot touchscreen panel, which allows: • Saving and selection of dispensing programs • Manual dispensing (manual mode) • Precise adjustment of working parameters • Intuitive operator interface The DELO-DIV VD450 manual dispenser ensures high application accuracy and process stability. Dkodpfx Aioyc H U Sjwsl — Condition • Used • Fully functional • Normal signs of use • The unit powers on and responds correctly (visible in the pictures) — Set includes • DELO-DIV pilot controller (touchscreen panel) • DELO-DIV VD450 manual dispenser • Cables / connectors as shown in the photos — Additional information • Manufactured in Germany • CE / UKCA marking • Ideal for production facilities and process integrators

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf Dkjdpsyc H I Sofx Aiwel • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Dedpfx Aoyvv Treiwjkl Monitor Control unit Keyboard and mouse Wiring

Year of construction: 2002, condition: good (used), System Tm hydraulic lifting table with roller conveyor on top Dkedpfsy Rffaex Aiwjl Length 5m width 1.3m Extra roller conveyor length 3.6m and 1.3m wide rollers Max lifting capacity 4000 Kg

Condition: good (used), axle configuration: 3 axles, first registration: 03/2021, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,830 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2021, Equipment: ABS, = Further options and accessories = - EBS = Remarks = Number of axles: 3, tare weight: 8,070 kg, gross weight: 43,000 kg, chassis type: full chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air suspension, ABS, EBS, body year: 2021, axle type: SAF, MEGA DOUBLE-DECK // HARDWOOD FLOOR // SAF DISC BRAKES / LIFTING AXLE = Further information = General Information Cab type: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tyre size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lifting axle; left tyre tread: 6 mm; right tyre tread: 4 mm Axle 2: left tyre tread: 12 mm; right tyre tread: 11 mm Axle 3: left tyre tread: 4 mm; right tyre tread: 4 mm Weights Unladen weight: 8,070 kg Payload capacity: 34,930 kg Gross vehicle weight: 43,000 kg Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price classes. Why buy from Kleyn Trucks? Simple! • Large, fast-rotating stock • Recognizable quality • Competitive pricing • Reliable business practices • Multilingual service • We understand our customers • Support with import and transport • (Export) registration plates arranged promptly • Expert technical services • The security of 'recognizable quality' • And more ... Please visit our website for special offers and the complete stock list: Djdey Irnvspfx Aiwjkl Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty package.

Condition: ready for operation (used), functionality: fully functional, working width 1300mm rotor with 4 brushes edge brush additional outfeed brush variable regulated feeder variable regulated rotor speed variable regulated brushes speed electric regulation of rotor connection 380v Dkjdpfey N Rd Sox Aiwol

Condition: used, table length 1500 mm table width 1500 mm Dksdpoy Ig Rxofx Aiwol

Condition: used, Year of construction: 2017, overall weight: 315 kg, total length: 1,840 mm, total width: 1,180 mm, total height: 1,000 mm, VRF SYSTEM PANASONIC U14ME2E8 40 KW Cooling capacity: 40 kW (27/19°C - 35°C) Heating capacity: 45 kW (7/6°C - 20°C) Year of manufacture: 2017 Dedpfx Aieqz Uciowjkl Type of refrigerant: R410a Number of fans: 1 pcs. Compressors: 2 pcs. Copeland (scroll) Dimensions: 1.84 x 1.18 x 1.00 m Weight: 315 kg

Condition: excellent (used), ESPEC ARS-0680-AE Environmental Test System Type: ARS-0680-AE Manufacturer: ESPEC Design: Environmental Test System with external stainless steel test chamber For sale is a complete ESPEC Environmental Test System for temperature, climate, and automotive testing applications. The system consists of two ESPEC climate test chambers type ARS-0680-AE and an external stainless steel test cell mounted on a mobile frame. The external stainless steel chamber serves as the primary test space for larger samples such as vehicle headlights, lighting modules, electronic components, or automotive assemblies. The two ESPEC climate test chambers generate the required temperature and climate conditions for the external test cell. Condition / Display: Used system, optical condition as shown in the pictures. Both units display STOP / ready for operation. Operating hours according to displays: Approx. 5,887 h Approx. 6,950 h Special feature: Complete environmental test system with external stainless steel test cell. Especially suitable for complex testing applications with larger or externally connected test pieces. Technical Data of Climate Test Chambers: 2x ESPEC ARS-0680-AE Year of manufacture: 2017 / 2018 Test chamber volume: approx. 680 liters each Temperature range: approx. -70 °C to +180 °C Humidity range: approx. 10 % to 98 % r.h. Temperature change rate: up to approx. 4–6 K/min Internal dimensions (W x H x D): approx. 850 x 1000 x 800 mm External dimensions (W x H x D): approx. 1050 x 1955 x 1805 mm Electrical Data: Connection: AC 400 V / 3~ / 50 Hz Max. current consumption: approx. 22–27 A Weight: approx. 505–615 kg per unit Cooling System: Air-cooled cascade refrigeration system No external water connection required Refrigerants according to type plates: R23 – 0.65 kg R452A – approx. 2.1–2.3 kg External Stainless Steel Test Cell: External remote test chamber on a mobile steel frame Large test space for bulky specimens Interior made of stainless steel Front opening with all-around seal Several toggle latches Side feedthroughs / connection ports Shelf / test tray provided Heavy-duty casters Equipment: 2x ESPEC climate test chamber ARS-0680-AE External stainless steel test cell Touchscreen control panel Program and constant operation Temperature and humidity operation Observation window Stainless steel test chambers Interior lighting / chamber lamp Side tube and cable feedthroughs Ethernet interface Specimen temperature input Power supply control for specimen Dkedpfey H H Uhsx Aiwol Time signal outputs Water tank system for humidity operation Mobile design Scope of Delivery: 2x ESPEC climate test chamber ARS-0680-AE 1x external stainless steel test cell on mobile frame Available connection cables / accessories as present Available documentation as present Scope of delivery as shown Note: This is a customer-specific special test system. The two ESPEC climate test chambers and the external stainless steel test cell belong together and are offered exclusively as a complete system. Service / Preparation: Functional check and replacement of necessary components Refilling with legally compliant refrigerant (if required) Leak test with certificate Documented test run Miscellaneous: Inspection possible by appointment Loading can be arranged Commercial sale – Sold without warranty. (Subject to changes and errors)

Year of construction: 1990, condition: ready for operation (used), Boxtaper top/bottom machine has a infeedbelt Mobile Dkedpfx Aijfxxn Hswsl as-is or adjusted to customer needs

Condition: good (used), D&K Europa System B2 Laminator The machine is 100% operational and ready to use. This advanced, high-performance machine is ideal for commercial laminating. Technical specifications: Max sheet size: 540mm x 740mm Min sheet size: 210mm x 220mm Min weight: 115 gsm Max weight: 400 gsm Operating temperature: 80-145°C Weight: 750 kg 380V power supply Chrome-plated steel cylinder Pneumatic clamping, separation, and automatic high-stack feeding. Dkjdpfx Aisy Hgkiewsl Sheet feeding accuracy: ±2.0mm. Touchpad for easy operation. Sheet straightening module. Sheet discharge jogger.