Used Tublorom 85Cbm/100To for sale (23)

Condition: new, Year of construction: 2025, brand new cement silos approx. 85m3/100ton by surcharge with ladder by surcharge with equipment (filter, overfill protection, etc) by surcharge with mobile foundations Hedpsrk Nkwofx Aahop by surcharge with Screw conveyors soon delivery are possible Send us your request and we will be happy to provide you with a tailor-made offer (of course with all possible discounts)

Condition: new, Year of construction: 2025, brand new cement silos approx. 65m3/80ton by surcharge with ladder by surcharge with equipment (filter, overfill protection, etc) by surcharge with mobile foundations by surcharge with Screw conveyors Hsdpsrk Ni Djfx Aahjp soon delivery are possible Send us your request and we will be happy to provide you with a tailor-made offer (of course with all possible discounts)

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 131 644, Attention: machine has been 2022 completely mechanically and electrically retrofitted before delivery press force: 1000kN stroke: 30 - 100mm slide adjustment: 80mm speed: 50 - 300/min shut height. 350mm table dimensions: 1080 x 800mm Hsdpfsfn Affsx Aahop slide dimensions: 900 x 620mm new electrical controller SIEMENS S7 1500

Condition: new, Year of construction: 2025, OMCN 100-ton electro-hydraulic press, Model 164/R Hsdpfx Asfh R Nysahsp Made in Italy DOUBLE-SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press with rapid-action motor, pressure gauge, and double-speed hydraulic power unit achieved with a vane pump for rapid approach and return, and with an axial piston pump for the working phase. Equipped with a calibration valve and a three-position control distributor (forward, idle, return). The machine is complete with oil. Supplied with a winch for lifting the worktable. The ram is made of special steel, treated, and chrome-plated. The machine is equipped with two-hand control and synchronization as per current regulations. Complete with protective panels, rear and side. CE approval, including electromagnetic compatibility. Ram stroke: 310 mm Internal width: 1,010 mm

Condition: ready for operation (used), Montronix TS100 Tool Monitor, serial number: T1000022A0964, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hodpfxei Eb R Aj Aahsp

Condition: ready for operation (used), Montronix TS100 Tool Monitor, Serial No.: T1000025A0991, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hsdpfxsi Eb R Hs Aahsp

Condition: used, mileage: 680,000 km, power: 485 kW (659.42 HP), first registration: 06/2008, fuel type: diesel, Equipment: ABS, air conditioning, Volvo FH 16 Hsdpfxoy Rcfds Aahep First registration: km 6x4 Heavy-duty axle I-Shift transmission Leaf/air suspension !!!! 100-ton total weight !!!!! Delivery to the port of Hamburg/Antwerp/Bremerhaven/Rotterdam Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/p?????/?????..... Roman We will be happy to assist you with financing or leasing. EU sales: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 EUR Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation - Transfer from Munich Airport or Passau train station

Condition: excellent (used), Year of construction: 2007, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, FEISSLER machine mounted electronic laser guards , side and rear interlocked fencing Model Amada HFT 100/3 downstroke CNC Press brake Year 2007 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Hsdpfx Aozbql Sjahsp Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Throat Depth 420 mm CNC Control 12000 hours BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Model 100 TON M/H-M/C-2 Hodpfx Aexwk E Asahep Year 2025 Condition New Stock Number 2796 Working Width 1000 mm Stroke 380 mm Max Capacity 100ton

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH CS-100, a 100-ton capacity cement silo, can be safely used in concrete plants, block production facilities, and various ground applications thanks to its high durability and long-lasting structure. This model, which can be produced in either bolted or welded types according to customer requirements, offers easy on-site installation. The bolted version, when produced in two sets, can be transported with just one 40 ft OT container or truck, minimizing logistics costs. The CS-100 is designed with ease of use and safety in mind. The silo features a cement filling pipe, internal and external manholes, a maintenance platform, safety guards, a pressure relief valve, and special roof flanges for the air filter. It is also equipped with a conical flange system for butterfly valve connection. It can be delivered with optional cement screw conveyors, upper-lower level indicators, air fluidization nozzles, and manual discharge valves. Bolted silos are manufactured with high precision using laser cutting and drilling technology. Static and mechanical calculations are performed using ANSYS Workbench CAE software, ensuring deformation-free operation even under a 100-ton load. To increase corrosion resistance, one coat of anti-corrosive primer and two coats of epoxy paint are applied to the silo surface. CS-100 - 100-Ton Cement Silo Technical Specifications Silo Capacity: 100 tons (78 m³) Silo Height: 18,920 mm Silo Diameter: Ø 3060 mm Number of Silo Legs: 4 Silo Outlet Diameter: Ø 300 mm Number of Components: 120 Silo Weight: 8,000 kg Silo Leg Material: 219x5 mm Steel Pipe Silo Leg Supports: NPL 80 mm Metal Sheet Silo Leg Plates: 20 mm Metal Sheet Conical Part Support Material: 100 mm Steel C Channel Conical Part Material: ST-37 - 6 mm Metal Plate Silo Body Material: ST-37 - 5 mm Metal Plate Silo Top Cover Material: ST-37 - 4 mm Metal Plate Filling Pipe: 4" Steel Pipe (Up to Silo Foot) Internal Manhole: Available External Manhole: Available Guardrail on Silo Roof: Available Maintenance Platform: Available Structural Analysis: Production Process Based on Approved Projects Why Choose the CS-100 Cement Silo? Hjdoxpi Iyspfx Aahop At CONSTMACH, we combine high engineering standards, quality control steps, and customer-focused solutions in all our production processes. The CS-100 model stands out with its advantages of safe storage, easy transportation, long-lasting surface protection, and low maintenance costs. Thanks to our extensive service network and spare parts support, you will have made the right choice to increase your business's efficiency. What Does Constmach Do? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Condition: new, pressure: 100motor power: 4messurements (LxWxH): 1.600 x 850 x 2.500oil filling: 29performance of pump: 14,5speed: Vorlauf 8,5 mm/sec, Rücklauf 13,43 mm/secweight approx.: 1.000column width: 1000 x 350Standard Equipment: High-quality hydraulic press can be operated both manually and motorized. Cylinders can be shifted sideways. CE certified Pressure adjustment 1-year warranty Pressure gauge (manometer) User manual (manual) Option :  Hsdpfx Aajnzwhaehsp Clearopening -> 1200 x 400 mm (750 ¤ extra)

Condition: new, TIGERMETAL WH100 – Hydraulic Workshop Press 100 Tons | Electric + Manual Pump Instead of €10,489 gross RRP, now only €6,699 net (€7,972 gross incl. 19% VAT). You save -24% compared to the RRP! The TIGERMETAL WH100 workshop press is a high-performance and robust industrial press designed for demanding applications in workshops, production, and maintenance. With a pressing force of 100 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast operation in automatic mode and precise fine control for sensitive applications. 🔧 Technical Data: Model: WH100 Manufacturer: TIGERMETAL Pressing force: 100 tons Drive: Electric motor + manual pump Motor power: approx. 3 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 320 bar Stroke: approx. 400 mm Working width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 820 kg Advantages: Hsdpfxof Sqcyj Aahjp ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder for flexible positioning ✔ Height-adjustable crossbeam ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The laterally movable cylinder and the height-adjustable working table allow optimal adaptation to a wide variety of workpieces and applications. The massive steel construction ensures maximum stability and a long service life—even under intensive industrial use. The WH100 is the perfect choice for anyone looking to combine maximum pressing power with precise control and industrial reliability. A wide range of additional workshop presses in various designs, sizes, and optional equipment is available! Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. The press can be tested on-site under power. ----- We are happy to provide individual consultation and prepare a tailored offer. Simply send a non-binding inquiry! ----- The stated price is net plus 19% VAT. All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Hedom Nntyopfx Aahop Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: excellent (used), Year of construction: 2005, Technical specifications: Working length: 3100 mm Column width: 2650 mm Press force: 100 tons CNC control: AMADA AMNC PC 3D-graphic 15-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Hedpfx Aajv I Sp Ijhop Dual speed of the X, R, and Z axes Automatic crowning Motorized adjustable backgauge Thrust: 550 mm Stroke: 350 mm Working height: 960 mm Laser monitoring: FIESSLER Motor power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Accessories: 1 set of segmented AMADA tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, - Capacity: 100 tons - Cylinder stroke: 400 mm - Working width: 1000 mm Hodpfx Aaegg Nq Uehsp - Cylinder is movable - Electrically or manually operated - Pressure gauge - Emergency stop - 400V

Condition: new, pressure: 100bending length: 3020column width: 2555daylight: 530stroke lenght (max.): 300column throat depth: 450messurements (LxWxH): 3725x2260x2780weight approx.: 85504 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Esa S630 (2D Grafik Steuerung)motor power: 11 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. Hsdpfxsd En Rxj Aahep CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                           ¤ 4,520.00 ESA 675 W 3D 21'' touch screen control (Windows Base)           ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)        ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)        ¤ 16.350,00 KK Industries GmbH There's something for everyone!

Condition: new, pressure: 100bending length: 2600column width: 2150daylight: 530stroke lenght (max.): 300column throat depth: 450messurements (LxWxH): 3320x2260x2780weight approx.: 79004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 11 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL Hedpfx Asd En Ryoahop The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,529.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)     ¤ 10.165,00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,-- KK Industries GmbH There's something for everyone!

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, pot winch, hydraulic winch, Hydralite Jacks -Max. lifting capacity: 100 tons -Hydraulic cylinder stroke: 160 mm -Number: 2 cylinders available -Quantity: 1x cylinder as spare parts carrier (without pump) -Price/Sale: complete -Dimensions: 400/240/H370 mm -Total weight: 104 kg Hedpfxsc Nir Ts Aahjp

Condition: new, Pressing force: 100 t Maximum stroke: 380 mm Working width between columns: 1100 mm Cylinder diameter: 220 mm Hedpehauyyjfx Aahsp Diameter of the piston rod: 90 mm Diameter of the piston head: 120 mm Pressing speed: 2.47 mm/s Feed speed: 7.54 mm/s Retraction speed: 9.06 mm/s Motor power: 2.2 kW Machine dimensions L x W x H: 1665 x 865 x 2140 mm Weight: 970 kg Accessories / Special features: • Adjustable cylinder • Chrome-plated, hardened piston with detachable base • Integrated pressure gauge • Pressure regulation • Two speeds and regulating valve • Adjustable work table • Joystick for operating the piston • Hand pump with dual operation for highly precise pressing operations • CE compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, machine mounted electronic guards , side and rear interlocked fencing Hsdpfju Iukfsx Aahsp Model Amada HFE 1O3 L downstroke CNC Press brake Year 2001 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7600 kg Bed Length 3000 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Hodpfoyabf Hex Aahop

Condition: used, functionality: fully functional, Year of construction: 2006, 1 used concrete mixing plant Manufacturer: Liebherr Type: Betomix 1.0 Year of construction: 2006 Capacity/h : 60 m³/h compacted concrete Aggrgate inline silo: 120m3 (4 x 30 m³) Mixer: Liebherr ring pan mixer 1.0 Dosing: Aggregates: by weighing belt Hedpfx Aajwk Hxhjhop Cement: cement scale Water: water dosing hopper, Admixtures: Chemical scale / chemical dosing device Control container: include control system: SIMMA silos: 3 X 100to (Transport dimension D=3m, feet can be unscrewed) INCLUDING VARIOUS SPARE PARTS AVAILABLE IMMEDIATELY PRICE INCLUDE DISMANTLING offer and all price are net and ex stock without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like see / how is it – standing or recumbent, subject prior sale IT IS FORBIDDEN TO COPY OR PUBLICATE THIS OFFER BY ANY THIRD PARTIE OR THIRD PERSON

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic SPS press 100to (1.000KN) pressing force Siemens SPS1200 series Screen 10" Beijer stroke 400mm table top 790mm x 600mm Speed forward 110mm Speed return 140mm Light curtain Sick Remote maintenance module built in Rexroth hydraulics with cooler Hodpfx Aaonp Ndhjhep Available from week 46 fairground Stuttgart Modifications can be realized after request if necessary