Used Test Mandrel 50 Mm for sale (92,316)

Condition: used, Heraeus Type: HT 7012 S2 Heraeus Shock Test Chamber Temperature Shock Test Cabinet, Water-Cooled Two-Chamber Design Warm Chamber: The temperature control for the warm chamber ranges from +50°C to +220°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 11 K/min. Cold Chamber: The temperature control for the cold chamber ranges from -65°C to +70°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Temperature range, warm chamber: +50°C to +220°C. Temperature range, cold chamber: -80°C to +70°C. Gujdpfjzd R Azsx Afroh Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm. External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm. Rated power: 10 kW. Rated current: 25 A. Voltage: 3/N/PE AC 400 V +6/-10% 50 Hz. Refrigerant: R404A / R23. Weight: 1000 kg. For your safety as a buyer, please note the following information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. Refilling with refrigerants that comply with legal regulations. 3. Leak test with certificate. 4. After successful inspection, the chambers will undergo a test run, which is monitored with calibrated devices. Condition: used. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Heraeus Type: HT 7012 S2 Temperature shock test chamber, water-cooled Two-chamber design Warm chamber: Temperature control in the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 11 K/min Cold chamber: Temperature control in the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Temperature range, warm chamber: +50°C to +220°C Temperature range, cold chamber: -80°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 hours Weight: 1000 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Godpfx Aezd R Uwefrouh We will be happy to answer any further questions you may have by phone.

Condition: used, Vötsch Type: VT 7012 S2 Water-cooled version Vötsch temperature shock test chamber / environmental simulation system Model: VT 7012 S2 Two-chamber system (hot / cold chamber) For sale is a high-quality Vötsch temperature shock test chamber for rapid temperature change tests in industry, research, and development. The device is in used condition. See pictures for optical condition. Control panel and observation window are included. Temperature data: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +70 °C Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K Heating rate hot chamber: approx. 11 K/min Heating rate cold chamber: approx. 2 K/min Cooling rate cold chamber: approx. 3 K/min Test chamber: Test chamber volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable entry: Ø approx. 67 mm Dimensions: External dimensions: approx. 930 x 2115 x 1970 mm Electrical data: Mains connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerant according to nameplate: R404A: 2.9 kg R23: 1.27 kg Operating pressure ND: max. 22.5 bar Operating pressure HD: max. 25 bar Weight: approx. 1000 kg Equipment / Features: Two-chamber shock test system Rapid temperature change testing Gusdpfxsy Iyuws Afroh Digital control / display Program operation Observation window Cable entry Water-cooled version For your safety as a buyer, the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Scope of delivery: Vötsch VT 7012 S2 temperature shock test chamber Scope of delivery as shown in the pictures Condition & Notes: Condition: used Inspection possible by arrangement Loading can be organized (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: used, Unidentified test mandrel, 50.000 mm, with tapered shank. Gusdpfx Aozrxwpefreh Technical data: - Data 1: H=35.643 - Data 2: ø 50.000

Condition: used, Vötsch Guodjzima Hspfx Afrsh Type: VT³ 7006 S2-M Air-cooled Technical data: Test specimen weight max. 20 kg Test volume: 60 liters Test chamber dimensions: width 380 mm, depth 430 mm, height 370 mm External dimensions: width 875 mm, depth 1970 mm, height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via moving platform) Temperature range of the hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of the cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temperature deviation over time: ±0.3 K to ±1.0 K 80 mm pipe passage for measurement / supply of the test specimen Software SIMCONTROL for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 8.5 kW Rated current: 25 A Refrigerant R-404A R-23 Weight approx. 800 kg For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Zwick Type: BT1-FR050TH.A1K 50 kN Material testing machine Zwick/Roell BT1-FR050TH.A1K material testing machine – Precise strain gauge tests Note: No PC included!! Highlights: Gsdezii Ugepfx Afrjuh Testing force: 50 kN (tensile / compressive) High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-conductor) Measuring range: 0.2 – 165 % nominal value, measurement value acquisition up to 500 Hz Maximum resolution: up to 297,000 points (at 50 Hz) Positioning repeatability: ±10 µm Crosshead speed: 0.0005 – 600 mm/min Robust design, compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth Low noise: 59 dB(A), ambient temperature +10 to +35 °C, humidity 20–90 % Special features: Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: Testing force (tensile/compressive): 50 kN Load frame height: 1,714 mm Overall height: 1,814 – 2,688 mm Load frame width: 760 mm Overall width: 936 mm Load frame depth: 477 mm Overall depth: 722 mm Weight: With electronics unit: 230 kg With typical attachments: approx. 300 kg Condition: used Scope of delivery: (See picture) ZwickRoell BT1-FR050TH.A1K testing machine Operating manual (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Temperature Shock Test Chamber Type: TSS-70/350-A Year of manufacture: 10/2017 Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS GmbH (Clima Temperatur Systeme), model TSS-70/350-A. The device is suitable for temperature shock tests and cyclic temperature tests in industry, research, development, and quality assurance. Areas of application: Material testing Aging tests Electronics and component testing Temperature cycling and shock tests Automotive and quality testing Technical data: Manufacturer: CTS GmbH Type: TSS-70/350-A Design: Shock test / Temperature shock test chamber Temperature ranges: Hot chamber: +50°C to +220°C Cold chamber: -70°C to +100°C Electrical data: Rated voltage: 400 V, 3/N, 50 Hz Rated power: 19.8 kW Rated current: 46.5 A Refrigeration system: Pre-cooling stage: R452A, 7.2 kg Cooling stage: R23, 2.8 kg / 11.0 bar CO₂ equivalent: 15.41 t / 41.59 t GWP: 2140 / 14800 Water-cooled Pressure data / Protection class: Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Protection class: IP 54 Equipment / Features: CTS touchscreen control panel Microprocessor-controlled regulation and monitoring system Program operation Digital setpoint and actual value display 2-zone system with hot and cold chamber Trolley system for rapid temperature shock testing Viewing window in the door Integrated control cabinet Water connections for cooling water available Technical design: Hot and cold chambers are separated Trolley system for rapid temperature change Test chamber made of stainless steel Robust industrial design Connections for cooling water supply and cooling water return available Connection type according to documents: CEE 63A Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram, piping diagram, and installation plan available Spare parts list and quick guide available For your security as a buyer: The following points can be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Optical condition see pictures Gujdpfx Afoy H Hk Aeroh Scope of delivery: CTS Temperature Shock Test Chamber TSS-70/350-A Documentation as available Note: The sale is of a used industrial device. An inspection by arrangement is possible and recommended. Loading and transport can be arranged by agreement. (Changes, prior sale, and errors in the technical data are subject to change!) We will gladly answer any further questions by telephone or message.

Condition: used, CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Guodpfx Ajy Hkgbofroh Electronics and component testing Temperature shock and cycle temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic carriage for shock tests Technical design: Hot and cold chamber separated Carriage system for rapid temperature change Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Other data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: see pictures (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Gjdpey Hkd Hsfx Afreuh Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Professional external micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device is characterized by high accuracy and a robust construction, and its large LCD display enables quick and convenient reading of results. Measurement range: 25–50 mm / 1–2” Resolution: 0.001 mm (1 µm) Functions: ZERO, ABS, REL, TOL Protection rating: IP65 – dust and splash resistant Power supply: CR2032 battery (3 V) Ergonomic, precise construction made of hardened steel Clear LCD display Catalog number: 4157042 Manufacturer: Mahr GmbH – Germany Godpfx Afjz Slhhereuh Included in the set: - Mahr Micromar 40 EWR-S digital micrometer - Measurement standard - Adjustment key - Documentation and operating instructions - Original carrying case Condition of the device: very good – fully functional and ready for use. An excellent choice for industrial plants, precision workshops, and measurement laboratories.

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Gsdpfx Afjz Hwhyjrsuh Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

Condition: good (used), test mandrel, tool holder, milling holder, milling tool -Manufacturer: Bahmüller, boring bar Guedpevz Urxsfx Afreh -Length: L= 158.406 mm -Radius: R= 19.937 mm -Recording: HSK50 -Dimensions: Ø 50 x 183 mm -Weight: 1.6 kg

Condition: good (used), Used fine boring head, manufacturer GEWEFA Guodszy Uiwspfx Afrjh No. / Type 07 026 015 / 50 X 160 --- and --- No. / Type 07 026 012 / 40 X 160

Condition: used, BAT Shaker Fixture Cube / Clamping Cube Magnesium Shaker Fixture Cube Professional clamping cube for vibration testing rigs / shakers with an M8 thread grid for flexible test specimen mounting For sale is a used clamping cube for vibration and shock testing rigs. The adapter cube is used to securely hold test specimens on vibration testing rigs (shaker systems). Thanks to the numerous threaded holes on several sides, a wide variety of devices and test specimens can be flexibly mounted. Gsdpfezkgqnex Afrsuh The lightweight magnesium construction offers high rigidity with a comparatively low weight and is ideal for development, endurance, and environmental testing. Technical data: Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Threaded holes: M8 grid on several sides Dimensions (approx.): 300 × 300 × 300 mm Weight: approx. 28–32 kg (estimated) Features: Solid magnesium design M8 thread grid on several sides Two stop eyes Precision-machined clamping surfaces High rigidity with low weight Ideal for individual test setups Accessories as shown in the pictures Areas of application: Vibration testing rigs Shock testing Environmental simulation Automotive testing technology Aerospace Development and testing laboratories Quality assurance Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear, scratches and marks are present. The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, BAT Shaker Fixture Cube Magnesium Shaker Fixture Cube 400 × 400 × 400 mm Professional fixture cube for vibration test benches, environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of magnesium. The fixture cube is suitable for the flexible mounting of test specimens, measuring setups, and fixtures on vibration test benches. The robust magnesium construction offers high rigidity while maintaining a low weight and is used in testing and development laboratories. Technical data: Manufacturer: BAT Material: Magnesium Type: Shaker Fixture Cube External dimensions: approx. 400 × 400 × 400 mm Threaded grid on all sides Several large through-holes for mounting Robust, precision design Equipment: Magnesium construction Precision-machined mounting surfaces Threaded holes on all sides Large corner holes for mounting Suitable for individual test setups Accessories as shown in the pictures Application areas: Vibration test benches Gsdpfozkhxtex Afrsuh Vibration testing Environmental testing technology Automotive Aerospace Research and development Testing laboratories Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Manufacturer unknown Shaker Fixture Cube / Clamping Cube Aluminum Shaker Fixture Cube, approx. 240 × 240 × 240 mm Godpfx Aszp E Dkefrsuh Professional clamping cube for vibration testing systems, environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube is suitable for the flexible attachment of test specimens, measurement setups, and fixtures on vibration testing systems. The solid aluminum construction offers high rigidity and is ideal for vibration tests, environmental testing technology, mechanical engineering, as well as research and development laboratories. Technical data: Manufacturer: Unknown Material: Aluminum Type: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 precision mounting holes, Ø approx. 85 mm Central through-hole Threaded holes on all side surfaces Precision-machined clamping surfaces Robust industrial design Weight: 30 kg Features: Solid aluminum construction Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through-hole Suitable for individual test setups High rigidity with a compact design Accessories as shown in the pictures Application areas: Vibration testing systems Vibration testing Environmental testing technology Test stands Metrology Mechanical engineering Special machine construction Automotive Aerospace Research and development Testing laboratories Industry Scope of supply: Aluminum Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, Year of construction: 1989, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550Technical Data: Gsdpovaatljfx Afrouh Max. cutting length: 1,550 mm Throat depth (side clearance in frame): 50 mm Sheet passage: 16 mm Cutting angle adjustable: 0.5° – 2°30′ Strokes per minute: 25 – 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil capacity: 300 liters Total connected load: 20.1 kW Overall dimensions (L × W × H): 2,130 × 3,260 × 2,360 mm Equipment: CNC control SIEMENS S5 for numerical sheet metal backgauge control Sheet support device with motorized scrap separator Sheet discharge with conveyor belt Blade clearance and cutting angle programmable via control Spare blades included Shear blades suitable for material up to 750 N/mm² tensile strength Separate hold-down operation for cutting along marked lines Hold-down pressure adjustable and readable from the front 2 swing-away backgauges Finger guard with handle recess Ball rollers integrated in the support table Angle gauge with vernier scale Foot switch Condition:Used, in good condition

Condition: new, Year of construction: 2025, diameter 28 mm length 50 mm clamping range 45-50 mm The price is exclusive of statutory VAT. Also available in D28 x 75 mm (clamping range 70–75 mm). Gusdpfxeymf Ure Afrjh Clamping range: 45–50 mm Type: Ball Lock Pin 50 mm Diameter: 28 ± 0.02 mm Material: 45# steel Hardness: HRC28–32 Surface roughness: Ra 0.8 µm GERD WOLFF ball lock pins are specialized fastening components designed for integration into a wide range of welding table systems and setups. Their main function is the efficient and precise positioning and securing of workpieces. These pins are compatible with welding tables from all manufacturers that feature 28 mm bore holes. The unique ball-lock design enables flexible alignment of workpieces at various angles and positions. Thanks to their high-quality manufacturing and robust construction, GERD WOLFF ball lock pins provide reliable holding force throughout the entire welding process. These pins allow for easy handling, fast clamping, and release of workpieces — without the need for additional tools. GERD WOLFF stands for quality and precision in welding technology. These ball lock pins are engineered to meet the high demands of professional welding applications. Quick release locking pins, quick lock pins, quick releases, quick installation pin, metal horizontal quick release, working pin, quick release locking pin, quick latch pin, locking quick release pins.

Condition: good (used), Year of construction: 2020, operating hours: 10,713 h, load capacity: 5,000 kg, lifting height: 3,850 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, Manufacturer + model:STILL RX 60 - 50 / 600 Mast:2W3850 ID:25011.6088 Cat.:Used Mast:2W Forks:2400 mm Lowered height:2850 mm Lifting height:3850 mm Capacity:5000 kg Year:2020 Hours:10713 hours Gjdpjzuubcofx Afrsuh Capacity:80 v / 930 ah Options:- LINDE steering - Duo pedal!!! - New NON marking!!! - Windshield & Rear window!!!

Condition: used, functionality: unexamined, Ferwood code: RU0011649 - Manufacturer code: K6343K0946 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Gjdpfx Afswtnnpsrouh

Year of construction: 2000, condition: excellent (used), functionality: fully functional, 2 x 50 m³ aluminium silos with long support ring, ø 3,000 mm (plastic granulate silo) Capacity: approx. 50,000 litres Manufacturer: Eichholz Year of manufacture: 2000 Quantity: 2 Diameter: approx. 3,000 mm Guodpfx Asxvtvzjfroh Cylindrical height: approx. 10,000 mm Total height: approx. 11,250 mm Weight: approx. 1,400 kg Bulk density: 0.6 kg/dm³ Material: AlMg3 Connections and fittings: On the top deck: 1 x roof edge guard rail (ø 3,000 x 1,250 mm) 2 x crane eyes 1 x manhole DN 600 with vent nozzle 1 x flange DN 100 (filling) 1 x flange for level indicator 1 x threaded socket 1 1/2" (full indicator) On the shell: 1 x filling line with pipe supports 1 x access door (approx. 850 x 1,850 mm) 1 x cable protection conduit 1 x threaded socket (1 1/2") for empty indicator Silo ends in a 60° cone with emergency shut-off slide valve. Otherwise as per photos

Condition: good (used), Broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle -Type: SW 22 F8x28,35 RL 20-50 mm -Article No.: 24 3039 174 208 020 TKO -Width: square 22 mm / see photos Gsdpfx Afeitt Rgsrouh -Quantity: 2 pieces available -Price per piece -Dimensions total: 920/22/22 mm -Weight: 2.5 kg/piece

Condition: used, Broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle Godpoitt R Isfx Afreuh -Type: SW 22 F8x28,35 RL 20-50 mm -Article No.: 24 3039 174 208 020 TKC -Width: Square 22 mm -Quantity: 3 pieces available -Price per piece -Total dimensions: Ø 22 x 925 mm -Weight: 2.1 kg/piece

Condition: used, functionality: fully functional, Type: BAS Max welding width up to 50 [mm]. Flash Butt welding machine. Manual clamping. Blade width up to 50 [mm]. Used machine in working condition. Gusdpjw Snu Sofx Afreh Machine painted. Weld band saw blades for wood up to 50 [mm]. Weld band saw blades for metal up to 34 [mm]. Delivery from stock. Connection: 220 [V]. Weight: cca. 180 [KG]. Packing included.

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -4 set: hard jaws -2 set: soft jaws Guedpfeqyi U Iex Afroh -Dimensions: see photos / technical. drawing -Price/sale: only complete -Transport dimensions: 480/320/H150 mm -Weight: 57.5 kg